Tatu Ylonen <ylo@cs.hut.fi> - Creator of SSH
-Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
Theo de Raadt, and Dug Song - Creators of OpenSSH
Alain St-Denis <Alain.St-Denis@ec.gc.ca> - Irix fix
- markus@cvs.openbsd.org 2003/11/20 11:39:28
[progressmeter.c]
fix rounding errors; from andreas@
+ - djm@cvs.openbsd.org 2003/11/21 11:57:03
+ [everything]
+ unexpand and delete whitespace at EOL; ok markus@
+ (done locally and RCS IDs synced)
20031118
- (djm) Fix early exit for root auth success when UsePAM=yes and
You will need working installations of Zlib and OpenSSL.
Zlib 1.1.4 or greater:
-http://www.gzip.org/zlib/
+http://www.gzip.org/zlib/
OpenSSL 0.9.6 or greater:
http://www.openssl.org/
-(OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1
+(OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1
Blowfish) do not work correctly.)
OpenSSH can utilise Pluggable Authentication Modules (PAM) if your system
supports it. PAM is standard on Redhat and Debian Linux, Solaris and
HP-UX 11.
-NB. If you operating system supports /dev/random, you should configure
-OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of
-/dev/random. If you don't you will have to rely on ssh-rand-helper, which
+NB. If you operating system supports /dev/random, you should configure
+OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of
+/dev/random. If you don't you will have to rely on ssh-rand-helper, which
is inferior to a good kernel-based solution.
PAM:
PRNGD:
-If your system lacks Kernel based random collection, the use of Lutz
+If your system lacks Kernel based random collection, the use of Lutz
Jaenicke's PRNGd is recommended.
http://www.aet.tu-cottbus.de/personen/jaenicke/postfix_tls/prngd.html
If you wish to use --with-skey then you will need the above library
installed. No other current S/Key library is currently known to be
-supported.
+supported.
2. Building / Installation
--------------------------
make
make install
-Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override
+Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override
specific paths, for example:
./configure --prefix=/opt --sysconfdir=/etc/ssh
--with-pam enables PAM support. If PAM support is compiled in, it must
also be enabled in sshd_config (refer to the UsePAM directive).
---with-prngd-socket=/some/file allows you to enable EGD or PRNGD
-support and to specify a PRNGd socket. Use this if your Unix lacks
-/dev/random and you don't want to use OpenSSH's builtin entropy
+--with-prngd-socket=/some/file allows you to enable EGD or PRNGD
+support and to specify a PRNGd socket. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
collection support.
---with-prngd-port=portnum allows you to enable EGD or PRNGD support
-and to specify a EGD localhost TCP port. Use this if your Unix lacks
-/dev/random and you don't want to use OpenSSH's builtin entropy
+--with-prngd-port=portnum allows you to enable EGD or PRNGD support
+and to specify a EGD localhost TCP port. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
collection support.
---with-lastlog=FILE will specify the location of the lastlog file.
+--with-lastlog=FILE will specify the location of the lastlog file.
./configure searches a few locations for lastlog, but may not find
it if lastlog is installed in a different place.
--without-lastlog will disable lastlog support entirely.
---with-osfsia, --without-osfsia will enable or disable OSF1's Security
+--with-osfsia, --without-osfsia will enable or disable OSF1's Security
Integration Architecture. The default for OSF1 machines is enable.
---with-skey=PATH will enable S/Key one time password support. You will
+--with-skey=PATH will enable S/Key one time password support. You will
need the S/Key libraries and header files installed for this to work.
--with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny)
not support them directly (see the crypt(3/3c) man page). If enabled, the
resulting binary will support both MD5 and traditional crypt passwords.
---with-utmpx enables utmpx support. utmpx support is automatic for
+--with-utmpx enables utmpx support. utmpx support is automatic for
some platforms.
--without-shadow disables shadow password support.
---with-ipaddr-display forces the use of a numeric IP address in the
+--with-ipaddr-display forces the use of a numeric IP address in the
$DISPLAY environment variable. Some broken systems need this.
--with-default-path=PATH allows you to specify a default $PATH for sessions
3. Configuration
----------------
-The runtime configuration files are installed by in ${prefix}/etc or
+The runtime configuration files are installed by in ${prefix}/etc or
whatever you specified as your --sysconfdir (/usr/local/etc by default).
-The default configuration should be instantly usable, though you should
+The default configuration should be instantly usable, though you should
review it to ensure that it matches your security requirements.
To generate a host key, run "make host-key". Alternately you can do so
-manually using the following commands:
+manually using the following commands:
ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
Replacing /etc/ssh with the correct path to the configuration directory.
-(${prefix}/etc or whatever you specified with --sysconfdir during
+(${prefix}/etc or whatever you specified with --sysconfdir during
configuration)
If you have configured OpenSSH with EGD support, ensure that EGD is
running and has collected some Entropy.
-For more information on configuration, please refer to the manual pages
+For more information on configuration, please refer to the manual pages
for sshd, ssh and ssh-agent.
4. Problems?
------------
-If you experience problems compiling, installing or running OpenSSH.
+If you experience problems compiling, installing or running OpenSSH.
Please refer to the "reporting bugs" section of the webpage at
http://www.openssh.com/
software are publicly available on the Internet and at any major
bookstore, scientific library, and patent office worldwide. More
information can be found e.g. at "http://www.cs.hut.fi/crypto".
-
+
The legal status of this program is some combination of all these
permissions and restrictions. Use only at your own responsibility.
You will be responsible for any legal consequences yourself; I am not
making any claims whether possessing or using this is legal or not in
your country, and I am not taking any responsibility on your behalf.
-
-
- NO WARRANTY
-
+
+
+ NO WARRANTY
+
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
-
+
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
with the following license:
* @version 3.0 (December 2000)
- *
+ *
* Optimised ANSI C code for the Rijndael cipher (now AES)
- *
+ *
* @author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
* @author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
* @author Paulo Barreto <paulo.barreto@terra.com.br>
- *
+ *
* This code is hereby placed in the public domain.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
Nils Nordman
Simon Wilkinson
- Portable OpenSSH additionally includes code from the following copyright
+ Portable OpenSSH additionally includes code from the following copyright
holders, also under the 2-term BSD license:
Ben Lindstrom
a) md5crypt.c, md5crypt.h
* "THE BEER-WARE LICENSE" (Revision 42):
- * <phk@login.dknet.dk> wrote this file. As long as you retain this
- * notice you can do whatever you want with this stuff. If we meet
- * some day, and you think this stuff is worth it, you can buy me a
+ * <phk@login.dknet.dk> wrote this file. As long as you retain this
+ * notice you can do whatever you want with this stuff. If we meet
+ * some day, and you think this stuff is worth it, you can buy me a
* beer in return. Poul-Henning Kamp
b) snprintf replacement
* Copyright Patrick Powell 1995
- * This code is based on code written by Patrick Powell
- * (papowell@astart.com) It may be used for any purpose as long as this
+ * This code is based on code written by Patrick Powell
+ * (papowell@astart.com) It may be used for any purpose as long as this
* notice remains intact on all source code distributions
c) Compatibility code (openbsd-compat)
- Apart from the previously mentioned licenses, various pieces of code
+ Apart from the previously mentioned licenses, various pieces of code
in the openbsd-compat/ subdirectory are licensed as follows:
- Some code is licensed under a 3-term BSD license, to the following
+ Some code is licensed under a 3-term BSD license, to the following
copyright holders:
Todd C. Miller
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
- Some code is licensed under an ISC-style license, to the following
+ Some code is licensed under an ISC-style license, to the following
copyright holders:
Internet Software Consortium.
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- Some code is licensed under a MIT-style license to the following
+ Some code is licensed under a MIT-style license to the following
copyright holders:
Free Software Foundation, Inc.
------
-$OpenBSD: LICENCE,v 1.17 2003/08/22 20:55:06 markus Exp $
+$OpenBSD: LICENCE,v 1.18 2003/11/21 11:57:02 djm Exp $
$(LD) -o $@ scp.o progressmeter.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
- $(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
- $(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
- $(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o
- $(LD) -o $@ ssh-keysign.o readconf.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ ssh-keysign.o readconf.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
- $(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
+ $(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
- $(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o progressmeter.o
$(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
echo
clean: regressclean
- rm -f *.o *.a $(TARGETS) logintest config.cache config.log
- rm -f *.out core
+ rm -f *.o *.a $(TARGETS) logintest config.cache config.log
+ rm -f *.out core
(cd openbsd-compat && $(MAKE) clean)
distclean: regressclean
- rm -f *.o *.a $(TARGETS) logintest config.cache config.log
+ rm -f *.o *.a $(TARGETS) logintest config.cache config.log
rm -f *.out core
rm -f Makefile config.h config.status ssh_prng_cmds *~
rm -rf autom4te.cache
-rmdir $(DESTDIR)$(mandir)
-rmdir $(DESTDIR)$(libexecdir)
-uninstall:
+uninstall:
-rm -f $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
This document is intended for those who wish to read the ssh source
code. This tries to give an overview of the structure of the code.
-
+
Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>
Updated 17 Nov 1995.
Updated 19 Oct 1999 for OpenSSH-1.2
these programs.
Buffer manipulation routines
-
+
- These provide an arbitrary size buffer, where data can be appended.
Data can be consumed from either end. The code is used heavily
throughout ssh. The basic buffer manipulation functions are in
data types is in bufaux.c.
Compression Library
-
+
- Ssh uses the GNU GZIP compression library (ZLIB).
Encryption/Decryption
code is linked into the server. The routines also manipulate
known hosts files using code in hostfile.c. Code in canohost.c
is used to retrieve the canonical host name of the remote host.
- Code in match.c is used to match host names.
+ Code in match.c is used to match host names.
- In the client end, authentication code is in sshconnect.c. It
reads Passwords/passphrases using code in readpass.c. It reads
operations, and finally the server enters the normal session
mode by calling server_loop in serverloop.c. This does the real
work, calling functions in other modules.
-
+
- The code for the server is in sshd.c. It contains a lot of
stuff, including:
- - server main program
+ - server main program
- waiting for connections
- processing new connection
- authentication
- There are several other files in the distribution that contain
various auxiliary routines:
- ssh.h the main header file for ssh (various definitions)
- getput.h byte-order independent storage of integers
- includes.h includes most system headers. Lots of #ifdefs.
+ ssh.h the main header file for ssh (various definitions)
+ getput.h byte-order independent storage of integers
+ includes.h includes most system headers. Lots of #ifdefs.
tildexpand.c expand tilde in file names
uidswap.c uid-swapping
xmalloc.c "safe" malloc routines
-- A Japanese translation of this document and of the OpenSSH FAQ is
+- A Japanese translation of this document and of the OpenSSH FAQ is
- available at http://www.unixuser.org/~haruyama/security/openssh/index.html
- Thanks to HARUYAMA Seigo <haruyama@unixuser.org>
and Dug Song. It has a homepage at http://www.openssh.com/
This port consists of the re-introduction of autoconf support, PAM
-support (for Linux and Solaris), EGD[1]/PRNGD[2] support and replacements
-for OpenBSD library functions that are (regrettably) absent from other
-unices. This port has been best tested on Linux, Solaris, HP-UX, NetBSD,
-Irix and AIX. Support for SCO, NeXT and other Unices is underway.
+support (for Linux and Solaris), EGD[1]/PRNGD[2] support and replacements
+for OpenBSD library functions that are (regrettably) absent from other
+unices. This port has been best tested on Linux, Solaris, HP-UX, NetBSD,
+Irix and AIX. Support for SCO, NeXT and other Unices is underway.
This version actively tracks changes in the OpenBSD CVS repository.
The PAM support is now more functional than the popular packages of
openssh-unix-dev@mindrot.org. The list is open to posting by
unsubscribed users.
-If you are a citizen of an USA-embargoed country to which export of
-cryptographic products is restricted, then please refrain from sending
+If you are a citizen of an USA-embargoed country to which export of
+cryptographic products is restricted, then please refrain from sending
crypto-related code or patches to the list. We cannot accept them.
Other code contribution are accepted, but please follow the OpenBSD
style guidelines[6].
Please refer to the INSTALL document for information on how to install
-OpenSSH on your system. There are a number of differences between this
+OpenSSH on your system. There are a number of differences between this
port of OpenSSH and F-Secure SSH 1.x, please refer to the OpenSSH FAQ[7]
for details and general tips.
Damien Miller <djm@mindrot.org>
-Miscellania -
+Miscellania -
This version of OpenSSH is based upon code retrieved from the OpenBSD
CVS repository which in turn was based on the last free sample
Privilege separation, or privsep, is method in OpenSSH by which
operations that require root privilege are performed by a separate
privileged monitor process. Its purpose is to prevent privilege
-escalation by containing corruption to an unprivileged process.
+escalation by containing corruption to an unprivileged process.
More information is available at:
http://www.citi.umich.edu/u/provos/ssh/privsep.html
Privilege separation is now enabled by default; see the
UsePrivilegeSeparation option in sshd_config(5).
-On systems which lack mmap or anonymous (MAP_ANON) memory mapping,
-compression must be disabled in order for privilege separation to
+On systems which lack mmap or anonymous (MAP_ANON) memory mapping,
+compression must be disabled in order for privilege separation to
function.
When privsep is enabled, during the pre-authentication phase sshd will
Privsep requires operating system support for file descriptor passing.
Compression will be disabled on systems without a working mmap MAP_ANON.
-PAM-enabled OpenSSH is known to function with privsep on Linux.
+PAM-enabled OpenSSH is known to function with privsep on Linux.
It does not function on HP-UX with a trusted system
-configuration.
+configuration.
On Compaq Tru64 Unix, only the pre-authentication part of privsep is
supported. Post-authentication privsep is disabled automatically (so
How to use smartcards with OpenSSH?
OpenSSH contains experimental support for authentication using
-Cyberflex smartcards and TODOS card readers, in addition to the cards
+Cyberflex smartcards and TODOS card readers, in addition to the cards
with PKCS#15 structure supported by OpenSC. To enable this you
need to:
sectok> login -d
sectok> jload /usr/libdata/ssh/Ssh.bin
sectok> setpass
- Enter new AUT0 passphrase:
- Re-enter passphrase:
+ Enter new AUT0 passphrase:
+ Re-enter passphrase:
sectok> quit
Do not forget the passphrase. There is no way to
$ sectok
sectok> login -d
- sectok> acl 0012 world: w
- world: w
- AUT0: w inval
+ sectok> acl 0012 world: w
+ world: w
+ AUT0: w inval
sectok> quit
If you do this, anyone who has access to your card
-markus,
Tue Jul 17 23:54:51 CEST 2001
-$OpenBSD: README.smartcard,v 1.8 2002/03/26 18:56:23 rees Exp $
+$OpenBSD: README.smartcard,v 1.9 2003/11/21 11:57:02 djm Exp $
authentication agent forwarding, and executing the shell or a command.
When a shell or command is executed, the connection enters interactive
-session mode. In this mode, data is passed in both directions,
+session mode. In this mode, data is passed in both directions,
new forwarded connections may be opened, etc. The interactive session
normally terminates when the server sends the exit status of the
program to the client.
are not compatible increment the major version (which will hopefully
never happen). The version described in this document is 1.3.
-The client will
+The client will
.ti 0
Key Exchange and Server Host Authentication
- Install FAQ?
- General FAQ on S/Key, TIS, RSA, RSA2, DSA, etc and suggestions on when it
- would be best to use them.
+ would be best to use them.
- Create a Documentation/ directory?
- Grep for 'XXX' comments and fix
- Link order is incorrect for some systems using Kerberos 4 and AFS. Result
- is multiple inclusion of DES symbols. Holger Trapp
+ is multiple inclusion of DES symbols. Holger Trapp
<holger.trapp@hrz.tu-chemnitz.de> reports that changing the configure
generated link order from:
-lresolv -lkrb -lz -lnsl -lutil -lkafs -lkrb -ldes -lcrypto
fixing the problem.
- Write a test program that calls stat() to search for EGD/PRNGd socket
- rather than use the (non-portable) "test -S".
+ rather than use the (non-portable) "test -S".
- More platforms for for setproctitle() emulation (testing needed)
to allow people to (right/wrongfully) link against Bind directly.
- Consider splitting configure.ac into seperate files which do logically
- similar tests. E.g move all the type detection stuff into one file,
+ similar tests. E.g move all the type detection stuff into one file,
entropy related stuff into another.
