]> andersk Git - openssh.git/blob - sshd.c
- (dtucker) Wrap use of IPPROTO_IPV6 in an ifdef for platforms that don't
[openssh.git] / sshd.c
1 /* $OpenBSD: sshd.c,v 1.368 2009/10/28 16:38:18 reyk Exp $ */
2 /*
3  * Author: Tatu Ylonen <ylo@cs.hut.fi>
4  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5  *                    All rights reserved
6  * This program is the ssh daemon.  It listens for connections from clients,
7  * and performs authentication, executes use commands or shell, and forwards
8  * information to/from the application to the user client over an encrypted
9  * connection.  This can also handle forwarding of X11, TCP/IP, and
10  * authentication agent connections.
11  *
12  * As far as I am concerned, the code I have written for this software
13  * can be used freely for any purpose.  Any derived versions of this
14  * software must be clearly marked as such, and if the derived work is
15  * incompatible with the protocol description in the RFC file, it must be
16  * called by a name other than "ssh" or "Secure Shell".
17  *
18  * SSH2 implementation:
19  * Privilege Separation:
20  *
21  * Copyright (c) 2000, 2001, 2002 Markus Friedl.  All rights reserved.
22  * Copyright (c) 2002 Niels Provos.  All rights reserved.
23  *
24  * Redistribution and use in source and binary forms, with or without
25  * modification, are permitted provided that the following conditions
26  * are met:
27  * 1. Redistributions of source code must retain the above copyright
28  *    notice, this list of conditions and the following disclaimer.
29  * 2. Redistributions in binary form must reproduce the above copyright
30  *    notice, this list of conditions and the following disclaimer in the
31  *    documentation and/or other materials provided with the distribution.
32  *
33  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
34  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
35  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
36  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
37  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
38  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
39  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
40  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
41  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
42  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43  */
44
45 #include "includes.h"
46
47 #include <sys/types.h>
48 #include <sys/ioctl.h>
49 #include <sys/socket.h>
50 #ifdef HAVE_SYS_STAT_H
51 # include <sys/stat.h>
52 #endif
53 #ifdef HAVE_SYS_TIME_H
54 # include <sys/time.h>
55 #endif
56 #include "openbsd-compat/sys-tree.h"
57 #include "openbsd-compat/sys-queue.h"
58 #include <sys/wait.h>
59
60 #include <errno.h>
61 #include <fcntl.h>
62 #include <netdb.h>
63 #ifdef HAVE_PATHS_H
64 #include <paths.h>
65 #endif
66 #include <grp.h>
67 #include <pwd.h>
68 #include <signal.h>
69 #include <stdarg.h>
70 #include <stdio.h>
71 #include <stdlib.h>
72 #include <string.h>
73 #include <unistd.h>
74
75 #include <openssl/dh.h>
76 #include <openssl/bn.h>
77 #include <openssl/md5.h>
78 #include <openssl/rand.h>
79 #include "openbsd-compat/openssl-compat.h"
80
81 #ifdef HAVE_SECUREWARE
82 #include <sys/security.h>
83 #include <prot.h>
84 #endif
85
86 #include "xmalloc.h"
87 #include "ssh.h"
88 #include "ssh1.h"
89 #include "ssh2.h"
90 #include "rsa.h"
91 #include "sshpty.h"
92 #include "packet.h"
93 #include "log.h"
94 #include "buffer.h"
95 #include "servconf.h"
96 #include "uidswap.h"
97 #include "compat.h"
98 #include "cipher.h"
99 #include "key.h"
100 #include "kex.h"
101 #include "dh.h"
102 #include "myproposal.h"
103 #include "authfile.h"
104 #include "pathnames.h"
105 #include "atomicio.h"
106 #include "canohost.h"
107 #include "hostfile.h"
108 #include "auth.h"
109 #include "misc.h"
110 #include "msg.h"
111 #include "dispatch.h"
112 #include "channels.h"
113 #include "session.h"
114 #include "monitor_mm.h"
115 #include "monitor.h"
116 #ifdef GSSAPI
117 #include "ssh-gss.h"
118 #endif
119 #include "monitor_wrap.h"
120 #include "roaming.h"
121 #include "version.h"
122
123 #ifdef LIBWRAP
124 #include <tcpd.h>
125 #include <syslog.h>
126 int allow_severity;
127 int deny_severity;
128 #endif /* LIBWRAP */
129
130 #ifndef O_NOCTTY
131 #define O_NOCTTY        0
132 #endif
133
134 /* Re-exec fds */
135 #define REEXEC_DEVCRYPTO_RESERVED_FD    (STDERR_FILENO + 1)
136 #define REEXEC_STARTUP_PIPE_FD          (STDERR_FILENO + 2)
137 #define REEXEC_CONFIG_PASS_FD           (STDERR_FILENO + 3)
138 #define REEXEC_MIN_FREE_FD              (STDERR_FILENO + 4)
139
140 extern char *__progname;
141
142 /* Server configuration options. */
143 ServerOptions options;
144
145 /* Name of the server configuration file. */
146 char *config_file_name = _PATH_SERVER_CONFIG_FILE;
147
148 /*
149  * Debug mode flag.  This can be set on the command line.  If debug
150  * mode is enabled, extra debugging output will be sent to the system
151  * log, the daemon will not go to background, and will exit after processing
152  * the first connection.
153  */
154 int debug_flag = 0;
155
156 /* Flag indicating that the daemon should only test the configuration and keys. */
157 int test_flag = 0;
158
159 /* Flag indicating that the daemon is being started from inetd. */
160 int inetd_flag = 0;
161
162 /* Flag indicating that sshd should not detach and become a daemon. */
163 int no_daemon_flag = 0;
164
165 /* debug goes to stderr unless inetd_flag is set */
166 int log_stderr = 0;
167
168 /* Saved arguments to main(). */
169 char **saved_argv;
170 int saved_argc;
171
172 /* re-exec */
173 int rexeced_flag = 0;
174 int rexec_flag = 1;
175 int rexec_argc = 0;
176 char **rexec_argv;
177
178 /*
179  * The sockets that the server is listening; this is used in the SIGHUP
180  * signal handler.
181  */
182 #define MAX_LISTEN_SOCKS        16
183 int listen_socks[MAX_LISTEN_SOCKS];
184 int num_listen_socks = 0;
185
186 /*
187  * the client's version string, passed by sshd2 in compat mode. if != NULL,
188  * sshd will skip the version-number exchange
189  */
190 char *client_version_string = NULL;
191 char *server_version_string = NULL;
192
193 /* for rekeying XXX fixme */
194 Kex *xxx_kex;
195
196 /*
197  * Any really sensitive data in the application is contained in this
198  * structure. The idea is that this structure could be locked into memory so
199  * that the pages do not get written into swap.  However, there are some
200  * problems. The private key contains BIGNUMs, and we do not (in principle)
201  * have access to the internals of them, and locking just the structure is
202  * not very useful.  Currently, memory locking is not implemented.
203  */
204 struct {
205         Key     *server_key;            /* ephemeral server key */
206         Key     *ssh1_host_key;         /* ssh1 host key */
207         Key     **host_keys;            /* all private host keys */
208         int     have_ssh1_key;
209         int     have_ssh2_key;
210         u_char  ssh1_cookie[SSH_SESSION_KEY_LENGTH];
211 } sensitive_data;
212
213 /*
214  * Flag indicating whether the RSA server key needs to be regenerated.
215  * Is set in the SIGALRM handler and cleared when the key is regenerated.
216  */
217 static volatile sig_atomic_t key_do_regen = 0;
218
219 /* This is set to true when a signal is received. */
220 static volatile sig_atomic_t received_sighup = 0;
221 static volatile sig_atomic_t received_sigterm = 0;
222
223 /* session identifier, used by RSA-auth */
224 u_char session_id[16];
225
226 /* same for ssh2 */
227 u_char *session_id2 = NULL;
228 u_int session_id2_len = 0;
229
230 /* record remote hostname or ip */
231 u_int utmp_len = MAXHOSTNAMELEN;
232
233 /* options.max_startup sized array of fd ints */
234 int *startup_pipes = NULL;
235 int startup_pipe;               /* in child */
236
237 /* variables used for privilege separation */
238 int use_privsep = -1;
239 struct monitor *pmonitor = NULL;
240
241 /* global authentication context */
242 Authctxt *the_authctxt = NULL;
243
244 /* sshd_config buffer */
245 Buffer cfg;
246
247 /* message to be displayed after login */
248 Buffer loginmsg;
249
250 /* Unprivileged user */
251 struct passwd *privsep_pw = NULL;
252
253 /* Prototypes for various functions defined later in this file. */
254 void destroy_sensitive_data(void);
255 void demote_sensitive_data(void);
256
257 static void do_ssh1_kex(void);
258 static void do_ssh2_kex(void);
259
260 /*
261  * Close all listening sockets
262  */
263 static void
264 close_listen_socks(void)
265 {
266         int i;
267
268         for (i = 0; i < num_listen_socks; i++)
269                 close(listen_socks[i]);
270         num_listen_socks = -1;
271 }
272
273 static void
274 close_startup_pipes(void)
275 {
276         int i;
277
278         if (startup_pipes)
279                 for (i = 0; i < options.max_startups; i++)
280                         if (startup_pipes[i] != -1)
281                                 close(startup_pipes[i]);
282 }
283
284 /*
285  * Signal handler for SIGHUP.  Sshd execs itself when it receives SIGHUP;
286  * the effect is to reread the configuration file (and to regenerate
287  * the server key).
288  */
289
290 /*ARGSUSED*/
291 static void
292 sighup_handler(int sig)
293 {
294         int save_errno = errno;
295
296         received_sighup = 1;
297         signal(SIGHUP, sighup_handler);
298         errno = save_errno;
299 }
300
301 /*
302  * Called from the main program after receiving SIGHUP.
303  * Restarts the server.
304  */
305 static void
306 sighup_restart(void)
307 {
308         logit("Received SIGHUP; restarting.");
309         close_listen_socks();
310         close_startup_pipes();
311         alarm(0);  /* alarm timer persists across exec */
312         execv(saved_argv[0], saved_argv);
313         logit("RESTART FAILED: av[0]='%.100s', error: %.100s.", saved_argv[0],
314             strerror(errno));
315         exit(1);
316 }
317
318 /*
319  * Generic signal handler for terminating signals in the master daemon.
