]> andersk Git - gssapi-openssh.git/blob - openssh/session.c
The man2html from jbasney on pkilab2 works whereas the standard one doesn't.
[gssapi-openssh.git] / openssh / session.c
1 /* $OpenBSD: session.c,v 1.246 2009/04/17 19:23:06 stevesk Exp $ */
2 /*
3  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
4  *                    All rights reserved
5  *
6  * As far as I am concerned, the code I have written for this software
7  * can be used freely for any purpose.  Any derived versions of this
8  * software must be clearly marked as such, and if the derived work is
9  * incompatible with the protocol description in the RFC file, it must be
10  * called by a name other than "ssh" or "Secure Shell".
11  *
12  * SSH2 support by Markus Friedl.
13  * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved.
14  *
15  * Redistribution and use in source and binary forms, with or without
16  * modification, are permitted provided that the following conditions
17  * are met:
18  * 1. Redistributions of source code must retain the above copyright
19  *    notice, this list of conditions and the following disclaimer.
20  * 2. Redistributions in binary form must reproduce the above copyright
21  *    notice, this list of conditions and the following disclaimer in the
22  *    documentation and/or other materials provided with the distribution.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
25  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
29  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
30  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
31  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
32  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
33  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34  */
35
36 #include "includes.h"
37
38 #include <sys/types.h>
39 #include <sys/param.h>
40 #ifdef HAVE_SYS_STAT_H
41 # include <sys/stat.h>
42 #endif
43 #include <sys/socket.h>
44 #include <sys/un.h>
45 #include <sys/wait.h>
46
47 #include <arpa/inet.h>
48
49 #include <errno.h>
50 #include <grp.h>
51 #ifdef HAVE_PATHS_H
52 #include <paths.h>
53 #endif
54 #include <pwd.h>
55 #include <signal.h>
56 #include <stdarg.h>
57 #include <stdio.h>
58 #include <stdlib.h>
59 #include <string.h>
60 #include <unistd.h>
61
62 #include "openbsd-compat/sys-queue.h"
63 #include "xmalloc.h"
64 #include "ssh.h"
65 #include "ssh1.h"
66 #include "ssh2.h"
67 #include "sshpty.h"
68 #include "packet.h"
69 #include "buffer.h"
70 #include "match.h"
71 #include "uidswap.h"
72 #include "compat.h"
73 #include "channels.h"
74 #include "key.h"
75 #include "cipher.h"
76 #ifdef GSSAPI
77 #include "ssh-gss.h"
78 #endif
79 #include "hostfile.h"
80 #include "auth.h"
81 #include "auth-options.h"
82 #include "pathnames.h"
83 #include "log.h"
84 #include "servconf.h"
85 #include "sshlogin.h"
86 #include "serverloop.h"
87 #include "canohost.h"
88 #include "misc.h"
89 #include "session.h"
90 #include "kex.h"
91 #include "monitor_wrap.h"
92 #include "sftp.h"
93
94 #if defined(KRB5) && defined(USE_AFS)
95 #include <kafs.h>
96 #endif
97
98 #define IS_INTERNAL_SFTP(c) \
99         (!strncmp(c, INTERNAL_SFTP_NAME, sizeof(INTERNAL_SFTP_NAME) - 1) && \
100          (c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\0' || \
101           c[sizeof(INTERNAL_SFTP_NAME) - 1] == ' ' || \
102           c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\t'))
103
104 /* func */
105
106 Session *session_new(void);
107 void    session_set_fds(Session *, int, int, int, int);
108 void    session_pty_cleanup(Session *);
109 void    session_proctitle(Session *);
110 int     session_setup_x11fwd(Session *);
111 int     do_exec_pty(Session *, const char *);
112 int     do_exec_no_pty(Session *, const char *);
113 int     do_exec(Session *, const char *);
114 void    do_login(Session *, const char *);
115 #ifdef LOGIN_NEEDS_UTMPX
116 static void     do_pre_login(Session *s);
117 #endif
118 void    do_child(Session *, const char *);
119 void    do_motd(void);
120 int     check_quietlogin(Session *, const char *);
121
122 static void do_authenticated1(Authctxt *);
123 static void do_authenticated2(Authctxt *);
124
125 static int session_pty_req(Session *);
126
127 #ifdef SESSION_HOOKS
128 static void execute_session_hook(char* prog, Authctxt *authctxt,
129                                  int startup, int save);
130 #endif
131
132 /* import */
133 extern ServerOptions options;
134 extern char *__progname;
135 extern int log_stderr;
136 extern int debug_flag;
137 extern u_int utmp_len;
138 extern int startup_pipe;
139 extern void destroy_sensitive_data(void);
140 extern Buffer loginmsg;
141
142 /* original command from peer. */
143 const char *original_command = NULL;
144
145 /* data */
146 static int sessions_first_unused = -1;
147 static int sessions_nalloc = 0;
148 static Session *sessions = NULL;
149
150 #define SUBSYSTEM_NONE          0
151 #define SUBSYSTEM_EXT           1
152 #define SUBSYSTEM_INT_SFTP      2
153
154 #ifdef HAVE_LOGIN_CAP
155 login_cap_t *lc;
156 #endif
157
158 static int is_child = 0;
159
160 /* Name and directory of socket for authentication agent forwarding. */
161 static char *auth_sock_name = NULL;
162 static char *auth_sock_dir = NULL;
163
164 /* removes the agent forwarding socket */
165
166 static void
167 auth_sock_cleanup_proc(struct passwd *pw)
168 {
169         if (auth_sock_name != NULL) {
