]> andersk Git - openssh.git/blob - packet.c
- markus@cvs.openbsd.org 2003/06/24 08:23:46
[openssh.git] / packet.c
1 /*
2  * Author: Tatu Ylonen <ylo@cs.hut.fi>
3  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
4  *                    All rights reserved
5  * This file contains code implementing the packet protocol and communication
6  * with the other side.  This same code is used both on client and server side.
7  *
8  * As far as I am concerned, the code I have written for this software
9  * can be used freely for any purpose.  Any derived versions of this
10  * software must be clearly marked as such, and if the derived work is
11  * incompatible with the protocol description in the RFC file, it must be
12  * called by a name other than "ssh" or "Secure Shell".
13  *
14  *
15  * SSH2 packet format added by Markus Friedl.
16  * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved.
17  *
18  * Redistribution and use in source and binary forms, with or without
19  * modification, are permitted provided that the following conditions
20  * are met:
21  * 1. Redistributions of source code must retain the above copyright
22  *    notice, this list of conditions and the following disclaimer.
23  * 2. Redistributions in binary form must reproduce the above copyright
24  *    notice, this list of conditions and the following disclaimer in the
25  *    documentation and/or other materials provided with the distribution.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
29  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
30  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37  */
38
39 #include "includes.h"
40 RCSID("$OpenBSD: packet.c,v 1.108 2003/06/24 08:23:46 markus Exp $");
41
42 #include "openbsd-compat/sys-queue.h"
43
44 #include "xmalloc.h"
45 #include "buffer.h"
46 #include "packet.h"
47 #include "bufaux.h"
48 #include "crc32.h"
49 #include "getput.h"
50
51 #include "compress.h"
52 #include "deattack.h"
53 #include "channels.h"
54
55 #include "compat.h"
56 #include "ssh1.h"
57 #include "ssh2.h"
58
59 #include "cipher.h"
60 #include "kex.h"
61 #include "mac.h"
62 #include "log.h"
63 #include "canohost.h"
64 #include "misc.h"
65 #include "ssh.h"
66
67 #ifdef PACKET_DEBUG
68 #define DBG(x) x
69 #else
70 #define DBG(x)
71 #endif
72
73 /*
74  * This variable contains the file descriptors used for communicating with
75  * the other side.  connection_in is used for reading; connection_out for
76  * writing.  These can be the same descriptor, in which case it is assumed to
77  * be a socket.
78  */
79 static int connection_in = -1;
80 static int connection_out = -1;
81
82 /* Protocol flags for the remote side. */
83 static u_int remote_protocol_flags = 0;
84
85 /* Encryption context for receiving data.  This is only used for decryption. */
86 static CipherContext receive_context;
87
88 /* Encryption context for sending data.  This is only used for encryption. */
89 static CipherContext send_context;
90
91 /* Buffer for raw input data from the socket. */
92 Buffer input;
93
94 /* Buffer for raw output data going to the socket. */
95 Buffer output;
96
97 /* Buffer for the partial outgoing packet being constructed. */
98 static Buffer outgoing_packet;
99
100 /* Buffer for the incoming packet currently being processed. */
101 static Buffer incoming_packet;
102
103 /* Scratch buffer for packet compression/decompression. */
104 static Buffer compression_buffer;
105 static int compression_buffer_ready = 0;
106
107 /* Flag indicating whether packet compression/decompression is enabled. */
108 static int packet_compression = 0;
109
110 /* default maximum packet size */
111 u_int max_packet_size = 32768;
112
113 /* Flag indicating whether this module has been initialized. */
114 static int initialized = 0;
115
116 /* Set to true if the connection is interactive. */
117 static int interactive_mode = 0;
118
119 /* Session key information for Encryption and MAC */
120 Newkeys *newkeys[MODE_MAX];
121 static struct packet_state {
122         u_int32_t seqnr;
123         u_int32_t packets;
124         u_int64_t blocks;
125 } p_read, p_send;
126
127 static u_int64_t max_blocks_in, max_blocks_out;
128 static u_int32_t rekey_limit;
129
130 /* Session key for protocol v1 */
131 static u_char ssh1_key[SSH_SESSION_KEY_LENGTH];
132 static u_int ssh1_keylen;
133
134 /* roundup current message to extra_pad bytes */
135 static u_char extra_pad = 0;
136
137 struct packet {
138         TAILQ_ENTRY(packet) next;
139         u_char type;
140         Buffer payload;
141 };
142 TAILQ_HEAD(, packet) outgoing;
143
144 /*
145  * Sets the descriptors used for communication.  Disables encryption until
146  * packet_set_encryption_key is called.
147  */
148 void
149 packet_set_connection(int fd_in, int fd_out)
150 {
151         Cipher *none = cipher_by_name("none");
152
153         if (none == NULL)
154                 fatal("packet_set_connection: cannot load cipher 'none'");
155         connection_in = fd_in;
156         connection_out = fd_out;
157         cipher_init(&send_context, none, "", 0, NULL, 0, CIPHER_ENCRYPT);
158         cipher_init(&receive_context, none, "", 0, NULL, 0, CIPHER_DECRYPT);
159         newkeys[MODE_IN] = newkeys[MODE_OUT] = NULL;
160         if (!initialized) {
161                 initialized = 1;
162                 buffer_init(&input);
163                 buffer_init(&output);
164                 buffer_init(&outgoing_packet);
165                 buffer_init(&incoming_packet);
166                 TAILQ_INIT(&outgoing);
167         }
168         /* Kludge: arrange the close function to be called from fatal(). */
169         fatal_add_cleanup((void (*) (void *)) packet_close, NULL);
170 }
171
172 /* Returns 1 if remote host is connected via socket, 0 if not. */
173
174 int
175 packet_connection_is_on_socket(void)
176 {
177         struct sockaddr_storage from, to;
178         socklen_t fromlen, tolen;
179
180         /* filedescriptors in and out are the same, so it's a socket */
181         if (connection_in == connection_out)
182                 return 1;
183         fromlen = sizeof(from);
184         memset(&from, 0, sizeof(from));
185         if (getpeername(connection_in, (struct sockaddr *)&from, &fromlen) < 0)
186                 return 0;
187         tolen = sizeof(to);
188         memset(&to, 0, sizeof(to));
189         if (getpeername(connection_out, (struct sockaddr *)&to, &tolen) < 0)
190                 return 0;
191         if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0)
192                 return 0;
193         if (from.ss_family != AF_INET && from.ss_family != AF_INET6)
194                 return 0;
195         return 1;
196 }
197
198 /*
199  * Exports an IV from the CipherContext required to export the key
200  * state back from the unprivileged child to the privileged parent
201  * process.