320  */
321 /*ARGSUSED*/
322 static void
323 sigterm_handler(int sig)
324 {
325         received_sigterm = sig;
326 }
327
328 /*
329  * SIGCHLD handler.  This is called whenever a child dies.  This will then
330  * reap any zombies left by exited children.
331  */
332 /*ARGSUSED*/
333 static void
334 main_sigchld_handler(int sig)
335 {
336         int save_errno = errno;
337         pid_t pid;
338         int status;
339
340         while ((pid = waitpid(-1, &status, WNOHANG)) > 0 ||
341             (pid < 0 && errno == EINTR))
342                 ;
343
344         signal(SIGCHLD, main_sigchld_handler);
345         errno = save_errno;
346 }
347
348 /*
349  * Signal handler for the alarm after the login grace period has expired.
350  */
351 /*ARGSUSED*/
352 static void
353 grace_alarm_handler(int sig)
354 {
355         if (use_privsep && pmonitor != NULL && pmonitor->m_pid > 0)
356                 kill(pmonitor->m_pid, SIGALRM);
357
358         /* Log error and exit. */
359         sigdie("Timeout before authentication for %s", get_remote_ipaddr());
360 }
361
362 /*
363  * Signal handler for the key regeneration alarm.  Note that this
364  * alarm only occurs in the daemon waiting for connections, and it does not
365  * do anything with the private key or random state before forking.
366  * Thus there should be no concurrency control/asynchronous execution
367  * problems.
368  */
369 static void
370 generate_ephemeral_server_key(void)
371 {
372         verbose("Generating %s%d bit RSA key.",
373             sensitive_data.server_key ? "new " : "", options.server_key_bits);
374         if (sensitive_data.server_key != NULL)
375                 key_free(sensitive_data.server_key);
376         sensitive_data.server_key = key_generate(KEY_RSA1,
377             options.server_key_bits);
378         verbose("RSA key generation complete.");
379
380         arc4random_buf(sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
381         arc4random_stir();
382 }
383
384 /*ARGSUSED*/
385 static void
386 key_regeneration_alarm(int sig)
387 {
388         int save_errno = errno;
389
390         signal(SIGALRM, SIG_DFL);
391         errno = save_errno;
392         key_do_regen = 1;
393 }
394
395 static void
396 sshd_exchange_identification(int sock_in, int sock_out)
397 {
398         u_int i;
399         int mismatch;
400         int remote_major, remote_minor;
401         int major, minor;
402         char *s, *newline = "\n";
403         char buf[256];                  /* Must not be larger than remote_version. */
404         char remote_version[256];       /* Must be at least as big as buf. */
405
406         if ((options.protocol & SSH_PROTO_1) &&
407             (options.protocol & SSH_PROTO_2)) {
408                 major = PROTOCOL_MAJOR_1;
409                 minor = 99;
410         } else if (options.protocol & SSH_PROTO_2) {
411                 major = PROTOCOL_MAJOR_2;
412                 minor = PROTOCOL_MINOR_2;
413                 newline = "\r\n";
414         } else {
415                 major = PROTOCOL_MAJOR_1;
416                 minor = PROTOCOL_MINOR_1;
417         }
418         snprintf(buf, sizeof buf, "SSH-%d.%d-%.100s%s", major, minor,
419             SSH_VERSION, newline);
420         server_version_string = xstrdup(buf);
421
422         /* Send our protocol version identification. */
423         if (roaming_atomicio(vwrite, sock_out, server_version_string,
424             strlen(server_version_string))
425             != strlen(server_version_string)) {
426                 logit("Could not write ident string to %s", get_remote_ipaddr());
427                 cleanup_exit(255);
428         }
429
430         /* Read other sides version identification. */
431         memset(buf, 0, sizeof(buf));
432         for (i = 0; i < sizeof(buf) - 1; i++) {
433                 if (roaming_atomicio(read, sock_in, &buf[i], 1) != 1) {
434                         logit("Did not receive identification string from %s",
435                             get_remote_ipaddr());
436                         cleanup_exit(255);
437                 }
438                 if (buf[i] == '\r') {
439                         buf[i] = 0;
440                         /* Kludge for F-Secure Macintosh < 1.0.2 */
441                         if (i == 12 &&
442                             strncmp(buf, "SSH-1.5-W1.0", 12) == 0)
443                                 break;
444                         continue;
445                 }
446                 if (buf[i] == '\n') {
447                         buf[i] = 0;
448                         break;
449                 }
450         }
451         buf[sizeof(buf) - 1] = 0;
452         client_version_string = xstrdup(buf);
453
454         /*
455          * Check that the versions match.  In future this might accept
456          * several versions and set appropriate flags to handle them.
457          */
458         if (sscanf(client_version_string, "SSH-%d.%d-%[^\n]\n",
459             &remote_major, &remote_minor, remote_version) != 3) {
460                 s = "Protocol mismatch.\n";
461                 (void) atomicio(vwrite, sock_out, s, strlen(s));
462                 close(sock_in);
463                 close(sock_out);
464                 logit("Bad protocol version identification '%.100s' from %s",
465                     client_version_string, get_remote_ipaddr());
466                 cleanup_exit(255);
467         }
468         debug("Client protocol version %d.%d; client software version %.100s",
469             remote_major, remote_minor, remote_version);
470
471         compat_datafellows(remote_version);
472
473         if (datafellows & SSH_BUG_PROBE) {
474                 logit("probed from %s with %s.  Don't panic.",
475                     get_remote_ipaddr(), client_version_string);
476                 cleanup_exit(255);
477         }
478
479         if (datafellows & SSH_BUG_SCANNER) {
480                 logit("scanned from %s with %s.  Don't panic.",
481                     get_remote_ipaddr(), client_version_string);
482                 cleanup_exit(255);
483         }
484
485         mismatch = 0;
486         switch (remote_major) {
487         case 1:
488                 if (remote_minor == 99) {
489                         if (options.protocol & SSH_PROTO_2)
490                                 enable_compat20();
491                         else
492                                 mismatch = 1;
493                         break;
494                 }
495                 if (!(options.protocol & SSH_PROTO_1)) {
496                         mismatch = 1;
497                         break;
498                 }
499                 if (remote_minor < 3) {
500                         packet_disconnect("Your ssh version is too old and "
501                             "is no longer supported.  Please install a newer version.");
502                 } else if (remote_minor == 3) {
503                         /* note that this disables agent-forwarding */
504                         enable_compat13();
505                 }
506                 break;
507         case 2:
508                 if (options.protocol & SSH_PROTO_2) {
509                         enable_compat20();
510                         break;
511                 }
512                 /* FALLTHROUGH */
513         default:
514                 mismatch = 1;
515                 break;
516         }
517         chop(server_version_string);
518         debug("Local version string %.200s", server_version_string);
519
520         if (mismatch) {
521                 s = "Protocol major versions differ.\n";
522                 (void) atomicio(vwrite, sock_out, s, strlen(s));
523                 close(sock_in);
524                 close(sock_out);
525                 logit("Protocol major versions differ for %s: %.200s vs. %.200s",
526                     get_remote_ipaddr(),
527                     server_version_string, client_version_string);
528                 cleanup_exit(255);
529         }
530 }
531
532 /* Destroy the host and server keys.  They will no longer be needed. */
533 void
534 destroy_sensitive_data(void)
535 {
536         int i;
537
538         if (sensitive_data.server_key) {
539                 key_free(sensitive_data.server_key);
540                 sensitive_data.server_key = NULL;
541         }
542         for (i = 0; i < options.num_host_key_files; i++) {
543                 if (sensitive_data.host_keys[i]) {
544                         key_free(sensitive_data.host_keys[i]);
545                         sensitive_data.host_keys[i] = NULL;
546                 }
547         }
548         sensitive_data.ssh1_host_key = NULL;
549         memset(sensitive_data.ssh1_cookie, 0, SSH_SESSION_KEY_LENGTH);
550 }
551
552 /* Demote private to public keys for network child */
553 void
554 demote_sensitive_data(void)
555 {
556         Key *tmp;
557         int i;
558
559         if (sensitive_data.server_key) {
560                 tmp = key_demote(sensitive_data.server_key);
561                 key_free(sensitive_data.server_key);
562                 sensitive_data.server_key = tmp;
563         }
564
565         for (i = 0; i < options.num_host_key_files; i++) {
566                 if (sensitive_data.host_keys[i]) {
567                         tmp = key_demote(sensitive_data.host_keys[i]);
568                         key_free(sensitive_data.host_keys[i]);
569                         sensitive_data.host_keys[i] = tmp;
570                         if (tmp->type == KEY_RSA1)
571                                 sensitive_data.ssh1_host_key = tmp;
572                 }
573         }
574
575         /* We do not clear ssh1_host key and cookie.  XXX - Okay Niels? */
576 }
577
578 static void
579 privsep_preauth_child(void)
580 {
581         u_int32_t rnd[256];
582         gid_t gidset[1];
583
584         /* Enable challenge-response authentication for privilege separation */
585         privsep_challenge_enable();
586
587         arc4random_stir();
588         arc4random_buf(rnd, sizeof(rnd));
589         RAND_seed(rnd, sizeof(rnd));
590
591         /* Demote the private keys to public keys. */
592         demote_sensitive_data();
593
594         /* Change our root directory */
595         if (chroot(_PATH_PRIVSEP_CHROOT_DIR) == -1)
596                 fatal("chroot(\"%s\"): %s", _PATH_PRIVSEP_CHROOT_DIR,
597                     strerror(errno));
598         if (chdir("/") == -1)
599                 fatal("chdir(\"/\"): %s", strerror(errno));
600
601         /* Drop our privileges */
602         debug3("privsep user:group %u:%u", (u_int)privsep_pw->pw_uid,
603             (u_int)privsep_pw->pw_gid);
604 #if 0
605         /* XXX not ready, too heavy after chroot */
606         do_setusercontext(privsep_pw);
607 #else
608         gidset[0] = privsep_pw->pw_gid;
609         if (setgroups(1, gidset) < 0)
610                 fatal("setgroups: %.100s", strerror(errno));
611         permanently_set_uid(privsep_pw);
612 #endif
613 }
614
615 static int
616 privsep_preauth(Authctxt *authctxt)
617 {
618         int status;
619         pid_t pid;
620
621         /* Set up unprivileged child process to deal with network data */
622         pmonitor = monitor_init();
623         /* Store a pointer to the kex for later rekeying */
624         pmonitor->m_pkex = &xxx_kex;
625
626         pid = fork();
627         if (pid == -1) {
628                 fatal("fork of unprivileged child failed");
629         } else if (pid != 0) {
630                 debug2("Network child is on pid %ld", (long)pid);
631
632                 close(pmonitor->m_recvfd);
633                 pmonitor->m_pid = pid;
634                 monitor_child_preauth(authctxt, pmonitor);
635                 close(pmonitor->m_sendfd);
636
637                 /* Sync memory */
638                 monitor_sync(pmonitor);
639
640                 /* Wait for the child's exit status */
641                 while (waitpid(pid, &status, 0) < 0)
642                         if (errno != EINTR)
643                                 break;
644                 return (1);
645         } else {
646                 /* child */
647
648                 close(pmonitor->m_sendfd);
649
650                 /* Demote the child */
651                 if (getuid() == 0 || geteuid() == 0)
652                         privsep_preauth_child();
653                 setproctitle("%s", "[net]");
654         }
655         return (0);
656 }
657
658 static void
659 privsep_postauth(Authctxt *authctxt)
660 {
661         u_int32_t rnd[256];
662
663 #ifdef DISABLE_FD_PASSING
664         if (1) {
665 #else
666         if (authctxt->pw->pw_uid == 0 || options.use_login) {
667 #endif
668                 /* File descriptor passing is broken or root login */
669                 use_privsep = 0;
670                 goto skip;
671         }
672
673         /* New socket pair */
674         monitor_reinit(pmonitor);
675
676         pmonitor->m_pid = fork();
677         if (pmonitor->m_pid == -1)
678                 fatal("fork of unprivileged child failed");
679         else if (pmonitor->m_pid != 0) {
680                 verbose("User child is on pid %ld", (long)pmonitor->m_pid);
681                 close(pmonitor->m_recvfd);
682                 buffer_clear(&loginmsg);
683                 monitor_child_postauth(pmonitor);
684
685                 /* NEVERREACHED */
686                 exit(0);
687         }
688
689         close(pmonitor->m_sendfd);
690
691         /* Demote the private keys to public keys. */
692         demote_sensitive_data();
693
694         arc4random_stir();
695         arc4random_buf(rnd, sizeof(rnd));
696         RAND_seed(rnd, sizeof(rnd));
697
698         /* Drop privileges */
699         do_setusercontext(authctxt->pw);
700
701  skip:
702         /* It is safe now to apply the key state */
703         monitor_apply_keystate(pmonitor);
704
705         /*
706          * Tell the packet layer that authentication was successful, since
707          * this information is not part of the key state.