170                 temporarily_use_uid(pw);
171                 unlink(auth_sock_name);
172                 rmdir(auth_sock_dir);
173                 auth_sock_name = NULL;
174                 restore_uid();
175         }
176 }
177
178 static int
179 auth_input_request_forwarding(struct passwd * pw)
180 {
181         Channel *nc;
182         int sock = -1;
183         struct sockaddr_un sunaddr;
184
185         if (auth_sock_name != NULL) {
186                 error("authentication forwarding requested twice.");
187                 return 0;
188         }
189
190         /* Temporarily drop privileged uid for mkdir/bind. */
191         temporarily_use_uid(pw);
192
193         /* Allocate a buffer for the socket name, and format the name. */
194         auth_sock_dir = xstrdup("/tmp/ssh-XXXXXXXXXX");
195
196         /* Create private directory for socket */
197         if (mkdtemp(auth_sock_dir) == NULL) {
198                 packet_send_debug("Agent forwarding disabled: "
199                     "mkdtemp() failed: %.100s", strerror(errno));
200                 restore_uid();
201                 xfree(auth_sock_dir);
202                 auth_sock_dir = NULL;
203                 goto authsock_err;
204         }
205
206         xasprintf(&auth_sock_name, "%s/agent.%ld",
207             auth_sock_dir, (long) getpid());
208
209         /* Create the socket. */
210         sock = socket(AF_UNIX, SOCK_STREAM, 0);
211         if (sock < 0) {
212                 error("socket: %.100s", strerror(errno));
213                 restore_uid();
214                 goto authsock_err;
215         }
216
217         /* Bind it to the name. */
218         memset(&sunaddr, 0, sizeof(sunaddr));
219         sunaddr.sun_family = AF_UNIX;
220         strlcpy(sunaddr.sun_path, auth_sock_name, sizeof(sunaddr.sun_path));
221
222         if (bind(sock, (struct sockaddr *)&sunaddr, sizeof(sunaddr)) < 0) {
223                 error("bind: %.100s", strerror(errno));
224                 restore_uid();
225                 goto authsock_err;
226         }
227
228         /* Restore the privileged uid. */
229         restore_uid();
230
231         /* Start listening on the socket. */
232         if (listen(sock, SSH_LISTEN_BACKLOG) < 0) {
233                 error("listen: %.100s", strerror(errno));
234                 goto authsock_err;
235         }
236
237         /* Allocate a channel for the authentication agent socket. */
238         /* this shouldn't matter if its hpn or not - cjr */
239         nc = channel_new("auth socket",
240             SSH_CHANNEL_AUTH_SOCKET, sock, sock, -1,
241             CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
242             0, "auth socket", 1);
243         nc->path = xstrdup(auth_sock_name);
244         return 1;
245
246  authsock_err:
247         if (auth_sock_name != NULL)
248                 xfree(auth_sock_name);
249         if (auth_sock_dir != NULL) {
250                 rmdir(auth_sock_dir);
251                 xfree(auth_sock_dir);
252         }
253         if (sock != -1)
254                 close(sock);
255         auth_sock_name = NULL;
256         auth_sock_dir = NULL;
257         return 0;
258 }
259
260 static void
261 display_loginmsg(void)
262 {
263         if (buffer_len(&loginmsg) > 0) {
264                 buffer_append(&loginmsg, "\0", 1);
265                 printf("%s", (char *)buffer_ptr(&loginmsg));
266                 buffer_clear(&loginmsg);
267         }
268 }
269
270 void
271 do_authenticated(Authctxt *authctxt)
272 {
273         setproctitle("%s", authctxt->pw->pw_name);
274
275         /* setup the channel layer */
276         if (!no_port_forwarding_flag && options.allow_tcp_forwarding)
277                 channel_permit_all_opens();
278
279         if (compat20)
280                 do_authenticated2(authctxt);
281         else
282                 do_authenticated1(authctxt);
283
284 #ifdef SESSION_HOOKS
285         if (options.session_hooks_allow &&
286             options.session_hooks_shutdown_cmd)
287         {
288             execute_session_hook(options.session_hooks_shutdown_cmd,
289                                  authctxt,
290                                  /* startup = */ 0, /* save = */ 0);
291
292             if (authctxt->session_env_file)
293             {
294                 free(authctxt->session_env_file);
295             }
296         }
297 #endif
298
299         do_cleanup(authctxt);
300 }
301
302 /*
303  * Prepares for an interactive session.  This is called after the user has
304  * been successfully authenticated.  During this message exchange, pseudo
305  * terminals are allocated, X11, TCP/IP, and authentication agent forwardings
306  * are requested, etc.
307  */
308 static void
309 do_authenticated1(Authctxt *authctxt)
310 {
311         Session *s;
312         char *command;
313         int success, type, screen_flag;
314         int enable_compression_after_reply = 0;
315         u_int proto_len, data_len, dlen, compression_level = 0;
316
317         s = session_new();
318         if (s == NULL) {
319                 error("no more sessions");
320                 return;
321         }
322         s->authctxt = authctxt;
323         s->pw = authctxt->pw;
324
325         /*
326          * We stay in this loop until the client requests to execute a shell
327          * or a command.