Packaging:
+ /dev/zero solution (Solaris)
+ No/broken MAP_ANON (Irix)
+ broken /dev/zero parse (Linux)
-- PAM
+- PAM
+ See above PAM notes
- AIX
+ usrinfo() does not set TTY, but only required for legacy systems. Works
The random number code will also read and save a seed file to
~/.ssh/prng_seed. This contents of this file are added to the random
-number generator at startup. The goal here is to maintain as much
+number generator at startup. The goal here is to maintain as much
randomness between sessions as possible.
The default entropy collection code has two main problems:
1. It is slow.
-Executing each program in the list can take a large amount of time,
-especially on slower machines. Additionally some program can take a
-disproportionate time to execute.
+Executing each program in the list can take a large amount of time,
+especially on slower machines. Additionally some program can take a
+disproportionate time to execute.
Tuning the default entropy collection code is difficult at this point.
It requires doing 'times ./ssh-rand-helper' and modifying the
if ((device->query(authctxt->kbdintctxt, &name, &info,
&numprompts, &prompts, &echo_on)) != 0)
break;
- if (numprompts == 0 &&
+ if (numprompts == 0 &&
device->respond(authctxt->kbdintctxt, 0, resp) == 0)
authenticated = 1;
*/
#include "includes.h"
-RCSID("$OpenBSD: auth-krb5.c,v 1.14 2003/11/04 08:54:09 djm Exp $");
+RCSID("$OpenBSD: auth-krb5.c,v 1.15 2003/11/21 11:57:02 djm Exp $");
#include "ssh.h"
#include "ssh1.h"
if (problem)
goto out;
- if (!krb5_kuserok(authctxt->krb5_ctx, authctxt->krb5_user,
+ if (!krb5_kuserok(authctxt->krb5_ctx, authctxt->krb5_user,
authctxt->pw->pw_name)) {
problem = -1;
goto out;
- }
+ }
snprintf(ccname,sizeof(ccname),"FILE:/tmp/krb5cc_%d_XXXXXX",geteuid());
#ifdef USE_POSIX_THREADS
#include <pthread.h>
/*
- * Avoid namespace clash when *not* using pthreads for systems *with*
- * pthreads, which unconditionally define pthread_t via sys/types.h
+ * Avoid namespace clash when *not* using pthreads for systems *with*
+ * pthreads, which unconditionally define pthread_t via sys/types.h
* (e.g. Linux)
*/
-typedef pthread_t sp_pthread_t;
+typedef pthread_t sp_pthread_t;
#else
/*
* Simulate threads with processes.
pam_getenvlist(pam_handle_t *pamh)
{
/*
- * XXX - If necessary, we can still support envrionment passing
+ * XXX - If necessary, we can still support envrionment passing
* for platforms without pam_getenvlist by searching for known
* env vars (e.g. KRB5CCNAME) from the PAM environment.
*/
for (i = 0; i < n; ++i) {
switch (PAM_MSG_MEMBER(msg, i, msg_style)) {
case PAM_PROMPT_ECHO_OFF:
- buffer_put_cstring(&buffer,
+ buffer_put_cstring(&buffer,
PAM_MSG_MEMBER(msg, i, msg));
- if (ssh_msg_send(ctxt->pam_csock,
+ if (ssh_msg_send(ctxt->pam_csock,
PAM_MSG_MEMBER(msg, i, msg_style), &buffer) == -1)
goto fail;
- if (ssh_msg_recv(ctxt->pam_csock, &buffer) == -1)
+ if (ssh_msg_recv(ctxt->pam_csock, &buffer) == -1)
goto fail;
if (buffer_get_char(&buffer) != PAM_AUTHTOK)
goto fail;
reply[i].resp = buffer_get_string(&buffer, NULL);
break;
case PAM_PROMPT_ECHO_ON:
- buffer_put_cstring(&buffer,
+ buffer_put_cstring(&buffer,
PAM_MSG_MEMBER(msg, i, msg));
- if (ssh_msg_send(ctxt->pam_csock,
+ if (ssh_msg_send(ctxt->pam_csock,
PAM_MSG_MEMBER(msg, i, msg_style), &buffer) == -1)
goto fail;
if (ssh_msg_recv(ctxt->pam_csock, &buffer) == -1)
reply[i].resp = buffer_get_string(&buffer, NULL);
break;
case PAM_ERROR_MSG:
- buffer_put_cstring(&buffer,
+ buffer_put_cstring(&buffer,
PAM_MSG_MEMBER(msg, i, msg));
- if (ssh_msg_send(ctxt->pam_csock,
+ if (ssh_msg_send(ctxt->pam_csock,
PAM_MSG_MEMBER(msg, i, msg_style), &buffer) == -1)
goto fail;
break;
case PAM_TEXT_INFO:
- buffer_put_cstring(&buffer,
+ buffer_put_cstring(&buffer,
PAM_MSG_MEMBER(msg, i, msg));
- if (ssh_msg_send(ctxt->pam_csock,
+ if (ssh_msg_send(ctxt->pam_csock,
PAM_MSG_MEMBER(msg, i, msg_style), &buffer) == -1)
goto fail;
break;
return (-1);
}
#ifdef PAM_TTY_KLUDGE
- /*
- * Some silly PAM modules (e.g. pam_time) require a TTY to operate.
- * sshd doesn't set the tty until too late in the auth process and
+ /*
+ * Some silly PAM modules (e.g. pam_time) require a TTY to operate.
+ * sshd doesn't set the tty until too late in the auth process and
* may not even set one (for tty-less connections)
- */
+ */
debug("PAM: setting PAM_TTY to \"ssh\"");
sshpam_err = pam_set_item(sshpam_handle, PAM_TTY, "ssh");
if (sshpam_err != PAM_SUCCESS) {
switch (PAM_MSG_MEMBER(msg, i, msg_style)) {
case PAM_PROMPT_ECHO_OFF:
reply[i].resp =
- read_passphrase(PAM_MSG_MEMBER(msg, i, msg),
+ read_passphrase(PAM_MSG_MEMBER(msg, i, msg),
RP_ALLOW_STDIN);
reply[i].resp_retcode = PAM_SUCCESS;
break;
void
do_pam_session(void)
{
- sshpam_err = pam_set_item(sshpam_handle, PAM_CONV,
+ sshpam_err = pam_set_item(sshpam_handle, PAM_CONV,
(const void *)&tty_conv);
if (sshpam_err != PAM_SUCCESS)
fatal("PAM: failed to set PAM_CONV: %s",
sshpam_session_open = 1;
}
-/*
+/*
* Set a PAM environment string. We need to do this so that the session
* modules can handle things like Kerberos/GSI credentials that appear
* during the ssh authentication process.
*/
int
-do_pam_putenv(char *name, char *value)
+do_pam_putenv(char *name, char *value)
{
int ret = 1;
#ifdef HAVE_PAM_PUTENV
if (authenticate(pw->pw_name, password, &reenter,
&authmsg) == 0 && ok) {
char *msg;
- char *host =
+ char *host =
(char *)get_canonical_hostname(options.use_dns);
authsuccess = 1;
debug3("AIX/authenticate succeeded for user %s: %.100s",
pw->pw_name, authmsg);
- /* No pty yet, so just label the line as "ssh" */
+ /* No pty yet, so just label the line as "ssh" */
aix_setauthdb(authctxt->user);
- if (loginsuccess(authctxt->user, host, "ssh",
+ if (loginsuccess(authctxt->user, host, "ssh",
&msg) == 0) {
if (msg != NULL) {
debug("%s: msg %s", __func__, msg);
- buffer_append(&loginmsg, msg,
+ buffer_append(&loginmsg, msg,
strlen(msg));
xfree(msg);
}
host = get_canonical_hostname(options.use_dns);
- if (sia_ses_init(&ent, saved_argc, saved_argv, host, pw->pw_name,
+ if (sia_ses_init(&ent, saved_argc, saved_argv, host, pw->pw_name,
tty, 0, NULL) != SIASUCCESS)
fatal("sia_ses_init failed");
*/
#include "includes.h"
-RCSID("$OpenBSD: auth.c,v 1.50 2003/09/23 20:17:11 markus Exp $");
+RCSID("$OpenBSD: auth.c,v 1.51 2003/11/21 11:57:02 djm Exp $");
#ifdef HAVE_LOGIN_H
#include <login.h>
#endif /* HAS_SHADOW_EXPIRE */
#endif /* defined(HAVE_SHADOW_H) && !defined(DISABLE_SHADOW) */
- /* grab passwd field for locked account check */
+ /* grab passwd field for locked account check */
#if defined(HAVE_SHADOW_H) && !defined(DISABLE_SHADOW)
if (spw != NULL)
passwd = spw->sp_pwdp;
passwd = pw->pw_passwd;
#endif
- /* check for locked account */
+ /* check for locked account */
if (!options.use_pam && passwd && *passwd) {
int locked = 0;
if ((pw->pw_uid != 0) && (geteuid() == 0)) {
char *msg;
- if (loginrestrictions(pw->pw_name, S_RLOGIN, NULL, &msg) != 0) {
+ if (loginrestrictions(pw->pw_name, S_RLOGIN, NULL, &msg) != 0) {
int loginrestrict_errno = errno;
if (msg && *msg) {
pw->pw_name, msg);
}
/* Don't fail if /etc/nologin set */
- if (!(loginrestrict_errno == EPERM &&
+ if (!(loginrestrict_errno == EPERM &&
stat(_PATH_NOLOGIN, &st) == 0))
return 0;
}
#endif
#ifdef USE_PAM
- if (options.use_pam && authenticated &&
+ if (options.use_pam && authenticated &&
!PRIVSEP(do_pam_account()))
authenticated = 0;
#endif
-/* $OpenBSD: auth2-gss.c,v 1.6 2003/11/17 11:06:07 markus Exp $ */
+/* $OpenBSD: auth2-gss.c,v 1.7 2003/11/21 11:57:03 djm Exp $ */
/*
* Copyright (c) 2001-2003 Simon Wilkinson. All rights reserved.
present = 0;
doid = packet_get_string(&len);
- if (len > 2 &&
+ if (len > 2 &&
doid[0] == SSH_GSS_OIDTYPE &&
doid[1] == len - 2) {
- oid.elements = doid + 2;
- oid.length = len - 2;
+ oid.elements = doid + 2;
+ oid.length = len - 2;
gss_test_oid_set_member(&ms, &oid, supported,
&present);
} else {
*/
#include "includes.h"
-RCSID("$OpenBSD: authfd.c,v 1.62 2003/09/18 13:02:21 miod Exp $");
+RCSID("$OpenBSD: authfd.c,v 1.63 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
}
int
-ssh_update_card(AuthenticationConnection *auth, int add,
+ssh_update_card(AuthenticationConnection *auth, int add,
const char *reader_id, const char *pin, u_int life, u_int confirm)
{
Buffer msg;
-/* $OpenBSD: authfd.h,v 1.33 2003/06/11 11:18:38 djm Exp $ */
+/* $OpenBSD: authfd.h,v 1.34 2003/11/21 11:57:03 djm Exp $ */
/*
* Author: Tatu Ylonen <ylo@cs.hut.fi>
int ssh_remove_identity(AuthenticationConnection *, Key *);
int ssh_remove_all_identities(AuthenticationConnection *, int);
int ssh_lock_agent(AuthenticationConnection *, int, const char *);
-int ssh_update_card(AuthenticationConnection *, int, const char *,
+int ssh_update_card(AuthenticationConnection *, int, const char *,
const char *, u_int, u_int);
int
*/
#include "includes.h"
-RCSID("$OpenBSD: buffer.c,v 1.20 2003/09/19 09:03:00 markus Exp $");
+RCSID("$OpenBSD: buffer.c,v 1.21 2003/11/21 11:57:03 djm Exp $");
#include "xmalloc.h"
#include "buffer.h"
*/
#include "includes.h"
-RCSID("$OpenBSD: channels.c,v 1.197 2003/09/23 20:41:11 markus Exp $");
+RCSID("$OpenBSD: channels.c,v 1.198 2003/11/21 11:57:03 djm Exp $");
#include "ssh.h"
#include "ssh1.h"
have = buffer_len(&c->input);
if (!(c->flags & SSH_SOCKS5_AUTHDONE)) {
/* format: ver | nmethods | methods */
- if (have < 2)
+ if (have < 2)
return 0;
nmethods = p[1];
if (have < nmethods + 2)
data = buffer_ptr(&c->output);
dlen = buffer_len(&c->output);
#ifdef _AIX
- /* XXX: Later AIX versions can't push as much data to tty */
+ /* XXX: Later AIX versions can't push as much data to tty */
if (compat20 && c->wfd_isatty && dlen > 8*1024)
dlen = 8*1024;
#endif
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "includes.h"
-RCSID("$OpenBSD: cipher-ctr.c,v 1.2 2003/06/17 18:14:23 markus Exp $");
+RCSID("$OpenBSD: cipher-ctr.c,v 1.3 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
EVP_CIPHER_CTX_set_app_data(ctx, c);
}
if (key != NULL)
- AES_set_encrypt_key(key, ctx->key_len * 8, &c->aes_ctx);
+ AES_set_encrypt_key(key, ctx->key_len * 8, &c->aes_ctx);
if (iv != NULL)
memcpy(c->aes_counter, iv, AES_BLOCK_SIZE);
return (1);
fi
;;
*)
- os=netbsd
+ os=netbsd
;;
esac
# The OS release
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit 0 ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
echo m88k-motorola-sysv3
exit 0 ;;
AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit 0 ;;
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
'') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
+ esac ;;
+ esac
fi
if [ "${HP_ARCH}" = "" ]; then
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
EOF
(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`$dummy`
if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
exit 0 ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit 0 ;;
+ exit 0 ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit 0 ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit 0 ;;
+ exit 0 ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit 0 ;;
+ exit 0 ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit 0 ;;
+ exit 0 ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
exit 0 ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
EV6) UNAME_MACHINE=alphaev6 ;;
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
+ esac
objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
s/.*supported targets: *//
s/ .*//
p'`
- case "$ld_supported_targets" in
+ case "$ld_supported_targets" in
elf32-i386)
TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
;;
echo i386-sequent-sysv4
exit 0 ;;
i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
+ # Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
exit 0 ;;
pc:*:*:*)
# Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
- exit 0 ;;
+ exit 0 ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
exit 0 ;;
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
fi
exit 0 ;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes@openmarket.com>.