708          */
709         packet_set_authenticated();
710 }
711
712 static char *
713 list_hostkey_types(void)
714 {
715         Buffer b;
716         const char *p;
717         char *ret;
718         int i;
719
720         buffer_init(&b);
721         for (i = 0; i < options.num_host_key_files; i++) {
722                 Key *key = sensitive_data.host_keys[i];
723                 if (key == NULL)
724                         continue;
725                 switch (key->type) {
726                 case KEY_RSA:
727                 case KEY_DSA:
728                         if (buffer_len(&b) > 0)
729                                 buffer_append(&b, ",", 1);
730                         p = key_ssh_name(key);
731                         buffer_append(&b, p, strlen(p));
732                         break;
733                 }
734         }
735         buffer_append(&b, "\0", 1);
736         ret = xstrdup(buffer_ptr(&b));
737         buffer_free(&b);
738         debug("list_hostkey_types: %s", ret);
739         return ret;
740 }
741
742 Key *
743 get_hostkey_by_type(int type)
744 {
745         int i;
746
747         for (i = 0; i < options.num_host_key_files; i++) {
748                 Key *key = sensitive_data.host_keys[i];
749                 if (key != NULL && key->type == type)
750                         return key;
751         }
752         return NULL;
753 }
754
755 Key *
756 get_hostkey_by_index(int ind)
757 {
758         if (ind < 0 || ind >= options.num_host_key_files)
759                 return (NULL);
760         return (sensitive_data.host_keys[ind]);
761 }
762
763 int
764 get_hostkey_index(Key *key)
765 {
766         int i;
767
768         for (i = 0; i < options.num_host_key_files; i++) {
769                 if (key == sensitive_data.host_keys[i])
770                         return (i);
771         }
772         return (-1);
773 }
774
775 /*
776  * returns 1 if connection should be dropped, 0 otherwise.
777  * dropping starts at connection #max_startups_begin with a probability
778  * of (max_startups_rate/100). the probability increases linearly until
779  * all connections are dropped for startups > max_startups
780  */
781 static int
782 drop_connection(int startups)
783 {
784         int p, r;
785
786         if (startups < options.max_startups_begin)
787                 return 0;
788         if (startups >= options.max_startups)
789                 return 1;
790         if (options.max_startups_rate == 100)
791                 return 1;
792
793         p  = 100 - options.max_startups_rate;
794         p *= startups - options.max_startups_begin;
795         p /= options.max_startups - options.max_startups_begin;
796         p += options.max_startups_rate;
797         r = arc4random_uniform(100);
798
799         debug("drop_connection: p %d, r %d", p, r);
800         return (r < p) ? 1 : 0;
801 }
802
803 static void
804 usage(void)
805 {
806         fprintf(stderr, "%s, %s\n",
807             SSH_RELEASE, SSLeay_version(SSLEAY_VERSION));
808         fprintf(stderr,
809 "usage: sshd [-46DdeiqTt] [-b bits] [-C connection_spec] [-f config_file]\n"
810 "            [-g login_grace_time] [-h host_key_file] [-k key_gen_time]\n"
811 "            [-o option] [-p port] [-u len]\n"
812         );
813         exit(1);
814 }
815
816 static void
817 send_rexec_state(int fd, Buffer *conf)
818 {
819         Buffer m;
820
821         debug3("%s: entering fd = %d config len %d", __func__, fd,
822             buffer_len(conf));
823
824         /*
825          * Protocol from reexec master to child:
826          *      string  configuration
827          *      u_int   ephemeral_key_follows
828          *      bignum  e               (only if ephemeral_key_follows == 1)
829          *      bignum  n                       "
830          *      bignum  d                       "
831          *      bignum  iqmp                    "
832          *      bignum  p                       "
833          *      bignum  q                       "
834          *      string rngseed          (only if OpenSSL is not self-seeded)
835          */
836         buffer_init(&m);
837         buffer_put_cstring(&m, buffer_ptr(conf));
838
839         if (sensitive_data.server_key != NULL &&
840             sensitive_data.server_key->type == KEY_RSA1) {
841                 buffer_put_int(&m, 1);
842                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->e);
843                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->n);
844                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->d);
845                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->iqmp);
846                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->p);
847                 buffer_put_bignum(&m, sensitive_data.server_key->rsa->q);
848         } else
849                 buffer_put_int(&m, 0);
850
851 #ifndef OPENSSL_PRNG_ONLY
852         rexec_send_rng_seed(&m);
853 #endif
854
855         if (ssh_msg_send(fd, 0, &m) == -1)
856                 fatal("%s: ssh_msg_send failed", __func__);
857
858         buffer_free(&m);
859
860         debug3("%s: done", __func__);
861 }
862
863 static void
864 recv_rexec_state(int fd, Buffer *conf)
865 {
866         Buffer m;
867         char *cp;
868         u_int len;
869
870         debug3("%s: entering fd = %d", __func__, fd);
871
872         buffer_init(&m);
873
874         if (ssh_msg_recv(fd, &m) == -1)
875                 fatal("%s: ssh_msg_recv failed", __func__);
876         if (buffer_get_char(&m) != 0)
877                 fatal("%s: rexec version mismatch", __func__);
878
879         cp = buffer_get_string(&m, &len);
880         if (conf != NULL)
881                 buffer_append(conf, cp, len + 1);
882         xfree(cp);
883
884         if (buffer_get_int(&m)) {
885                 if (sensitive_data.server_key != NULL)
886                         key_free(sensitive_data.server_key);
887                 sensitive_data.server_key = key_new_private(KEY_RSA1);
888                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->e);
889                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->n);
890                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->d);
891                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->iqmp);
892                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->p);
893                 buffer_get_bignum(&m, sensitive_data.server_key->rsa->q);
894                 rsa_generate_additional_parameters(
895                     sensitive_data.server_key->rsa);
896         }
897
898 #ifndef OPENSSL_PRNG_ONLY
899         rexec_recv_rng_seed(&m);
900 #endif
901
902         buffer_free(&m);
903
904         debug3("%s: done", __func__);
905 }
906
907 /* Accept a connection from inetd */
908 static void
909 server_accept_inetd(int *sock_in, int *sock_out)
910 {
911         int fd;
912
913         startup_pipe = -1;
914         if (rexeced_flag) {
915                 close(REEXEC_CONFIG_PASS_FD);
916                 *sock_in = *sock_out = dup(STDIN_FILENO);
917                 if (!debug_flag) {
918                         startup_pipe = dup(REEXEC_STARTUP_PIPE_FD);
919                         close(REEXEC_STARTUP_PIPE_FD);
920                 }
921         } else {
922                 *sock_in = dup(STDIN_FILENO);
923                 *sock_out = dup(STDOUT_FILENO);
924         }
925         /*
926          * We intentionally do not close the descriptors 0, 1, and 2
927          * as our code for setting the descriptors won't work if
928          * ttyfd happens to be one of those.