328          */
329         for (;;) {
330                 success = 0;
331
332                 /* Get a packet from the client. */
333                 type = packet_read();
334
335                 /* Process the packet. */
336                 switch (type) {
337                 case SSH_CMSG_REQUEST_COMPRESSION:
338                         compression_level = packet_get_int();
339                         packet_check_eom();
340                         if (compression_level < 1 || compression_level > 9) {
341                                 packet_send_debug("Received invalid compression level %d.",
342                                     compression_level);
343                                 break;
344                         }
345                         if (options.compression == COMP_NONE) {
346                                 debug2("compression disabled");
347                                 break;
348                         }
349                         /* Enable compression after we have responded with SUCCESS. */
350                         enable_compression_after_reply = 1;
351                         success = 1;
352                         break;
353
354                 case SSH_CMSG_REQUEST_PTY:
355                         success = session_pty_req(s);
356                         break;
357
358                 case SSH_CMSG_X11_REQUEST_FORWARDING:
359                         s->auth_proto = packet_get_string(&proto_len);
360                         s->auth_data = packet_get_string(&data_len);
361
362                         screen_flag = packet_get_protocol_flags() &
363                             SSH_PROTOFLAG_SCREEN_NUMBER;
364                         debug2("SSH_PROTOFLAG_SCREEN_NUMBER: %d", screen_flag);
365
366                         if (packet_remaining() == 4) {
367                                 if (!screen_flag)
368                                         debug2("Buggy client: "
369                                             "X11 screen flag missing");
370                                 s->screen = packet_get_int();
371                         } else {
372                                 s->screen = 0;
373                         }
374                         packet_check_eom();
375                         success = session_setup_x11fwd(s);
376                         if (!success) {
377                                 xfree(s->auth_proto);
378                                 xfree(s->auth_data);
379                                 s->auth_proto = NULL;
380                                 s->auth_data = NULL;
381                         }
382                         break;
383
384                 case SSH_CMSG_AGENT_REQUEST_FORWARDING:
385                         if (!options.allow_agent_forwarding ||
386                             no_agent_forwarding_flag || compat13) {
387                                 debug("Authentication agent forwarding not permitted for this authentication.");
388                                 break;
389                         }
390                         debug("Received authentication agent forwarding request.");
391                         success = auth_input_request_forwarding(s->pw);
392                         break;
393
394                 case SSH_CMSG_PORT_FORWARD_REQUEST:
395                         if (no_port_forwarding_flag) {
396                                 debug("Port forwarding not permitted for this authentication.");
397                                 break;
398                         }
399                         if (!options.allow_tcp_forwarding) {
400                                 debug("Port forwarding not permitted.");
401                                 break;
402                         }
403                         debug("Received TCP/IP port forwarding request.");
404                         if (channel_input_port_forward_request(s->pw->pw_uid == 0,
405                               options.gateway_ports) < 0) {
406                                 debug("Port forwarding failed.");
407                                 break;
408                         }
409                         success = 1;
410                         break;
411
412                 case SSH_CMSG_MAX_PACKET_SIZE:
413                         if (packet_set_maxsize(packet_get_int()) > 0)
414                                 success = 1;
415                         break;
416
417                 case SSH_CMSG_EXEC_SHELL:
418                 case SSH_CMSG_EXEC_CMD:
419                         if (type == SSH_CMSG_EXEC_CMD) {
420                                 command = packet_get_string(&dlen);
421                                 debug("Exec command '%.500s'", command);
422                                 if (do_exec(s, command) != 0)
423                                         packet_disconnect(
424                                             "command execution failed");
425                                 xfree(command);
426                         } else {
427                                 if (do_exec(s, NULL) != 0)
428                                         packet_disconnect(
429                                             "shell execution failed");
430                         }
431                         packet_check_eom();
432                         session_close(s);
433                         return;
434
435                 default:
436                         /*
437                          * Any unknown messages in this phase are ignored,
438                          * and a failure message is returned.
439                          */
440                         logit("Unknown packet type received after authentication: %d", type);
441                 }
442                 packet_start(success ? SSH_SMSG_SUCCESS : SSH_SMSG_FAILURE);
443                 packet_send();
444                 packet_write_wait();
445
446                 /* Enable compression now that we have replied if appropriate. */
447                 if (enable_compression_after_reply) {
448                         enable_compression_after_reply = 0;
449                         packet_start_compression(compression_level);
450                 }
451         }
452 }
453
454 #define USE_PIPES
455 /*
456  * This is called to fork and execute a command when we have no tty.  This
457  * will call do_child from the child, and server_loop from the parent after
458  * setting up file descriptors and such.