# How about differentiating between stratus architectures? -djm
exit 0 ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
+ echo mips-nec-sysv${UNAME_RELEASE}
else
- echo mips-unknown-sysv${UNAME_RELEASE}
+ echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit 0 ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
exit 0 ;;
#include <sys/param.h>
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
- "4"
+ "4"
#else
""
#endif
- ); exit (0);
+ ); exit (0);
#endif
#endif
os=-chorusos
basic_machine=$1
;;
- -chorusrdb)
- os=-chorusrdb
+ -chorusrdb)
+ os=-chorusrdb
basic_machine=$1
- ;;
+ ;;
-hiux*)
os=-hiuxwe2
;;
pbb)
basic_machine=m68k-tti
;;
- pc532 | pc532-*)
+ pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
- ;;
+ ;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
- ;;
+ ;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
- ;;
+ ;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
- ;;
+ ;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
- sv1)
+ sv1)
basic_machine=sv1-cray
os=-unicos
;;
- sx*-nec)
+ sx*-nec)
basic_machine=sx6-nec
os=-sysv
;;
os=-vms
;;
vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
+ basic_machine=f301-fujitsu
+ ;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
basic_machine=i386-pc
os=-windows32-msvcrt
;;
- xps | xps100)
+ xps | xps100)
basic_machine=xps100-honeywell
;;
ymp)
sparc | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
- cydra)
+ cydra)
basic_machine=cydra-cydrome
;;
orion)
if [ x"$os" != x"" ]
then
case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
+ # First match some system type aliases
+ # that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
os=-rtmk-nova
;;
-ns2 )
- os=-nextstep2
+ os=-nextstep2
;;
-nsk*)
os=-nsk
-xenix)
os=-xenix
;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
;;
-none)
;;
pdp10-*)
os=-tops20
;;
- pdp11-*)
+ pdp11-*)
os=-none
;;
*-dec | vax-*)
*-next)
os=-nextstep3
;;
- *-gould)
+ *-gould)
os=-sysv
;;
- *-highlevel)
+ *-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
- *-sgi)
+ *-sgi)
os=-irix
;;
- *-siemens)
+ *-siemens)
os=-sysv4
;;
*-masscomp)
AC_SUBST(LD)
AC_C_INLINE
-if test "$GCC" = "yes" || test "$GCC" = "egcs"; then
+if test "$GCC" = "yes" || test "$GCC" = "egcs"; then
CFLAGS="$CFLAGS -Wall -Wpointer-arith -Wno-uninitialized"
fi
*-*-aix*)
CPPFLAGS="$CPPFLAGS -I/usr/local/include"
LDFLAGS="$LDFLAGS -L/usr/local/lib"
- AC_MSG_CHECKING([how to specify blibpath for linker ($LD)])
+ AC_MSG_CHECKING([how to specify blibpath for linker ($LD)])
if (test -z "$blibpath"); then
blibpath="/usr/lib:/lib:/usr/local/lib"
fi
;;
*-*-solaris*)
CPPFLAGS="$CPPFLAGS -I/usr/local/include"
- LDFLAGS="$LDFLAGS -L/usr/local/lib -R/usr/local/lib"
+ LDFLAGS="$LDFLAGS -L/usr/local/lib -R/usr/local/lib"
need_dash_r=1
AC_DEFINE(PAM_SUN_CODEBASE)
AC_DEFINE(LOGIN_NEEDS_UTMPX)
AC_CHECK_LIB(z, deflate, ,AC_MSG_ERROR([*** zlib missing - please install first or check config.log ***]))
dnl UnixWare 2.x
-AC_CHECK_FUNC(strcasecmp,
+AC_CHECK_FUNC(strcasecmp,
[], [ AC_CHECK_LIB(resolv, strcasecmp, LIBS="$LIBS -lresolv") ]
)
-AC_CHECK_FUNC(utimes,
+AC_CHECK_FUNC(utimes,
[], [ AC_CHECK_LIB(c89, utimes, [AC_DEFINE(HAVE_UTIMES)
LIBS="$LIBS -lc89"]) ]
)
#ifdef GLOB_ALTDIRFUNC
FOUNDIT
#endif
- ],
+ ],
[
AC_DEFINE(GLOB_HAS_ALTDIRFUNC)
AC_MSG_RESULT(yes)
# Check for g.gl_matchc glob() extension
AC_MSG_CHECKING(for gl_matchc field in glob_t)
AC_EGREP_CPP(FOUNDIT,
- [
- #include <glob.h>
+ [
+ #include <glob.h>
int main(void){glob_t g; g.gl_matchc = 1;}
- ],
- [
- AC_DEFINE(GLOB_HAS_GL_MATCHC)
- AC_MSG_RESULT(yes)
- ],
- [
- AC_MSG_RESULT(no)
- ]
+ ],
+ [
+ AC_DEFINE(GLOB_HAS_GL_MATCHC)
+ AC_MSG_RESULT(yes)
+ ],
+ [
+ AC_MSG_RESULT(no)
+ ]
)
AC_MSG_CHECKING([whether struct dirent allocates space for d_name])
#include <dirent.h>
int main(void){struct dirent d;exit(sizeof(d.d_name)<=sizeof(char));}
],
- [AC_MSG_RESULT(yes)],
+ [AC_MSG_RESULT(yes)],
[
AC_MSG_RESULT(no)
AC_DEFINE(BROKEN_ONE_BYTE_DIRENT_D_NAME)
)
# Check whether user wants S/Key support
-SKEY_MSG="no"
+SKEY_MSG="no"
AC_ARG_WITH(skey,
[ --with-skey[[=PATH]] Enable S/Key support
- (optionally in PATH)],
+ (optionally in PATH)],
[
if test "x$withval" != "xno" ; then
AC_DEFINE(SKEY)
LIBS="-lskey $LIBS"
- SKEY_MSG="yes"
+ SKEY_MSG="yes"
AC_MSG_CHECKING([for s/key support])
AC_TRY_RUN(
TCPW_MSG="no"
AC_ARG_WITH(tcp-wrappers,
[ --with-tcp-wrappers[[=PATH]] Enable tcpwrappers support
- (optionally in PATH)],
+ (optionally in PATH)],
[
if test "x$withval" != "xno" ; then
saved_LIBS="$LIBS"
dnl tcsendbreak might be a macro
AC_CHECK_DECL(tcsendbreak,
[AC_DEFINE(HAVE_TCSENDBREAK)],
- [AC_CHECK_FUNCS(tcsendbreak)],
+ [AC_CHECK_FUNCS(tcsendbreak)],
[#include <termios.h>]
)
AC_CHECK_FUNCS(endutxent getutxent getutxid getutxline pututxline )
AC_CHECK_FUNCS(setutxent utmpxname)
-AC_CHECK_FUNC(daemon,
+AC_CHECK_FUNC(daemon,
[AC_DEFINE(HAVE_DAEMON)],
[AC_CHECK_LIB(bsd, daemon, [LIBS="$LIBS -lbsd"; AC_DEFINE(HAVE_DAEMON)])]
)
-AC_CHECK_FUNC(getpagesize,
+AC_CHECK_FUNC(getpagesize,
[AC_DEFINE(HAVE_GETPAGESIZE)],
[AC_CHECK_LIB(ucb, getpagesize, [LIBS="$LIBS -lucb"; AC_DEFINE(HAVE_GETPAGESIZE)])]
)
#include <stdio.h>
int main(void){char b[5];snprintf(b,5,"123456789");exit(b[4]!='\0');}
],
- [AC_MSG_RESULT(yes)],
+ [AC_MSG_RESULT(yes)],
[
AC_MSG_RESULT(no)
AC_DEFINE(BROKEN_SNPRINTF)
[
AC_MSG_RESULT(no)
],
- [
+ [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_STRICT_MKSTEMP)
],
[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_STRICT_MKSTEMP)
- ]
+ ]
)
fi
exit(1);
} else if (pid > 0) { /* parent */
waitpid(pid, &status, 0);
- if (WIFEXITED(status))
+ if (WIFEXITED(status))
exit(WEXITSTATUS(status));
else
exit(2);
[
#include <stdlib.h>
#include <security/pam_appl.h>
- ],
- [(void)pam_strerror((pam_handle_t *)NULL, -1);],
+ ],
+ [(void)pam_strerror((pam_handle_t *)NULL, -1);],
[AC_MSG_RESULT(no)],
[
AC_DEFINE(HAVE_OLD_PAM)
#include <openssl/opensslv.h>
#define DATA "conftest.sslincver"
int main(void) {
- FILE *fd;
- int rc;
+ FILE *fd;
+ int rc;
- fd = fopen(DATA,"w");
- if(fd == NULL)
- exit(1);
+ fd = fopen(DATA,"w");
+ if(fd == NULL)
+ exit(1);
if ((rc = fprintf(fd ,"%x (%s)\n", OPENSSL_VERSION_NUMBER, OPENSSL_VERSION_TEXT)) <0)
exit(1);
#include <openssl/crypto.h>
#define DATA "conftest.ssllibver"
int main(void) {
- FILE *fd;
- int rc;
+ FILE *fd;
+ int rc;
- fd = fopen(DATA,"w");
- if(fd == NULL)
- exit(1);
+ fd = fopen(DATA,"w");
+ if(fd == NULL)
+ exit(1);
if ((rc = fprintf(fd ,"%x (%s)\n", SSLeay(), SSLeay_version(SSLEAY_VERSION))) <0)
exit(1);
]
)
-# Some Linux systems (Slackware) need crypt() from libcrypt, *not* the
+# Some Linux systems (Slackware) need crypt() from libcrypt, *not* the
# version in OpenSSL. Skip this for PAM
if test "x$check_for_libcrypt_later" = "x1"; then
AC_CHECK_LIB(crypt, crypt, LIBS="$LIBS -lcrypt")
[ --with-rand-helper Use subprocess to gather strong randomness ],
[
if test "x$withval" = "xno" ; then
- # Force use of OpenSSL's internal RNG, even if
+ # Force use of OpenSSL's internal RNG, even if
# the previous test showed it to be unseeded.
if test -z "$OPENSSL_SEEDS_ITSELF" ; then
AC_MSG_WARN([*** Forcing use of OpenSSL's non-self-seeding PRNG])
test -d /usr/sbin && PATH=$PATH:/usr/sbin
PATH=$PATH:/etc:$OPATH
-# These programs are used by the command hashing source to gather entropy
+# These programs are used by the command hashing source to gather entropy
OSSH_PATH_ENTROPY_PROG(PROG_LS, ls)
OSSH_PATH_ENTROPY_PROG(PROG_NETSTAT, netstat)
OSSH_PATH_ENTROPY_PROG(PROG_ARP, arp)
# More checks for data types
AC_CACHE_CHECK([for u_int type], ac_cv_have_u_int, [
AC_TRY_COMPILE(
- [ #include <sys/types.h> ],
- [ u_int a; a = 1;],
+ [ #include <sys/types.h> ],
+ [ u_int a; a = 1;],
[ ac_cv_have_u_int="yes" ],
[ ac_cv_have_u_int="no" ]
)
AC_CACHE_CHECK([for intXX_t types], ac_cv_have_intxx_t, [
AC_TRY_COMPILE(
- [ #include <sys/types.h> ],
- [ int8_t a; int16_t b; int32_t c; a = b = c = 1;],
+ [ #include <sys/types.h> ],
+ [ int8_t a; int16_t b; int32_t c; a = b = c = 1;],
[ ac_cv_have_intxx_t="yes" ],
[ ac_cv_have_intxx_t="no" ]
)
fi
if (test -z "$have_intxx_t" && \
- test "x$ac_cv_header_stdint_h" = "xyes")
+ test "x$ac_cv_header_stdint_h" = "xyes")
then
AC_MSG_CHECKING([for intXX_t types in stdint.h])
AC_TRY_COMPILE(
- [ #include <stdint.h> ],
- [ int8_t a; int16_t b; int32_t c; a = b = c = 1;],
+ [ #include <stdint.h> ],
+ [ int8_t a; int16_t b; int32_t c; a = b = c = 1;],
[
AC_DEFINE(HAVE_INTXX_T)
AC_MSG_RESULT(yes)
#ifdef HAVE_SYS_BITYPES_H
# include <sys/bitypes.h>
#endif
- ],
- [ int64_t a; a = 1;],
+ ],
+ [ int64_t a; a = 1;],
[ ac_cv_have_int64_t="yes" ],
[ ac_cv_have_int64_t="no" ]
)
AC_CACHE_CHECK([for u_intXX_t types], ac_cv_have_u_intxx_t, [
AC_TRY_COMPILE(
- [ #include <sys/types.h> ],
- [ u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;],
+ [ #include <sys/types.h> ],
+ [ u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;],
[ ac_cv_have_u_intxx_t="yes" ],
[ ac_cv_have_u_intxx_t="no" ]
)
if test -z "$have_u_intxx_t" ; then
AC_MSG_CHECKING([for u_intXX_t types in sys/socket.h])
AC_TRY_COMPILE(
- [ #include <sys/socket.h> ],
- [ u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;],
+ [ #include <sys/socket.h> ],
+ [ u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;],
[
AC_DEFINE(HAVE_U_INTXX_T)
AC_MSG_RESULT(yes)
AC_CACHE_CHECK([for u_int64_t types], ac_cv_have_u_int64_t, [
AC_TRY_COMPILE(
- [ #include <sys/types.h> ],
- [ u_int64_t a; a = 1;],
+ [ #include <sys/types.h> ],
+ [ u_int64_t a; a = 1;],
[ ac_cv_have_u_int64_t="yes" ],
[ ac_cv_have_u_int64_t="no" ]
)
if test -z "$have_u_int64_t" ; then
AC_MSG_CHECKING([for u_int64_t type in sys/bitypes.h])
AC_TRY_COMPILE(
- [ #include <sys/bitypes.h> ],
+ [ #include <sys/bitypes.h> ],
[ u_int64_t a; a = 1],
[
AC_DEFINE(HAVE_U_INT64_T)
AC_TRY_COMPILE(
[
#include <sys/types.h>
- ],
- [ uint8_t a; uint16_t b; uint32_t c; a = b = c = 1; ],
+ ],
+ [ uint8_t a; uint16_t b; uint32_t c; a = b = c = 1; ],
[ ac_cv_have_uintxx_t="yes" ],
[ ac_cv_have_uintxx_t="no" ]
)
if test -z "$have_uintxx_t" ; then
AC_MSG_CHECKING([for uintXX_t types in stdint.h])
AC_TRY_COMPILE(
- [ #include <stdint.h> ],
- [ uint8_t a; uint16_t b; uint32_t c; a = b = c = 1;],
+ [ #include <stdint.h> ],
+ [ uint8_t a; uint16_t b; uint32_t c; a = b = c = 1;],
[
AC_DEFINE(HAVE_UINTXX_T)
AC_MSG_RESULT(yes)
fi
if (test -z "$have_u_intxx_t" || test -z "$have_intxx_t" && \
- test "x$ac_cv_header_sys_bitypes_h" = "xyes")
+ test "x$ac_cv_header_sys_bitypes_h" = "xyes")
then
AC_MSG_CHECKING([for intXX_t and u_intXX_t types in sys/bitypes.h])
AC_TRY_COMPILE(
[
#include <sys/bitypes.h>
- ],
+ ],
[
int8_t a; int16_t b; int32_t c;
u_int8_t e; u_int16_t f; u_int32_t g;
a = b = c = e = f = g = 1;
- ],
+ ],
[
AC_DEFINE(HAVE_U_INTXX_T)
AC_DEFINE(HAVE_INTXX_T)
AC_MSG_RESULT(yes)
],
[AC_MSG_RESULT(no)]
- )
+ )
fi
AC_CACHE_CHECK([for struct timeval], ac_cv_have_struct_timeval, [
AC_TRY_COMPILE(
- [ #include <sys/time.h> ],
- [ struct timeval tv; tv.tv_sec = 1;],
+ [ #include <sys/time.h> ],
+ [ struct timeval tv; tv.tv_sec = 1;],
[ ac_cv_have_struct_timeval="yes" ],
[ ac_cv_have_struct_timeval="no" ]
)
strcpy(expected_out, "9223372036854775807");
snprintf(buf, mazsize, "%lld", num);
if(strcmp(buf, expected_out) != 0)
- exit(1);
+ exit(1);
exit(0);
}
#else
fi
AC_CACHE_CHECK([if libc defines __progname], ac_cv_libc_defines___progname, [
- AC_TRY_LINK([],
- [ extern char *__progname; printf("%s", __progname); ],
+ AC_TRY_LINK([],
+ [ extern char *__progname; printf("%s", __progname); ],
[ ac_cv_libc_defines___progname="yes" ],
[ ac_cv_libc_defines___progname="no" ]
)
AC_CACHE_CHECK([whether $CC implements __FUNCTION__], ac_cv_cc_implements___FUNCTION__, [
AC_TRY_LINK([
#include <stdio.h>
-],
- [ printf("%s", __FUNCTION__); ],
+],
+ [ printf("%s", __FUNCTION__); ],
[ ac_cv_cc_implements___FUNCTION__="yes" ],
[ ac_cv_cc_implements___FUNCTION__="no" ]
)
AC_CACHE_CHECK([whether $CC implements __func__], ac_cv_cc_implements___func__, [
AC_TRY_LINK([
#include <stdio.h>
-],
- [ printf("%s", __func__); ],
+],
+ [ printf("%s", __func__); ],
[ ac_cv_cc_implements___func__="yes" ],
[ ac_cv_cc_implements___func__="no" ]
)
fi
AC_CACHE_CHECK([if libc defines sys_errlist], ac_cv_libc_defines_sys_errlist, [
- AC_TRY_LINK([],
- [ extern const char *const sys_errlist[]; printf("%s", sys_errlist[0]);],