929          */
930         if ((fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) {
931                 dup2(fd, STDIN_FILENO);
932                 dup2(fd, STDOUT_FILENO);
933                 if (fd > STDOUT_FILENO)
934                         close(fd);
935         }
936         debug("inetd sockets after dupping: %d, %d", *sock_in, *sock_out);
937 }
938
939 /*
940  * Listen for TCP connections
941  */
942 static void
943 server_listen(void)
944 {
945         int ret, listen_sock, on = 1;
946         struct addrinfo *ai;
947         char ntop[NI_MAXHOST], strport[NI_MAXSERV];
948
949         for (ai = options.listen_addrs; ai; ai = ai->ai_next) {
950                 if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6)
951                         continue;
952                 if (num_listen_socks >= MAX_LISTEN_SOCKS)
953                         fatal("Too many listen sockets. "
954                             "Enlarge MAX_LISTEN_SOCKS");
955                 if ((ret = getnameinfo(ai->ai_addr, ai->ai_addrlen,
956                     ntop, sizeof(ntop), strport, sizeof(strport),
957                     NI_NUMERICHOST|NI_NUMERICSERV)) != 0) {
958                         error("getnameinfo failed: %.100s",
959                             ssh_gai_strerror(ret));
960                         continue;
961                 }
962                 /* Create socket for listening. */
963                 listen_sock = socket_rdomain(ai->ai_family, ai->ai_socktype,
964                     ai->ai_protocol, options.rdomain);
965                 if (listen_sock < 0) {
966                         /* kernel may not support ipv6 */
967                         verbose("socket: %.100s", strerror(errno));
968                         continue;
969                 }
970                 if (set_nonblock(listen_sock) == -1) {
971                         close(listen_sock);
972                         continue;
973                 }
974                 /*
975                  * Set socket options.
976                  * Allow local port reuse in TIME_WAIT.
977                  */
978                 if (setsockopt(listen_sock, SOL_SOCKET, SO_REUSEADDR,
979                     &on, sizeof(on)) == -1)
980                         error("setsockopt SO_REUSEADDR: %s", strerror(errno));
981
982                 /* Only communicate in IPv6 over AF_INET6 sockets. */
983                 if (ai->ai_family == AF_INET6)
984                         sock_set_v6only(listen_sock);
985
986                 debug("Bind to port %s on %s.", strport, ntop);
987
988                 /* Bind the socket to the desired port. */
989                 if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
990                         error("Bind to port %s on %s failed: %.200s.",
991                             strport, ntop, strerror(errno));
992                         close(listen_sock);
993                         continue;
994                 }
995                 listen_socks[num_listen_socks] = listen_sock;
996                 num_listen_socks++;
997
998                 /* Start listening on the port. */
999                 if (listen(listen_sock, SSH_LISTEN_BACKLOG) < 0)
1000                         fatal("listen on [%s]:%s: %.100s",
1001                             ntop, strport, strerror(errno));
1002                 logit("Server listening on %s port %s.", ntop, strport);
1003         }
1004         freeaddrinfo(options.listen_addrs);
1005
1006         if (!num_listen_socks)
1007                 fatal("Cannot bind any address.");
1008 }
1009
1010 /*
1011  * The main TCP accept loop. Note that, for the non-debug case, returns
1012  * from this function are in a forked subprocess.
1013  */
1014 static void
1015 server_accept_loop(int *sock_in, int *sock_out, int *newsock, int *config_s)
1016 {
1017         fd_set *fdset;
1018         int i, j, ret, maxfd;
1019         int key_used = 0, startups = 0;
1020         int startup_p[2] = { -1 , -1 };
1021         struct sockaddr_storage from;
1022         socklen_t fromlen;
1023         pid_t pid;
1024
1025         /* setup fd set for accept */
1026         fdset = NULL;
1027         maxfd = 0;
1028         for (i = 0; i < num_listen_socks; i++)
1029                 if (listen_socks[i] > maxfd)
1030                         maxfd = listen_socks[i];
1031         /* pipes connected to unauthenticated childs */
1032         startup_pipes = xcalloc(options.max_startups, sizeof(int));
1033         for (i = 0; i < options.max_startups; i++)
1034                 startup_pipes[i] = -1;
1035
1036         /*
1037          * Stay listening for connections until the system crashes or
1038          * the daemon is killed with a signal.
1039          */
1040         for (;;) {
1041                 if (received_sighup)
1042                         sighup_restart();
1043                 if (fdset != NULL)
1044                         xfree(fdset);
1045                 fdset = (fd_set *)xcalloc(howmany(maxfd + 1, NFDBITS),
1046                     sizeof(fd_mask));
1047
1048                 for (i = 0; i < num_listen_socks; i++)
1049                         FD_SET(listen_socks[i], fdset);
1050                 for (i = 0; i < options.max_startups; i++)
1051                         if (startup_pipes[i] != -1)
1052                                 FD_SET(startup_pipes[i], fdset);
1053
1054                 /* Wait in select until there is a connection. */
1055                 ret = select(maxfd+1, fdset, NULL, NULL, NULL);
1056                 if (ret < 0 && errno != EINTR)
1057                         error("select: %.100s", strerror(errno));
1058                 if (received_sigterm) {
1059                         logit("Received signal %d; terminating.",
1060                             (int) received_sigterm);
1061                         close_listen_socks();
1062                         unlink(options.pid_file);
1063                         exit(255);
1064                 }
1065                 if (key_used && key_do_regen) {
1066                         generate_ephemeral_server_key();
1067                         key_used = 0;
1068                         key_do_regen = 0;
1069                 }
1070                 if (ret < 0)
1071                         continue;
1072
1073                 for (i = 0; i < options.max_startups; i++)
1074                         if (startup_pipes[i] != -1 &&
1075                             FD_ISSET(startup_pipes[i], fdset)) {
1076                                 /*
1077                                  * the read end of the pipe is ready
1078                                  * if the child has closed the pipe
1079                                  * after successful authentication
1080                                  * or if the child has died
1081                                  */
1082                                 close(startup_pipes[i]);
1083                                 startup_pipes[i] = -1;
1084                                 startups--;
1085                         }
1086                 for (i = 0; i < num_listen_socks; i++) {
1087                         if (!FD_ISSET(listen_socks[i], fdset))
1088                                 continue;
1089                         fromlen = sizeof(from);
1090                         *newsock = accept(listen_socks[i],
1091                             (struct sockaddr *)&from, &fromlen);
1092                         if (*newsock < 0) {
1093                                 if (errno != EINTR && errno != EAGAIN &&
1094                                     errno != EWOULDBLOCK)
1095                                         error("accept: %.100s", strerror(errno));
1096                                 continue;
1097                         }
1098                         if (unset_nonblock(*newsock) == -1) {
1099                                 close(*newsock);
1100                                 continue;
1101                         }
1102                         if (drop_connection(startups) == 1) {
1103                                 debug("drop connection #%d", startups);
1104                                 close(*newsock);
1105                                 continue;
1106                         }
1107                         if (pipe(startup_p) == -1) {
1108                                 close(*newsock);
1109                                 continue;
1110                         }
1111
1112                         if (rexec_flag && socketpair(AF_UNIX,
1113                             SOCK_STREAM, 0, config_s) == -1) {
1114                                 error("reexec socketpair: %s",
1115                                     strerror(errno));
1116                                 close(*newsock);
1117                                 close(startup_p[0]);
1118                                 close(startup_p[1]);
1119                                 continue;
1120                         }
1121
1122                         for (j = 0; j < options.max_startups; j++)
1123                                 if (startup_pipes[j] == -1) {
1124                                         startup_pipes[j] = startup_p[0];
1125                                         if (maxfd < startup_p[0])
1126                                                 maxfd = startup_p[0];
1127                                         startups++;
1128                                         break;
1129                                 }
1130
1131                         /*
1132                          * Got connection.  Fork a child to handle it, unless
1133                          * we are in debugging mode.
1134                          */
1135                         if (debug_flag) {
1136                                 /*
1137                                  * In debugging mode.  Close the listening
1138                                  * socket, and start processing the
1139                                  * connection without forking.
1140                                  */
1141                                 debug("Server will not fork when running in debugging mode.");
1142                                 close_listen_socks();
1143                                 *sock_in = *newsock;
1144                                 *sock_out = *newsock;
1145                                 close(startup_p[0]);
1146                                 close(startup_p[1]);
1147                                 startup_pipe = -1;
1148                                 pid = getpid();
1149                                 if (rexec_flag) {
1150                                         send_rexec_state(config_s[0],
1151                                             &cfg);
1152                                         close(config_s[0]);
1153                                 }
1154                                 break;
1155                         }
1156
1157                         /*
1158                          * Normal production daemon.  Fork, and have
1159                          * the child process the connection. The
1160                          * parent continues listening.
1161                          */
1162                         platform_pre_fork();
1163                         if ((pid = fork()) == 0) {
1164                                 /*
1165                                  * Child.  Close the listening and
1166                                  * max_startup sockets.  Start using
1167                                  * the accepted socket. Reinitialize
1168                                  * logging (since our pid has changed).
1169                                  * We break out of the loop to handle
1170                                  * the connection.
1171                                  */
1172                                 platform_post_fork_child();
1173                                 startup_pipe = startup_p[1];
1174                                 close_startup_pipes();
1175                                 close_listen_socks();
1176                                 *sock_in = *newsock;
1177                                 *sock_out = *newsock;
1178                                 log_init(__progname,
1179                                     options.log_level,
1180                                     options.log_facility,
1181                                     log_stderr);
1182                                 if (rexec_flag)
1183                                         close(config_s[0]);
1184                                 break;
1185                         }
1186
1187                         /* Parent.  Stay in the loop. */
1188                         platform_post_fork_parent(pid);
1189                         if (pid < 0)
1190                                 error("fork: %.100s", strerror(errno));
1191                         else
1192                                 debug("Forked child %ld.", (long)pid);
1193
1194                         close(startup_p[1]);
1195
1196                         if (rexec_flag) {
1197                                 send_rexec_state(config_s[0], &cfg);
1198                                 close(config_s[0]);
1199                                 close(config_s[1]);
1200                         }
1201
1202                         /*
1203                          * Mark that the key has been used (it
1204                          * was "given" to the child).
1205                          */
1206                         if ((options.protocol & SSH_PROTO_1) &&
1207                             key_used == 0) {
1208                                 /* Schedule server key regeneration alarm. */
1209                                 signal(SIGALRM, key_regeneration_alarm);
1210                                 alarm(options.key_regeneration_time);
1211                                 key_used = 1;
1212                         }
1213
1214                         close(*newsock);
1215
1216                         /*
1217                          * Ensure that our random state differs
1218                          * from that of the child
1219                          */
1220                         arc4random_stir();
1221                 }
1222
1223                 /* child process check (or debug mode) */
1224                 if (num_listen_socks < 0)
1225                         break;
1226         }
1227 }
1228
1229
1230 /*
1231  * Main program for the daemon.
