2 * Author: Tatu Ylonen <ylo@cs.hut.fi>
3 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5 * The main loop for the interactive session (client side).
7 * As far as I am concerned, the code I have written for this software
8 * can be used freely for any purpose. Any derived versions of this
9 * software must be clearly marked as such, and if the derived work is
10 * incompatible with the protocol description in the RFC file, it must be
11 * called by a name other than "ssh" or "Secure Shell".
14 * Copyright (c) 1999 Theo de Raadt. All rights reserved.
16 * Redistribution and use in source and binary forms, with or without
17 * modification, are permitted provided that the following conditions
19 * 1. Redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer.
21 * 2. Redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution.
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
26 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
27 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
29 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
30 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
34 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 * SSH2 support added by Markus Friedl.
38 * Copyright (c) 1999,2000 Markus Friedl. All rights reserved.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, this list of conditions and the following disclaimer.
45 * 2. Redistributions in binary form must reproduce the above copyright
46 * notice, this list of conditions and the following disclaimer in the
47 * documentation and/or other materials provided with the distribution.
49 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
50 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
51 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
52 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
53 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
54 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
55 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
56 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
57 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
58 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62 RCSID("$OpenBSD: clientloop.c,v 1.37 2000/09/26 19:59:58 markus Exp $");
78 /* Flag indicating that stdin should be redirected from /dev/null. */
79 extern int stdin_null_flag;
82 * Name of the host we are connecting to. This is the name given on the
83 * command line, or the HostName specified for the user-supplied name in a
89 * Flag to indicate that we have received a window change signal which has
90 * not yet been processed. This will cause a message indicating the new
91 * window size to be sent to the server a little later. This is volatile
92 * because this is updated in a signal handler.
94 static volatile int received_window_change_signal = 0;
96 /* Terminal modes, as saved by enter_raw_mode. */
97 static struct termios saved_tio;
100 * Flag indicating whether we are in raw mode. This is used by
101 * enter_raw_mode and leave_raw_mode.
103 static int in_raw_mode = 0;
105 /* Flag indicating whether the user\'s terminal is in non-blocking mode. */
106 static int in_non_blocking_mode = 0;
108 /* Common data for the client loop code. */
109 static int quit_pending; /* Set to non-zero to quit the client loop. */
110 static int escape_char; /* Escape character. */
111 static int escape_pending; /* Last character was the escape character */
112 static int last_was_cr; /* Last character was a newline. */
113 static int exit_status; /* Used to store the exit status of the command. */
114 static int stdin_eof; /* EOF has been encountered on standard error. */
115 static Buffer stdin_buffer; /* Buffer for stdin data. */
116 static Buffer stdout_buffer; /* Buffer for stdout data. */
117 static Buffer stderr_buffer; /* Buffer for stderr data. */
118 static unsigned long stdin_bytes, stdout_bytes, stderr_bytes;
119 static unsigned int buffer_high;/* Soft max buffer size. */
120 static int max_fd; /* Maximum file descriptor number in select(). */
121 static int connection_in; /* Connection to server (input). */
122 static int connection_out; /* Connection to server (output). */
125 void client_init_dispatch(void);
126 int session_ident = -1;
128 /* Returns the user\'s terminal to normal mode if it had been put in raw mode. */
136 if (tcsetattr(fileno(stdin), TCSADRAIN, &saved_tio) < 0)
139 fatal_remove_cleanup((void (*) (void *)) leave_raw_mode, NULL);
142 /* Puts the user\'s terminal in raw mode. */
149 if (tcgetattr(fileno(stdin), &tio) < 0)
152 tio.c_iflag |= IGNPAR;
153 tio.c_iflag &= ~(ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXANY | IXOFF);
154 tio.c_lflag &= ~(ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHONL);
156 tio.c_lflag &= ~IEXTEN;
158 tio.c_oflag &= ~OPOST;
161 if (tcsetattr(fileno(stdin), TCSADRAIN, &tio) < 0)
165 fatal_add_cleanup((void (*) (void *)) leave_raw_mode, NULL);
168 /* Restores stdin to blocking mode. */
173 if (in_non_blocking_mode) {
174 (void) fcntl(fileno(stdin), F_SETFL, 0);
175 in_non_blocking_mode = 0;
176 fatal_remove_cleanup((void (*) (void *)) leave_non_blocking, NULL);
180 /* Puts stdin terminal in non-blocking mode. */
185 in_non_blocking_mode = 1;
186 (void) fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
187 fatal_add_cleanup((void (*) (void *)) leave_non_blocking, NULL);
191 * Signal handler for the window change signal (SIGWINCH). This just sets a
192 * flag indicating that the window has changed.