+ AC_TRY_LINK([],
+ [ extern const char *const sys_errlist[]; printf("%s", sys_errlist[0]);],
[ ac_cv_libc_defines_sys_errlist="yes" ],
[ ac_cv_libc_defines_sys_errlist="no" ]
)
AC_CACHE_CHECK([if libc defines sys_nerr], ac_cv_libc_defines_sys_nerr, [
- AC_TRY_LINK([],
- [ extern int sys_nerr; printf("%i", sys_nerr);],
+ AC_TRY_LINK([],
+ [ extern int sys_nerr; printf("%i", sys_nerr);],
[ ac_cv_libc_defines_sys_nerr="yes" ],
[ ac_cv_libc_defines_sys_nerr="no" ]
)
AC_DEFINE(HAVE_SYS_NERR)
fi
-SCARD_MSG="no"
+SCARD_MSG="no"
# Check whether user wants sectok support
AC_ARG_WITH(sectok,
[ --with-sectok Enable smartcard support using libsectok],
fi
AC_DEFINE(SMARTCARD)
AC_DEFINE(USE_SECTOK)
- SCARD_MSG="yes, using sectok"
+ SCARD_MSG="yes, using sectok"
fi
]
)
LDFLAGS="$LDFLAGS $LIBOPENSC_LIBS"
AC_DEFINE(SMARTCARD)
AC_DEFINE(USE_OPENSC)
- SCARD_MSG="yes, using OpenSC"
+ SCARD_MSG="yes, using OpenSC"
fi
fi
# Check libraries needed by DNS fingerprint support
-AC_SEARCH_LIBS(getrrsetbyname, resolv,
+AC_SEARCH_LIBS(getrrsetbyname, resolv,
[AC_DEFINE(HAVE_GETRRSETBYNAME)],
[
# Needed by our getrrsetbyname()
])
# Check whether user wants Kerberos 5 support
-KRB5_MSG="no"
+KRB5_MSG="no"
AC_ARG_WITH(kerberos5,
- [ --with-kerberos5=PATH Enable Kerberos 5 support],
- [
- if test "x$withval" != "xno" ; then
- if test "x$withval" = "xyes" ; then
- KRB5ROOT="/usr/local"
- else
- KRB5ROOT=${withval}
- fi
+ [ --with-kerberos5=PATH Enable Kerberos 5 support],
+ [
+ if test "x$withval" != "xno" ; then
+ if test "x$withval" = "xyes" ; then
+ KRB5ROOT="/usr/local"
+ else
+ KRB5ROOT=${withval}
+ fi
CPPFLAGS="$CPPFLAGS -I${KRB5ROOT}/include"
- LDFLAGS="$LDFLAGS -L${KRB5ROOT}/lib"
- AC_DEFINE(KRB5)
+ LDFLAGS="$LDFLAGS -L${KRB5ROOT}/lib"
+ AC_DEFINE(KRB5)
KRB5_MSG="yes"
- AC_MSG_CHECKING(whether we are using Heimdal)
- AC_TRY_COMPILE([ #include <krb5.h> ],
- [ char *tmp = heimdal_version; ],
- [ AC_MSG_RESULT(yes)
- AC_DEFINE(HEIMDAL)
- K5LIBS="-lkrb5 -ldes -lcom_err -lasn1 -lroken"
- ],
- [ AC_MSG_RESULT(no)
- K5LIBS="-lkrb5 -lk5crypto -lcom_err"
- ]
- )
- if test ! -z "$need_dash_r" ; then
- LDFLAGS="$LDFLAGS -R${KRB5ROOT}/lib"
- fi
- if test ! -z "$blibpath" ; then
- blibpath="$blibpath:${KRB5ROOT}/lib"
- fi
+ AC_MSG_CHECKING(whether we are using Heimdal)
+ AC_TRY_COMPILE([ #include <krb5.h> ],
+ [ char *tmp = heimdal_version; ],
+ [ AC_MSG_RESULT(yes)
+ AC_DEFINE(HEIMDAL)
+ K5LIBS="-lkrb5 -ldes -lcom_err -lasn1 -lroken"
+ ],
+ [ AC_MSG_RESULT(no)
+ K5LIBS="-lkrb5 -lk5crypto -lcom_err"
+ ]
+ )
+ if test ! -z "$need_dash_r" ; then
+ LDFLAGS="$LDFLAGS -R${KRB5ROOT}/lib"
+ fi
+ if test ! -z "$blibpath" ; then
+ blibpath="$blibpath:${KRB5ROOT}/lib"
+ fi
AC_SEARCH_LIBS(dn_expand, resolv)
AC_CHECK_LIB(gssapi,gss_init_sec_context,
K5LIBS="-lgssapi $K5LIBS" ],
[ AC_CHECK_LIB(gssapi_krb5,gss_init_sec_context,
[ AC_DEFINE(GSSAPI)
- K5LIBS="-lgssapi_krb5 $K5LIBS" ],
+ K5LIBS="-lgssapi_krb5 $K5LIBS" ],
AC_MSG_WARN([Cannot find any suitable gss-api library - build may fail]),
$K5LIBS)
],
AC_CHECK_HEADER(gssapi.h, ,
[ unset ac_cv_header_gssapi_h
- CPPFLAGS="$CPPFLAGS -I${KRB5ROOT}/include/gssapi"
+ CPPFLAGS="$CPPFLAGS -I${KRB5ROOT}/include/gssapi"
AC_CHECK_HEADERS(gssapi.h, ,
AC_MSG_WARN([Cannot find any suitable gss-api header - build may fail])
- )
+ )
]
)
AC_CHECK_HEADER(gssapi_krb5.h, ,
[ CPPFLAGS="$oldCPP" ])
- KRB5=yes
- fi
- ]
+ KRB5=yes
+ fi
+ ]
)
LIBS="$LIBS $K5LIBS"
if test -z "$no_dev_ptmx" ; then
if test "x$disable_ptmx_check" != "xyes" ; then
- AC_CHECK_FILE("/dev/ptmx",
+ AC_CHECK_FILE("/dev/ptmx",
[
AC_DEFINE_UNQUOTED(HAVE_DEV_PTMX)
have_dev_ptmx=1
)
fi
fi
-AC_CHECK_FILE("/dev/ptc",
+AC_CHECK_FILE("/dev/ptc",
[
AC_DEFINE_UNQUOTED(HAVE_DEV_PTS_AND_PTC)
have_dev_ptc=1
AC_SUBST(mansubdir)
# Check whether to enable MD5 passwords
-MD5_MSG="no"
+MD5_MSG="no"
AC_ARG_WITH(md5-passwords,
[ --with-md5-passwords Enable use of MD5 passwords],
[
if test "x$withval" != "xno" ; then
AC_DEFINE(HAVE_MD5_PASSWORDS)
- MD5_MSG="yes"
+ MD5_MSG="yes"
fi
]
)
DISPLAY_HACK_MSG="yes"
AC_DEFINE(IPADDR_IN_DISPLAY)
else
- DISPLAY_HACK_MSG="no"
+ DISPLAY_HACK_MSG="no"
AC_ARG_WITH(ipaddr-display,
[ --with-ipaddr-display Use ip address instead of hostname in \$DISPLAY],
[
if test "x$withval" != "xno" ; then
AC_DEFINE(IPADDR_IN_DISPLAY)
- DISPLAY_HACK_MSG="yes"
+ DISPLAY_HACK_MSG="yes"
fi
]
)
fi
# Whether to mess with the default path
-SERVER_PATH_MSG="(default)"
+SERVER_PATH_MSG="(default)"
AC_ARG_WITH(default-path,
[ --with-default-path= Specify default \$PATH environment for server],
[
$external_path_file .])
fi
user_path="$withval"
- SERVER_PATH_MSG="$withval"
+ SERVER_PATH_MSG="$withval"
fi
],
[ if test "x$external_path_file" = "x/etc/login.conf" ; then
AC_MSG_CHECKING([if we need to convert IPv4 in IPv6-mapped addresses])
-IPV4_IN6_HACK_MSG="no"
+IPV4_IN6_HACK_MSG="no"
AC_ARG_WITH(4in6,
[ --with-4in6 Check for and convert IPv4 in IPv6 mapped addresses],
[
if test "x$withval" != "xno" ; then
AC_MSG_RESULT(yes)
AC_DEFINE(IPV4_IN_IPV6)
- IPV4_IN6_HACK_MSG="yes"
+ IPV4_IN6_HACK_MSG="yes"
else
AC_MSG_RESULT(no)
fi
if test "x$inet6_default_4in6" = "xyes"; then
AC_MSG_RESULT([yes (default)])
AC_DEFINE(IPV4_IN_IPV6)
- IPV4_IN6_HACK_MSG="yes"
+ IPV4_IN6_HACK_MSG="yes"
else
AC_MSG_RESULT([no (default)])
fi
if test ! -d $piddir ; then
piddir=`eval echo ${sysconfdir}`
case $piddir in
- NONE/*) piddir=`echo $piddir | sed "s~NONE~$ac_default_prefix~"` ;;
+ NONE/*) piddir=`echo $piddir | sed "s~NONE~$ac_default_prefix~"` ;;
esac
fi
[ --disable-pututline disable use of pututline() etc. ([uw]tmp) [no]],
[
if test "x$enableval" = "xno" ; then
- AC_DEFINE(DISABLE_PUTUTLINE)
+ AC_DEFINE(DISABLE_PUTUTLINE)
fi
]
)
if test "x$PAM_MSG" = "xyes" ; then
echo "PAM is enabled. You may need to install a PAM control file "
echo "for sshd, otherwise password authentication may fail. "
- echo "Example PAM control files can be found in the contrib/ "
+ echo "Example PAM control files can be found in the contrib/ "
echo "subdirectory"
echo ""
fi
-Other patches and addons for OpenSSH. Please send submissions to
+Other patches and addons for OpenSSH. Please send submissions to
djm@mindrot.org
Externally maintained
SSH Proxy Command -- connect.c
Shun-ichi GOTO <gotoh@imasy.or.jp> has written a very useful ProxyCommand
-which allows the use of outbound SSH from behind a SOCKS4, SOCKS5 or
+which allows the use of outbound SSH from behind a SOCKS4, SOCKS5 or
https CONNECT style proxy server. His page for connect.c has extensive
documentation on its use as well as compiled versions for Win32.
mdoc2man.pl:
Converts mdoc formated manpages into normal manpages. This can be used
-on Solaris machines to provide manpages that are not preformated.
+on Solaris machines to provide manpages that are not preformated.
Contributed by Mark D. Roth <roth@feep.net>
redhat:
# Author: Darren Tucker (dtucker at zip dot com dot au)
# This file is placed in the public domain and comes with absolutely
# no warranty.
-#
+#
# Based originally on Ben Lindstrom's buildpkg.sh for Solaris
#
if [ ! -f Makefile ]
then
echo "Makefile not found (did you run configure?)"
- exit 1
+ exit 1
fi
#
PRIVSEP_PATH=/var/empty
fi
-# Clean package build directory
+# Clean package build directory
rm -rf $objdir/$PKGDIR
FAKE_ROOT=$objdir/$PKGDIR/root
mkdir -p $FAKE_ROOT
-# Start by faking root install
+# Start by faking root install
echo "Faking root install..."
cd $objdir
make install-nokeys DESTDIR=$FAKE_ROOT
#
# Set ssh and sshd parameters as per config.local
#
-if [ "${PERMIT_ROOT_LOGIN}" = no ]
+if [ "${PERMIT_ROOT_LOGIN}" = no ]
then
- perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
- $FAKE_ROOT/${sysconfdir}/sshd_config
+ perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
+ $FAKE_ROOT/${sysconfdir}/sshd_config
fi
if [ "${X11_FORWARDING}" = yes ]
then
- perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
- $FAKE_ROOT/${sysconfdir}/sshd_config
+ perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
+ $FAKE_ROOT/${sysconfdir}/sshd_config
fi
echo Creating configs from defaults if necessary.
for cfgfile in ssh_config sshd_config ssh_prng_cmds
do
- if [ ! -f $sysconfdir/\$cfgfile ]
- then
- echo "Creating \$cfgfile from default"
- cp $sysconfdir/\$cfgfile.default $sysconfdir/\$cfgfile
- else
- echo "\$cfgfile already exists."
- fi
+ if [ ! -f $sysconfdir/\$cfgfile ]
+ then
+ echo "Creating \$cfgfile from default"
+ cp $sysconfdir/\$cfgfile.default $sysconfdir/\$cfgfile
+ else
+ echo "\$cfgfile already exists."
+ fi
done
echo
# Generate keys unless they already exist
echo Creating host keys if required.
if [ -f "$sysconfdir/ssh_host_key" ] ; then
- echo "$sysconfdir/ssh_host_key already exists, skipping."
+ echo "$sysconfdir/ssh_host_key already exists, skipping."
else
- $bindir/ssh-keygen -t rsa1 -f $sysconfdir/ssh_host_key -N ""
+ $bindir/ssh-keygen -t rsa1 -f $sysconfdir/ssh_host_key -N ""
fi
if [ -f $sysconfdir/ssh_host_dsa_key ] ; then
- echo "$sysconfdir/ssh_host_dsa_key already exists, skipping."
+ echo "$sysconfdir/ssh_host_dsa_key already exists, skipping."
else
- $bindir/ssh-keygen -t dsa -f $sysconfdir/ssh_host_dsa_key -N ""
+ $bindir/ssh-keygen -t dsa -f $sysconfdir/ssh_host_dsa_key -N ""
fi
if [ -f $sysconfdir/ssh_host_rsa_key ] ; then
- echo "$sysconfdir/ssh_host_rsa_key already exists, skipping."
-else
- $bindir/ssh-keygen -t rsa -f $sysconfdir/ssh_host_rsa_key -N ""
+ echo "$sysconfdir/ssh_host_rsa_key already exists, skipping."
+else
+ $bindir/ssh-keygen -t rsa -f $sysconfdir/ssh_host_rsa_key -N ""
fi
echo
rm -f $PKGNAME-$VERSION.bff
(
echo "./lpp_name"
- find . ! -name lpp_name -a ! -name . -print
+ find . ! -name lpp_name -a ! -name . -print
) | backup -i -q -f ../$PKGNAME-$VERSION.bff $filelist
#
} elsif ( -d $_ ) {
# Entry is Directory
print "\ttype=DIRECTORY\n";
- }
+ }
}'
keygen=@sshkeygen@
if [ -f $keydir/ssh_host_key -o \
- -f $keydir/ssh_host_key.pub ]; then
+ -f $keydir/ssh_host_key.pub ]; then
echo "You already have an SSH1 RSA host key in $keydir/ssh_host_key."
else
echo "Generating 1024 bit SSH1 RSA host key."
fi
if [ -f $keydir/ssh_host_rsa_key -o \
- -f $keydir/ssh_host_rsa_key.pub ]; then
+ -f $keydir/ssh_host_rsa_key.pub ]; then
echo "You already have an SSH2 RSA host key in $keydir/ssh_host_rsa_key."
else
echo "Generating 1024 bit SSH2 RSA host key."
fi
if [ -f $keydir/ssh_host_dsa_key -o \
- -f $keydir/ssh_host_dsa_key.pub ]; then
+ -f $keydir/ssh_host_dsa_key.pub ]; then
echo "You already have an SSH2 DSA host key in $keydir/ssh_host_dsa_key."
else
echo "Generating SSH2 DSA host key."
SVIemptyConfig @sysconfdir@/sshd_config && exit 6
if [ ! \( -f @sysconfdir@/ssh_host_key -a \
- -f @sysconfdir@/ssh_host_key.pub \) -a \
+ -f @sysconfdir@/ssh_host_key.pub \) -a \
! \( -f @sysconfdir@/ssh_host_rsa_key -a \
- -f @sysconfdir@/ssh_host_rsa_key.pub \) -a \
+ -f @sysconfdir@/ssh_host_rsa_key.pub \) -a \
! \( -f @sysconfdir@/ssh_host_dsa_key -a \
- -f @sysconfdir@/ssh_host_dsa_key.pub \) ]; then
+ -f @sysconfdir@/ssh_host_dsa_key.pub \) ]; then
echo "$SVIsubsys: host key not initialized: skipped!"
echo "$SVIsubsys: use ssh-host-keygen to generate one!"
---------------------------------------------
2003 Server has a funny new feature. When starting services under SYSTEM
-account, these services have nearly all user rights which SYSTEM holds...
+account, these services have nearly all user rights which SYSTEM holds...
except for the "Create a token object" right, which is needed to allow
public key authentication :-(
If you are installing OpenSSH the first time, you can generate global config
files and server keys by running
-
+
/usr/bin/ssh-host-config
Note that this binary archive doesn't contain default config files in /etc.
net user sshd >/dev/null 2>&1 && sshd_in_sam=yes
if [ "${sshd_in_passwd}" != "yes" ]
then
- if [ "${sshd_in_sam}" != "yes" ]
+ if [ "${sshd_in_sam}" != "yes" ]
then
echo "Warning: The following function requires administrator privileges!"
if request "Should this script create a local user 'sshd' on this machine?"
then
grep -v 'sshd[ \t][ \t]*22' "${_services}" > "${_serv_tmp}"
if [ -f "${_serv_tmp}" ]
- then
+ then
if mv "${_serv_tmp}" "${_services}"
then
echo "Removing sshd from ${_wservices}"
else
echo "Removing sshd from ${_wservices} failed!"