459  */
460 int
461 do_exec_no_pty(Session *s, const char *command)
462 {
463         pid_t pid;
464
465 #ifdef USE_PIPES
466         int pin[2], pout[2], perr[2];
467
468         /* Allocate pipes for communicating with the program. */
469         if (pipe(pin) < 0) {
470                 error("%s: pipe in: %.100s", __func__, strerror(errno));
471                 return -1;
472         }
473         if (pipe(pout) < 0) {
474                 error("%s: pipe out: %.100s", __func__, strerror(errno));
475                 close(pin[0]);
476                 close(pin[1]);
477                 return -1;
478         }
479         if (pipe(perr) < 0) {
480                 error("%s: pipe err: %.100s", __func__, strerror(errno));
481                 close(pin[0]);
482                 close(pin[1]);
483                 close(pout[0]);
484                 close(pout[1]);
485                 return -1;
486         }
487 #else
488         int inout[2], err[2];
489
490         /* Uses socket pairs to communicate with the program. */
491         if (socketpair(AF_UNIX, SOCK_STREAM, 0, inout) < 0) {
492                 error("%s: socketpair #1: %.100s", __func__, strerror(errno));
493                 return -1;
494         }
495         if (socketpair(AF_UNIX, SOCK_STREAM, 0, err) < 0) {
496                 error("%s: socketpair #2: %.100s", __func__, strerror(errno));
497                 close(inout[0]);
498                 close(inout[1]);
499                 return -1;
500         }
501 #endif
502
503         if (s == NULL)
504                 fatal("do_exec_no_pty: no session");
505
506         session_proctitle(s);
507
508         /* Fork the child. */
509         switch ((pid = fork())) {
510         case -1:
511                 error("%s: fork: %.100s", __func__, strerror(errno));
512 #ifdef USE_PIPES
513                 close(pin[0]);
514                 close(pin[1]);
515                 close(pout[0]);
516                 close(pout[1]);
517                 close(perr[0]);
518                 close(perr[1]);
519 #else
520                 close(inout[0]);
521                 close(inout[1]);
522                 close(err[0]);
523                 close(err[1]);
524 #endif
525                 return -1;
526         case 0:
527                 is_child = 1;
528
529                 /* Child.  Reinitialize the log since the pid has changed. */
530                 log_init(__progname, options.log_level,
531                     options.log_facility, log_stderr);
532
533                 /*
534                  * Create a new session and process group since the 4.4BSD
535                  * setlogin() affects the entire process group.
536                  */
537                 if (setsid() < 0)
538                         error("setsid failed: %.100s", strerror(errno));
539
540 #ifdef USE_PIPES
541                 /*
542                  * Redirect stdin.  We close the parent side of the socket
543                  * pair, and make the child side the standard input.
544                  */
545                 close(pin[1]);
546                 if (dup2(pin[0], 0) < 0)
547                         perror("dup2 stdin");
548                 close(pin[0]);
549
550                 /* Redirect stdout. */
551                 close(pout[0]);
552                 if (dup2(pout[1], 1) < 0)
553                         perror("dup2 stdout");
554                 close(pout[1]);
555
556                 /* Redirect stderr. */
557                 close(perr[0]);
558                 if (dup2(perr[1], 2) < 0)
559                         perror("dup2 stderr");
560                 close(perr[1]);
561 #else
562                 /*
563                  * Redirect stdin, stdout, and stderr.  Stdin and stdout will
564                  * use the same socket, as some programs (particularly rdist)
565                  * seem to depend on it.
566                  */
567                 close(inout[1]);
568                 close(err[1]);
569                 if (dup2(inout[0], 0) < 0)      /* stdin */
570                         perror("dup2 stdin");
571                 if (dup2(inout[0], 1) < 0)      /* stdout (same as stdin) */
572                         perror("dup2 stdout");
573                 close(inout[0]);
574                 if (dup2(err[0], 2) < 0)        /* stderr */
575                         perror("dup2 stderr");
576                 close(err[0]);
577 #endif
578
579
580 #ifdef _UNICOS
581                 cray_init_job(s->pw); /* set up cray jid and tmpdir */
582 #endif
583
584                 /* Do processing for the child (exec command etc). */
585                 do_child(s, command);
586                 /* NOTREACHED */
587         default:
588                 break;
589         }
590
591 #ifdef _UNICOS
592         signal(WJSIGNAL, cray_job_termination_handler);
593 #endif /* _UNICOS */
594 #ifdef HAVE_CYGWIN
595         cygwin_set_impersonation_token(INVALID_HANDLE_VALUE);
596 #endif
597
598         s->pid = pid;
599         /* Set interactive/non-interactive mode. */
600         packet_set_interactive(s->display != NULL);
601
602         /*
603          * Clear loginmsg, since it's the child's responsibility to display
604          * it to the user, otherwise multiple sessions may accumulate
605          * multiple copies of the login messages.
606          */
607         buffer_clear(&loginmsg);
608
609 #ifdef USE_PIPES
610         /* We are the parent.  Close the child sides of the pipes. */
611         close(pin[0]);
612         close(pout[1]);
613         close(perr[1]);
614
615         if (compat20) {
616                 if (s->is_subsystem) {
617                         close(perr[0]);
618                         perr[0] = -1;
619                 }
620                 session_set_fds(s, pin[1], pout[0], perr[0], 0);
621         } else {
622                 /* Enter the interactive session. */
623                 server_loop(pid, pin[1], pout[0], perr[0]);
624                 /* server_loop has closed pin[1], pout[0], and perr[0]. */
625         }
626 #else
627         /* We are the parent.  Close the child sides of the socket pairs. */
628         close(inout[0]);
629         close(err[0]);
630
631         /*
632          * Enter the interactive session.  Note: server_loop must be able to
633          * handle the case that fdin and fdout are the same.
634          */
635         if (compat20) {
636                 session_set_fds(s, inout[1], inout[1],
637                     s->is_subsystem ? -1 : err[1], 0);
638                 if (s->is_subsystem)
639                         close(err[1]);
640         } else {
641                 server_loop(pid, inout[1], inout[1], err[1]);
642                 /* server_loop has closed inout[1] and err[1]. */
643         }
644 #endif
645         return 0;
646 }
647
648 /*
649  * This is called to fork and execute a command when we have a tty.  This
650  * will call do_child from the child, and server_loop from the parent after
651  * setting up file descriptors, controlling tty, updating wtmp, utmp,
652  * lastlog, and other such operations.