196 window_change_handler(int sig)
198 received_window_change_signal = 1;
199 signal(SIGWINCH, window_change_handler);
203 * Signal handler for signals that cause the program to terminate. These
204 * signals must be trapped to restore terminal modes.
208 signal_handler(int sig)
212 if (in_non_blocking_mode)
213 leave_non_blocking();
214 channel_stop_listening();
216 fatal("Killed by signal %d.", sig);
220 * Returns current time in seconds from Jan 1, 1970 with the maximum
221 * available resolution.
228 gettimeofday(&tv, NULL);
229 return (double) tv.tv_sec + (double) tv.tv_usec / 1000000.0;
233 * This is called when the interactive is entered. This checks if there is
234 * an EOF coming on stdin. We must check this explicitly, as select() does
235 * not appear to wake up when redirecting from /dev/null.
239 client_check_initial_eof_on_stdin()
245 * If standard input is to be "redirected from /dev/null", we simply
246 * mark that we have seen an EOF and send an EOF message to the
247 * server. Otherwise, we try to read a single character; it appears
248 * that for some files, such /dev/null, select() never wakes up for
249 * read for this descriptor, which means that we never get EOF. This
250 * way we will get the EOF if stdin comes from /dev/null or similar.
252 if (stdin_null_flag) {
253 /* Fake EOF on stdin. */
254 debug("Sending eof.");
256 packet_start(SSH_CMSG_EOF);
259 enter_non_blocking();
261 /* Check for immediate EOF on stdin. */
262 len = read(fileno(stdin), buf, 1);
264 /* EOF. Record that we have seen it and send EOF to server. */
265 debug("Sending eof.");
267 packet_start(SSH_CMSG_EOF);
269 } else if (len > 0) {
271 * Got data. We must store the data in the buffer,
272 * and also process it as an escape character if
275 if ((unsigned char) buf[0] == escape_char)
278 buffer_append(&stdin_buffer, buf, 1);
282 leave_non_blocking();
288 * Make packets from buffered stdin data, and buffer them for sending to the
293 client_make_packets_from_stdin_data()
297 /* Send buffered stdin data to the server. */
298 while (buffer_len(&stdin_buffer) > 0 &&
299 packet_not_very_much_data_to_write()) {
300 len = buffer_len(&stdin_buffer);
301 /* Keep the packets at reasonable size. */
302 if (len > packet_get_maxsize())
303 len = packet_get_maxsize();
304 packet_start(SSH_CMSG_STDIN_DATA);
305 packet_put_string(buffer_ptr(&stdin_buffer), len);
307 buffer_consume(&stdin_buffer, len);
308 /* If we have a pending EOF, send it now. */
309 if (stdin_eof && buffer_len(&stdin_buffer) == 0) {
310 packet_start(SSH_CMSG_EOF);
317 * Checks if the client window has changed, and sends a packet about it to
318 * the server if so. The actual change is detected elsewhere (by a software
319 * interrupt on Unix); this just checks the flag and sends a message if
324 client_check_window_change()
328 if (! received_window_change_signal)
331 received_window_change_signal = 0;
333 if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) < 0)
336 debug2("client_check_window_change: changed");
339 channel_request_start(session_ident, "window-change", 0);
340 packet_put_int(ws.ws_col);
341 packet_put_int(ws.ws_row);
342 packet_put_int(ws.ws_xpixel);
343 packet_put_int(ws.ws_ypixel);
346 packet_start(SSH_CMSG_WINDOW_SIZE);
347 packet_put_int(ws.ws_row);
348 packet_put_int(ws.ws_col);
349 packet_put_int(ws.ws_xpixel);
350 packet_put_int(ws.ws_ypixel);
356 * Waits until the client can do something (some data becomes available on
357 * one of the file descriptors).