1232  */
1233 int
1234 main(int ac, char **av)
1235 {
1236         extern char *optarg;
1237         extern int optind;
1238         int opt, i, on = 1;
1239         int sock_in = -1, sock_out = -1, newsock = -1;
1240         const char *remote_ip;
1241         char *test_user = NULL, *test_host = NULL, *test_addr = NULL;
1242         int remote_port;
1243         char *line, *p, *cp;
1244         int config_s[2] = { -1 , -1 };
1245         u_int64_t ibytes, obytes;
1246         mode_t new_umask;
1247         Key *key;
1248         Authctxt *authctxt;
1249
1250 #ifdef HAVE_SECUREWARE
1251         (void)set_auth_parameters(ac, av);
1252 #endif
1253         __progname = ssh_get_progname(av[0]);
1254         init_rng();
1255
1256         /* Save argv. Duplicate so setproctitle emulation doesn't clobber it */
1257         saved_argc = ac;
1258         rexec_argc = ac;
1259         saved_argv = xcalloc(ac + 1, sizeof(*saved_argv));
1260         for (i = 0; i < ac; i++)
1261                 saved_argv[i] = xstrdup(av[i]);
1262         saved_argv[i] = NULL;
1263
1264 #ifndef HAVE_SETPROCTITLE
1265         /* Prepare for later setproctitle emulation */
1266         compat_init_setproctitle(ac, av);
1267         av = saved_argv;
1268 #endif
1269
1270         if (geteuid() == 0 && setgroups(0, NULL) == -1)
1271                 debug("setgroups(): %.200s", strerror(errno));
1272
1273         /* Ensure that fds 0, 1 and 2 are open or directed to /dev/null */
1274         sanitise_stdfd();
1275
1276         /* Initialize configuration options to their default values. */
1277         initialize_server_options(&options);
1278
1279         /* Parse command-line arguments. */
1280         while ((opt = getopt(ac, av, "f:p:b:k:h:g:u:o:C:dDeiqrtQRT46")) != -1) {
1281                 switch (opt) {
1282                 case '4':
1283                         options.address_family = AF_INET;
1284                         break;
1285                 case '6':
1286                         options.address_family = AF_INET6;
1287                         break;
1288                 case 'f':
1289                         config_file_name = optarg;
1290                         break;
1291                 case 'd':
1292                         if (debug_flag == 0) {
1293                                 debug_flag = 1;
1294                                 options.log_level = SYSLOG_LEVEL_DEBUG1;
1295                         } else if (options.log_level < SYSLOG_LEVEL_DEBUG3)
1296                                 options.log_level++;
1297                         break;
1298                 case 'D':
1299                         no_daemon_flag = 1;
1300                         break;
1301                 case 'e':
1302                         log_stderr = 1;
1303                         break;
1304                 case 'i':
1305                         inetd_flag = 1;
1306                         break;
1307                 case 'r':
1308                         rexec_flag = 0;
1309                         break;
1310                 case 'R':
1311                         rexeced_flag = 1;
1312                         inetd_flag = 1;
1313                         break;
1314                 case 'Q':
1315                         /* ignored */
1316                         break;
1317                 case 'q':
1318                         options.log_level = SYSLOG_LEVEL_QUIET;
1319                         break;
1320                 case 'b':
1321                         options.server_key_bits = (int)strtonum(optarg, 256,
1322                             32768, NULL);
1323                         break;
1324                 case 'p':
1325                         options.ports_from_cmdline = 1;
1326                         if (options.num_ports >= MAX_PORTS) {
1327                                 fprintf(stderr, "too many ports.\n");
1328                                 exit(1);
1329                         }
1330                         options.ports[options.num_ports++] = a2port(optarg);
1331                         if (options.ports[options.num_ports-1] <= 0) {
1332                                 fprintf(stderr, "Bad port number.\n");
1333                                 exit(1);
1334                         }
1335                         break;
1336                 case 'g':
1337                         if ((options.login_grace_time = convtime(optarg)) == -1) {
1338                                 fprintf(stderr, "Invalid login grace time.\n");
1339                                 exit(1);
1340                         }
1341                         break;
1342                 case 'k':
1343                         if ((options.key_regeneration_time = convtime(optarg)) == -1) {
1344                                 fprintf(stderr, "Invalid key regeneration interval.\n");
1345                                 exit(1);
1346                         }
1347                         break;
1348                 case 'h':
1349                         if (options.num_host_key_files >= MAX_HOSTKEYS) {
1350                                 fprintf(stderr, "too many host keys.\n");
1351                                 exit(1);
1352                         }
1353                         options.host_key_files[options.num_host_key_files++] = optarg;
1354                         break;
1355                 case 't':
1356                         test_flag = 1;
1357                         break;
1358                 case 'T':
1359                         test_flag = 2;
1360                         break;
1361                 case 'C':
1362                         cp = optarg;
1363                         while ((p = strsep(&cp, ",")) && *p != '\0') {
1364                                 if (strncmp(p, "addr=", 5) == 0)
1365                                         test_addr = xstrdup(p + 5);
1366                                 else if (strncmp(p, "host=", 5) == 0)
1367                                         test_host = xstrdup(p + 5);
1368                                 else if (strncmp(p, "user=", 5) == 0)
1369                                         test_user = xstrdup(p + 5);
1370                                 else {
1371                                         fprintf(stderr, "Invalid test "
1372                                             "mode specification %s\n", p);
1373                                         exit(1);
1374                                 }
1375                         }
1376                         break;
1377                 case 'u':
1378                         utmp_len = (u_int)strtonum(optarg, 0, MAXHOSTNAMELEN+1, NULL);
1379                         if (utmp_len > MAXHOSTNAMELEN) {
1380                                 fprintf(stderr, "Invalid utmp length.\n");
1381                                 exit(1);
1382                         }
1383                         break;
1384                 case 'o':
1385                         line = xstrdup(optarg);
1386                         if (process_server_config_line(&options, line,
1387                             "command-line", 0, NULL, NULL, NULL, NULL) != 0)
1388                                 exit(1);
1389                         xfree(line);
1390                         break;
1391                 case '?':
1392                 default:
1393                         usage();
1394                         break;
1395                 }
1396         }
1397         if (rexeced_flag || inetd_flag)
1398                 rexec_flag = 0;
1399         if (!test_flag && (rexec_flag && (av[0] == NULL || *av[0] != '/')))
1400                 fatal("sshd re-exec requires execution with an absolute path");
1401         if (rexeced_flag)
1402                 closefrom(REEXEC_MIN_FREE_FD);
1403         else
1404                 closefrom(REEXEC_DEVCRYPTO_RESERVED_FD);
1405
1406         SSLeay_add_all_algorithms();
1407
1408         /*
1409          * Force logging to stderr until we have loaded the private host
1410          * key (unless started from inetd)
1411          */
1412         log_init(__progname,
1413             options.log_level == SYSLOG_LEVEL_NOT_SET ?
1414             SYSLOG_LEVEL_INFO : options.log_level,
1415             options.log_facility == SYSLOG_FACILITY_NOT_SET ?
1416             SYSLOG_FACILITY_AUTH : options.log_facility,
1417             log_stderr || !inetd_flag);
1418
1419         /*
1420          * Unset KRB5CCNAME, otherwise the user's session may inherit it from
1421          * root's environment
1422          */
1423         if (getenv("KRB5CCNAME") != NULL)
1424                 unsetenv("KRB5CCNAME");
1425
1426 #ifdef _UNICOS
1427         /* Cray can define user privs drop all privs now!
1428          * Not needed on PRIV_SU systems!
1429          */
1430         drop_cray_privs();
1431 #endif
1432
1433         sensitive_data.server_key = NULL;
1434         sensitive_data.ssh1_host_key = NULL;
1435         sensitive_data.have_ssh1_key = 0;
1436         sensitive_data.have_ssh2_key = 0;
1437
1438         /*
1439          * If we're doing an extended config test, make sure we have all of
1440          * the parameters we need.  If we're not doing an extended test,
1441          * do not silently ignore connection test params.