202  */
203
204 void
205 packet_get_keyiv(int mode, u_char *iv, u_int len)
206 {
207         CipherContext *cc;
208
209         if (mode == MODE_OUT)
210                 cc = &send_context;
211         else
212                 cc = &receive_context;
213
214         cipher_get_keyiv(cc, iv, len);
215 }
216
217 int
218 packet_get_keycontext(int mode, u_char *dat)
219 {
220         CipherContext *cc;
221
222         if (mode == MODE_OUT)
223                 cc = &send_context;
224         else
225                 cc = &receive_context;
226
227         return (cipher_get_keycontext(cc, dat));
228 }
229
230 void
231 packet_set_keycontext(int mode, u_char *dat)
232 {
233         CipherContext *cc;
234
235         if (mode == MODE_OUT)
236                 cc = &send_context;
237         else
238                 cc = &receive_context;
239
240         cipher_set_keycontext(cc, dat);
241 }
242
243 int
244 packet_get_keyiv_len(int mode)
245 {
246         CipherContext *cc;
247
248         if (mode == MODE_OUT)
249                 cc = &send_context;
250         else
251                 cc = &receive_context;
252
253         return (cipher_get_keyiv_len(cc));
254 }
255 void
256 packet_set_iv(int mode, u_char *dat)
257 {
258         CipherContext *cc;
259
260         if (mode == MODE_OUT)
261                 cc = &send_context;
262         else
263                 cc = &receive_context;
264
265         cipher_set_keyiv(cc, dat);
266 }
267 int
268 packet_get_ssh1_cipher(void)
269 {
270         return (cipher_get_number(receive_context.cipher));
271 }
272
273 void
274 packet_get_state(int mode, u_int32_t *seqnr, u_int64_t *blocks, u_int32_t *packets)
275 {
276         struct packet_state *state;
277
278         state = (mode == MODE_IN) ? &p_read : &p_send;
279         *seqnr = state->seqnr;
280         *blocks = state->blocks;
281         *packets = state->packets;
282 }
283
284 void
285 packet_set_state(int mode, u_int32_t seqnr, u_int64_t blocks, u_int32_t packets)
286 {
287         struct packet_state *state;
288
289         state = (mode == MODE_IN) ? &p_read : &p_send;
290         state->seqnr = seqnr;
291         state->blocks = blocks;
292         state->packets = packets;
293 }
294
295 /* returns 1 if connection is via ipv4 */
296
297 int
298 packet_connection_is_ipv4(void)
299 {
300         struct sockaddr_storage to;
301         socklen_t tolen = sizeof(to);
302
303         memset(&to, 0, sizeof(to));
304         if (getsockname(connection_out, (struct sockaddr *)&to, &tolen) < 0)
305                 return 0;
306         if (to.ss_family == AF_INET)
307                 return 1;
308 #ifdef IPV4_IN_IPV6
309         if (to.ss_family == AF_INET6 && 
310             IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr))
311                 return 1;
312 #endif
313         return 0;
314 }
315
316 /* Sets the connection into non-blocking mode. */
317
318 void
319 packet_set_nonblocking(void)
320 {
321         /* Set the socket into non-blocking mode. */
322         if (fcntl(connection_in, F_SETFL, O_NONBLOCK) < 0)
323                 error("fcntl O_NONBLOCK: %.100s", strerror(errno));
324
325         if (connection_out != connection_in) {
326                 if (fcntl(connection_out, F_SETFL, O_NONBLOCK) < 0)
327                         error("fcntl O_NONBLOCK: %.100s", strerror(errno));
328         }
329 }
330
331 /* Returns the socket used for reading. */
332
333 int
334 packet_get_connection_in(void)
335 {
336         return connection_in;
337 }
338
339 /* Returns the descriptor used for writing. */
340
341 int
342 packet_get_connection_out(void)
343 {
344         return connection_out;
345 }
346
347 /* Closes the connection and clears and frees internal data structures. */
348
349 void
350 packet_close(void)
351 {
352         if (!initialized)
353                 return;
354         initialized = 0;
355         if (connection_in == connection_out) {
356                 shutdown(connection_out, SHUT_RDWR);
357                 close(connection_out);
358         } else {
359                 close(connection_in);
360                 close(connection_out);
361         }
362         buffer_free(&input);
363         buffer_free(&output);
364         buffer_free(&outgoing_packet);
365         buffer_free(&incoming_packet);
366         if (compression_buffer_ready) {
367                 buffer_free(&compression_buffer);
368                 buffer_compress_uninit();
369         }
370         cipher_cleanup(&send_context);
371         cipher_cleanup(&receive_context);
372 }
373
374 /* Sets remote side protocol flags. */
375
376 void
377 packet_set_protocol_flags(u_int protocol_flags)
378 {
379         remote_protocol_flags = protocol_flags;
380 }
381
382 /* Returns the remote protocol flags set earlier by the above function. */
383
384 u_int
385 packet_get_protocol_flags(void)
386 {
387         return remote_protocol_flags;
388 }
389
390 /*
391  * Starts packet compression from the next packet on in both directions.
392  * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
393  */
394
395 static void
396 packet_init_compression(void)
397 {
398         if (compression_buffer_ready == 1)
399                 return;
400         compression_buffer_ready = 1;
401         buffer_init(&compression_buffer);
402 }
403
404 void
405 packet_start_compression(int level)
406 {
407         if (packet_compression && !compat20)
408                 fatal("Compression already enabled.");
409         packet_compression = 1;
410         packet_init_compression();
411         buffer_compress_init_send(level);
412         buffer_compress_init_recv();
413 }
414
415 /*
416  * Causes any further packets to be encrypted using the given key.  The same
417  * key is used for both sending and reception.  However, both directions are
418  * encrypted independently of each other.