- fi
+ fi
rm -f "${_serv_tmp}"
else
echo "Removing sshd from ${_wservices} failed!"
then
if mv "${_inetcnf_tmp}" "${_inetcnf}"
then
- echo "Removed sshd from ${_inetcnf}"
+ echo "Removed sshd from ${_inetcnf}"
else
- echo "Removing sshd from ${_inetcnf} failed!"
+ echo "Removing sshd from ${_inetcnf} failed!"
fi
rm -f "${_inetcnf_tmp}"
else
do
if [ -n "${password_value}" ]
then
- _password="${password_value}"
+ _password="${password_value}"
# Allow to ask for password if first try fails
password_value=""
else
fi
if [ -n "${cygwin_value}" ]
then
- _cygwin="${cygwin_value}"
+ _cygwin="${cygwin_value}"
else
echo
echo "Which value should the environment variable CYGWIN have when"
then
if [ $_nt2003 -gt 0 -a "${sshd_server_in_sam}" = "yes" ]
then
- _user="sshd_server"
+ _user="sshd_server"
else
- _user="system"
+ _user="system"
fi
chown "${_user}" ${SYSCONFDIR}/ssh*
chown "${_user}".544 ${LOCALSTATEDIR}/empty
# 2002-08-04: Added public domain notice.
# 2003-06-24: Incorporated readme, set library paths. First cvs version.
#
-# "OpenSSL headers do not match your library" are usually caused by
+# "OpenSSL headers do not match your library" are usually caused by
# OpenSSH's configure picking up an older version of OpenSSL headers
# or libraries. You can use the following # procedure to help identify
# the cause.
-#
+#
# The output of configure will tell you the versions of the OpenSSL
# headers and libraries that were picked up, for example:
-#
+#
# checking OpenSSL header version... 90604f (OpenSSL 0.9.6d 9 May 2002)
# checking OpenSSL library version... 90602f (OpenSSL 0.9.6b [engine] 9 Jul 2001)
# checking whether OpenSSL's headers match the library... no
# configure: error: Your OpenSSL headers do not match your library
-#
+#
# Now run findssl.sh. This should identify the headers and libraries
# present and their versions. You should be able to identify the
# libraries and headers used and adjust your CFLAGS or remove incorrect
# Searching for OpenSSL header files.
# 0x0090604fL /usr/include/openssl/opensslv.h
# 0x0090604fL /usr/local/ssl/include/openssl/opensslv.h
-#
+#
# Searching for OpenSSL shared library files.
# 0x0090602fL /lib/libcrypto.so.0.9.6b
# 0x0090602fL /lib/libcrypto.so.2
# 0x0090581fL /usr/lib/libcrypto.so.0.9.5a
# 0x0090600fL /usr/lib/libcrypto.so.0.9.6
# 0x0090600fL /usr/lib/libcrypto.so.1
-#
+#
# Searching for OpenSSL static library files.
# 0x0090602fL /usr/lib/libcrypto.a
# 0x0090604fL /usr/local/ssl/lib/libcrypto.a
-#
+#
# In this example, I gave configure no extra flags, so it's picking up
# the OpenSSL header from /usr/include/openssl (90604f) and the library
# from /usr/lib/ (90602f).
*/
/*
- * This is a simple GNOME SSH passphrase grabber. To use it, set the
- * environment variable SSH_ASKPASS to point to the location of
- * gnome-ssh-askpass before calling "ssh-add < /dev/null".
+ * This is a simple GNOME SSH passphrase grabber. To use it, set the
+ * environment variable SSH_ASKPASS to point to the location of
+ * gnome-ssh-askpass before calling "ssh-add < /dev/null".
*
* There is only two run-time options: if you set the environment variable
* "GNOME_SSH_ASKPASS_GRAB_SERVER=true" then gnome-ssh-askpass will grab
- * the X server. If you set "GNOME_SSH_ASKPASS_GRAB_POINTER=true", then the
- * pointer will be grabbed too. These may have some benefit to security if
+ * the X server. If you set "GNOME_SSH_ASKPASS_GRAB_POINTER=true", then the
+ * pointer will be grabbed too. These may have some benefit to security if
* you don't trust your X server. We grab the keyboard always.
*/
}
entry = gtk_entry_new();
- gtk_box_pack_start(GTK_BOX(GNOME_DIALOG(dialog)->vbox), entry, FALSE,
+ gtk_box_pack_start(GTK_BOX(GNOME_DIALOG(dialog)->vbox), entry, FALSE,
FALSE, 0);
gtk_entry_set_visibility(GTK_ENTRY(entry), FALSE);
gtk_widget_grab_focus(entry);
/* Grab focus */
if (grab_server)
XGrabServer(GDK_DISPLAY());
- if (grab_pointer && gdk_pointer_grab(dialog->window, TRUE, 0,
+ if (grab_pointer && gdk_pointer_grab(dialog->window, TRUE, 0,
NULL, NULL, GDK_CURRENT_TIME))
goto nograb;
if (gdk_keyboard_grab(dialog->window, FALSE, GDK_CURRENT_TIME))
/* GTK2 support by Nalin Dahyabhai <nalin@redhat.com> */
/*
- * This is a simple GNOME SSH passphrase grabber. To use it, set the
- * environment variable SSH_ASKPASS to point to the location of
- * gnome-ssh-askpass before calling "ssh-add < /dev/null".
+ * This is a simple GNOME SSH passphrase grabber. To use it, set the
+ * environment variable SSH_ASKPASS to point to the location of
+ * gnome-ssh-askpass before calling "ssh-add < /dev/null".
*
* There is only two run-time options: if you set the environment variable
* "GNOME_SSH_ASKPASS_GRAB_SERVER=true" then gnome-ssh-askpass will grab
- * the X server. If you set "GNOME_SSH_ASKPASS_GRAB_POINTER=true", then the
- * pointer will be grabbed too. These may have some benefit to security if
+ * the X server. If you set "GNOME_SSH_ASKPASS_GRAB_POINTER=true", then the
+ * pointer will be grabbed too. These may have some benefit to security if
* you don't trust your X server. We grab the keyboard always.
*/
message);
entry = gtk_entry_new();
- gtk_box_pack_start(GTK_BOX(GTK_DIALOG(dialog)->vbox), entry, FALSE,
+ gtk_box_pack_start(GTK_BOX(GTK_DIALOG(dialog)->vbox), entry, FALSE,
FALSE, 0);
gtk_entry_set_visibility(GTK_ENTRY(entry), FALSE);
gtk_widget_grab_focus(entry);
if (grab_pointer) {
for(;;) {
status = gdk_pointer_grab(
- (GTK_WIDGET(dialog))->window, TRUE, 0, NULL,
+ (GTK_WIDGET(dialog))->window, TRUE, 0, NULL,
NULL, GDK_CURRENT_TIME);
if (status == GDK_GRAB_SUCCESS)
break;
--with-pam \
%endif
%if %{kerberos5}
- --with-kerberos5=/usr/kerberos \
+ --with-kerberos5=/usr/kerberos \
%endif
%changelog
* Mon Jun 2 2003 Damien Miller <djm@mindrot.org>
-- Remove noip6 option. This may be controlled at run-time in client config
+- Remove noip6 option. This may be controlled at run-time in client config
file using new AddressFamily directive
* Mon May 12 2003 Damien Miller <djm@mindrot.org>
* Sun Apr 8 2001 Preston Brown <pbrown@redhat.com>
- remove explicit openssl requirement, fixes builddistro issue
-- make initscript stop() function wait until sshd really dead to avoid
+- make initscript stop() function wait until sshd really dead to avoid
races in condrestart
* Mon Apr 2 2001 Nalin Dahyabhai <nalin@redhat.com>
If all goes well you should have a solaris package ready to be installed.
-If you have any problems with this script please post them to
+If you have any problems with this script please post them to
openssh-unix-dev@mindrot.org and I will try to assist you as best as I can.
- Ben Lindstrom
# The following code has been provide under Public Domain License. I really
# don't care what you use it for. Just as long as you don't complain to me
# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
-#
+#
umask 022
#
# Options for building the package
#
# uncommenting TEST_DIR and using
# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
-# and
+# and
# PKGNAME=tOpenSSH should allow testing a package without interfering
# with a real OpenSSH package on a system. This is not needed on systems
# that support the -R option to pkgadd.
# we will look for config.local to override the above options
[ -s ./config.local ] && . ./config.local
-## Start by faking root install
+## Start by faking root install
echo "Faking root install..."
START=`pwd`
OPENSSHD_IN=`dirname $0`/opensshd.in
## Fill in some details, like prefix and sysconfdir
for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir
do
- eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
+ eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
done
## Collect value of privsep user
for confvar in SSH_PRIVSEP_USER
do
- eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
+ eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
done
## Set privsep defaults if not defined
if [ -z "$SSH_PRIVSEP_USER" ]
then
- SSH_PRIVSEP_USER=sshd
+ SSH_PRIVSEP_USER=sshd
fi
## Extract common info requires for the 'info' part of the package.
if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
then
- echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
- echo "or group."
+ echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
+ echo "or group."
else
- echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."
+ echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."
- # create group if required
- if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
- then
- echo "PrivSep group $SSH_PRIVSEP_USER already exists."
- else
+ # create group if required
+ if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+ then
+ echo "PrivSep group $SSH_PRIVSEP_USER already exists."
+ else
# Use gid of 67 if possible
if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
then
else
sshdgid="-g $SSHDGID"
fi
- echo "Creating PrivSep group $SSH_PRIVSEP_USER."
- \$chroot /usr/sbin/groupadd \$sshdgid $SSH_PRIVSEP_USER
- fi
-
- # Create user if required
- if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
- then
- echo "PrivSep user $SSH_PRIVSEP_USER already exists."
- else
+ echo "Creating PrivSep group $SSH_PRIVSEP_USER."
+ \$chroot /usr/sbin/groupadd \$sshdgid $SSH_PRIVSEP_USER
+ fi
+
+ # Create user if required
+ if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
+ then
+ echo "PrivSep user $SSH_PRIVSEP_USER already exists."
+ else
# Use uid of 67 if possible
if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDGID'\$' >/dev/null
then
else
sshduid="-u $SSHDUID"
fi
- echo "Creating PrivSep user $SSH_PRIVSEP_USER."
+ echo "Creating PrivSep user $SSH_PRIVSEP_USER."
\$chroot /usr/sbin/useradd -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
\$chroot /usr/bin/passwd -l $SSH_PRIVSEP_USER
- fi
+ fi
fi
[ "\${POST_INS_START}" = "yes" ] && ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
BEGIN { print "i pkginfo"; print "i preinstall"; \\
print "i postinstall"; print "i preremove"; \\
print "i request"; print "i space"; \\
- split("$SYSTEM_DIR",sys_files); }
+ split("$SYSTEM_DIR",sys_files); }
{
for (dir in sys_files) { if ( \$3 != sys_files[dir] )
- { \$5="root"; \$6="sys"; }
- else
- { \$4="?"; \$5="?"; \$6="?"; break;}
+ { \$5="root"; \$6="sys"; }
+ else
+ { \$4="?"; \$5="?"; \$6="?"; break;}
} }
{ print; }
_EOF
checkkeys() {
if [ ! -f $HOST_KEY_RSA1 ]; then
- ${SSH_KEYGEN} -t rsa1 -f ${HOST_KEY_RSA1} -N ""
+ ${SSH_KEYGEN} -t rsa1 -f ${HOST_KEY_RSA1} -N ""
fi
if [ ! -f $HOST_KEY_DSA ]; then
- ${SSH_KEYGEN} -t dsa -f ${HOST_KEY_DSA} -N ""
+ ${SSH_KEYGEN} -t dsa -f ${HOST_KEY_DSA} -N ""
fi
if [ ! -f $HOST_KEY_RSA ]; then
- ${SSH_KEYGEN} -t rsa -f ${HOST_KEY_RSA} -N ""
+ ${SSH_KEYGEN} -t rsa -f ${HOST_KEY_RSA} -N ""
fi
}
stop_service() {
if [ -r $PIDFILE -a ! -z ${PIDFILE} ]; then
- PID=`${CAT} ${PIDFILE}`
+ PID=`${CAT} ${PIDFILE}`
fi
if [ ${PID:=0} -gt 1 -a ! "X$PID" = "X " ]; then
- ${KILL} ${PID}
+ ${KILL} ${PID}
else
- echo "Unable to read PID file"
+ echo "Unable to read PID file"
fi
}
sshd_rc=$?
if [ $sshd_rc -ne 0 ]; then
- echo "$0: Error ${sshd_rc} starting ${SSHD}... bailing."
- exit $sshd_rc
+ echo "$0: Error ${sshd_rc} starting ${SSHD}... bailing."
+ exit $sshd_rc
fi
echo done.
}
arbitrary TCP/IP ports can also be forwarded over the secure channel.
OpenSSH is OpenBSD's rework of the last free version of SSH, bringing it
-up to date in terms of security and features, as well as removing all
+up to date in terms of security and features, as well as removing all
patented algorithms to seperate libraries (OpenSSL).
This package includes all files necessary for both the OpenSSH
cd contrib
gcc -O -g `gnome-config --cflags gnome gnomeui` \
- gnome-ssh-askpass.c -o gnome-ssh-askpass \
- `gnome-config --libs gnome gnomeui`
+ gnome-ssh-askpass.c -o gnome-ssh-askpass \
+ `gnome-config --libs gnome gnomeui`
cd ..
%install
echo " /var/adm/fillup-templates/rc.config.sshd"
fi
if [ ! -f /etc/ssh/ssh_host_key -o ! -s /etc/ssh/ssh_host_key ]; then
- echo "Generating SSH host key..."
+ echo "Generating SSH host key..."
/usr/bin/ssh-keygen -b 1024 -f /etc/ssh/ssh_host_key -N '' >&2
fi
if [ ! -f /etc/ssh/ssh_host_dsa_key -o ! -s /etc/ssh/ssh_host_dsa_key ]; then
- echo "Generating SSH DSA host key..."
+ echo "Generating SSH DSA host key..."
/usr/bin/ssh-keygen -d -f /etc/ssh/ssh_host_dsa_key -N '' >&2
fi
if test -r /var/run/sshd.pid
then
- echo "Restarting the running SSH daemon..."
+ echo "Restarting the running SSH daemon..."
/usr/sbin/rcsshd restart >&2
fi
%preun
if [ "$1" = 0 ]
then
- echo "Stopping the SSH daemon..."
+ echo "Stopping the SSH daemon..."
/usr/sbin/rcsshd stop >&2
echo "Removing SSH stop/start scripts from the rc directories..."
- rm /sbin/init.d/rc2.d/K20sshd
- rm /sbin/init.d/rc2.d/S20sshd
- rm /sbin/init.d/rc3.d/K20sshd
- rm /sbin/init.d/rc3.d/S20sshd
+ rm /sbin/init.d/rc2.d/K20sshd
+ rm /sbin/init.d/rc2.d/S20sshd
+ rm /sbin/init.d/rc3.d/K20sshd
+ rm /sbin/init.d/rc3.d/S20sshd
fi
%files
%defattr(-,root,root)
-%doc ChangeLog OVERVIEW README*
+%doc ChangeLog OVERVIEW README*
%doc RFC.nroff TODO CREDITS LICENCE
%attr(0755,root,root) %dir /etc/ssh
%attr(0644,root,root) %config /etc/ssh/ssh_config
# define S_ISDIR(mode) (((mode) & (_S_IFMT)) == (_S_IFDIR))
#endif /* S_ISDIR */
-#ifndef S_ISREG
+#ifndef S_ISREG
# define S_ISREG(mode) (((mode) & (_S_IFMT)) == (_S_IFREG))
#endif /* S_ISREG */
-/* $OpenBSD: dns.c,v 1.8 2003/11/12 16:39:58 jakob Exp $ */
+/* $OpenBSD: dns.c,v 1.9 2003/11/21 11:57:03 djm Exp $ */
/*
* Copyright (c) 2003 Wesley Griffin. All rights reserved.