1442          */
1443         if (test_flag >= 2 &&
1444            (test_user != NULL || test_host != NULL || test_addr != NULL)
1445             && (test_user == NULL || test_host == NULL || test_addr == NULL))
1446                 fatal("user, host and addr are all required when testing "
1447                    "Match configs");
1448         if (test_flag < 2 && (test_user != NULL || test_host != NULL ||
1449             test_addr != NULL))
1450                 fatal("Config test connection parameter (-C) provided without "
1451                    "test mode (-T)");
1452
1453         /* Fetch our configuration */
1454         buffer_init(&cfg);
1455         if (rexeced_flag)
1456                 recv_rexec_state(REEXEC_CONFIG_PASS_FD, &cfg);
1457         else
1458                 load_server_config(config_file_name, &cfg);
1459
1460         parse_server_config(&options, rexeced_flag ? "rexec" : config_file_name,
1461             &cfg, NULL, NULL, NULL);
1462
1463         seed_rng();
1464
1465         /* Fill in default values for those options not explicitly set. */
1466         fill_default_server_options(&options);
1467
1468         /* challenge-response is implemented via keyboard interactive */
1469         if (options.challenge_response_authentication)
1470                 options.kbd_interactive_authentication = 1;
1471
1472         /* set default channel AF and routing domain */
1473         channel_set_af(options.address_family);
1474         channel_set_rdomain(options.rdomain);
1475
1476         /* Check that there are no remaining arguments. */
1477         if (optind < ac) {
1478                 fprintf(stderr, "Extra argument %s.\n", av[optind]);
1479                 exit(1);
1480         }
1481
1482         debug("sshd version %.100s", SSH_RELEASE);
1483
1484         /* Store privilege separation user for later use if required. */
1485         if ((privsep_pw = getpwnam(SSH_PRIVSEP_USER)) == NULL) {
1486                 if (use_privsep || options.kerberos_authentication)
1487                         fatal("Privilege separation user %s does not exist",
1488                             SSH_PRIVSEP_USER);
1489         } else {
1490                 memset(privsep_pw->pw_passwd, 0, strlen(privsep_pw->pw_passwd));
1491                 privsep_pw = pwcopy(privsep_pw);
1492                 xfree(privsep_pw->pw_passwd);
1493                 privsep_pw->pw_passwd = xstrdup("*");
1494         }
1495         endpwent();
1496
1497         /* load private host keys */
1498         sensitive_data.host_keys = xcalloc(options.num_host_key_files,
1499             sizeof(Key *));
1500         for (i = 0; i < options.num_host_key_files; i++)
1501                 sensitive_data.host_keys[i] = NULL;
1502
1503         for (i = 0; i < options.num_host_key_files; i++) {
1504                 key = key_load_private(options.host_key_files[i], "", NULL);
1505                 sensitive_data.host_keys[i] = key;
1506                 if (key == NULL) {
1507                         error("Could not load host key: %s",
1508                             options.host_key_files[i]);
1509                         sensitive_data.host_keys[i] = NULL;
1510                         continue;
1511                 }
1512                 switch (key->type) {
1513                 case KEY_RSA1:
1514                         sensitive_data.ssh1_host_key = key;
1515                         sensitive_data.have_ssh1_key = 1;
1516                         break;
1517                 case KEY_RSA:
1518                 case KEY_DSA:
1519                         sensitive_data.have_ssh2_key = 1;
1520                         break;
1521                 }
1522                 debug("private host key: #%d type %d %s", i, key->type,
1523                     key_type(key));
1524         }
1525         if ((options.protocol & SSH_PROTO_1) && !sensitive_data.have_ssh1_key) {
1526                 logit("Disabling protocol version 1. Could not load host key");
1527                 options.protocol &= ~SSH_PROTO_1;
1528         }
1529         if ((options.protocol & SSH_PROTO_2) && !sensitive_data.have_ssh2_key) {
1530                 logit("Disabling protocol version 2. Could not load host key");
1531                 options.protocol &= ~SSH_PROTO_2;
1532         }
1533         if (!(options.protocol & (SSH_PROTO_1|SSH_PROTO_2))) {
1534                 logit("sshd: no hostkeys available -- exiting.");
1535                 exit(1);
1536         }
1537
1538         /* Check certain values for sanity. */
1539         if (options.protocol & SSH_PROTO_1) {
1540                 if (options.server_key_bits < 512 ||
1541                     options.server_key_bits > 32768) {
1542                         fprintf(stderr, "Bad server key size.\n");
1543                         exit(1);
1544                 }
1545                 /*
1546                  * Check that server and host key lengths differ sufficiently. This
1547                  * is necessary to make double encryption work with rsaref. Oh, I
1548                  * hate software patents. I dont know if this can go? Niels
1549                  */
1550                 if (options.server_key_bits >
1551                     BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) -
1552                     SSH_KEY_BITS_RESERVED && options.server_key_bits <
1553                     BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) +
1554                     SSH_KEY_BITS_RESERVED) {
1555                         options.server_key_bits =
1556                             BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) +
1557                             SSH_KEY_BITS_RESERVED;
1558                         debug("Forcing server key to %d bits to make it differ from host key.",
1559                             options.server_key_bits);
1560                 }
1561         }
1562
1563         if (use_privsep) {
1564                 struct stat st;
1565
1566                 if ((stat(_PATH_PRIVSEP_CHROOT_DIR, &st) == -1) ||
1567                     (S_ISDIR(st.st_mode) == 0))
1568                         fatal("Missing privilege separation directory: %s",
1569                             _PATH_PRIVSEP_CHROOT_DIR);
1570
1571 #ifdef HAVE_CYGWIN
1572                 if (check_ntsec(_PATH_PRIVSEP_CHROOT_DIR) &&
1573                     (st.st_uid != getuid () ||
1574                     (st.st_mode & (S_IWGRP|S_IWOTH)) != 0))
1575 #else
1576                 if (st.st_uid != 0 || (st.st_mode & (S_IWGRP|S_IWOTH)) != 0)
1577 #endif
1578                         fatal("%s must be owned by root and not group or "
1579                             "world-writable.", _PATH_PRIVSEP_CHROOT_DIR);
1580         }
1581
1582         if (test_flag > 1) {
1583                 if (test_user != NULL && test_addr != NULL && test_host != NULL)
1584                         parse_server_match_config(&options, test_user,
1585                             test_host, test_addr);
1586                 dump_config(&options);
1587         }
1588
1589         /* Configuration looks good, so exit if in test mode. */
1590         if (test_flag)
1591                 exit(0);
1592
1593         /*
1594          * Clear out any supplemental groups we may have inherited.  This
1595          * prevents inadvertent creation of files with bad modes (in the
1596          * portable version at least, it's certainly possible for PAM
1597          * to create a file, and we can't control the code in every
1598          * module which might be used).
1599          */
1600         if (setgroups(0, NULL) < 0)
1601                 debug("setgroups() failed: %.200s", strerror(errno));
1602
1603         if (rexec_flag) {
1604                 rexec_argv = xcalloc(rexec_argc + 2, sizeof(char *));
1605                 for (i = 0; i < rexec_argc; i++) {
1606                         debug("rexec_argv[%d]='%s'", i, saved_argv[i]);
1607                         rexec_argv[i] = saved_argv[i];
1608                 }
1609                 rexec_argv[rexec_argc] = "-R";
1610                 rexec_argv[rexec_argc + 1] = NULL;
1611         }
1612
1613         /* Ensure that umask disallows at least group and world write */
1614         new_umask = umask(0077) | 0022;
1615         (void) umask(new_umask);
1616
1617         /* Initialize the log (it is reinitialized below in case we forked). */
1618         if (debug_flag && (!inetd_flag || rexeced_flag))
1619                 log_stderr = 1;
1620         log_init(__progname, options.log_level, options.log_facility, log_stderr);
1621
1622         /*
1623          * If not in debugging mode, and not started from inetd, disconnect
1624          * from the controlling terminal, and fork.  The original process
1625          * exits.
1626          */
1627         if (!(debug_flag || inetd_flag || no_daemon_flag)) {
1628 #ifdef TIOCNOTTY
1629                 int fd;
1630 #endif /* TIOCNOTTY */
1631                 if (daemon(0, 0) < 0)
1632                         fatal("daemon() failed: %.200s", strerror(errno));
1633
1634                 /* Disconnect from the controlling tty. */
1635 #ifdef TIOCNOTTY
1636                 fd = open(_PATH_TTY, O_RDWR | O_NOCTTY);
1637                 if (fd >= 0) {
1638                         (void) ioctl(fd, TIOCNOTTY, NULL);
1639                         close(fd);
1640                 }
1641 #endif /* TIOCNOTTY */
1642         }
1643         /* Reinitialize the log (because of the fork above). */
1644         log_init(__progname, options.log_level, options.log_facility, log_stderr);
1645
1646         /* Initialize the random number generator. */
1647         arc4random_stir();
1648
1649         /* Chdir to the root directory so that the current disk can be
1650            unmounted if desired. */
1651         chdir("/");
1652
1653         /* ignore SIGPIPE */
1654         signal(SIGPIPE, SIG_IGN);
1655
1656         /* Get a connection, either from inetd or a listening TCP socket */
1657         if (inetd_flag) {
1658                 server_accept_inetd(&sock_in, &sock_out);
1659         } else {
1660                 platform_pre_listen();
1661                 server_listen();
1662
1663                 if (options.protocol & SSH_PROTO_1)
1664                         generate_ephemeral_server_key();
1665
1666                 signal(SIGHUP, sighup_handler);
1667                 signal(SIGCHLD, main_sigchld_handler);
1668                 signal(SIGTERM, sigterm_handler);
1669                 signal(SIGQUIT, sigterm_handler);
1670
1671                 /*
1672                  * Write out the pid file after the sigterm handler
1673                  * is setup and the listen sockets are bound
1674                  */
1675                 if (!debug_flag) {
1676                         FILE *f = fopen(options.pid_file, "w");
1677
1678                         if (f == NULL) {
1679                                 error("Couldn't create pid file \"%s\": %s",
1680                                     options.pid_file, strerror(errno));
1681                         } else {
1682                                 fprintf(f, "%ld\n", (long) getpid());
1683                                 fclose(f);
1684                         }
1685                 }
1686
1687                 /* Accept a connection and return in a forked child */
1688                 server_accept_loop(&sock_in, &sock_out,
1689                     &newsock, config_s);
1690         }
1691
1692         /* This is the child processing a new connection. */
1693         setproctitle("%s", "[accepted]");
1694
1695         /*
1696          * Create a new session and process group since the 4.4BSD
1697          * setlogin() affects the entire process group.  We don't
1698          * want the child to be able to affect the parent.
1699          */
1700 #if !defined(SSHD_ACQUIRES_CTTY)
1701         /*
1702          * If setsid is called, on some platforms sshd will later acquire a
1703          * controlling terminal which will result in "could not set
1704          * controlling tty" errors.
1705          */
1706         if (!debug_flag && !inetd_flag && setsid() < 0)
1707                 error("setsid: %.100s", strerror(errno));
1708 #endif
1709
1710         if (rexec_flag) {
1711                 int fd;
1712
1713                 debug("rexec start in %d out %d newsock %d pipe %d sock %d",
1714                     sock_in, sock_out, newsock, startup_pipe, config_s[0]);
1715                 dup2(newsock, STDIN_FILENO);
1716                 dup2(STDIN_FILENO, STDOUT_FILENO);
1717                 if (startup_pipe == -1)
1718                         close(REEXEC_STARTUP_PIPE_FD);
1719                 else
1720                         dup2(startup_pipe, REEXEC_STARTUP_PIPE_FD);
1721
1722                 dup2(config_s[1], REEXEC_CONFIG_PASS_FD);
1723                 close(config_s[1]);
1724                 if (startup_pipe != -1)
1725                         close(startup_pipe);
1726
1727                 execv(rexec_argv[0], rexec_argv);
1728
1729                 /* Reexec has failed, fall back and continue */
1730                 error("rexec of %s failed: %s", rexec_argv[0], strerror(errno));
1731                 recv_rexec_state(REEXEC_CONFIG_PASS_FD, NULL);
1732                 log_init(__progname, options.log_level,
1733                     options.log_facility, log_stderr);
1734
1735                 /* Clean up fds */
1736                 startup_pipe = REEXEC_STARTUP_PIPE_FD;
1737                 close(config_s[1]);
1738                 close(REEXEC_CONFIG_PASS_FD);
1739                 newsock = sock_out = sock_in = dup(STDIN_FILENO);
1740                 if ((fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) {
1741                         dup2(fd, STDIN_FILENO);
1742                         dup2(fd, STDOUT_FILENO);
1743                         if (fd > STDERR_FILENO)
1744                                 close(fd);
1745                 }
1746                 debug("rexec cleanup in %d out %d newsock %d pipe %d sock %d",
1747                     sock_in, sock_out, newsock, startup_pipe, config_s[0]);
1748         }
1749
1750         /*
1751          * Disable the key regeneration alarm.  We will not regenerate the
1752          * key since we are no longer in a position to give it to anyone. We
1753          * will not restart on SIGHUP since it no longer makes sense.