419  */
420
421 void
422 packet_set_encryption_key(const u_char *key, u_int keylen,
423     int number)
424 {
425         Cipher *cipher = cipher_by_number(number);
426
427         if (cipher == NULL)
428                 fatal("packet_set_encryption_key: unknown cipher number %d", number);
429         if (keylen < 20)
430                 fatal("packet_set_encryption_key: keylen too small: %d", keylen);
431         if (keylen > SSH_SESSION_KEY_LENGTH)
432                 fatal("packet_set_encryption_key: keylen too big: %d", keylen);
433         memcpy(ssh1_key, key, keylen);
434         ssh1_keylen = keylen;
435         cipher_init(&send_context, cipher, key, keylen, NULL, 0, CIPHER_ENCRYPT);
436         cipher_init(&receive_context, cipher, key, keylen, NULL, 0, CIPHER_DECRYPT);
437 }
438
439 u_int
440 packet_get_encryption_key(u_char *key)
441 {
442         if (key == NULL)
443                 return (ssh1_keylen);
444         memcpy(key, ssh1_key, ssh1_keylen);
445         return (ssh1_keylen);
446 }
447
448 /* Start constructing a packet to send. */
449 void
450 packet_start(u_char type)
451 {
452         u_char buf[9];
453         int len;
454
455         DBG(debug("packet_start[%d]", type));
456         len = compat20 ? 6 : 9;
457         memset(buf, 0, len - 1);
458         buf[len - 1] = type;
459         buffer_clear(&outgoing_packet);
460         buffer_append(&outgoing_packet, buf, len);
461 }
462
463 /* Append payload. */
464 void
465 packet_put_char(int value)
466 {
467         char ch = value;
468
469         buffer_append(&outgoing_packet, &ch, 1);
470 }
471 void
472 packet_put_int(u_int value)
473 {
474         buffer_put_int(&outgoing_packet, value);
475 }
476 void
477 packet_put_string(const void *buf, u_int len)
478 {
479         buffer_put_string(&outgoing_packet, buf, len);
480 }
481 void
482 packet_put_cstring(const char *str)
483 {
484         buffer_put_cstring(&outgoing_packet, str);
485 }
486 void
487 packet_put_raw(const void *buf, u_int len)
488 {
489         buffer_append(&outgoing_packet, buf, len);
490 }
491 void
492 packet_put_bignum(BIGNUM * value)
493 {
494         buffer_put_bignum(&outgoing_packet, value);
495 }
496 void
497 packet_put_bignum2(BIGNUM * value)
498 {
499         buffer_put_bignum2(&outgoing_packet, value);
500 }
501
502 /*
503  * Finalizes and sends the packet.  If the encryption key has been set,
504  * encrypts the packet before sending.
505  */
506
507 static void
508 packet_send1(void)
509 {
510         u_char buf[8], *cp;
511         int i, padding, len;
512         u_int checksum;
513         u_int32_t rand = 0;
514
515         /*
516          * If using packet compression, compress the payload of the outgoing
517          * packet.
518          */
519         if (packet_compression) {
520                 buffer_clear(&compression_buffer);
521                 /* Skip padding. */
522                 buffer_consume(&outgoing_packet, 8);
523                 /* padding */
524                 buffer_append(&compression_buffer, "\0\0\0\0\0\0\0\0", 8);
525                 buffer_compress(&outgoing_packet, &compression_buffer);
526                 buffer_clear(&outgoing_packet);
527                 buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
528                     buffer_len(&compression_buffer));
529         }
530         /* Compute packet length without padding (add checksum, remove padding). */
531         len = buffer_len(&outgoing_packet) + 4 - 8;
532
533         /* Insert padding. Initialized to zero in packet_start1() */
534         padding = 8 - len % 8;
535         if (!send_context.plaintext) {
536                 cp = buffer_ptr(&outgoing_packet);
537                 for (i = 0; i < padding; i++) {
538                         if (i % 4 == 0)
539                                 rand = arc4random();
540                         cp[7 - i] = rand & 0xff;
541                         rand >>= 8;
542                 }
543         }
544         buffer_consume(&outgoing_packet, 8 - padding);
545
546         /* Add check bytes. */
547         checksum = ssh_crc32(buffer_ptr(&outgoing_packet),
548             buffer_len(&outgoing_packet));
549         PUT_32BIT(buf, checksum);
550         buffer_append(&outgoing_packet, buf, 4);
551
552 #ifdef PACKET_DEBUG
553         fprintf(stderr, "packet_send plain: ");
554         buffer_dump(&outgoing_packet);
555 #endif
556
557         /* Append to output. */
558         PUT_32BIT(buf, len);
559         buffer_append(&output, buf, 4);
560         cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
561         cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
562             buffer_len(&outgoing_packet));
563
564 #ifdef PACKET_DEBUG
565         fprintf(stderr, "encrypted: ");
566         buffer_dump(&output);
567 #endif
568
569         buffer_clear(&outgoing_packet);
570
571         /*
572          * Note that the packet is now only buffered in output.  It won\'t be
573          * actually sent until packet_write_wait or packet_write_poll is
574          * called.