#include "uuencode.h"
extern char *__progname;
-RCSID("$OpenBSD: dns.c,v 1.8 2003/11/12 16:39:58 jakob Exp $");
+RCSID("$OpenBSD: dns.c,v 1.9 2003/11/21 11:57:03 djm Exp $");
#ifndef LWRES
static const char *errset_text[] = {
/*
* Verify the given hostname, address and host key using DNS.
- * Returns 0 if lookup succeeds, -1 otherwise
+ * Returns 0 if lookup succeeds, -1 otherwise
*/
int
verify_host_key_dns(const char *hostname, struct sockaddr *address,
/*
* Portable OpenSSH PRNG seeding:
- * If OpenSSL has not "internally seeded" itself (e.g. pulled data from
- * /dev/random), then we execute a "ssh-rand-helper" program which
- * collects entropy and writes it to stdout. The child program must
+ * If OpenSSL has not "internally seeded" itself (e.g. pulled data from
+ * /dev/random), then we execute a "ssh-rand-helper" program which
+ * collects entropy and writes it to stdout. The child program must
* write at least RANDOM_SEED_SIZE bytes. The child is run with stderr
* attached, so error/debugging output should be visible.
*
close(p[1]);
close(devnull);
- if (original_uid != original_euid &&
- ( seteuid(getuid()) == -1 ||
+ if (original_uid != original_euid &&
+ ( seteuid(getuid()) == -1 ||
setuid(original_uid) == -1) ) {
- fprintf(stderr, "(rand child) setuid(%li): %s\n",
+ fprintf(stderr, "(rand child) setuid(%li): %s\n",
(long int)original_uid, strerror(errno));
_exit(1);
}
execl(SSH_RAND_HELPER, "ssh-rand-helper", NULL);
- fprintf(stderr, "(rand child) Couldn't exec '%s': %s\n",
+ fprintf(stderr, "(rand child) Couldn't exec '%s': %s\n",
SSH_RAND_HELPER, strerror(errno));
_exit(1);
}
close(p[0]);
if (waitpid(pid, &ret, 0) == -1)
- fatal("Couldn't wait for ssh-rand-helper completion: %s",
+ fatal("Couldn't wait for ssh-rand-helper completion: %s",
strerror(errno));
signal(SIGCHLD, old_sigchld);
/* We don't mind if the child exits upon a SIGPIPE */
- if (!WIFEXITED(ret) &&
+ if (!WIFEXITED(ret) &&
(!WIFSIGNALED(ret) || WTERMSIG(ret) != SIGPIPE))
fatal("ssh-rand-helper terminated abnormally");
if (WEXITSTATUS(ret) != 0)
}
void
-init_rng(void)
+init_rng(void)
{
/*
* OpenSSL version numbers: MNNFFPPS: major minor fix patch status
($null, $null, $rate) = split(/,/, $ent[0]);
$est = $rate / $entscale; # scale the estimate back
}
- }
+ }
print OUT "\"$cmd\" $path $est\n";
}
-/* $OpenBSD: gss-genr.c,v 1.2 2003/11/17 11:06:07 markus Exp $ */
+/* $OpenBSD: gss-genr.c,v 1.3 2003/11/21 11:57:03 djm Exp $ */
/*
* Copyright (c) 2001-2003 Simon Wilkinson. All rights reserved.
}
void
-ssh_gssapi_buildmic(Buffer *b, const char *user, const char *service,
- const char *context)
+ssh_gssapi_buildmic(Buffer *b, const char *user, const char *service,
+ const char *context)
{
buffer_init(b);
buffer_put_string(b, session_id2, session_id2_len);
-/* $OpenBSD: gss-serv-krb5.c,v 1.1 2003/08/22 10:56:09 markus Exp $ */
+/* $OpenBSD: gss-serv-krb5.c,v 1.2 2003/11/21 11:57:03 djm Exp $ */
/*
* Copyright (c) 2001-2003 Simon Wilkinson. All rights reserved.
/* Initialise the krb5 library, for the stuff that GSSAPI won't do */
-static int
+static int
ssh_gssapi_krb5_init()
{
krb5_error_code problem;
{
int tmpfd;
char ccname[40];
-
- snprintf(ccname, sizeof(ccname),
+
+ snprintf(ccname, sizeof(ccname),
"FILE:/tmp/krb5cc_%d_XXXXXX", geteuid());
-
+
if ((tmpfd = mkstemp(ccname + strlen("FILE:"))) == -1) {
logit("mkstemp(): %.100s", strerror(errno));
problem = errno;
}
#endif /* #ifdef HEIMDAL */
- if ((problem = krb5_parse_name(krb_context,
+ if ((problem = krb5_parse_name(krb_context,
client->exportedname.value, &princ))) {
logit("krb5_parse_name(): %.100s",
krb5_get_err_text(krb_context, problem));
krb5_free_principal(krb_context, princ);
- if ((maj_status = gss_krb5_copy_ccache(&min_status,
+ if ((maj_status = gss_krb5_copy_ccache(&min_status,
client->creds, ccache))) {
logit("gss_krb5_copy_ccache() failed");
krb5_cc_destroy(krb_context, ccache);
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
+# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
shift
if [ ! -d "${pathcomp}" ] ;
- then
+ then
$mkdirprog "${pathcomp}"
else
true
# If we're going to rename the final executable, determine the name now.
- if [ x"$transformarg" = x ]
+ if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
- dstfile=`basename $dst $transformbasename |
+ dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
- if [ x"$dstfile" = x ]
+ if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
*/
#include "includes.h"
-RCSID("$OpenBSD: kex.c,v 1.55 2003/04/01 10:31:26 markus Exp $");
+RCSID("$OpenBSD: kex.c,v 1.56 2003/11/21 11:57:03 djm Exp $");
#include <openssl/crypto.h>
xfree(hostkeyalg);
}
-static int
+static int
proposals_match(char *my[PROPOSAL_MAX], char *peer[PROPOSAL_MAX])
{
static int check[] = {
kex->we_need = need;
/* ignore the next message if the proposals do not match */
- if (first_kex_follows && !proposals_match(my, peer) &&
+ if (first_kex_follows && !proposals_match(my, peer) &&
!(datafellows & SSH_BUG_FIRSTKEX)) {
type = packet_read();
debug2("skipping next packet (type %u)", type);
int
login_utmp_only(struct logininfo *li)
{
- li->type = LTYPE_LOGIN;
+ li->type = LTYPE_LOGIN;
login_set_current_time(li);
# ifdef USE_UTMP
utmp_write_entry(li);
lastlog_populate_entry(li, &last);
return (1);
case -1:
- error("%s: Error reading from %s: %s", __func__,
+ error("%s: Error reading from %s: %s", __func__,
LASTLOG_FILE, strerror(errno));
return (0);
default:
/*
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
- * <phk@login.dknet.dk> wrote this file. As long as you retain this
- * notice you can do whatever you want with this stuff. If we meet some
- * day, and you think this stuff is worth it, you can buy me a beer in
+ * <phk@login.dknet.dk> wrote this file. As long as you retain this
+ * notice you can do whatever you want with this stuff. If we meet some
+ * day, and you think this stuff is worth it, you can buy me a beer in
* return. Poul-Henning Kamp
* ----------------------------------------------------------------------------
*/
skip=1
ext=1
if(length(line)&&!(match(line," $")||prenl))
- add(OFS)
+ add(OFS)
} else if(match(words[w],"^Xc$")) {
skip=1
ext=0
if(!extopt)
- prenl++
+ prenl++
w=nwords
} else if(match(words[w],"^Bd$")) {
skip=1
if(match(words[w+1],"-literal")) {
- literal=1
- prenl++
- w=nwords
+ literal=1
+ prenl++
+ w=nwords
}
} else if(match(words[w],"^Ed$")) {
skip=1
} else if(match(words[w],"^Ns$")) {
skip=1
if(!nospace)
- nospace=1
+ nospace=1
sub(" $","",line)
} else if(match(words[w],"^No$")) {
skip=1
add("``")
add(words[++w])
while(w<nwords&&!match(words[w+1],"^[\\.,]"))
- add(OFS words[++w])
+ add(OFS words[++w])
add("''")
if(!nospace&&match(words[w+1],"^[\\.,]"))
- nospace=1
+ nospace=1
} else if(match(words[w],"^Sq|Ql$")) {
skip=1
add("`" words[++w] "'")
if(!nospace&&match(words[w+1],"^[\\.,]"))
- nospace=1
+ nospace=1
} else if(match(words[w],"^Oo$")) {
skip=1
extopt=1
if(!nospace)
- nospace=1
+ nospace=1
add("[")
} else if(match(words[w],"^Oc$")) {
skip=1
}
if(!skip) {
if(!nospace&&length(line)&&!(match(line," $")||prenl))
- add(OFS)
+ add(OFS)
if(nospace==1)
- nospace=0
+ nospace=0
}
if(match(words[w],"^Dd$")) {
date=wtail()
} else if(match(words[w],"^Re$")) {
prenl++
for(i=nrefauthors-1;i>0;i--) {
- add(refauthors[i])
- if(i>1)
- add(", ")
+ add(refauthors[i])
+ if(i>1)
+ add(", ")
}
if(nrefauthors>1)
- add(" and ")
+ add(" and ")
add(refauthors[0] ", \\fI" reftitle "\\fP")
if(length(refissue))
- add(", " refissue)
+ add(", " refissue)
if(length(refdate))
- add(", " refdate)
+ add(", " refdate)
if(length(refopt))
- add(", " refopt)
+ add(", " refopt)
add(".")
reference=0
} else if(reference) {
if(match(words[w],"^%A$")) { refauthors[nrefauthors++]=wtail() }
if(match(words[w],"^%T$")) {
- reftitle=wtail()
- sub("^\"","",reftitle)
- sub("\"$","",reftitle)
+ reftitle=wtail()
+ sub("^\"","",reftitle)
+ sub("\"$","",reftitle)
}
if(match(words[w],"^%N$")) { refissue=wtail() }
if(match(words[w],"^%D$")) { refdate=wtail() }
if(match(words[w],"^%O$")) { refopt=wtail() }
} else if(match(words[w],"^Nm$")) {
if(synopsis) {
- add(".br")
- prenl++
+ add(".br")
+ prenl++
}
n=words[++w]
if(!length(name))
- name=n
+ name=n
if(!length(n))
- n=name
+ n=name
add("\\fB" n "\\fP")
if(!nospace&&match(words[w+1],"^[\\.,]"))
- nospace=1
+ nospace=1
} else if(match(words[w],"^Nd$")) {
add("\\- " wtail())
} else if(match(words[w],"^Fl$")) {
add("\\fB\\-" words[++w] "\\fP")
if(!nospace&&match(words[w+1],"^[\\.,]"))
- nospace=1
+ nospace=1
} else if(match(words[w],"^Ar$")) {
add("\\fI")
if(w==nwords)
- add("file ...\\fP")
+ add("file ...\\fP")
else {
- add(words[++w] "\\fP")
- while(match(words[w+1],"^\\|$"))
- add(OFS words[++w] " \\fI" words[++w] "\\fP")
+ add(words[++w] "\\fP")
+ while(match(words[w+1],"^\\|$"))
+ add(OFS words[++w] " \\fI" words[++w] "\\fP")
}
if(!nospace&&match(words[w+1],"^[\\.,]"))
- nospace=1
+ nospace=1
} else if(match(words[w],"^Cm$")) {
add("\\fB" words[++w] "\\fP")
while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
- add(words[++w])
+ add(words[++w])
} else if(match(words[w],"^Op$")) {
option=1
if(!nospace)
- nospace=1
+ nospace=1
add("[")
} else if(match(words[w],"^Pp$")) {
prenl++
add("\\fI")
w++
if(match(words[w],"^\\."))
- add("\\&")
+ add("\\&")
add(words[w] "\\fP")
while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
- add(words[++w])
+ add(words[++w])
} else if(match(words[w],"^Dv$")) {
add(".BR")
} else if(match(words[w],"^Em|Ev$")) {
plain=1
add("\\fB")
while(w<nwords) {
- w++
- if(match(words[w],"^Op$")) {
- w++
- add("[")
- words[nwords]=words[nwords] "]"
- }
- if(match(words[w],"^Ar$")) {
- add("\\fI" words[++w] "\\fP")
- } else if(match(words[w],"^[\\.,]")) {
- sub(" $","",line)
- if(plain) {
- add("\\fP")
- plain=0
- }
- add(words[w])
- } else {
- if(!plain) {
- add("\\fB")
- plain=1
- }
- add(words[w])
- }
- if(!nospace)
- add(OFS)
+ w++
+ if(match(words[w],"^Op$")) {
+ w++
+ add("[")
+ words[nwords]=words[nwords] "]"
+ }
+ if(match(words[w],"^Ar$")) {
+ add("\\fI" words[++w] "\\fP")
+ } else if(match(words[w],"^[\\.,]")) {
+ sub(" $","",line)
+ if(plain) {
+ add("\\fP")
+ plain=0
+ }
+ add(words[w])
+ } else {
+ if(!plain) {
+ add("\\fB")
+ plain=1
+ }
+ add(words[w])
+ }
+ if(!nospace)
+ add(OFS)
}
sub(" $","",line)
if(plain)
- add("\\fP")
+ add("\\fP")
} else if(match(words[w],"^Bl$")) {
oldoptlist=optlist
if(match(words[w+1],"-bullet"))
- optlist=1
+ optlist=1
else if(match(words[w+1],"-enum")) {
- optlist=2
- enum=0
+ optlist=2
+ enum=0
} else if(match(words[w+1],"-tag"))
- optlist=3
+ optlist=3
else if(match(words[w+1],"-item"))
- optlist=4
+ optlist=4
else if(match(words[w+1],"-bullet"))
- optlist=1
+ optlist=1
w=nwords
} else if(match(words[w],"^El$")) {
optlist=oldoptlist
} else if(match(words[w],"^It$")&&optlist) {
if(optlist==1)
- add(".IP \\(bu")
+ add(".IP \\(bu")
else if(optlist==2)
- add(".IP " ++enum ".")
+ add(".IP " ++enum ".")
else if(optlist==3) {
- add(".TP")
- prenl++
- if(match(words[w+1],"^Pa|Ev$")) {
- add(".B")
- w++
- }
+ add(".TP")
+ prenl++
+ if(match(words[w+1],"^Pa|Ev$")) {
+ add(".B")
+ w++
+ }
} else if(optlist==4)
- add(".IP")
+ add(".IP")
} else if(match(words[w],"^Sm$")) {
if(match(words[w+1],"off"))
- nospace=2
+ nospace=2
else if(match(words[w+1],"on"))
- nospace=0
+ nospace=0
w++
} else if(!skip) {
add(words[w])
esac
if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
+ echo "mkdir $pathcomp"
- mkdir "$pathcomp" || lasterr=$?
+ mkdir "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ fi
fi
pathcomp="$pathcomp/"
-/* $OpenBSD: moduli.c,v 1.1 2003/07/28 09:49:56 djm Exp $ */
+/* $OpenBSD: moduli.c,v 1.2 2003/11/21 11:57:03 djm Exp $ */
/*
* Copyright 1994 Phil Karn <karn@qualcomm.com>
* Copyright 1996-1998, 2003 William Allen Simpson <wsimpson@greendragon.com>
/*
- * Debugging defines
+ * Debugging defines
*/
/* define DEBUG_LARGE 1 */
largememory = memory;
/*
- * Set power to the length in bits of the prime to be generated.
- * This is changed to 1 less than the desired safe prime moduli p.
- */
+ * Set power to the length in bits of the prime to be generated.
+ * This is changed to 1 less than the desired safe prime moduli p.
+ */
if (power > TEST_MAXIMUM) {
error("Too many bits: %u > %lu", power, TEST_MAXIMUM);
return (-1);
power--; /* decrement before squaring */
/*
- * The density of ordinary primes is on the order of 1/bits, so the
- * density of safe primes should be about (1/bits)**2. Set test range
- * to something well above bits**2 to be reasonably sure (but not
- * guaranteed) of catching at least one safe prime.
+ * The density of ordinary primes is on the order of 1/bits, so the
+ * density of safe primes should be about (1/bits)**2. Set test range
+ * to something well above bits**2 to be reasonably sure (but not
+ * guaranteed) of catching at least one safe prime.