1754          */
1755         alarm(0);
1756         signal(SIGALRM, SIG_DFL);
1757         signal(SIGHUP, SIG_DFL);
1758         signal(SIGTERM, SIG_DFL);
1759         signal(SIGQUIT, SIG_DFL);
1760         signal(SIGCHLD, SIG_DFL);
1761         signal(SIGINT, SIG_DFL);
1762
1763         /*
1764          * Register our connection.  This turns encryption off because we do
1765          * not have a key.
1766          */
1767         packet_set_connection(sock_in, sock_out);
1768         packet_set_server();
1769
1770         /* Set SO_KEEPALIVE if requested. */
1771         if (options.tcp_keep_alive && packet_connection_is_on_socket() &&
1772             setsockopt(sock_in, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) < 0)
1773                 error("setsockopt SO_KEEPALIVE: %.100s", strerror(errno));
1774
1775         if ((remote_port = get_remote_port()) < 0) {
1776                 debug("get_remote_port failed");
1777                 cleanup_exit(255);
1778         }
1779
1780         /*
1781          * We use get_canonical_hostname with usedns = 0 instead of
1782          * get_remote_ipaddr here so IP options will be checked.
1783          */
1784         (void) get_canonical_hostname(0);
1785         /*
1786          * The rest of the code depends on the fact that
1787          * get_remote_ipaddr() caches the remote ip, even if
1788          * the socket goes away.
1789          */
1790         remote_ip = get_remote_ipaddr();
1791
1792 #ifdef SSH_AUDIT_EVENTS
1793         audit_connection_from(remote_ip, remote_port);
1794 #endif
1795 #ifdef LIBWRAP
1796         allow_severity = options.log_facility|LOG_INFO;
1797         deny_severity = options.log_facility|LOG_WARNING;
1798         /* Check whether logins are denied from this host. */
1799         if (packet_connection_is_on_socket()) {
1800                 struct request_info req;
1801
1802                 request_init(&req, RQ_DAEMON, __progname, RQ_FILE, sock_in, 0);
1803                 fromhost(&req);
1804
1805                 if (!hosts_access(&req)) {
1806                         debug("Connection refused by tcp wrapper");
1807                         refuse(&req);
1808                         /* NOTREACHED */
1809                         fatal("libwrap refuse returns");
1810                 }
1811         }
1812 #endif /* LIBWRAP */
1813
1814         /* Log the connection. */
1815         verbose("Connection from %.500s port %d", remote_ip, remote_port);
1816
1817         /*
1818          * We don't want to listen forever unless the other side
1819          * successfully authenticates itself.  So we set up an alarm which is
1820          * cleared after successful authentication.  A limit of zero
1821          * indicates no limit. Note that we don't set the alarm in debugging
1822          * mode; it is just annoying to have the server exit just when you
1823          * are about to discover the bug.
1824          */
1825         signal(SIGALRM, grace_alarm_handler);
1826         if (!debug_flag)
1827                 alarm(options.login_grace_time);
1828
1829         sshd_exchange_identification(sock_in, sock_out);
1830
1831         /* In inetd mode, generate ephemeral key only for proto 1 connections */
1832         if (!compat20 && inetd_flag && sensitive_data.server_key == NULL)
1833                 generate_ephemeral_server_key();
1834
1835         packet_set_nonblocking();
1836
1837         /* allocate authentication context */
1838         authctxt = xcalloc(1, sizeof(*authctxt));
1839
1840         authctxt->loginmsg = &loginmsg;
1841
1842         /* XXX global for cleanup, access from other modules */
1843         the_authctxt = authctxt;
1844
1845         /* prepare buffer to collect messages to display to user after login */
1846         buffer_init(&loginmsg);
1847
1848         if (use_privsep)
1849                 if (privsep_preauth(authctxt) == 1)
1850                         goto authenticated;
1851
1852         /* perform the key exchange */
1853         /* authenticate user and start session */
1854         if (compat20) {
1855                 do_ssh2_kex();
1856                 do_authentication2(authctxt);
1857         } else {
1858                 do_ssh1_kex();
1859                 do_authentication(authctxt);
1860         }
1861         /*
1862          * If we use privilege separation, the unprivileged child transfers
1863          * the current keystate and exits
1864          */
1865         if (use_privsep) {
1866                 mm_send_keystate(pmonitor);
1867                 exit(0);
1868         }
1869
1870  authenticated:
1871         /*
1872          * Cancel the alarm we set to limit the time taken for
1873          * authentication.
1874          */
1875         alarm(0);
1876         signal(SIGALRM, SIG_DFL);
1877         authctxt->authenticated = 1;
1878         if (startup_pipe != -1) {
1879                 close(startup_pipe);
1880                 startup_pipe = -1;
1881         }
1882
1883 #ifdef SSH_AUDIT_EVENTS
1884         audit_event(SSH_AUTH_SUCCESS);
1885 #endif
1886
1887 #ifdef GSSAPI
1888         if (options.gss_authentication) {
1889                 temporarily_use_uid(authctxt->pw);
1890                 ssh_gssapi_storecreds();
1891                 restore_uid();
1892         }
1893 #endif
1894 #ifdef USE_PAM
1895         if (options.use_pam) {
1896                 do_pam_setcred(1);
1897                 do_pam_session();
1898         }
1899 #endif
1900
1901         /*
1902          * In privilege separation, we fork another child and prepare
1903          * file descriptor passing.
1904          */
1905         if (use_privsep) {
1906                 privsep_postauth(authctxt);
1907                 /* the monitor process [priv] will not return */
1908                 if (!compat20)
1909                         destroy_sensitive_data();
1910         }
1911
1912         packet_set_timeout(options.client_alive_interval,
1913             options.client_alive_count_max);
1914
1915         /* Start session. */
1916         do_authenticated(authctxt);
1917
1918         /* The connection has been terminated. */
1919         packet_get_state(MODE_IN, NULL, NULL, NULL, &ibytes);
1920         packet_get_state(MODE_OUT, NULL, NULL, NULL, &obytes);
1921         verbose("Transferred: sent %llu, received %llu bytes", obytes, ibytes);
1922
1923         verbose("Closing connection to %.500s port %d", remote_ip, remote_port);
1924
1925 #ifdef USE_PAM
1926         if (options.use_pam)
1927                 finish_pam();
1928 #endif /* USE_PAM */
1929
1930 #ifdef SSH_AUDIT_EVENTS
1931         PRIVSEP(audit_event(SSH_CONNECTION_CLOSE));
1932 #endif
1933
1934         packet_close();
1935
1936         if (use_privsep)
1937                 mm_terminate();
1938
1939         exit(0);
1940 }
1941
1942 /*
1943  * Decrypt session_key_int using our private server key and private host key
1944  * (key with larger modulus first).
1945  */
1946 int
1947 ssh1_session_key(BIGNUM *session_key_int)
1948 {
1949         int rsafail = 0;
1950
1951         if (BN_cmp(sensitive_data.server_key->rsa->n,
1952             sensitive_data.ssh1_host_key->rsa->n) > 0) {
1953                 /* Server key has bigger modulus. */
1954                 if (BN_num_bits(sensitive_data.server_key->rsa->n) <
1955                     BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) +
1956                     SSH_KEY_BITS_RESERVED) {
1957                         fatal("do_connection: %s: "
1958                             "server_key %d < host_key %d + SSH_KEY_BITS_RESERVED %d",
1959                             get_remote_ipaddr(),
1960                             BN_num_bits(sensitive_data.server_key->rsa->n),
1961                             BN_num_bits(sensitive_data.ssh1_host_key->rsa->n),
1962                             SSH_KEY_BITS_RESERVED);
1963                 }
1964                 if (rsa_private_decrypt(session_key_int, session_key_int,
1965                     sensitive_data.server_key->rsa) <= 0)
1966                         rsafail++;
1967                 if (rsa_private_decrypt(session_key_int, session_key_int,
1968                     sensitive_data.ssh1_host_key->rsa) <= 0)
1969                         rsafail++;
1970         } else {
1971                 /* Host key has bigger modulus (or they are equal). */
1972                 if (BN_num_bits(sensitive_data.ssh1_host_key->rsa->n) <
1973                     BN_num_bits(sensitive_data.server_key->rsa->n) +
1974                     SSH_KEY_BITS_RESERVED) {
1975                         fatal("do_connection: %s: "
1976                             "host_key %d < server_key %d + SSH_KEY_BITS_RESERVED %d",
1977                             get_remote_ipaddr(),
1978                             BN_num_bits(sensitive_data.ssh1_host_key->rsa->n),
1979                             BN_num_bits(sensitive_data.server_key->rsa->n),
1980                             SSH_KEY_BITS_RESERVED);
1981                 }
1982                 if (rsa_private_decrypt(session_key_int, session_key_int,
1983                     sensitive_data.ssh1_host_key->rsa) < 0)
1984                         rsafail++;
1985                 if (rsa_private_decrypt(session_key_int, session_key_int,
1986                     sensitive_data.server_key->rsa) < 0)
1987                         rsafail++;
1988         }
1989         return (rsafail);
1990 }
1991 /*
1992  * SSH1 key exchange
1993  */
1994 static void
1995 do_ssh1_kex(void)
1996 {
1997         int i, len;
1998         int rsafail = 0;
1999         BIGNUM *session_key_int;
2000         u_char session_key[SSH_SESSION_KEY_LENGTH];
2001         u_char cookie[8];
2002         u_int cipher_type, auth_mask, protocol_flags;
2003
2004         /*
2005          * Generate check bytes that the client must send back in the user
2006          * packet in order for it to be accepted; this is used to defy ip
2007          * spoofing attacks.  Note that this only works against somebody
2008          * doing IP spoofing from a remote machine; any machine on the local
2009          * network can still see outgoing packets and catch the random
2010          * cookie.  This only affects rhosts authentication, and this is one
2011          * of the reasons why it is inherently insecure.