575          */
576 }
577
578 void
579 set_newkeys(int mode)
580 {
581         Enc *enc;
582         Mac *mac;
583         Comp *comp;
584         CipherContext *cc;
585         u_int64_t *max_blocks;
586         int encrypt;
587
588         debug2("set_newkeys: mode %d", mode);
589
590         if (mode == MODE_OUT) {
591                 cc = &send_context;
592                 encrypt = CIPHER_ENCRYPT;
593                 p_send.packets = p_send.blocks = 0;
594                 max_blocks = &max_blocks_out;
595         } else {
596                 cc = &receive_context;
597                 encrypt = CIPHER_DECRYPT;
598                 p_read.packets = p_read.blocks = 0;
599                 max_blocks = &max_blocks_in;
600         }
601         if (newkeys[mode] != NULL) {
602                 debug("set_newkeys: rekeying");
603                 cipher_cleanup(cc);
604                 enc  = &newkeys[mode]->enc;
605                 mac  = &newkeys[mode]->mac;
606                 comp = &newkeys[mode]->comp;
607                 memset(mac->key, 0, mac->key_len);
608                 xfree(enc->name);
609                 xfree(enc->iv);
610                 xfree(enc->key);
611                 xfree(mac->name);
612                 xfree(mac->key);
613                 xfree(comp->name);
614                 xfree(newkeys[mode]);
615         }
616         newkeys[mode] = kex_get_newkeys(mode);
617         if (newkeys[mode] == NULL)
618                 fatal("newkeys: no keys for mode %d", mode);
619         enc  = &newkeys[mode]->enc;
620         mac  = &newkeys[mode]->mac;
621         comp = &newkeys[mode]->comp;
622         if (mac->md != NULL)
623                 mac->enabled = 1;
624         DBG(debug("cipher_init_context: %d", mode));
625         cipher_init(cc, enc->cipher, enc->key, enc->key_len,
626             enc->iv, enc->block_size, encrypt);
627         /* Deleting the keys does not gain extra security */
628         /* memset(enc->iv,  0, enc->block_size);
629            memset(enc->key, 0, enc->key_len); */
630         if (comp->type != 0 && comp->enabled == 0) {
631                 packet_init_compression();
632                 if (mode == MODE_OUT)
633                         buffer_compress_init_send(6);
634                 else
635                         buffer_compress_init_recv();
636                 comp->enabled = 1;
637         }
638         *max_blocks = ((u_int64_t)1 << (enc->block_size*2));
639         if (rekey_limit)
640                 *max_blocks = MIN(*max_blocks, rekey_limit / enc->block_size);
641 }
642
643 /*
644  * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
645  */
646 static void
647 packet_send2_wrapped(void)
648 {
649         u_char type, *cp, *macbuf = NULL;
650         u_char padlen, pad;
651         u_int packet_length = 0;
652         u_int i, len;
653         u_int32_t rand = 0;
654         Enc *enc   = NULL;
655         Mac *mac   = NULL;
656         Comp *comp = NULL;
657         int block_size;
658
659         if (newkeys[MODE_OUT] != NULL) {
660                 enc  = &newkeys[MODE_OUT]->enc;
661                 mac  = &newkeys[MODE_OUT]->mac;
662                 comp = &newkeys[MODE_OUT]->comp;
663         }
664         block_size = enc ? enc->block_size : 8;
665
666         cp = buffer_ptr(&outgoing_packet);
667         type = cp[5];
668
669 #ifdef PACKET_DEBUG
670         fprintf(stderr, "plain:     ");
671         buffer_dump(&outgoing_packet);
672 #endif
673
674         if (comp && comp->enabled) {
675                 len = buffer_len(&outgoing_packet);
676                 /* skip header, compress only payload */
677                 buffer_consume(&outgoing_packet, 5);
678                 buffer_clear(&compression_buffer);
679                 buffer_compress(&outgoing_packet, &compression_buffer);
680                 buffer_clear(&outgoing_packet);
681                 buffer_append(&outgoing_packet, "\0\0\0\0\0", 5);
682                 buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
683                     buffer_len(&compression_buffer));
684                 DBG(debug("compression: raw %d compressed %d", len,
685                     buffer_len(&outgoing_packet)));
686         }
687
688         /* sizeof (packet_len + pad_len + payload) */
689         len = buffer_len(&outgoing_packet);
690
691         /*
692          * calc size of padding, alloc space, get random data,
693          * minimum padding is 4 bytes
694          */
695         padlen = block_size - (len % block_size);
696         if (padlen < 4)
697                 padlen += block_size;
698         if (extra_pad) {
699                 /* will wrap if extra_pad+padlen > 255 */
700                 extra_pad  = roundup(extra_pad, block_size);
701                 pad = extra_pad - ((len + padlen) % extra_pad);
702                 debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)",
703                     pad, len, padlen, extra_pad);
704                 padlen += pad;
705                 extra_pad = 0;
706         }
707         cp = buffer_append_space(&outgoing_packet, padlen);
708         if (enc && !send_context.plaintext) {
709                 /* random padding */
710                 for (i = 0; i < padlen; i++) {
711                         if (i % 4 == 0)
712                                 rand = arc4random();
713                         cp[i] = rand & 0xff;
714                         rand >>= 8;
715                 }
716         } else {
717                 /* clear padding */
718                 memset(cp, 0, padlen);
719         }
720         /* packet_length includes payload, padding and padding length field */
721         packet_length = buffer_len(&outgoing_packet) - 4;
722         cp = buffer_ptr(&outgoing_packet);
723         PUT_32BIT(cp, packet_length);
724         cp[4] = padlen;
725         DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen));
726
727         /* compute MAC over seqnr and packet(length fields, payload, padding) */
728         if (mac && mac->enabled) {
729                 macbuf = mac_compute(mac, p_send.seqnr,
730                     buffer_ptr(&outgoing_packet),
731                     buffer_len(&outgoing_packet));
732                 DBG(debug("done calc MAC out #%d", p_send.seqnr));
733         }
734         /* encrypt packet and append to output buffer. */
735         cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
736         cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
737             buffer_len(&outgoing_packet));
738         /* append unencrypted MAC */
739         if (mac && mac->enabled)
740                 buffer_append(&output, (char *)macbuf, mac->mac_len);
741 #ifdef PACKET_DEBUG
742         fprintf(stderr, "encrypted: ");
743         buffer_dump(&output);
744 #endif
745         /* increment sequence number for outgoing packets */
746         if (++p_send.seqnr == 0)
747                 logit("outgoing seqnr wraps around");
748         if (++p_send.packets == 0)
749                 if (!(datafellows & SSH_BUG_NOREKEY))
750                         fatal("XXX too many packets with same key");
751         p_send.blocks += (packet_length + 4) / block_size;
752         buffer_clear(&outgoing_packet);
753
754         if (type == SSH2_MSG_NEWKEYS)
755                 set_newkeys(MODE_OUT);
756 }
757
758 static void
759 packet_send2(void)
760 {
761         static int rekeying = 0;
762         struct packet *p;
763         u_char type, *cp;
764
765         cp = buffer_ptr(&outgoing_packet);
766         type = cp[5];
767
768         /* during rekeying we can only send key exchange messages */
769         if (rekeying) {
770                 if (!((type >= SSH2_MSG_TRANSPORT_MIN) &&
771                     (type <= SSH2_MSG_TRANSPORT_MAX))) {
772                         debug("enqueue packet: %u", type);
773                         p = xmalloc(sizeof(*p));
774                         p->type = type;
775                         memcpy(&p->payload, &outgoing_packet, sizeof(Buffer));
776                         buffer_init(&outgoing_packet);
777                         TAILQ_INSERT_TAIL(&outgoing, p, next);
778                         return;
779                 }
780         }
781
782         /* rekeying starts with sending KEXINIT */
783         if (type == SSH2_MSG_KEXINIT)
784                 rekeying = 1;
785
786         packet_send2_wrapped();
787
788         /* after a NEWKEYS message we can send the complete queue */
789         if (type == SSH2_MSG_NEWKEYS) {
790                 rekeying = 0;
791                 while ((p = TAILQ_FIRST(&outgoing))) {
792                         type = p->type;
793                         debug("dequeue packet: %u", type);
794                         buffer_free(&outgoing_packet);
795                         memcpy(&outgoing_packet, &p->payload,
796                             sizeof(Buffer));
797                         TAILQ_REMOVE(&outgoing, p, next);
798                         xfree(p);
799                         packet_send2_wrapped();
800                 }
801         }
802 }
803
804 void
805 packet_send(void)
806 {
807         if (compat20)
808                 packet_send2();
809         else
810                 packet_send1();
811         DBG(debug("packet_send done"));
812 }
813
814 /*
815  * Waits until a packet has been received, and returns its type.  Note that
816  * no other data is processed until this returns, so this function should not
817  * be used during the interactive session.
