1 /* $OpenBSD: ttymodes.c,v 1.24 2006/07/11 20:07:25 stevesk Exp $ */
3 * Author: Tatu Ylonen <ylo@cs.hut.fi>
4 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
7 * As far as I am concerned, the code I have written for this software
8 * can be used freely for any purpose. Any derived versions of this
9 * software must be clearly marked as such, and if the derived work is
10 * incompatible with the protocol description in the RFC file, it must be
11 * called by a name other than "ssh" or "Secure Shell".
15 * SSH2 tty modes support by Kevin Steves.
16 * Copyright (c) 2001 Kevin Steves. All rights reserved.
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions
21 * 1. Redistributions of source code must retain the above copyright
22 * notice, this list of conditions and the following disclaimer.
23 * 2. Redistributions in binary form must reproduce the above copyright
24 * notice, this list of conditions and the following disclaimer in the
25 * documentation and/or other materials provided with the distribution.
27 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
29 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
30 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 * Encoding and decoding of terminal modes in a portable way.
41 * Much of the format is defined in ttymodes.h; it is included multiple times
42 * into this file with the appropriate macro definitions to generate the
60 * uint32 (u_int) follows speed in SSH1 and SSH2
62 #define TTY_OP_ISPEED_PROTO1 192
63 #define TTY_OP_OSPEED_PROTO1 193
64 #define TTY_OP_ISPEED_PROTO2 128
65 #define TTY_OP_OSPEED_PROTO2 129
68 * Converts POSIX speed_t to a baud rate. The values of the
69 * constants for speed_t are not themselves portable.
72 speed_to_baud(speed_t speed)
158 * Converts a numeric baud rate to a POSIX speed_t.
161 baud_to_speed(int baud)
247 * Encode a special character into SSH line format.
250 special_char_encode(cc_t c)
252 #ifdef _POSIX_VDISABLE
253 if (c == _POSIX_VDISABLE)
255 #endif /* _POSIX_VDISABLE */
260 * Decode a special character from SSH line format.
263 special_char_decode(u_int c)
265 #ifdef _POSIX_VDISABLE
267 return _POSIX_VDISABLE;
268 #endif /* _POSIX_VDISABLE */
273 * Encodes terminal modes for the terminal referenced by fd
274 * or tiop in a portable manner, and appends the modes to a packet
278 tty_make_modes(int fd, struct termios *tiop)
283 int tty_op_ospeed, tty_op_ispeed;
284 void (*put_arg)(Buffer *, u_int);
288 tty_op_ospeed = TTY_OP_OSPEED_PROTO2;
289 tty_op_ispeed = TTY_OP_ISPEED_PROTO2;
290 put_arg = buffer_put_int;
292 tty_op_ospeed = TTY_OP_OSPEED_PROTO1;
293 tty_op_ispeed = TTY_OP_ISPEED_PROTO1;
294 put_arg = (void (*)(Buffer *, u_int)) buffer_put_char;
298 if (tcgetattr(fd, &tio) == -1) {
299 logit("tcgetattr: %.100s", strerror(errno));
305 /* Store input and output baud rates. */
306 baud = speed_to_baud(cfgetospeed(&tio));
307 debug3("tty_make_modes: ospeed %d", baud);
308 buffer_put_char(&buf, tty_op_ospeed);
309 buffer_put_int(&buf, baud);
310 baud = speed_to_baud(cfgetispeed(&tio));
311 debug3("tty_make_modes: ispeed %d", baud);
312 buffer_put_char(&buf, tty_op_ispeed);
313 buffer_put_int(&buf, baud);
315 /* Store values of mode flags. */
316 #define TTYCHAR(NAME, OP) \
317 debug3("tty_make_modes: %d %d", OP, tio.c_cc[NAME]); \
318 buffer_put_char(&buf, OP); \
319 put_arg(&buf, special_char_encode(tio.c_cc[NAME]));
321 #define TTYMODE(NAME, FIELD, OP) \
322 debug3("tty_make_modes: %d %d", OP, ((tio.FIELD & NAME) != 0)); \
323 buffer_put_char(&buf, OP); \
324 put_arg(&buf, ((tio.FIELD & NAME) != 0));
326 #include "ttymodes.h"
332 /* Mark end of mode data. */
333 buffer_put_char(&buf, TTY_OP_END);
335 packet_put_string(buffer_ptr(&buf), buffer_len(&buf));
337 packet_put_raw(buffer_ptr(&buf), buffer_len(&buf));
342 * Decodes terminal modes for the terminal referenced by fd in a portable
343 * manner from a packet being read.