653  */
654 int
655 do_exec_pty(Session *s, const char *command)
656 {
657         int fdout, ptyfd, ttyfd, ptymaster;
658         pid_t pid;
659
660         if (s == NULL)
661                 fatal("do_exec_pty: no session");
662         ptyfd = s->ptyfd;
663         ttyfd = s->ttyfd;
664
665         /*
666          * Create another descriptor of the pty master side for use as the
667          * standard input.  We could use the original descriptor, but this
668          * simplifies code in server_loop.  The descriptor is bidirectional.
669          * Do this before forking (and cleanup in the child) so as to
670          * detect and gracefully fail out-of-fd conditions.
671          */
672         if ((fdout = dup(ptyfd)) < 0) {
673                 error("%s: dup #1: %s", __func__, strerror(errno));
674                 close(ttyfd);
675                 close(ptyfd);
676                 return -1;
677         }
678         /* we keep a reference to the pty master */
679         if ((ptymaster = dup(ptyfd)) < 0) {
680                 error("%s: dup #2: %s", __func__, strerror(errno));
681                 close(ttyfd);
682                 close(ptyfd);
683                 close(fdout);
684                 return -1;
685         }
686
687         /* Fork the child. */
688         switch ((pid = fork())) {
689         case -1:
690                 error("%s: fork: %.100s", __func__, strerror(errno));
691                 close(fdout);
692                 close(ptymaster);
693                 close(ttyfd);
694                 close(ptyfd);
695                 return -1;
696         case 0:
697                 is_child = 1;
698
699                 close(fdout);
700                 close(ptymaster);
701
702                 /* Child.  Reinitialize the log because the pid has changed. */
703                 log_init(__progname, options.log_level,
704                     options.log_facility, log_stderr);
705                 /* Close the master side of the pseudo tty. */
706                 close(ptyfd);
707
708                 /* Make the pseudo tty our controlling tty. */
709                 pty_make_controlling_tty(&ttyfd, s->tty);
710
711                 /* Redirect stdin/stdout/stderr from the pseudo tty. */
712                 if (dup2(ttyfd, 0) < 0)
713                         error("dup2 stdin: %s", strerror(errno));
714                 if (dup2(ttyfd, 1) < 0)
715                         error("dup2 stdout: %s", strerror(errno));
716                 if (dup2(ttyfd, 2) < 0)
717                         error("dup2 stderr: %s", strerror(errno));
718
719                 /* Close the extra descriptor for the pseudo tty. */
720                 close(ttyfd);
721
722                 /* record login, etc. similar to login(1) */
723 #ifndef HAVE_OSF_SIA
724                 if (!(options.use_login && command == NULL)) {
725 #ifdef _UNICOS
726                         cray_init_job(s->pw); /* set up cray jid and tmpdir */
727 #endif /* _UNICOS */
728                         do_login(s, command);
729                 }
730 # ifdef LOGIN_NEEDS_UTMPX
731                 else
732                         do_pre_login(s);
733 # endif
734 #endif
735                 /*
736                  * Do common processing for the child, such as execing
737                  * the command.
738                  */
739                 do_child(s, command);
740                 /* NOTREACHED */
741         default:
742                 break;
743         }
744
745 #ifdef _UNICOS
746         signal(WJSIGNAL, cray_job_termination_handler);
747 #endif /* _UNICOS */
748 #ifdef HAVE_CYGWIN
749         cygwin_set_impersonation_token(INVALID_HANDLE_VALUE);
750 #endif
751
752         s->pid = pid;
753
754         /* Parent.  Close the slave side of the pseudo tty. */
755         close(ttyfd);
756
757         /* Enter interactive session. */
758         s->ptymaster = ptymaster;
759         packet_set_interactive(1);
760         if (compat20) {
761                 session_set_fds(s, ptyfd, fdout, -1, 1);
762         } else {
763                 server_loop(pid, ptyfd, fdout, -1);
764                 /* server_loop _has_ closed ptyfd and fdout. */
765         }
766         return 0;
767 }
768
769 #ifdef LOGIN_NEEDS_UTMPX
770 static void
771 do_pre_login(Session *s)
772 {
773         socklen_t fromlen;
774         struct sockaddr_storage from;
775         pid_t pid = getpid();
776
777         /*
778          * Get IP address of client. If the connection is not a socket, let
779          * the address be 0.0.0.0.
780          */
781         memset(&from, 0, sizeof(from));
782         fromlen = sizeof(from);
783         if (packet_connection_is_on_socket()) {
784                 if (getpeername(packet_get_connection_in(),
785                     (struct sockaddr *)&from, &fromlen) < 0) {
786                         debug("getpeername: %.100s", strerror(errno));
787                         cleanup_exit(255);
788                 }
789         }
790
791         record_utmp_only(pid, s->tty, s->pw->pw_name,
792             get_remote_name_or_ip(utmp_len, options.use_dns),
793             (struct sockaddr *)&from, fromlen);
794 }
795 #endif
796
797 /*
798  * This is called to fork and execute a command.  If another command is
799  * to be forced, execute that instead.