818  */
819
820 int
821 packet_read_seqnr(u_int32_t *seqnr_p)
822 {
823         int type, len;
824         fd_set *setp;
825         char buf[8192];
826         DBG(debug("packet_read()"));
827
828         setp = (fd_set *)xmalloc(howmany(connection_in+1, NFDBITS) *
829             sizeof(fd_mask));
830
831         /* Since we are blocking, ensure that all written packets have been sent. */
832         packet_write_wait();
833
834         /* Stay in the loop until we have received a complete packet. */
835         for (;;) {
836                 /* Try to read a packet from the buffer. */
837                 type = packet_read_poll_seqnr(seqnr_p);
838                 if (!compat20 && (
839                     type == SSH_SMSG_SUCCESS
840                     || type == SSH_SMSG_FAILURE
841                     || type == SSH_CMSG_EOF
842                     || type == SSH_CMSG_EXIT_CONFIRMATION))
843                         packet_check_eom();
844                 /* If we got a packet, return it. */
845                 if (type != SSH_MSG_NONE) {
846                         xfree(setp);
847                         return type;
848                 }
849                 /*
850                  * Otherwise, wait for some data to arrive, add it to the
851                  * buffer, and try again.
852                  */
853                 memset(setp, 0, howmany(connection_in + 1, NFDBITS) *
854                     sizeof(fd_mask));
855                 FD_SET(connection_in, setp);
856
857                 /* Wait for some data to arrive. */
858                 while (select(connection_in + 1, setp, NULL, NULL, NULL) == -1 &&
859                     (errno == EAGAIN || errno == EINTR))
860                         ;
861
862                 /* Read data from the socket. */
863                 len = read(connection_in, buf, sizeof(buf));
864                 if (len == 0) {
865                         logit("Connection closed by %.200s", get_remote_ipaddr());
866                         fatal_cleanup();
867                 }
868                 if (len < 0)
869                         fatal("Read from socket failed: %.100s", strerror(errno));
870                 /* Append it to the buffer. */
871                 packet_process_incoming(buf, len);
872         }
873         /* NOTREACHED */
874 }
875
876 int
877 packet_read(void)
878 {
879         return packet_read_seqnr(NULL);
880 }
881
882 /*
883  * Waits until a packet has been received, verifies that its type matches
884  * that given, and gives a fatal error and exits if there is a mismatch.
885  */
886
887 void
888 packet_read_expect(int expected_type)
889 {
890         int type;
891
892         type = packet_read();
893         if (type != expected_type)
894                 packet_disconnect("Protocol error: expected packet type %d, got %d",
895                     expected_type, type);
896 }
897
898 /* Checks if a full packet is available in the data received so far via
899  * packet_process_incoming.  If so, reads the packet; otherwise returns
900  * SSH_MSG_NONE.  This does not wait for data from the connection.
901  *
902  * SSH_MSG_DISCONNECT is handled specially here.  Also,
903  * SSH_MSG_IGNORE messages are skipped by this function and are never returned
904  * to higher levels.
905  */
906
907 static int
908 packet_read_poll1(void)
909 {
910         u_int len, padded_len;
911         u_char *cp, type;
912         u_int checksum, stored_checksum;
913
914         /* Check if input size is less than minimum packet size. */
915         if (buffer_len(&input) < 4 + 8)
916                 return SSH_MSG_NONE;
917         /* Get length of incoming packet. */
918         cp = buffer_ptr(&input);
919         len = GET_32BIT(cp);
920         if (len < 1 + 2 + 2 || len > 256 * 1024)
921                 packet_disconnect("Bad packet length %u.", len);
922         padded_len = (len + 8) & ~7;
923
924         /* Check if the packet has been entirely received. */
925         if (buffer_len(&input) < 4 + padded_len)
926                 return SSH_MSG_NONE;
927
928         /* The entire packet is in buffer. */
929
930         /* Consume packet length. */
931         buffer_consume(&input, 4);
932
933         /*
934          * Cryptographic attack detector for ssh
935          * (C)1998 CORE-SDI, Buenos Aires Argentina
936          * Ariel Futoransky(futo@core-sdi.com)
937          */
938         if (!receive_context.plaintext &&
939             detect_attack(buffer_ptr(&input), padded_len, NULL) == DEATTACK_DETECTED)
940                 packet_disconnect("crc32 compensation attack: network attack detected");
941
942         /* Decrypt data to incoming_packet. */
943         buffer_clear(&incoming_packet);
944         cp = buffer_append_space(&incoming_packet, padded_len);
945         cipher_crypt(&receive_context, cp, buffer_ptr(&input), padded_len);
946
947         buffer_consume(&input, padded_len);
948
949 #ifdef PACKET_DEBUG
950         fprintf(stderr, "read_poll plain: ");
951         buffer_dump(&incoming_packet);
952 #endif
953
954         /* Compute packet checksum. */
955         checksum = ssh_crc32(buffer_ptr(&incoming_packet),
956             buffer_len(&incoming_packet) - 4);
957
958         /* Skip padding. */
959         buffer_consume(&incoming_packet, 8 - len % 8);
960
961         /* Test check bytes. */
962         if (len != buffer_len(&incoming_packet))
963                 packet_disconnect("packet_read_poll1: len %d != buffer_len %d.",
964                     len, buffer_len(&incoming_packet));
965