346 tty_parse_modes(int fd, int *n_bytes_ptr)
352 u_int (*get_arg)(void);
356 *n_bytes_ptr = packet_get_int();
357 debug3("tty_parse_modes: SSH2 n_bytes %d", *n_bytes_ptr);
358 if (*n_bytes_ptr == 0)
360 get_arg = packet_get_int;
363 get_arg = packet_get_char;
368 * Get old attributes for the terminal. We will modify these
369 * flags. I am hoping that if there are any machine-specific
370 * modes, they will initially have reasonable values.
372 if (tcgetattr(fd, &tio) == -1) {
373 logit("tcgetattr: %.100s", strerror(errno));
379 opcode = packet_get_char();
384 /* XXX: future conflict possible */
385 case TTY_OP_ISPEED_PROTO1:
386 case TTY_OP_ISPEED_PROTO2:
388 baud = packet_get_int();
389 debug3("tty_parse_modes: ispeed %d", baud);
391 cfsetispeed(&tio, baud_to_speed(baud)) == -1)
392 error("cfsetispeed failed for %d", baud);
395 /* XXX: future conflict possible */
396 case TTY_OP_OSPEED_PROTO1:
397 case TTY_OP_OSPEED_PROTO2:
399 baud = packet_get_int();
400 debug3("tty_parse_modes: ospeed %d", baud);
402 cfsetospeed(&tio, baud_to_speed(baud)) == -1)
403 error("cfsetospeed failed for %d", baud);
406 #define TTYCHAR(NAME, OP) \
408 n_bytes += arg_size; \
409 tio.c_cc[NAME] = special_char_decode(get_arg()); \
410 debug3("tty_parse_modes: %d %d", OP, tio.c_cc[NAME]); \
412 #define TTYMODE(NAME, FIELD, OP) \
414 n_bytes += arg_size; \
415 if ((arg = get_arg())) \
418 tio.FIELD &= ~NAME; \
419 debug3("tty_parse_modes: %d %d", OP, arg); \
422 #include "ttymodes.h"
428 debug("Ignoring unsupported tty mode opcode %d (0x%x)",
433 * Opcodes 1 to 127 are defined to have
434 * a one-byte argument.
435 * Opcodes 128 to 159 are defined to have
436 * an integer argument.
438 if (opcode > 0 && opcode < 128) {
440 (void) packet_get_char();
442 } else if (opcode >= 128 && opcode < 160) {
444 (void) packet_get_int();
448 * It is a truly undefined opcode (160 to 255).
449 * We have no idea about its arguments. So we
450 * must stop parsing. Note that some data
451 * may be left in the packet; hopefully there
452 * is nothing more coming after the mode data.
454 logit("parse_tty_modes: unknown opcode %d",
461 * Opcodes 1 to 159 are defined to have
463 * Opcodes 160 to 255 are undefined and
464 * cause parsing to stop.
466 if (opcode > 0 && opcode < 160) {
468 (void) packet_get_int();
471 logit("parse_tty_modes: unknown opcode %d",
480 if (*n_bytes_ptr != n_bytes) {
481 *n_bytes_ptr = n_bytes;
482 logit("parse_tty_modes: n_bytes_ptr != n_bytes: %d %d",
483 *n_bytes_ptr, n_bytes);
484 return; /* Don't process bytes passed */
487 return; /* Packet parsed ok but tcgetattr() failed */
489 /* Set the new modes for the terminal. */
490 if (tcsetattr(fd, TCSANOW, &tio) == -1)
491 logit("Setting tty modes failed: %.100s", strerror(errno));