361 client_wait_until_can_do_something(fd_set * readset, fd_set * writeset)
363 /* Initialize select masks. */
368 /* Read from the connection, unless our buffers are full. */
369 if (buffer_len(&stdout_buffer) < buffer_high &&
370 buffer_len(&stderr_buffer) < buffer_high &&
371 channel_not_very_much_buffered_data())
372 FD_SET(connection_in, readset);
374 * Read from stdin, unless we have seen EOF or have very much
375 * buffered data to send to the server.
377 if (!stdin_eof && packet_not_very_much_data_to_write())
378 FD_SET(fileno(stdin), readset);
380 /* Select stdout/stderr if have data in buffer. */
381 if (buffer_len(&stdout_buffer) > 0)
382 FD_SET(fileno(stdout), writeset);
383 if (buffer_len(&stderr_buffer) > 0)
384 FD_SET(fileno(stderr), writeset);
386 FD_SET(connection_in, readset);
389 /* Add any selections by the channel mechanism. */
390 channel_prepare_select(readset, writeset);
392 /* Select server connection if have data to write to the server. */
393 if (packet_have_data_to_write())
394 FD_SET(connection_out, writeset);
397 /* Update maximum file descriptor number, if appropriate. */
398 if (channel_max_fd() > max_fd)
399 max_fd = channel_max_fd();
402 * Wait for something to happen. This will suspend the process until
403 * some selected descriptor can be read, written, or has some other
404 * event pending. Note: if you want to implement SSH_MSG_IGNORE
405 * messages to fool traffic analysis, this might be the place to do
406 * it: just have a random timeout for the select, and send a random
407 * SSH_MSG_IGNORE packet when the timeout expires.
410 if (select(max_fd + 1, readset, writeset, NULL, NULL) < 0) {
412 /* Some systems fail to clear these automatically. */
417 /* Note: we might still have data in the buffers. */
418 snprintf(buf, sizeof buf, "select: %s\r\n", strerror(errno));
419 buffer_append(&stderr_buffer, buf, strlen(buf));
420 stderr_bytes += strlen(buf);
426 client_suspend_self(Buffer *bin, Buffer *bout, Buffer *berr)
428 struct winsize oldws, newws;
430 /* Flush stdout and stderr buffers. */
431 if (buffer_len(bout) > 0)
432 atomicio(write, fileno(stdout), buffer_ptr(bout), buffer_len(bout));
433 if (buffer_len(berr) > 0)
434 atomicio(write, fileno(stderr), buffer_ptr(berr), buffer_len(berr));
439 * Free (and clear) the buffer to reduce the amount of data that gets
446 /* Save old window size. */
447 ioctl(fileno(stdin), TIOCGWINSZ, &oldws);
449 /* Send the suspend signal to the program itself. */
450 kill(getpid(), SIGTSTP);
452 /* Check if the window size has changed. */
453 if (ioctl(fileno(stdin), TIOCGWINSZ, &newws) >= 0 &&
454 (oldws.ws_row != newws.ws_row ||
455 oldws.ws_col != newws.ws_col ||
456 oldws.ws_xpixel != newws.ws_xpixel ||
457 oldws.ws_ypixel != newws.ws_ypixel))
458 received_window_change_signal = 1;
460 /* OK, we have been continued by the user. Reinitialize buffers. */
469 client_process_net_input(fd_set * readset)
475 * Read input from the server, and add any such data to the buffer of
476 * the packet subsystem.
478 if (FD_ISSET(connection_in, readset)) {
479 /* Read as much as possible. */
480 len = read(connection_in, buf, sizeof(buf));
482 /* Received EOF. The remote host has closed the connection. */
483 snprintf(buf, sizeof buf, "Connection to %.300s closed by remote host.\r\n",
485 buffer_append(&stderr_buffer, buf, strlen(buf));
486 stderr_bytes += strlen(buf);
491 * There is a kernel bug on Solaris that causes select to
492 * sometimes wake up even though there is no data available.