800  */
801 int
802 do_exec(Session *s, const char *command)
803 {
804         int ret;
805
806         if (options.adm_forced_command) {
807                 original_command = command;
808                 command = options.adm_forced_command;
809                 if (IS_INTERNAL_SFTP(command))
810                         s->is_subsystem = SUBSYSTEM_INT_SFTP;
811                 else if (s->is_subsystem)
812                         s->is_subsystem = SUBSYSTEM_EXT;
813                 debug("Forced command (config) '%.900s'", command);
814         } else if (forced_command) {
815                 original_command = command;
816                 command = forced_command;
817                 if (IS_INTERNAL_SFTP(command))
818                         s->is_subsystem = SUBSYSTEM_INT_SFTP;
819                 else if (s->is_subsystem)
820                         s->is_subsystem = SUBSYSTEM_EXT;
821                 debug("Forced command (key option) '%.900s'", command);
822         }
823
824 #if defined(SESSION_HOOKS)
825         if (options.session_hooks_allow &&
826             (options.session_hooks_startup_cmd ||
827              options.session_hooks_shutdown_cmd))
828         {
829                 char env_file[1000];
830                 struct stat st;
831                 do
832                 {
833                         snprintf(env_file,
834                                  sizeof(env_file),
835                                  "/tmp/ssh_env_%d%d%d",
836                                  getuid(),
837                                  getpid(),
838                                  rand());
839                 } while (stat(env_file, &st)==0);
840                 s->authctxt->session_env_file = strdup(env_file);
841         }
842 #endif
843
844 #ifdef SSH_AUDIT_EVENTS
845         if (command != NULL)
846                 PRIVSEP(audit_run_command(command));
847         else if (s->ttyfd == -1) {
848                 char *shell = s->pw->pw_shell;
849
850                 if (shell[0] == '\0')   /* empty shell means /bin/sh */
851                         shell =_PATH_BSHELL;
852                 PRIVSEP(audit_run_command(shell));
853         }
854 #endif
855         if (s->ttyfd != -1)
856                 ret = do_exec_pty(s, command);
857         else
858                 ret = do_exec_no_pty(s, command);
859
860         original_command = NULL;
861
862         /*
863          * Clear loginmsg: it's the child's responsibility to display
864          * it to the user, otherwise multiple sessions may accumulate
865          * multiple copies of the login messages.
866          */
867         buffer_clear(&loginmsg);
868
869         return ret;
870 }
871
872 /* administrative, login(1)-like work */
873 void
874 do_login(Session *s, const char *command)
875 {
876         socklen_t fromlen;
877         struct sockaddr_storage from;
878         struct passwd * pw = s->pw;
879         pid_t pid = getpid();
880
881         /*
882          * Get IP address of client. If the connection is not a socket, let
883          * the address be 0.0.0.0.
884          */
885         memset(&from, 0, sizeof(from));
886         fromlen = sizeof(from);
887         if (packet_connection_is_on_socket()) {
888                 if (getpeername(packet_get_connection_in(),
889                     (struct sockaddr *)&from, &fromlen) < 0) {
890                         debug("getpeername: %.100s", strerror(errno));
891                         cleanup_exit(255);
892                 }
893         }
894
895         /* Record that there was a login on that tty from the remote host. */
896         if (!use_privsep)
897                 record_login(pid, s->tty, pw->pw_name, pw->pw_uid,
898                     get_remote_name_or_ip(utmp_len,
899                     options.use_dns),
900                     (struct sockaddr *)&from, fromlen);
901
902 #ifdef USE_PAM
903         /*
904          * If password change is needed, do it now.
905          * This needs to occur before the ~/.hushlogin check.
906          */
907         if (options.use_pam && !use_privsep && s->authctxt->force_pwchange) {
908                 display_loginmsg();
909                 do_pam_chauthtok();
910                 s->authctxt->force_pwchange = 0;
911                 /* XXX - signal [net] parent to enable forwardings */
912         }
913 #endif
914
915         if (check_quietlogin(s, command))
916                 return;
917
918         display_loginmsg();
919
920         do_motd();
921 }
922
923 /*
924  * Display the message of the day.
925  */
926 void
927 do_motd(void)
928 {
929         FILE *f;
930         char buf[256];
931
932         if (options.print_motd) {
933 #ifdef HAVE_LOGIN_CAP
934                 f = fopen(login_getcapstr(lc, "welcome", "/etc/motd",
935                     "/etc/motd"), "r");
936 #else
937                 f = fopen("/etc/motd", "r");
938 #endif
939                 if (f) {
940                         while (fgets(buf, sizeof(buf), f))
941                                 fputs(buf, stdout);
942                         fclose(f);
943                 }
944         }
945 }
946
947
948 /*
949  * Check for quiet login, either .hushlogin or command given.
950  */
951 int
952 check_quietlogin(Session *s, const char *command)
953 {
954         char buf[256];
955         struct passwd *pw = s->pw;
956         struct stat st;
957
958         /* Return 1 if .hushlogin exists or a command given. */
959         if (command != NULL)
960                 return 1;
961         snprintf(buf, sizeof(buf), "%.200s/.hushlogin", pw->pw_dir);
962 #ifdef HAVE_LOGIN_CAP
963         if (login_getcapbool(lc, "hushlogin", 0) || stat(buf, &st) >= 0)
964                 return 1;
965 #else
966         if (stat(buf, &st) >= 0)
967                 return 1;
968 #endif
969         return 0;
970 }
971
972 /*
973  * Sets the value of the given variable in the environment.  If the variable
974  * already exists, its value is overridden.