2012          */
2013         arc4random_buf(cookie, sizeof(cookie));
2014
2015         /*
2016          * Send our public key.  We include in the packet 64 bits of random
2017          * data that must be matched in the reply in order to prevent IP
2018          * spoofing.
2019          */
2020         packet_start(SSH_SMSG_PUBLIC_KEY);
2021         for (i = 0; i < 8; i++)
2022                 packet_put_char(cookie[i]);
2023
2024         /* Store our public server RSA key. */
2025         packet_put_int(BN_num_bits(sensitive_data.server_key->rsa->n));
2026         packet_put_bignum(sensitive_data.server_key->rsa->e);
2027         packet_put_bignum(sensitive_data.server_key->rsa->n);
2028
2029         /* Store our public host RSA key. */
2030         packet_put_int(BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));
2031         packet_put_bignum(sensitive_data.ssh1_host_key->rsa->e);
2032         packet_put_bignum(sensitive_data.ssh1_host_key->rsa->n);
2033
2034         /* Put protocol flags. */
2035         packet_put_int(SSH_PROTOFLAG_HOST_IN_FWD_OPEN);
2036
2037         /* Declare which ciphers we support. */
2038         packet_put_int(cipher_mask_ssh1(0));
2039
2040         /* Declare supported authentication types. */
2041         auth_mask = 0;
2042         if (options.rhosts_rsa_authentication)
2043                 auth_mask |= 1 << SSH_AUTH_RHOSTS_RSA;
2044         if (options.rsa_authentication)
2045                 auth_mask |= 1 << SSH_AUTH_RSA;
2046         if (options.challenge_response_authentication == 1)
2047                 auth_mask |= 1 << SSH_AUTH_TIS;
2048         if (options.password_authentication)
2049                 auth_mask |= 1 << SSH_AUTH_PASSWORD;
2050         packet_put_int(auth_mask);
2051
2052         /* Send the packet and wait for it to be sent. */
2053         packet_send();
2054         packet_write_wait();
2055
2056         debug("Sent %d bit server key and %d bit host key.",
2057             BN_num_bits(sensitive_data.server_key->rsa->n),
2058             BN_num_bits(sensitive_data.ssh1_host_key->rsa->n));
2059
2060         /* Read clients reply (cipher type and session key). */
2061         packet_read_expect(SSH_CMSG_SESSION_KEY);
2062
2063         /* Get cipher type and check whether we accept this. */
2064         cipher_type = packet_get_char();
2065
2066         if (!(cipher_mask_ssh1(0) & (1 << cipher_type)))
2067                 packet_disconnect("Warning: client selects unsupported cipher.");
2068
2069         /* Get check bytes from the packet.  These must match those we
2070            sent earlier with the public key packet. */
2071         for (i = 0; i < 8; i++)
2072                 if (cookie[i] != packet_get_char())
2073                         packet_disconnect("IP Spoofing check bytes do not match.");
2074
2075         debug("Encryption type: %.200s", cipher_name(cipher_type));
2076
2077         /* Get the encrypted integer. */
2078         if ((session_key_int = BN_new()) == NULL)
2079                 fatal("do_ssh1_kex: BN_new failed");
2080         packet_get_bignum(session_key_int);
2081
2082         protocol_flags = packet_get_int();
2083         packet_set_protocol_flags(protocol_flags);
2084         packet_check_eom();
2085
2086         /* Decrypt session_key_int using host/server keys */
2087         rsafail = PRIVSEP(ssh1_session_key(session_key_int));
2088
2089         /*
2090          * Extract session key from the decrypted integer.  The key is in the
2091          * least significant 256 bits of the integer; the first byte of the
2092          * key is in the highest bits.
2093          */
2094         if (!rsafail) {
2095                 (void) BN_mask_bits(session_key_int, sizeof(session_key) * 8);
2096                 len = BN_num_bytes(session_key_int);
2097                 if (len < 0 || (u_int)len > sizeof(session_key)) {
2098                         error("do_ssh1_kex: bad session key len from %s: "
2099                             "session_key_int %d > sizeof(session_key) %lu",
2100                             get_remote_ipaddr(), len, (u_long)sizeof(session_key));
2101                         rsafail++;
2102                 } else {
2103                         memset(session_key, 0, sizeof(session_key));
2104                         BN_bn2bin(session_key_int,
2105                             session_key + sizeof(session_key) - len);
2106
2107                         derive_ssh1_session_id(
2108                             sensitive_data.ssh1_host_key->rsa->n,
2109                             sensitive_data.server_key->rsa->n,
2110                             cookie, session_id);
2111                         /*
2112                          * Xor the first 16 bytes of the session key with the
2113                          * session id.
2114                          */
2115                         for (i = 0; i < 16; i++)
2116                                 session_key[i] ^= session_id[i];
2117                 }
2118         }
2119         if (rsafail) {
2120                 int bytes = BN_num_bytes(session_key_int);
2121                 u_char *buf = xmalloc(bytes);
2122                 MD5_CTX md;
2123
2124                 logit("do_connection: generating a fake encryption key");
2125                 BN_bn2bin(session_key_int, buf);
2126                 MD5_Init(&md);
2127                 MD5_Update(&md, buf, bytes);
2128                 MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
2129                 MD5_Final(session_key, &md);
2130                 MD5_Init(&md);
2131                 MD5_Update(&md, session_key, 16);
2132                 MD5_Update(&md, buf, bytes);
2133                 MD5_Update(&md, sensitive_data.ssh1_cookie, SSH_SESSION_KEY_LENGTH);
2134                 MD5_Final(session_key + 16, &md);
2135                 memset(buf, 0, bytes);
2136                 xfree(buf);
2137                 for (i = 0; i < 16; i++)
2138                         session_id[i] = session_key[i] ^ session_key[i + 16];
2139         }
2140         /* Destroy the private and public keys. No longer. */
2141         destroy_sensitive_data();
2142
2143         if (use_privsep)
2144                 mm_ssh1_session_id(session_id);
2145
2146         /* Destroy the decrypted integer.  It is no longer needed. */
2147         BN_clear_free(session_key_int);
2148
2149         /* Set the session key.  From this on all communications will be encrypted. */
2150         packet_set_encryption_key(session_key, SSH_SESSION_KEY_LENGTH, cipher_type);
2151
2152         /* Destroy our copy of the session key.  It is no longer needed. */
2153         memset(session_key, 0, sizeof(session_key));
2154
2155         debug("Received session key; encryption turned on.");
2156
2157         /* Send an acknowledgment packet.  Note that this packet is sent encrypted. */
2158         packet_start(SSH_SMSG_SUCCESS);
2159         packet_send();
2160         packet_write_wait();
2161 }
2162
2163 /*
2164  * SSH2 key exchange: diffie-hellman-group1-sha1
2165  */
2166 static void
2167 do_ssh2_kex(void)
2168 {
2169         Kex *kex;
2170
2171         if (options.ciphers != NULL) {
2172                 myproposal[PROPOSAL_ENC_ALGS_CTOS] =
2173                 myproposal[PROPOSAL_ENC_ALGS_STOC] = options.ciphers;
2174         }
2175         myproposal[PROPOSAL_ENC_ALGS_CTOS] =
2176             compat_cipher_proposal(myproposal[PROPOSAL_ENC_ALGS_CTOS]);
2177         myproposal[PROPOSAL_ENC_ALGS_STOC] =
2178             compat_cipher_proposal(myproposal[PROPOSAL_ENC_ALGS_STOC]);
2179
2180         if (options.macs != NULL) {
2181                 myproposal[PROPOSAL_MAC_ALGS_CTOS] =
2182                 myproposal[PROPOSAL_MAC_ALGS_STOC] = options.macs;
2183         }
2184         if (options.compression == COMP_NONE) {
2185                 myproposal[PROPOSAL_COMP_ALGS_CTOS] =
2186                 myproposal[PROPOSAL_COMP_ALGS_STOC] = "none";
2187         } else if (options.compression == COMP_DELAYED) {
2188                 myproposal[PROPOSAL_COMP_ALGS_CTOS] =
2189                 myproposal[PROPOSAL_COMP_ALGS_STOC] = "none,zlib@openssh.com";
2190         }
2191
2192         myproposal[PROPOSAL_SERVER_HOST_KEY_ALGS] = list_hostkey_types();
2193
2194         /* start key exchange */
2195         kex = kex_setup(myproposal);
2196         kex->kex[KEX_DH_GRP1_SHA1] = kexdh_server;
2197         kex->kex[KEX_DH_GRP14_SHA1] = kexdh_server;
2198         kex->kex[KEX_DH_GEX_SHA1] = kexgex_server;
2199         kex->kex[KEX_DH_GEX_SHA256] = kexgex_server;
2200         kex->server = 1;
2201         kex->client_version_string=client_version_string;
2202         kex->server_version_string=server_version_string;
2203         kex->load_host_key=&get_hostkey_by_type;
2204         kex->host_key_index=&get_hostkey_index;
2205
2206         xxx_kex = kex;
2207
2208         dispatch_run(DISPATCH_BLOCK, &kex->done, kex);
2209
2210         session_id2 = kex->session_id;
2211         session_id2_len = kex->session_id_len;
2212
2213 #ifdef DEBUG_KEXDH
2214         /* send 1st encrypted/maced/compressed message */
2215         packet_start(SSH2_MSG_IGNORE);
2216         packet_put_cstring("markus");
2217         packet_send();
2218         packet_write_wait();
2219 #endif
2220         debug("KEX done");
2221 }
2222
2223 /* server specific fatal cleanup */
2224 void
2225 cleanup_exit(int i)
2226 {
2227         if (the_authctxt)
2228                 do_cleanup(the_authctxt);
2229 #ifdef SSH_AUDIT_EVENTS
2230         /* done after do_cleanup so it can cancel the PAM auth 'thread' */
2231         if (!use_privsep || mm_is_monitor())
2232                 audit_event(SSH_CONNECTION_ABANDON);
2233 #endif
2234         _exit(i);
2235 }
This page took 0.215762 seconds and 5 git commands to generate.