966         cp = (u_char *)buffer_ptr(&incoming_packet) + len - 4;
967         stored_checksum = GET_32BIT(cp);
968         if (checksum != stored_checksum)
969                 packet_disconnect("Corrupted check bytes on input.");
970         buffer_consume_end(&incoming_packet, 4);
971
972         if (packet_compression) {
973                 buffer_clear(&compression_buffer);
974                 buffer_uncompress(&incoming_packet, &compression_buffer);
975                 buffer_clear(&incoming_packet);
976                 buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
977                     buffer_len(&compression_buffer));
978         }
979         type = buffer_get_char(&incoming_packet);
980         return type;
981 }
982
983 static int
984 packet_read_poll2(u_int32_t *seqnr_p)
985 {
986         static u_int packet_length = 0;
987         u_int padlen, need;
988         u_char *macbuf, *cp, type;
989         int maclen, block_size;
990         Enc *enc   = NULL;
991         Mac *mac   = NULL;
992         Comp *comp = NULL;
993
994         if (newkeys[MODE_IN] != NULL) {
995                 enc  = &newkeys[MODE_IN]->enc;
996                 mac  = &newkeys[MODE_IN]->mac;
997                 comp = &newkeys[MODE_IN]->comp;
998         }
999         maclen = mac && mac->enabled ? mac->mac_len : 0;
1000         block_size = enc ? enc->block_size : 8;
1001
1002         if (packet_length == 0) {
1003                 /*
1004                  * check if input size is less than the cipher block size,
1005                  * decrypt first block and extract length of incoming packet
1006                  */
1007                 if (buffer_len(&input) < block_size)
1008                         return SSH_MSG_NONE;
1009                 buffer_clear(&incoming_packet);
1010                 cp = buffer_append_space(&incoming_packet, block_size);
1011                 cipher_crypt(&receive_context, cp, buffer_ptr(&input),
1012                     block_size);
1013                 cp = buffer_ptr(&incoming_packet);
1014                 packet_length = GET_32BIT(cp);
1015                 if (packet_length < 1 + 4 || packet_length > 256 * 1024) {
1016                         buffer_dump(&incoming_packet);
1017                         packet_disconnect("Bad packet length %u.", packet_length);
1018                 }
1019                 DBG(debug("input: packet len %u", packet_length+4));
1020                 buffer_consume(&input, block_size);
1021         }
1022         /* we have a partial packet of block_size bytes */
1023         need = 4 + packet_length - block_size;
1024         DBG(debug("partial packet %d, need %d, maclen %d", block_size,
1025             need, maclen));
1026         if (need % block_size != 0)
1027                 fatal("padding error: need %d block %d mod %d",
1028                     need, block_size, need % block_size);
1029         /*
1030          * check if the entire packet has been received and
1031          * decrypt into incoming_packet
1032          */
1033         if (buffer_len(&input) < need + maclen)
1034                 return SSH_MSG_NONE;
1035 #ifdef PACKET_DEBUG
1036         fprintf(stderr, "read_poll enc/full: ");
1037         buffer_dump(&input);
1038 #endif
1039         cp = buffer_append_space(&incoming_packet, need);
1040         cipher_crypt(&receive_context, cp, buffer_ptr(&input), need);
1041         buffer_consume(&input, need);
1042         /*
1043          * compute MAC over seqnr and packet,
1044          * increment sequence number for incoming packet
1045          */
1046         if (mac && mac->enabled) {
1047                 macbuf = mac_compute(mac, p_read.seqnr,
1048                     buffer_ptr(&incoming_packet),
1049                     buffer_len(&incoming_packet));
1050                 if (memcmp(macbuf, buffer_ptr(&input), mac->mac_len) != 0)
1051                         packet_disconnect("Corrupted MAC on input.");
1052                 DBG(debug("MAC #%d ok", p_read.seqnr));
1053                 buffer_consume(&input, mac->mac_len);
1054         }
1055         if (seqnr_p != NULL)
1056                 *seqnr_p = p_read.seqnr;
1057         if (++p_read.seqnr == 0)
1058                 logit("incoming seqnr wraps around");
1059         if (++p_read.packets == 0)
1060                 if (!(datafellows & SSH_BUG_NOREKEY))
1061                         fatal("XXX too many packets with same key");
1062         p_read.blocks += (packet_length + 4) / block_size;
1063
1064         /* get padlen */
1065         cp = buffer_ptr(&incoming_packet);
1066         padlen = cp[4];
1067         DBG(debug("input: padlen %d", padlen));
1068         if (padlen < 4)
1069                 packet_disconnect("Corrupted padlen %d on input.", padlen);
1070
1071         /* skip packet size + padlen, discard padding */
1072         buffer_consume(&incoming_packet, 4 + 1);
1073         buffer_consume_end(&incoming_packet, padlen);
1074
1075         DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet)));
1076         if (comp && comp->enabled) {
1077                 buffer_clear(&compression_buffer);
1078                 buffer_uncompress(&incoming_packet, &compression_buffer);
1079                 buffer_clear(&incoming_packet);
1080                 buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
1081                     buffer_len(&compression_buffer));
1082                 DBG(debug("input: len after de-compress %d",
1083                     buffer_len(&incoming_packet)));
1084         }
1085         /*
1086          * get packet type, implies consume.