494 if (len < 0 && errno == EAGAIN)
498 /* An error has encountered. Perhaps there is a network problem. */
499 snprintf(buf, sizeof buf, "Read from remote host %.300s: %.100s\r\n",
500 host, strerror(errno));
501 buffer_append(&stderr_buffer, buf, strlen(buf));
502 stderr_bytes += strlen(buf);
506 packet_process_incoming(buf, len);
510 /* process the characters one by one */
512 process_escapes(Buffer *bin, Buffer *bout, Buffer *berr, char *buf, int len)
521 for (i = 0; i < len; i++) {
522 /* Get one character at a time. */
525 if (escape_pending) {
526 /* We have previously seen an escape character. */
527 /* Clear the flag now. */
530 /* Process the escaped character. */
533 /* Terminate the connection. */
534 snprintf(string, sizeof string, "%c.\r\n", escape_char);
535 buffer_append(berr, string, strlen(string));
536 /*stderr_bytes += strlen(string); XXX*/
542 /* Suspend the program. */
543 /* Print a message to that effect to the user. */
544 snprintf(string, sizeof string, "%c^Z [suspend ssh]\r\n", escape_char);
545 buffer_append(berr, string, strlen(string));
546 /*stderr_bytes += strlen(string); XXX*/
548 /* Restore terminal modes and suspend. */
549 client_suspend_self(bin, bout, berr);
551 /* We have been continued. */
555 /* XXX does not work yet with proto 2 */
559 * Detach the program (continue to serve connections,
560 * but put in background and no more new connections).
564 * Sending SSH_CMSG_EOF alone does not always appear
565 * to be enough. So we try to send an EOF character
568 packet_start(SSH_CMSG_STDIN_DATA);
569 packet_put_string("\004", 1);
573 if (buffer_len(bin) == 0) {
574 packet_start(SSH_CMSG_EOF);
578 /* Restore tty modes. */
581 /* Stop listening for new connections. */
582 channel_stop_listening();
584 printf("%c& [backgrounded]\n", escape_char);
586 /* Fork into background. */
589 error("fork: %.100s", strerror(errno));
592 if (pid != 0) { /* This is the parent. */
593 /* The parent just exits. */
596 /* The child continues serving connections. */
600 snprintf(string, sizeof string,
602 Supported escape sequences:\r\n\
603 ~. - terminate connection\r\n\
604 ~^Z - suspend ssh\r\n\
605 ~# - list forwarded connections\r\n\
606 ~& - background ssh (when waiting for connections to terminate)\r\n\
607 ~? - this message\r\n\
608 ~~ - send the escape character by typing it twice\r\n\
609 (Note that escapes are only recognized immediately after newline.)\r\n",
611 buffer_append(berr, string, strlen(string));
615 snprintf(string, sizeof string, "%c#\r\n", escape_char);
616 buffer_append(berr, string, strlen(string));
617 s = channel_open_message();
618 buffer_append(berr, s, strlen(s));
623 if (ch != escape_char) {
624 buffer_put_char(bin, escape_char);
627 /* Escaped characters fall through here */
632 * The previous character was not an escape char. Check if this
635 if (last_was_cr && ch == escape_char) {
636 /* It is. Set the flag and continue to next character. */
643 * Normal character. Record whether it was a newline,
644 * and append it to the buffer.
646 last_was_cr = (ch == '\r' || ch == '\n');
647 buffer_put_char(bin, ch);
654 client_process_input(fd_set * readset)
660 /* Read input from stdin. */
661 if (FD_ISSET(fileno(stdin), readset)) {
662 /* Read as much as possible. */
663 len = read(fileno(stdin), buf, sizeof(buf));
666 * Received EOF or error. They are treated
667 * similarly, except that an error message is printed
668 * if it was an error condition.
671 snprintf(buf, sizeof buf, "read: %.100s\r\n", strerror(errno));
672 buffer_append(&stderr_buffer, buf, strlen(buf));
673 stderr_bytes += strlen(buf);
675 /* Mark that we have seen EOF. */
678 * Send an EOF message to the server unless there is
679 * data in the buffer. If there is data in the
680 * buffer, no message will be sent now. Code
681 * elsewhere will send the EOF when the buffer
682 * becomes empty if stdin_eof is set.
684 if (buffer_len(&stdin_buffer) == 0) {
685 packet_start(SSH_CMSG_EOF);
688 } else if (escape_char == -1) {
690 * Normal successful read, and no escape character.
691 * Just append the data to buffer.