975  */
976 void
977 child_set_env(char ***envp, u_int *envsizep, const char *name,
978         const char *value)
979 {
980         char **env;
981         u_int envsize;
982         u_int i, namelen;
983
984         /*
985          * If we're passed an uninitialized list, allocate a single null
986          * entry before continuing.
987          */
988         if (*envp == NULL && *envsizep == 0) {
989                 *envp = xmalloc(sizeof(char *));
990                 *envp[0] = NULL;
991                 *envsizep = 1;
992         }
993
994         /*
995          * Find the slot where the value should be stored.  If the variable
996          * already exists, we reuse the slot; otherwise we append a new slot
997          * at the end of the array, expanding if necessary.
998          */
999         env = *envp;
1000         namelen = strlen(name);
1001         for (i = 0; env[i]; i++)
1002                 if (strncmp(env[i], name, namelen) == 0 && env[i][namelen] == '=')
1003                         break;
1004         if (env[i]) {
1005                 /* Reuse the slot. */
1006                 xfree(env[i]);
1007         } else {
1008                 /* New variable.  Expand if necessary. */
1009                 envsize = *envsizep;
1010                 if (i >= envsize - 1) {
1011                         if (envsize >= 1000)
1012                                 fatal("child_set_env: too many env vars");
1013                         envsize += 50;
1014                         env = (*envp) = xrealloc(env, envsize, sizeof(char *));
1015                         *envsizep = envsize;
1016                 }
1017                 /* Need to set the NULL pointer at end of array beyond the new slot. */
1018                 env[i + 1] = NULL;
1019         }
1020
1021         /* Allocate space and format the variable in the appropriate slot. */
1022         env[i] = xmalloc(strlen(name) + 1 + strlen(value) + 1);
1023         snprintf(env[i], strlen(name) + 1 + strlen(value) + 1, "%s=%s", name, value);
1024 }
1025
1026 /*
1027  * Reads environment variables from the given file and adds/overrides them
1028  * into the environment.  If the file does not exist, this does nothing.
1029  * Otherwise, it must consist of empty lines, comments (line starts with '#')
1030  * and assignments of the form name=value.  No other forms are allowed.
1031  */
1032 static void
1033 read_environment_file(char ***env, u_int *envsize,
1034         const char *filename)
1035 {
1036         FILE *f;
1037         char buf[4096];
1038         char *cp, *value;
1039         u_int lineno = 0;
1040
1041         f = fopen(filename, "r");
1042         if (!f)
1043                 return;
1044
1045         while (fgets(buf, sizeof(buf), f)) {
1046                 if (++lineno > 1000)
1047                         fatal("Too many lines in environment file %s", filename);
1048                 for (cp = buf; *cp == ' ' || *cp == '\t'; cp++)
1049                         ;
1050                 if (!*cp || *cp == '#' || *cp == '\n')
1051                         continue;
1052
1053                 cp[strcspn(cp, "\n")] = '\0';
1054
1055                 value = strchr(cp, '=');
1056                 if (value == NULL) {
1057                         fprintf(stderr, "Bad line %u in %.100s\n", lineno,
1058                             filename);
1059                         continue;
1060                 }
1061                 /*
1062                  * Replace the equals sign by nul, and advance value to
1063                  * the value string.
1064                  */
1065                 *value = '\0';
1066                 value++;
1067                 child_set_env(env, envsize, cp, value);
1068         }
1069         fclose(f);
1070 }
1071
1072 #ifdef SESSION_HOOKS
1073 #define SSH_SESSION_ENV_FILE "SSH_SESSION_ENV_FILE"
1074
1075 typedef enum { no_op, execute, clear_env, restore_env,
1076                read_env, save_or_rm_env } session_action_t;
1077
1078 static session_action_t action_order[2][5] = {
1079     { clear_env, read_env, execute, save_or_rm_env, restore_env }, /*shutdown*/
1080     { execute, read_env, save_or_rm_env, no_op, no_op }            /*startup */
1081 };
1082
1083 static
1084 void execute_session_hook(char* prog, Authctxt *authctxt,
1085                           int startup, int save)
1086 {
1087     extern char **environ;
1088
1089     struct stat  st;
1090     char         **saved_env, **tmpenv;
1091     char         *env_file = authctxt->session_env_file;
1092     int          i, status = 0;
1093
1094     for (i=0; i<5; i++)
1095     {
1096         switch (action_order[startup][i])
1097         {
1098           case no_op:
1099             break;
1100
1101           case execute:
1102             {
1103                 FILE* fp;
1104                 char  buf[1000];
1105
1106                 snprintf(buf,
1107                          sizeof(buf),
1108                          "%s -c '%s'",
1109                          authctxt->pw->pw_shell,
1110                          prog);
1111
1112                 debug("executing session hook: [%s]", buf);
1113                 setenv(SSH_SESSION_ENV_FILE, env_file, /* overwrite = */ 1);
1114
1115                 /* flusing is recommended in the popen(3) man page, to avoid
1116                    intermingling of output */
1117                 fflush(stdout);
1118                 fflush(stderr);
1119                 if ((fp=popen(buf, "w")) == NULL)
1120                 {
1121                     perror("Unable to run session hook");
1122                     return;
1123                 }
1124                 status = pclose(fp);
1125                 debug2("session hook executed, status=%d", status);
1126                 unsetenv(SSH_SESSION_ENV_FILE);
1127             }
1128             break;
1129
1130           case clear_env:
1131             saved_env = environ;
1132             tmpenv = (char**) malloc(sizeof(char*));
1133             tmpenv[0] = NULL;
1134             environ = tmpenv;
1135             break;
1136
1137           case restore_env:
1138             environ = saved_env;
1139             free(tmpenv);
1140             break;
1141
1142           case read_env:
1143             if (status==0 && stat(env_file, &st)==0)
1144             {
1145                 int envsize = 0;
1146
1147                 debug("reading environment from %s", env_file);
1148                 while (environ[envsize++]) ;
1149                 read_environment_file(&environ, &envsize, env_file);
1150             }
1151             break;
1152
1153           case save_or_rm_env:
1154             if (status==0 && save)
1155             {
1156                 FILE* fp;
1157                 int    envcount=0;
1158
1159                 debug2("saving environment to %s", env_file);
1160                 if ((fp = fopen(env_file, "w")) == NULL) /* hmm: file perms? */
1161                 {
1162                     perror("Unable to save session hook info");
1163                 }
1164                 while (environ[envcount])
1165                 {
1166                     fprintf(fp, "%s\n", environ[envcount++]);
1167                 }
1168                 fflush(fp);
1169                 fclose(fp);
1170             }
1171             else if (stat(env_file, &st)==0)
1172             {
1173                 debug2("removing environment file %s", env_file);
1174                 remove(env_file);
1175             }
1176             break;
1177         }
1178     }
1179
1180 }
1181 #endif
1182
1183 #ifdef HAVE_ETC_DEFAULT_LOGIN
1184 /*
1185  * Return named variable from specified environment, or NULL if not present.