1087          * return length of payload (without type field)
1088          */
1089         type = buffer_get_char(&incoming_packet);
1090         if (type == SSH2_MSG_NEWKEYS)
1091                 set_newkeys(MODE_IN);
1092 #ifdef PACKET_DEBUG
1093         fprintf(stderr, "read/plain[%d]:\r\n", type);
1094         buffer_dump(&incoming_packet);
1095 #endif
1096         /* reset for next packet */
1097         packet_length = 0;
1098         return type;
1099 }
1100
1101 int
1102 packet_read_poll_seqnr(u_int32_t *seqnr_p)
1103 {
1104         u_int reason, seqnr;
1105         u_char type;
1106         char *msg;
1107
1108         for (;;) {
1109                 if (compat20) {
1110                         type = packet_read_poll2(seqnr_p);
1111                         if (type)
1112                                 DBG(debug("received packet type %d", type));
1113                         switch (type) {
1114                         case SSH2_MSG_IGNORE:
1115                                 break;
1116                         case SSH2_MSG_DEBUG:
1117                                 packet_get_char();
1118                                 msg = packet_get_string(NULL);
1119                                 debug("Remote: %.900s", msg);
1120                                 xfree(msg);
1121                                 msg = packet_get_string(NULL);
1122                                 xfree(msg);
1123                                 break;
1124                         case SSH2_MSG_DISCONNECT:
1125                                 reason = packet_get_int();
1126                                 msg = packet_get_string(NULL);
1127                                 logit("Received disconnect from %s: %u: %.400s",
1128                                     get_remote_ipaddr(), reason, msg);
1129                                 xfree(msg);
1130                                 fatal_cleanup();
1131                                 break;
1132                         case SSH2_MSG_UNIMPLEMENTED:
1133                                 seqnr = packet_get_int();
1134                                 debug("Received SSH2_MSG_UNIMPLEMENTED for %u",
1135                                     seqnr);
1136                                 break;
1137                         default:
1138                                 return type;
1139                                 break;
1140                         }
1141                 } else {
1142                         type = packet_read_poll1();
1143                         switch (type) {
1144                         case SSH_MSG_IGNORE:
1145                                 break;
1146                         case SSH_MSG_DEBUG:
1147                                 msg = packet_get_string(NULL);
1148                                 debug("Remote: %.900s", msg);
1149                                 xfree(msg);
1150                                 break;
1151                         case SSH_MSG_DISCONNECT:
1152                                 msg = packet_get_string(NULL);
1153                                 logit("Received disconnect from %s: %.400s",
1154                                     get_remote_ipaddr(), msg);
1155                                 fatal_cleanup();
1156                                 xfree(msg);
1157                                 break;
1158                         default:
1159                                 if (type)
1160                                         DBG(debug("received packet type %d", type));
1161                                 return type;
1162                                 break;
1163                         }
1164                 }
1165         }
1166 }
1167
1168 int
1169 packet_read_poll(void)
1170 {
1171         return packet_read_poll_seqnr(NULL);
1172 }
1173
1174 /*
1175  * Buffers the given amount of input characters.  This is intended to be used
1176  * together with packet_read_poll.
1177  */
1178
1179 void
1180 packet_process_incoming(const char *buf, u_int len)
1181 {
1182         buffer_append(&input, buf, len);
1183 }
1184
1185 /* Returns a character from the packet. */
1186
1187 u_int
1188 packet_get_char(void)
1189 {
1190         char ch;
1191
1192         buffer_get(&incoming_packet, &ch, 1);
1193         return (u_char) ch;
1194 }
1195
1196 /* Returns an integer from the packet data. */
1197
1198 u_int
1199 packet_get_int(void)
1200 {
1201         return buffer_get_int(&incoming_packet);
1202 }
1203
1204 /*
1205  * Returns an arbitrary precision integer from the packet data.  The integer
1206  * must have been initialized before this call.
1207  */
1208
1209 void
1210 packet_get_bignum(BIGNUM * value)
1211 {
1212         buffer_get_bignum(&incoming_packet, value);
1213 }
1214
1215 void
1216 packet_get_bignum2(BIGNUM * value)
1217 {
1218         buffer_get_bignum2(&incoming_packet, value);
1219 }
1220
1221 void *
1222 packet_get_raw(int *length_ptr)
1223 {
1224         int bytes = buffer_len(&incoming_packet);
1225
1226         if (length_ptr != NULL)
1227                 *length_ptr = bytes;
1228         return buffer_ptr(&incoming_packet);
1229 }
1230
1231 int
1232 packet_remaining(void)
1233 {
1234         return buffer_len(&incoming_packet);
1235 }
1236
1237 /*
1238  * Returns a string from the packet data.  The string is allocated using
1239  * xmalloc; it is the responsibility of the calling program to free it when
1240  * no longer needed.  The length_ptr argument may be NULL, or point to an
1241  * integer into which the length of the string is stored.
1242  */
1243
1244 void *
1245 packet_get_string(u_int *length_ptr)
1246 {
1247         return buffer_get_string(&incoming_packet, length_ptr);
1248 }
1249
1250 /*
1251  * Sends a diagnostic message from the server to the client.  This message
1252  * can be sent at any time (but not while constructing another message). The
1253  * message is printed immediately, but only if the client is being executed
1254  * in verbose mode.  These messages are primarily intended to ease debugging
1255  * authentication problems.   The length of the formatted message must not
1256  * exceed 1024 bytes.  This will automatically call packet_write_wait.
1257  */
1258
1259 void
1260 packet_send_debug(const char *fmt,...)
1261 {
1262         char buf[1024];
1263         va_list args;
1264
1265         if (compat20 && (datafellows & SSH_BUG_DEBUG))
1266                 return;
1267
1268         va_start(args, fmt);
1269         vsnprintf(buf, sizeof(buf), fmt, args);
1270         va_end(args);
1271
1272         if (compat20) {
1273                 packet_start(SSH2_MSG_DEBUG);
1274                 packet_put_char(0);     /* bool: always display */
1275                 packet_put_cstring(buf);
1276                 packet_put_cstring("");
1277         } else {
1278                 packet_start(SSH_MSG_DEBUG);
1279                 packet_put_cstring(buf);
1280         }
1281         packet_send();
1282         packet_write_wait();
1283 }
1284
1285 /*
1286  * Logs the error plus constructs and sends a disconnect packet, closes the
1287  * connection, and exits.  This function never returns. The error message
1288  * should not contain a newline.  The length of the formatted message must
1289  * not exceed 1024 bytes.
1290  */
1291
1292 void
1293 packet_disconnect(const char *fmt,...)
1294 {
1295         char buf[1024];
1296         va_list args;
1297         static int disconnecting = 0;
1298
1299         if (disconnecting)      /* Guard against recursive invocations. */
1300                 fatal("packet_disconnect called recursively.");
1301         disconnecting = 1;
1302
1303         /*
1304          * Format the message.  Note that the caller must make sure the
1305          * message is of limited size.