693 buffer_append(&stdin_buffer, buf, len);
697 * Normal, successful read. But we have an escape character
698 * and have to process the characters one by one.
700 ret = process_escapes(&stdin_buffer, &stdout_buffer, &stderr_buffer, buf, len);
709 client_process_output(fd_set * writeset)
714 /* Write buffered output to stdout. */
715 if (FD_ISSET(fileno(stdout), writeset)) {
716 /* Write as much data as possible. */
717 len = write(fileno(stdout), buffer_ptr(&stdout_buffer),
718 buffer_len(&stdout_buffer));
724 * An error or EOF was encountered. Put an
725 * error message to stderr buffer.
727 snprintf(buf, sizeof buf, "write stdout: %.50s\r\n", strerror(errno));
728 buffer_append(&stderr_buffer, buf, strlen(buf));
729 stderr_bytes += strlen(buf);
734 /* Consume printed data from the buffer. */
735 buffer_consume(&stdout_buffer, len);
737 /* Write buffered output to stderr. */
738 if (FD_ISSET(fileno(stderr), writeset)) {
739 /* Write as much data as possible. */
740 len = write(fileno(stderr), buffer_ptr(&stderr_buffer),
741 buffer_len(&stderr_buffer));
746 /* EOF or error, but can't even print error message. */
751 /* Consume printed characters from the buffer. */
752 buffer_consume(&stderr_buffer, len);
757 * Get packets from the connection input buffer, and process them as long as
758 * there are packets available.
760 * Any unknown packets received during the actual
761 * session cause the session to terminate. This is
762 * intended to make debugging easier since no
763 * confirmations are sent. Any compatible protocol
764 * extensions must be negotiated during the
769 client_process_buffered_input_packets()
771 dispatch_run(DISPATCH_NONBLOCK, &quit_pending, NULL);
774 /* scan buf[] for '~' before sending data to the peer */
777 simple_escape_filter(Channel *c, char *buf, int len)
779 /* XXX we assume c->extended is writeable */
780 return process_escapes(&c->input, &c->output, &c->extended, buf, len);
784 * Implements the interactive session with the server. This is called after
785 * the user has been authenticated, and a command has been started on the
786 * remote host. If escape_char != -1, it is the character used as an escape
787 * character for terminating or suspending the session.
791 client_loop(int have_pty, int escape_char_arg, int ssh2_chan_id)
793 extern Options options;
794 double start_time, total_time;
798 debug("Entering interactive session.");
800 start_time = get_current_time();
802 /* Initialize variables. */
807 buffer_high = 64 * 1024;
808 connection_in = packet_get_connection_in();
809 connection_out = packet_get_connection_out();
810 max_fd = connection_in;
811 if (connection_out > max_fd)
812 max_fd = connection_out;
817 escape_char = escape_char_arg;
819 /* Initialize buffers. */
820 buffer_init(&stdin_buffer);
821 buffer_init(&stdout_buffer);
822 buffer_init(&stderr_buffer);
824 client_init_dispatch();
826 /* Set signal handlers to restore non-blocking mode. */
827 signal(SIGINT, signal_handler);
828 signal(SIGQUIT, signal_handler);
829 signal(SIGTERM, signal_handler);
830 signal(SIGPIPE, SIG_IGN);
832 signal(SIGWINCH, window_change_handler);
837 /* Check if we should immediately send eof on stdin. */
839 client_check_initial_eof_on_stdin();
841 if (compat20 && escape_char != -1)
842 channel_register_filter(ssh2_chan_id, simple_escape_filter);
844 /* Main loop of the client for the interactive session mode. */
845 while (!quit_pending) {
846 fd_set readset, writeset;
848 /* Process buffered packets sent by the server. */
849 client_process_buffered_input_packets();
851 if (compat20 && !channel_still_open()) {
852 debug2("!channel_still_open.");
857 * Make packets of buffered stdin data, and buffer them for
858 * sending to the server.
861 client_make_packets_from_stdin_data();
864 * Make packets from buffered channel data, and buffer them
865 * for sending to the server.
867 if (packet_not_very_much_data_to_write())
868 channel_output_poll();
871 * Check if the window size has changed, and buffer a message
872 * about it to the server if so.