*/
largewords = ((power * power) >> (SHIFT_WORD - TEST_POWER));
/*
- * Need idea of how much memory is available. We don't have to use all
- * of it.
+ * Need idea of how much memory is available. We don't have to use all
+ * of it.
*/
if (largememory > LARGE_MAXIMUM) {
logit("Limited memory: %u MB; limit %lu MB",
q = BN_new();
/*
- * Generate random starting point for subprime search, or use
- * specified parameter.
+ * Generate random starting point for subprime search, or use
+ * specified parameter.
*/
largebase = BN_new();
if (start == NULL)
time(&time_start);
- logit("%.24s Sieve next %u plus %u-bit", ctime(&time_start),
+ logit("%.24s Sieve next %u plus %u-bit", ctime(&time_start),
largenumbers, power);
debug2("start point: 0x%s", BN_bn2hex(largebase));
/*
- * TinySieve
- */
+ * TinySieve
+ */
for (i = 0; i < tinybits; i++) {
if (BIT_TEST(TinySieve, i))
continue; /* 2*i+3 is composite */
}
/*
- * Start the small block search at the next possible prime. To avoid
- * fencepost errors, the last pass is skipped.
- */
+ * Start the small block search at the next possible prime. To avoid
+ * fencepost errors, the last pass is skipped.
+ */
for (smallbase = TINY_NUMBER + 3;
smallbase < (SMALL_MAXIMUM - TINY_NUMBER);
smallbase += TINY_NUMBER) {
}
/*
- * SmallSieve
- */
+ * SmallSieve
+ */
for (i = 0; i < smallbits; i++) {
if (BIT_TEST(SmallSieve, i))
continue; /* 2*i+smallbase is composite */
* The result is a list of so-call "safe" primes
*/
int
-prime_test(FILE *in, FILE *out, u_int32_t trials,
+prime_test(FILE *in, FILE *out, u_int32_t trials,
u_int32_t generator_wanted)
{
BIGNUM *q, *p, *a;
count_possible++;
/*
- * The (1/4)^N performance bound on Miller-Rabin is
- * extremely pessimistic, so don't spend a lot of time
- * really verifying that q is prime until after we know
- * that p is also prime. A single pass will weed out the
+ * The (1/4)^N performance bound on Miller-Rabin is
+ * extremely pessimistic, so don't spend a lot of time
+ * really verifying that q is prime until after we know
+ * that p is also prime. A single pass will weed out the
* vast majority of composite q's.
*/
if (BN_is_prime(q, 1, NULL, ctx, NULL) <= 0) {
}
/*
- * q is possibly prime, so go ahead and really make sure
- * that p is prime. If it is, then we can go back and do
- * the same for q. If p is composite, chances are that
+ * q is possibly prime, so go ahead and really make sure
+ * that p is prime. If it is, then we can go back and do
+ * the same for q. If p is composite, chances are that
* will show up on the first Rabin-Miller iteration so it
* doesn't hurt to specify a high iteration count.
*/
}
debug("%10u: q is almost certainly prime", count_in);
- if (qfileout(out, QTYPE_SAFE, (in_tests | QTEST_MILLER_RABIN),
+ if (qfileout(out, QTYPE_SAFE, (in_tests | QTEST_MILLER_RABIN),
in_tries, in_size, generator_known, p)) {
res = -1;
break;
BN_CTX_free(ctx);
logit("%.24s Found %u safe primes of %u candidates in %ld seconds",
- ctime(&time_stop), count_out, count_possible,
+ ctime(&time_stop), count_out, count_possible,
(long) (time_stop - time_start));
return (res);
*/
#include "includes.h"
-RCSID("$OpenBSD: monitor.c,v 1.53 2003/11/18 10:53:07 djm Exp $");
+RCSID("$OpenBSD: monitor.c,v 1.54 2003/11/21 11:57:03 djm Exp $");
#include <openssl/dh.h>
Buffer m;
buffer_init(&m);
- mm_request_receive_expect(pmonitor->m_sendfd,
+ mm_request_receive_expect(pmonitor->m_sendfd,
MONITOR_REQ_PAM_ACCOUNT, &m);
authenticated = mm_answer_pam_account(pmonitor->m_sendfd, &m);
buffer_free(&m);
buffer_init(&m);
mm_request_send(pmonitor->m_recvfd, MONITOR_REQ_PAM_ACCOUNT, &m);
- mm_request_receive_expect(pmonitor->m_recvfd,
+ mm_request_receive_expect(pmonitor->m_recvfd,
MONITOR_ANS_PAM_ACCOUNT, &m);
ret = buffer_get_int(&m);
-.\" $OpenBSD: nchan.ms,v 1.7 2001/01/29 01:58:17 niklas Exp $
+.\" $OpenBSD: nchan.ms,v 1.8 2003/11/21 11:57:03 djm Exp $
+.\"
.\"
-.\"
.\" Copyright (c) 1999 Markus Friedl. All rights reserved.
-.\"
+.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
-.\"
+.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" $OpenBSD: nchan2.ms,v 1.2 2001/10/03 10:05:57 markus Exp $
-.\"
+.\" $OpenBSD: nchan2.ms,v 1.3 2003/11/21 11:57:03 djm Exp $
+.\"
.\" Copyright (c) 2000 Markus Friedl. All rights reserved.
-.\"
+.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
-.\"
+.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
if (to.ss_family == AF_INET)
return 1;
#ifdef IPV4_IN_IPV6
- if (to.ss_family == AF_INET6 &&
+ if (to.ss_family == AF_INET6 &&
IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr))
return 1;
#endif
-/* $OpenBSD: readconf.h,v 1.56 2003/10/11 08:24:08 markus Exp $ */
+/* $OpenBSD: readconf.h,v 1.57 2003/11/21 11:57:03 djm Exp $ */
/*
* Author: Tatu Ylonen <ylo@cs.hut.fi>
int connection_attempts; /* Max attempts (seconds) before
* giving up */
int connection_timeout; /* Max time (seconds) before
- * aborting connection attempt */
+ * aborting connection attempt */
int number_of_password_prompts; /* Max number of password
* prompts. */
int cipher; /* Cipher to use. */
-/* $OpenBSD: rijndael.c,v 1.14 2002/07/10 17:53:54 deraadt Exp $ */
+/* $OpenBSD: rijndael.c,v 1.15 2003/11/21 11:57:03 djm Exp $ */
/**
* rijndael-alg-fst.c
* @return the number of rounds for the given cipher key size.
*/
static int rijndaelKeySetupEnc(u32 rk[/*4*(Nr + 1)*/], const u8 cipherKey[], int keyBits) {
- int i = 0;
+ int i = 0;
u32 temp;
rk[0] = GETU32(cipherKey );
(Te4[(temp ) & 0xff] & 0x000000ff);
rk[13] = rk[ 5] ^ rk[12];
rk[14] = rk[ 6] ^ rk[13];
- rk[15] = rk[ 7] ^ rk[14];
+ rk[15] = rk[ 7] ^ rk[14];
rk += 8;
}
}
s3 = GETU32(pt + 12) ^ rk[3];
#ifdef FULL_UNROLL
/* round 1: */
- t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[ 4];
- t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[ 5];
- t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[ 6];
- t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[ 7];
- /* round 2: */
- s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[ 8];
- s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[ 9];
- s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[10];
- s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[11];
+ t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[ 4];
+ t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[ 5];
+ t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[ 6];
+ t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[ 7];
+ /* round 2: */
+ s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[ 8];
+ s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[ 9];
+ s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[10];
+ s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[11];
/* round 3: */
- t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[12];
- t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[13];
- t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[14];
- t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[15];
- /* round 4: */
- s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[16];
- s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[17];
- s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[18];
- s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[19];
+ t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[12];
+ t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[13];
+ t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[14];
+ t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[15];
+ /* round 4: */
+ s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[16];
+ s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[17];
+ s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[18];
+ s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[19];
/* round 5: */
- t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[20];
- t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[21];
- t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[22];
- t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[23];
- /* round 6: */
- s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[24];
- s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[25];
- s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[26];
- s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[27];
+ t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[20];
+ t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[21];
+ t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[22];
+ t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[23];
+ /* round 6: */
+ s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[24];
+ s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[25];
+ s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[26];
+ s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[27];
/* round 7: */
- t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[28];
- t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[29];
- t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[30];
- t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[31];
- /* round 8: */
- s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[32];
- s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[33];
- s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[34];
- s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[35];
+ t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[28];
+ t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[29];
+ t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[30];
+ t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[31];
+ /* round 8: */
+ s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[32];
+ s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >> 8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[33];
+ s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >> 8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[34];
+ s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >> 8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[35];
/* round 9: */
- t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[36];
- t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[37];
- t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[38];
- t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[39];
+ t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >> 8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[36];
+ t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >> 8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[37];
+ t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >> 8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[38];
+ t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >> 8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[39];
if (Nr > 10) {
/* round 10: */
s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >> 8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[40];
* apply last round and
* map cipher state to byte array block:
*/
- s0 =
- (Td4[(t0 >> 24) ] & 0xff000000) ^
- (Td4[(t3 >> 16) & 0xff] & 0x00ff0000) ^
- (Td4[(t2 >> 8) & 0xff] & 0x0000ff00) ^
- (Td4[(t1 ) & 0xff] & 0x000000ff) ^
- rk[0];
+ s0 =
+ (Td4[(t0 >> 24) ] & 0xff000000) ^
+ (Td4[(t3 >> 16) & 0xff] & 0x00ff0000) ^
+ (Td4[(t2 >> 8) & 0xff] & 0x0000ff00) ^
+ (Td4[(t1 ) & 0xff] & 0x000000ff) ^
+ rk[0];
PUTU32(pt , s0);
- s1 =
- (Td4[(t1 >> 24) ] & 0xff000000) ^
- (Td4[(t0 >> 16) & 0xff] & 0x00ff0000) ^
- (Td4[(t3 >> 8) & 0xff] & 0x0000ff00) ^
- (Td4[(t2 ) & 0xff] & 0x000000ff) ^
- rk[1];
+ s1 =
+ (Td4[(t1 >> 24) ] & 0xff000000) ^
+ (Td4[(t0 >> 16) & 0xff] & 0x00ff0000) ^
+ (Td4[(t3 >> 8) & 0xff] & 0x0000ff00) ^
+ (Td4[(t2 ) & 0xff] & 0x000000ff) ^
+ rk[1];
PUTU32(pt + 4, s1);
- s2 =
- (Td4[(t2 >> 24) ] & 0xff000000) ^
- (Td4[(t1 >> 16) & 0xff] & 0x00ff0000) ^
- (Td4[(t0 >> 8) & 0xff] & 0x0000ff00) ^
- (Td4[(t3 ) & 0xff] & 0x000000ff) ^
- rk[2];
+ s2 =
+ (Td4[(t2 >> 24) ] & 0xff000000) ^
+ (Td4[(t1 >> 16) & 0xff] & 0x00ff0000) ^
+ (Td4[(t0 >> 8) & 0xff] & 0x0000ff00) ^
+ (Td4[(t3 ) & 0xff] & 0x000000ff) ^
+ rk[2];
PUTU32(pt + 8, s2);
- s3 =
- (Td4[(t3 >> 24) ] & 0xff000000) ^
- (Td4[(t2 >> 16) & 0xff] & 0x00ff0000) ^
- (Td4[(t1 >> 8) & 0xff] & 0x0000ff00) ^
- (Td4[(t0 ) & 0xff] & 0x000000ff) ^
- rk[3];
+ s3 =
+ (Td4[(t3 >> 24) ] & 0xff000000) ^
+ (Td4[(t2 >> 16) & 0xff] & 0x00ff0000) ^
+ (Td4[(t1 >> 8) & 0xff] & 0x0000ff00) ^
+ (Td4[(t0 ) & 0xff] & 0x000000ff) ^
+ rk[3];
PUTU32(pt + 12, s3);
}
/*
* Copyright (c) 2002 Juha Yrjölä. All rights reserved.
* Copyright (c) 2001 Markus Friedl.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
}
}
-static int
+static int
sc_init(void)
{
int r;
goto err;
if (sc_reader_id >= ctx->reader_count) {
r = SC_ERROR_NO_READERS_FOUND;
- error("Illegal reader number %d (max %d)", sc_reader_id,
+ error("Illegal reader number %d (max %d)", sc_reader_id,
ctx->reader_count -1);
goto err;
}
goto err;
}
}
- r = sc_pkcs15_find_prkey_by_id_usage(p15card, &priv->cert_id,
+ r = sc_pkcs15_find_prkey_by_id_usage(p15card, &priv->cert_id,
usage, &key_obj);
if (r) {
error("Unable to find private key from SmartCard: %s",
r = sc_prkey_op_init(rsa, &key_obj, SC_USAGE_DECRYPT);
if (r)
return -1;
- r = sc_pkcs15_decipher(p15card, key_obj, SC_ALGORITHM_RSA_PAD_PKCS1,
+ r = sc_pkcs15_decipher(p15card, key_obj, SC_ALGORITHM_RSA_PAD_PKCS1,
from, flen, to, flen);
sc_unlock(card);
if (r < 0) {
* the key will be rejected as using a non-repudiation key
* for authentication is not recommended. Note: This does not
* prevent the use of a non-repudiation key for authentication
- * if the sign or signrecover flag is set as well.
+ * if the sign or signrecover flag is set as well.
*/
r = sc_prkey_op_init(rsa, &key_obj, SC_USAGE_SIGN);
if (r)
return;
}
-static int
+static int
sc_read_pubkey(Key * k, const struct sc_pkcs15_object *cert_obj)
{
int r;
}
x509 = X509_new();
if (x509 == NULL) {
- r = -1;
+ r = -1;
goto err;
}
p = cert->data;
*/
#include "includes.h"
-RCSID("$OpenBSD: scp.c,v 1.111 2003/11/12 10:12:15 dtucker Exp $");
+RCSID("$OpenBSD: scp.c,v 1.112 2003/11/21 11:57:03 djm Exp $");
#include "xmalloc.h"
#include "atomicio.h"
*/
#include "includes.h"
-RCSID("$OpenBSD: session.c,v 1.167 2003/11/04 08:54:09 djm Exp $");
+RCSID("$OpenBSD: session.c,v 1.168 2003/11/21 11:57:03 djm Exp $");
#include "ssh.h"
#include "ssh1.h"
#endif
#ifdef GSSAPI
- /* Allow any GSSAPI methods that we've used to alter
+ /* Allow any GSSAPI methods that we've used to alter
* the childs environment as they see fit
*/
ssh_gssapi_do_child(&env, &envsize);
path = child_get_env(env, "PATH");
# endif /* HAVE_ETC_DEFAULT_LOGIN */
if (path == NULL || *path == '\0') {
- child_set_env(&env, &envsize, "PATH",
+ child_set_env(&env, &envsize, "PATH",
s->pw->pw_uid == 0 ?
SUPERUSER_PATH : _PATH_STDPATH);
}
endgrent();
# ifdef USE_PAM
/*
- * PAM credentials may take the form of supplementary groups.
+ * PAM credentials may take the form of supplementary groups.
* These will have been wiped by the above initgroups() call.
* Reestablish them here.
*/
/* XXX: copy between two remote sites */
#include "includes.h"
-RCSID("$OpenBSD: sftp-client.c,v 1.44 2003/06/28 16:23:06 deraadt Exp $");
+RCSID("$OpenBSD: sftp-client.c,v 1.45 2003/11/21 11:57:03 djm Exp $");
#include "openbsd-compat/sys-queue.h"
return(-1);
}
- local_fd = open(local_path, O_WRONLY | O_CREAT | O_TRUNC,
+ local_fd = open(local_path, O_WRONLY | O_CREAT | O_TRUNC,
mode | S_IWRITE);
if (local_fd == -1) {
error("Couldn't open local file \"%s\" for writing: %s",
/* Override umask and utimes if asked */
#ifdef HAVE_FCHMOD
if (pflag && fchmod(local_fd, mode) == -1)
-#else
+#else
if (pflag && chmod(local_path, mode) == -1)
#endif /* HAVE_FCHMOD */
error("Couldn't set mode on \"%s\": %s", local_path,
#ifdef __GNU_LIBRARY__
/*
* Idiot glibc uses extensions to struct dirent for readdir with
- * ALTDIRFUNCs. Not that this is documented anywhere but the
+ * ALTDIRFUNCs. Not that this is documented anywhere but the
* source... Fake an inode number to appease it.