1306          */
1307         va_start(args, fmt);
1308         vsnprintf(buf, sizeof(buf), fmt, args);
1309         va_end(args);
1310
1311         /* Display the error locally */
1312         logit("Disconnecting: %.100s", buf);
1313
1314         /* Send the disconnect message to the other side, and wait for it to get sent. */
1315         if (compat20) {
1316                 packet_start(SSH2_MSG_DISCONNECT);
1317                 packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR);
1318                 packet_put_cstring(buf);
1319                 packet_put_cstring("");
1320         } else {
1321                 packet_start(SSH_MSG_DISCONNECT);
1322                 packet_put_cstring(buf);
1323         }
1324         packet_send();
1325         packet_write_wait();
1326
1327         /* Stop listening for connections. */
1328         channel_close_all();
1329
1330         /* Close the connection. */
1331         packet_close();
1332
1333         fatal_cleanup();
1334 }
1335
1336 /* Checks if there is any buffered output, and tries to write some of the output. */
1337
1338 void
1339 packet_write_poll(void)
1340 {
1341         int len = buffer_len(&output);
1342
1343         if (len > 0) {
1344                 len = write(connection_out, buffer_ptr(&output), len);
1345                 if (len <= 0) {
1346                         if (errno == EAGAIN)
1347                                 return;
1348                         else
1349                                 fatal("Write failed: %.100s", strerror(errno));
1350                 }
1351                 buffer_consume(&output, len);
1352         }
1353 }
1354
1355 /*
1356  * Calls packet_write_poll repeatedly until all pending output data has been
1357  * written.
1358  */
1359
1360 void
1361 packet_write_wait(void)
1362 {
1363         fd_set *setp;
1364
1365         setp = (fd_set *)xmalloc(howmany(connection_out + 1, NFDBITS) *
1366             sizeof(fd_mask));
1367         packet_write_poll();
1368         while (packet_have_data_to_write()) {
1369                 memset(setp, 0, howmany(connection_out + 1, NFDBITS) *
1370                     sizeof(fd_mask));
1371                 FD_SET(connection_out, setp);
1372                 while (select(connection_out + 1, NULL, setp, NULL, NULL) == -1 &&
1373                     (errno == EAGAIN || errno == EINTR))
1374                         ;
1375                 packet_write_poll();
1376         }
1377         xfree(setp);
1378 }
1379
1380 /* Returns true if there is buffered data to write to the connection. */
1381
1382 int
1383 packet_have_data_to_write(void)
1384 {
1385         return buffer_len(&output) != 0;
1386 }
1387
1388 /* Returns true if there is not too much data to write to the connection. */
1389
1390 int
1391 packet_not_very_much_data_to_write(void)
1392 {
1393         if (interactive_mode)
1394                 return buffer_len(&output) < 16384;
1395         else
1396                 return buffer_len(&output) < 128 * 1024;
1397 }
1398
1399
1400 #if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
1401 static void
1402 packet_set_tos(int interactive)
1403 {
1404         int tos = interactive ? IPTOS_LOWDELAY : IPTOS_THROUGHPUT;
1405
1406         if (!packet_connection_is_on_socket() ||
1407             !packet_connection_is_ipv4())
1408                 return;
1409         if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, &tos,
1410             sizeof(tos)) < 0)
1411                 error("setsockopt IP_TOS %d: %.100s:",
1412                     tos, strerror(errno));
1413 }
1414 #endif
1415
1416 /* Informs that the current session is interactive.  Sets IP flags for that. */
1417
1418 void
1419 packet_set_interactive(int interactive)
1420 {
1421         static int called = 0;
1422
1423         if (called)
1424                 return;
1425         called = 1;
1426
1427         /* Record that we are in interactive mode. */
1428         interactive_mode = interactive;
1429
1430         /* Only set socket options if using a socket.  */
1431         if (!packet_connection_is_on_socket())
1432                 return;
1433         if (interactive)
1434                 set_nodelay(connection_in);
1435 #if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
1436         packet_set_tos(interactive);
1437 #endif
1438
1439 }
1440
1441 /* Returns true if the current connection is interactive. */
1442
1443 int
1444 packet_is_interactive(void)
1445 {
1446         return interactive_mode;
1447 }
1448
1449 u_int
1450 packet_set_maxsize(u_int s)
1451 {
1452         static int called = 0;
1453
1454         if (called) {
1455                 logit("packet_set_maxsize: called twice: old %d new %d",
1456                     max_packet_size, s);
1457                 return -1;
1458         }
1459         if (s < 4 * 1024 || s > 1024 * 1024) {
1460                 logit("packet_set_maxsize: bad size %d", s);
1461                 return -1;
1462         }
1463         called = 1;
1464         debug("packet_set_maxsize: setting to %d", s);
1465         max_packet_size = s;
1466         return s;
1467 }
1468
1469 /* roundup current message to pad bytes */
1470 void
1471 packet_add_padding(u_char pad)
1472 {
1473         extra_pad = pad;
1474 }
1475
1476 /*
1477  * 9.2.  Ignored Data Message
1478  *
1479  *   byte      SSH_MSG_IGNORE
1480  *   string    data
1481  *
1482  * All implementations MUST understand (and ignore) this message at any
1483  * time (after receiving the protocol version). No implementation is
1484  * required to send them. This message can be used as an additional
1485  * protection measure against advanced traffic analysis techniques.
1486  */
1487 void
1488 packet_send_ignore(int nbytes)
1489 {
1490         u_int32_t rand = 0;
1491         int i;
1492
1493         packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE);
1494         packet_put_int(nbytes);
1495         for (i = 0; i < nbytes; i++) {
1496                 if (i % 4 == 0)
1497                         rand = arc4random();
1498                 packet_put_char(rand & 0xff);
1499                 rand >>= 8;
1500         }
1501 }
1502
1503 #define MAX_PACKETS     (1<<31)
1504 int
1505 packet_need_rekeying(void)
1506 {
1507         if (datafellows & SSH_BUG_NOREKEY)
1508                 return 0;
1509         return
1510             (p_send.packets > MAX_PACKETS) ||
1511             (p_read.packets > MAX_PACKETS) ||
1512             (max_blocks_out && (p_send.blocks > max_blocks_out)) ||
1513             (max_blocks_in  && (p_read.blocks > max_blocks_in));
1514 }
1515
1516 void
1517 packet_set_rekey_limit(u_int32_t bytes)
1518 {
1519         rekey_limit = bytes;
1520 }
This page took 0.326361 seconds and 5 git commands to generate.