874 client_check_window_change();
880 * Wait until we have something to do (something becomes
881 * available on one of the descriptors).
883 client_wait_until_can_do_something(&readset, &writeset);
888 /* Do channel operations. */
889 channel_after_select(&readset, &writeset);
891 /* Buffer input from the connection. */
892 client_process_net_input(&readset);
898 /* Buffer data from stdin */
899 client_process_input(&readset);
901 * Process output to stdout and stderr. Output to
902 * the connection is processed elsewhere (above).
904 client_process_output(&writeset);
907 /* Send as much buffered packet data as possible to the sender. */
908 if (FD_ISSET(connection_out, &writeset))
912 /* Terminate the session. */
914 /* Stop watching for window change. */
916 signal(SIGWINCH, SIG_DFL);
918 /* Stop listening for connections. */
919 channel_stop_listening();
922 * In interactive mode (with pseudo tty) display a message indicating
923 * that the connection has been closed.
925 if (have_pty && options.log_level != SYSLOG_LEVEL_QUIET) {
926 snprintf(buf, sizeof buf, "Connection to %.64s closed.\r\n", host);
927 buffer_append(&stderr_buffer, buf, strlen(buf));
928 stderr_bytes += strlen(buf);
930 /* Output any buffered data for stdout. */
931 while (buffer_len(&stdout_buffer) > 0) {
932 len = write(fileno(stdout), buffer_ptr(&stdout_buffer),
933 buffer_len(&stdout_buffer));
935 error("Write failed flushing stdout buffer.");
938 buffer_consume(&stdout_buffer, len);
941 /* Output any buffered data for stderr. */
942 while (buffer_len(&stderr_buffer) > 0) {
943 len = write(fileno(stderr), buffer_ptr(&stderr_buffer),
944 buffer_len(&stderr_buffer));
946 error("Write failed flushing stderr buffer.");
949 buffer_consume(&stderr_buffer, len);
955 /* Clear and free any buffers. */
956 memset(buf, 0, sizeof(buf));
957 buffer_free(&stdin_buffer);
958 buffer_free(&stdout_buffer);
959 buffer_free(&stderr_buffer);
961 /* Report bytes transferred, and transfer rates. */
962 total_time = get_current_time() - start_time;
963 debug("Transferred: stdin %lu, stdout %lu, stderr %lu bytes in %.1f seconds",
964 stdin_bytes, stdout_bytes, stderr_bytes, total_time);
966 debug("Bytes per second: stdin %.1f, stdout %.1f, stderr %.1f",
967 stdin_bytes / total_time, stdout_bytes / total_time,
968 stderr_bytes / total_time);
970 /* Return the exit status of the program. */
971 debug("Exit status %d", exit_status);
978 client_input_stdout_data(int type, int plen, void *ctxt)
980 unsigned int data_len;
981 char *data = packet_get_string(&data_len);
982 packet_integrity_check(plen, 4 + data_len, type);
983 buffer_append(&stdout_buffer, data, data_len);
984 stdout_bytes += data_len;
985 memset(data, 0, data_len);
989 client_input_stderr_data(int type, int plen, void *ctxt)
991 unsigned int data_len;
992 char *data = packet_get_string(&data_len);
993 packet_integrity_check(plen, 4 + data_len, type);
994 buffer_append(&stderr_buffer, data, data_len);
995 stdout_bytes += data_len;
996 memset(data, 0, data_len);
1000 client_input_exit_status(int type, int plen, void *ctxt)
1002 packet_integrity_check(plen, 4, type);
1003 exit_status = packet_get_int();
1004 /* Acknowledge the exit. */
1005 packet_start(SSH_CMSG_EXIT_CONFIRMATION);
1008 * Must wait for packet to be sent since we are
1011 packet_write_wait();
1012 /* Flag that we want to exit. */
1016 /* XXXX move to generic input handler */
1018 client_input_channel_open(int type, int plen, void *ctxt)
1028 ctype = packet_get_string(&len);
1029 rchan = packet_get_int();
1030 rwindow = packet_get_int();
1031 rmaxpack = packet_get_int();
1033 debug("client_input_channel_open: ctype %s rchan %d win %d max %d",
1034 ctype, rchan, rwindow, rmaxpack);
1036 if (strcmp(ctype, "x11") == 0) {
1039 int originator_port;
1040 originator = packet_get_string(NULL);
1041 if (datafellows & SSH_BUG_X11FWD) {