*/
ret->d_ino = inum++;
/* XXX: recursive operations */
#include "includes.h"
-RCSID("$OpenBSD: sftp-int.c,v 1.64 2003/11/08 19:17:29 jmc Exp $");
+RCSID("$OpenBSD: sftp-int.c,v 1.65 2003/11/21 11:57:03 djm Exp $");
#include "buffer.h"
#include "xmalloc.h"
}
if (cp[i] == '\\') { /* Escaped characters */
i++;
- if (cp[i] != '\'' && cp[i] != '\"' &&
+ if (cp[i] != '\'' && cp[i] != '\"' &&
cp[i] != '\\') {
error("Bad escaped character '\%c'",
cp[i]);
return (0);
fail:
- xfree(*path);
+ xfree(*path);
*path = NULL;
return (-1);
}
for (i = 0; g.gl_pathv[i]; i++) {
if (!is_reg(g.gl_pathv[i])) {
- error("skipping non-regular file %s",
+ error("skipping non-regular file %s",
g.gl_pathv[i]);
continue;
}
for (n = 0; d[n] != NULL; n++)
m = MAX(m, strlen(d[n]->filename));
- if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) != -1)
+ if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) != -1)
width = ws.ws_col;
columns = width / (m + 2);
strncmp(path, g.gl_pathv[0], strlen(g.gl_pathv[0]) - 1) == 0) {
if ((a = do_lstat(conn, path, 1)) == NULL) {
globfree(&g);
- return (-1);
+ return (-1);
}
if ((a->flags & SSH2_FILEXFER_ATTR_PERMISSIONS) &&
S_ISDIR(a->perm)) {
struct winsize ws;
/* Count entries for sort and find longest filename */
- for (i = 0; g.gl_pathv[i]; i++)
+ for (i = 0; g.gl_pathv[i]; i++)
m = MAX(m, strlen(g.gl_pathv[i]));
if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) != -1)
*/
#include "includes.h"
-RCSID("$OpenBSD: ssh-add.c,v 1.68 2003/06/16 10:22:45 markus Exp $");
+RCSID("$OpenBSD: ssh-add.c,v 1.69 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
}
}
- if (ssh_add_identity_constrained(ac, private, comment, lifetime,
- confirm)) {
+ if (ssh_add_identity_constrained(ac, private, comment, lifetime,
+ confirm)) {
fprintf(stderr, "Identity added: %s (%s)\n", filename, comment);
ret = 0;
if (lifetime != 0)
fprintf(stderr,
"Lifetime set to %d seconds\n", lifetime);
- if (confirm != 0)
+ if (confirm != 0)
fprintf(stderr,
"The user has to confirm each use of the key\n");
} else if (ssh_add_identity(ac, private, comment)) {
#include "includes.h"
#include "openbsd-compat/sys-queue.h"
-RCSID("$OpenBSD: ssh-agent.c,v 1.115 2003/10/14 19:54:39 markus Exp $");
+RCSID("$OpenBSD: ssh-agent.c,v 1.116 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
#include <openssl/md5.h>
p = read_passphrase(prompt, RP_ALLOW_EOF);
if (p != NULL) {
/*
- * Accept empty responses and responses consisting
+ * Accept empty responses and responses consisting
* of the word "yes" as affirmative.
*/
if (*p == '\0' || *p == '\n' || strcasecmp(p, "yes") == 0)
*/
#include "includes.h"
-RCSID("$OpenBSD: ssh-keygen.c,v 1.110 2003/10/14 19:42:10 jakob Exp $");
+RCSID("$OpenBSD: ssh-keygen.c,v 1.111 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
#include <openssl/pem.h>
case 'a':
trials = atoi(optarg);
if (trials < TRIAL_MINIMUM) {
- fatal("Minimum primality trials is %d",
+ fatal("Minimum primality trials is %d",
TRIAL_MINIMUM);
}
break;
case 'M':
memory = atoi(optarg);
- if (memory != 0 &&
+ if (memory != 0 &&
(memory < LARGE_MINIMUM || memory > LARGE_MAXIMUM)) {
fatal("Invalid memory amount (min %ld, max %ld)",
LARGE_MINIMUM, LARGE_MAXIMUM);
if (have_identity && strcmp(identity_file, "-") != 0) {
if ((in = fopen(identity_file, "r")) == NULL) {
fatal("Couldn't open modulus candidate "
- "file \"%s\": %s", identity_file,
+ "file \"%s\": %s", identity_file,
strerror(errno));
}
} else
.Op Fl b Ar bytes
.Sh DESCRIPTION
.Nm
-is a small helper program used by
+is a small helper program used by
.Xr ssh 1 ,
.Xr ssh-add 1 ,
.Xr ssh-agent 1 ,
.Xr ssh-keygen 1 ,
-.Xr ssh-keyscan 1
+.Xr ssh-keyscan 1
and
.Xr sshd 8
-to gather random numbers of cryptographic quality if the
+to gather random numbers of cryptographic quality if the
.Xr openssl 4
library has not been configured to provide them itself.
.Pp
-Normally
+Normally
.Nm
will generate a strong random seed and provide it to the calling
-program via standard output. If standard output is a tty,
+program via standard output. If standard output is a tty,
.Nm
will instead print the seed in hexidecimal format unless told otherwise.
.Pp
will by default gather random numbers from the system commands listed
in
.Pa /etc/ssh/ssh_prng_cmds .
-The output of each of the commands listed will be hashed and used to
-generate a random seed for the calling program.
+The output of each of the commands listed will be hashed and used to
+generate a random seed for the calling program.
.Nm
-will also store seed files in
+will also store seed files in
.Pa ~/.ssh/prng_seed
between executions.
.Pp
-Alternately,
+Alternately,
.Nm
-may be configured at build time to collect random numbers from a
+may be configured at build time to collect random numbers from a
EGD/PRNGd server via a unix domain or localhost tcp socket.
.Pp
-This program is not intended to be run by the end-user, so the few
+This program is not intended to be run by the end-user, so the few
commandline options are for debugging purposes only.
.Bl -tag -width Ds
.It Fl b Ar bytes
double stir_clock(double entropy_estimate);
double stir_rusage(int who, double entropy_estimate);
double hash_command_output(entropy_cmd_t *src, unsigned char *hash);
-int get_random_bytes_prngd(unsigned char *buf, int len,
+int get_random_bytes_prngd(unsigned char *buf, int len,
unsigned short tcp_port, char *socket_path);
/*
* Collect 'len' bytes of entropy into 'buf' from PRNGD/EGD daemon
* listening either on 'tcp_port', or via Unix domain socket at *
* 'socket_path'.
- * Either a non-zero tcp_port or a non-null socket_path must be
+ * Either a non-zero tcp_port or a non-null socket_path must be
* supplied.
* Returns 0 on success, -1 on error
*/
int
-get_random_bytes_prngd(unsigned char *buf, int len,
+get_random_bytes_prngd(unsigned char *buf, int len,
unsigned short tcp_port, char *socket_path)
{
int fd, addr_len, rval, errors;
if (devnull == -1) {
devnull = open("/dev/null", O_RDWR);
if (devnull == -1)
- fatal("Couldn't open /dev/null: %s",
+ fatal("Couldn't open /dev/null: %s",
strerror(errno));
}
execv(src->path, (char**)(src->args));
- debug("(child) Couldn't exec '%s': %s",
+ debug("(child) Couldn't exec '%s': %s",
src->cmdstring, strerror(errno));
_exit(-1);
default: /* Parent */
case -1:
default:
/* error */
- debug("Command '%s': select() failed: %s",
+ debug("Command '%s': select() failed: %s",
src->cmdstring, strerror(errno));
error_abort = 1;
break;
if (error_abort) {
/*
* Closing p[0] on timeout causes the entropy command to
- * SIGPIPE. Take whatever output we got, and mark this
- * command as slow
+ * SIGPIPE. Take whatever output we got, and mark this
+ * command as slow
*/
debug2("Command '%s' timed out", src->cmdstring);
src->sticky_badness *= 2;
/* Stir it in */
RAND_add(hash, sizeof(hash), entropy);
- debug3("Got %0.2f bytes of entropy from '%s'",
+ debug3("Got %0.2f bytes of entropy from '%s'",
entropy, entropy_cmds[c].cmdstring);
total_entropy += entropy;
total_entropy += stir_rusage(RUSAGE_CHILDREN, 0.1);
} else {
debug2("Command '%s' disabled (badness %d)",
- entropy_cmds[c].cmdstring,
+ entropy_cmds[c].cmdstring,
entropy_cmds[c].badness);
if (entropy_cmds[c].badness > 0)
struct stat st;
/*
- * XXX raceable: eg replace seed between this stat and subsequent
- * open. Not such a problem because we don't really trust the
+ * XXX raceable: eg replace seed between this stat and subsequent
+ * open. Not such a problem because we don't really trust the
* seed file anyway.
* XXX: use secure path checking as elsewhere in OpenSSH
*/
continue; /* done with this line */
/*
- * The first non-whitespace char should be a double quote
+ * The first non-whitespace char should be a double quote
* delimiting the commandline
*/
if (*cp != '"') {
/*
* If we've filled the array, reallocate it twice the size
- * Do this now because even if this we're on the last
+ * Do this now because even if this we're on the last
* command we need another slot to mark the last entry
*/
if (cur_cmd == num_cmds) {
OUTPUT_SEED_SIZE);
}
-int
+int
main(int argc, char **argv)
{
unsigned char *buf;
/*
* Seed the RNG from wherever we can
*/
-
+
/* Take whatever is on the stack, but don't credit it */
RAND_add(buf, bytes, 0);
- debug("Seeded RNG with %i bytes from system calls",
+ debug("Seeded RNG with %i bytes from system calls",
(int)stir_from_system());
#ifdef PRNGD_PORT
/* Read in collection commands */
if (prng_read_commands(SSH_PRNG_COMMAND_FILE) == -1)
fatal("PRNG initialisation failed -- exiting.");
- debug("Seeded RNG with %i bytes from programs",
+ debug("Seeded RNG with %i bytes from programs",
(int)stir_from_programs());
#endif
*/
#include "includes.h"
-RCSID("$OpenBSD: ssh.c,v 1.202 2003/10/11 08:24:08 markus Exp $");
+RCSID("$OpenBSD: ssh.c,v 1.203 2003/11/21 11:57:03 djm Exp $");
#include <openssl/evp.h>
#include <openssl/err.h>
*/
original_real_uid = getuid();
original_effective_uid = geteuid();
-
+
/*
* Use uid-swapping to give up root privileges for the duration of
* option processing. We will re-instantiate the rights when we are
packet_close();
/*
- * Send SIGHUP to proxy command if used. We don't wait() in
+ * Send SIGHUP to proxy command if used. We don't wait() in
* case it hangs and instead rely on init to reap the child
*/
if (proxy_command_pid > 1)
# Format is: "program-name args" path rate
-# The "rate" represents the number of bits of usuable entropy per
+# The "rate" represents the number of bits of usuable entropy per
# byte of command output. Be conservative.
#
# $Id$
*/
#include "includes.h"
-RCSID("$OpenBSD: sshconnect.c,v 1.153 2003/11/12 16:39:58 jakob Exp $");
+RCSID("$OpenBSD: sshconnect.c,v 1.154 2003/11/21 11:57:03 djm Exp $");
#include <openssl/bn.h>
* Build the final command string in the buffer by making the
* appropriate substitutions to the given proxy command.
*
- * Use "exec" to avoid "sh -c" processes on some platforms
+ * Use "exec" to avoid "sh -c" processes on some platforms
* (e.g. Solaris)
*/
buffer_init(&command);
break;
case -1:
/* Select error */
- debug("select: %s", strerror(errno));
+ debug("select: %s", strerror(errno));
break;
case 1:
/* Completed or failed */
optval = 0;
optlen = sizeof(optval);
- if (getsockopt(sockfd, SOL_SOCKET, SO_ERROR, &optval,
+ if (getsockopt(sockfd, SOL_SOCKET, SO_ERROR, &optval,
&optlen) == -1) {
- debug("getsockopt: %s", strerror(errno));
+ debug("getsockopt: %s", strerror(errno));
break;
}
if (optval != 0) {
*/
#include "includes.h"
-RCSID("$OpenBSD: sshconnect2.c,v 1.132 2003/11/17 11:06:07 markus Exp $");
+RCSID("$OpenBSD: sshconnect2.c,v 1.133 2003/11/21 11:57:03 djm Exp $");
#include "openbsd-compat/sys-queue.h"
}
#ifdef GSSAPI
-int
+int
userauth_gssapi(Authctxt *authctxt)
{
Gssctxt *gssctxt = NULL;
buffer_free(&b);
gss_release_buffer(&ms, &mic);
- }
+ }
}
return status;
key = ssh_get_next_identity(ac, &comment, 2)) {
found = 0;
TAILQ_FOREACH(id, &files, next) {
- /* agent keys from the config file are preferred */
+ /* agent keys from the config file are preferred */
if (key_equal(key, id->key)) {
key_free(key);
xfree(comment);
/*
* Clear out any supplemental groups we may have inherited. This
* prevents inadvertent creation of files with bad modes (in the
- * portable version at least, it's certainly possible for PAM
- * to create a file, and we can't control the code in every
+ * portable version at least, it's certainly possible for PAM
+ * to create a file, and we can't control the code in every
* module which might be used).
*/
if (setgroups(0, NULL) < 0)
packet_set_nonblocking();
- /* prepare buffers to collect authentication messages */
+ /* prepare buffers to collect authentication messages */
buffer_init(&loginmsg);
/* allocate authentication context */
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $OpenBSD: sshd_config.5,v 1.25 2003/09/01 09:50:04 markus Exp $
+.\" $OpenBSD: sshd_config.5,v 1.26 2003/11/21 11:57:03 djm Exp $
.Dd September 25, 1999
.Dt SSHD_CONFIG 5
.Os
.Dq no .
.It Cm GSSAPIAuthentication
Specifies whether user authentication based on GSSAPI is allowed.
-The default is
+The default is
.Dq no .
Note that this option applies to protocol version 2 only.
.It Cm GSSAPICleanupCredentials
.Cm UsePrivilegeSeparation
is specified, it will be disabled after authentication.
.It Cm UsePAM
-Enables PAM authentication (via challenge-response) and session set up.
-If you enable this, you should probably disable
+Enables PAM authentication (via challenge-response) and session set up.
+If you enable this, you should probably disable
.Cm PasswordAuthentication .
-If you enable
+If you enable
.CM UsePAM
then you will not be able to run sshd as a non-root user. The default is
.Dq no .
if (fd < 0)
error("open /dev/tty failed - could not set controlling tty: %.100s",
strerror(errno));
- else
+ else
close(fd);
#endif /* _UNICOS */
}
#endif
/* Try restoration of GID if changed (test clearing of saved gid) */
- if (old_gid != pw->pw_gid &&
+ if (old_gid != pw->pw_gid &&
(setgid(old_gid) != -1 || setegid(old_gid) != -1))
fatal("%s: was able to restore old [e]gid", __func__);
/* Verify GID drop was successful */
if (getgid() != pw->pw_gid || getegid() != pw->pw_gid) {
- fatal("%s: egid incorrect gid:%u egid:%u (should be %u)",
- __func__, (u_int)getgid(), (u_int)getegid(),
+ fatal("%s: egid incorrect gid:%u egid:%u (should be %u)",
+ __func__, (u_int)getgid(), (u_int)getegid(),
(u_int)pw->pw_gid);
}
#ifndef HAVE_CYGWIN
/* Try restoration of UID if changed (test clearing of saved uid) */
- if (old_uid != pw->pw_uid &&
+ if (old_uid != pw->pw_uid &&
(setuid(old_uid) != -1 || seteuid(old_uid) != -1))
fatal("%s: was able to restore old [e]uid", __func__);
#endif
/* Verify UID drop was successful */
if (getuid() != pw->pw_uid || geteuid() != pw->pw_uid) {
- fatal("%s: euid incorrect uid:%u euid:%u (should be %u)",
- __func__, (u_int)getuid(), (u_int)geteuid(),
+ fatal("%s: euid incorrect uid:%u euid:%u (should be %u)",
+ __func__, (u_int)getuid(), (u_int)geteuid(),
(u_int)pw->pw_uid);
}
}
andersk / openssh.git / commitdiff