1042 debug2("buggy server: x11 request w/o originator_port");
1043 originator_port = 0;
1045 originator_port = packet_get_int();
1048 /* XXX check permission */
1050 /* XXX move to channels.c */
1051 sock = x11_connect_display();
1053 id = channel_new("x11", SSH_CHANNEL_X11_OPEN,
1054 sock, sock, -1, CHAN_X11_WINDOW_DEFAULT,
1055 CHAN_X11_PACKET_DEFAULT, 0, xstrdup("x11"));
1056 c = channel_lookup(id);
1059 /* XXX duplicate : */
1061 debug("confirm %s", ctype);
1062 c->remote_id = rchan;
1063 c->remote_window = rwindow;
1064 c->remote_maxpacket = rmaxpack;
1066 packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
1067 packet_put_int(c->remote_id);
1068 packet_put_int(c->self);
1069 packet_put_int(c->local_window);
1070 packet_put_int(c->local_maxpacket);
1073 debug("failure %s", ctype);
1074 packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE);
1075 packet_put_int(rchan);
1076 packet_put_int(SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED);
1077 packet_put_cstring("bla bla");
1078 packet_put_cstring("");
1085 client_init_dispatch_20()
1087 dispatch_init(&dispatch_protocol_error);
1088 dispatch_set(SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose);
1089 dispatch_set(SSH2_MSG_CHANNEL_DATA, &channel_input_data);
1090 dispatch_set(SSH2_MSG_CHANNEL_EOF, &channel_input_ieof);
1091 dispatch_set(SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data);
1092 dispatch_set(SSH2_MSG_CHANNEL_OPEN, &client_input_channel_open);
1093 dispatch_set(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation);
1094 dispatch_set(SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure);
1095 dispatch_set(SSH2_MSG_CHANNEL_REQUEST, &channel_input_channel_request);
1096 dispatch_set(SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust);
1099 client_init_dispatch_13()
1101 dispatch_init(NULL);
1102 dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_close);
1103 dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, &channel_input_close_confirmation);
1104 dispatch_set(SSH_MSG_CHANNEL_DATA, &channel_input_data);
1105 dispatch_set(SSH_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation);
1106 dispatch_set(SSH_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure);
1107 dispatch_set(SSH_MSG_PORT_OPEN, &channel_input_port_open);
1108 dispatch_set(SSH_SMSG_AGENT_OPEN, &auth_input_open_request);
1109 dispatch_set(SSH_SMSG_EXITSTATUS, &client_input_exit_status);
1110 dispatch_set(SSH_SMSG_STDERR_DATA, &client_input_stderr_data);
1111 dispatch_set(SSH_SMSG_STDOUT_DATA, &client_input_stdout_data);
1112 dispatch_set(SSH_SMSG_X11_OPEN, &x11_input_open);
1115 client_init_dispatch_15()
1117 client_init_dispatch_13();
1118 dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_ieof);
1119 dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, & channel_input_oclose);
1122 client_init_dispatch()
1125 client_init_dispatch_20();
1127 client_init_dispatch_13();
1129 client_init_dispatch_15();
1133 client_input_channel_req(int id, void *arg)
1141 rtype = packet_get_string(&len);
1142 reply = packet_get_char();
1144 debug("client_input_channel_req: rtype %s reply %d", rtype, reply);
1146 c = channel_lookup(id);
1148 fatal("client_input_channel_req: channel %d: bad channel", id);
1150 if (session_ident == -1) {
1151 error("client_input_channel_req: no channel %d", id);
1152 } else if (id != session_ident) {
1153 error("client_input_channel_req: bad channel %d != %d",
1155 } else if (strcmp(rtype, "exit-status") == 0) {
1157 exit_status = packet_get_int();
1161 packet_start(success ?
1162 SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE);
1163 packet_put_int(c->remote_id);
1170 client_set_session_ident(int id)
1172 debug2("client_set_session_ident: id %d", id);
1174 channel_register_callback(id, SSH2_MSG_CHANNEL_REQUEST,
1175 client_input_channel_req, (void *)0);