1186  */
1187 static char *
1188 child_get_env(char **env, const char *name)
1189 {
1190         int i;
1191         size_t len;
1192
1193         len = strlen(name);
1194         for (i=0; env[i] != NULL; i++)
1195                 if (strncmp(name, env[i], len) == 0 && env[i][len] == '=')
1196                         return(env[i] + len + 1);
1197         return NULL;
1198 }
1199
1200 /*
1201  * Read /etc/default/login.
1202  * We pick up the PATH (or SUPATH for root) and UMASK.
1203  */
1204 static void
1205 read_etc_default_login(char ***env, u_int *envsize, uid_t uid)
1206 {
1207         char **tmpenv = NULL, *var;
1208         u_int i, tmpenvsize = 0;
1209         u_long mask;
1210
1211         /*
1212          * We don't want to copy the whole file to the child's environment,
1213          * so we use a temporary environment and copy the variables we're
1214          * interested in.
1215          */
1216         read_environment_file(&tmpenv, &tmpenvsize, "/etc/default/login");
1217
1218         if (tmpenv == NULL)
1219                 return;
1220
1221         if (uid == 0)
1222                 var = child_get_env(tmpenv, "SUPATH");
1223         else
1224                 var = child_get_env(tmpenv, "PATH");
1225         if (var != NULL)
1226                 child_set_env(env, envsize, "PATH", var);
1227
1228         if ((var = child_get_env(tmpenv, "UMASK")) != NULL)
1229                 if (sscanf(var, "%5lo", &mask) == 1)
1230                         umask((mode_t)mask);
1231
1232         for (i = 0; tmpenv[i] != NULL; i++)
1233                 xfree(tmpenv[i]);
1234         xfree(tmpenv);
1235 }
1236 #endif /* HAVE_ETC_DEFAULT_LOGIN */
1237
1238 void
1239 copy_environment(char **source, char ***env, u_int *envsize)
1240 {
1241         char *var_name, *var_val;
1242         int i;
1243
1244         if (source == NULL)
1245                 return;
1246
1247         for(i = 0; source[i] != NULL; i++) {
1248                 var_name = xstrdup(source[i]);
1249                 if ((var_val = strstr(var_name, "=")) == NULL) {
1250                         xfree(var_name);
1251                         continue;
1252                 }
1253                 *var_val++ = '\0';
1254
1255                 debug3("Copy environment: %s=%s", var_name, var_val);
1256                 child_set_env(env, envsize, var_name, var_val);
1257
1258                 xfree(var_name);
1259         }
1260 }
1261
1262 static char **
1263 do_setup_env(Session *s, const char *shell)
1264 {
1265         char buf[256];
1266         u_int i, envsize;
1267         char **env, *laddr;
1268         struct passwd *pw = s->pw;
1269 #if !defined (HAVE_LOGIN_CAP) && !defined (HAVE_CYGWIN)
1270         char *path = NULL;
1271 #endif
1272
1273         /* Initialize the environment. */
1274         envsize = 100;
1275         env = xcalloc(envsize, sizeof(char *));
1276         env[0] = NULL;
1277
1278 #ifdef HAVE_CYGWIN
1279         /*
1280          * The Windows environment contains some setting which are
1281          * important for a running system. They must not be dropped.
1282          */
1283         {
1284                 char **p;
1285
1286                 p = fetch_windows_environment();
1287                 copy_environment(p, &env, &envsize);
1288                 free_windows_environment(p);
1289         }
1290 #endif
1291
1292 #ifdef GSSAPI
1293         /* Allow any GSSAPI methods that we've used to alter
1294          * the childs environment as they see fit
1295          */
1296         ssh_gssapi_do_child(&env, &envsize);
1297 #endif
1298
1299         if (!options.use_login) {
1300                 /* Set basic environment. */
1301                 for (i = 0; i < s->num_env; i++)
1302                         child_set_env(&env, &envsize, s->env[i].name,
1303                             s->env[i].val);
1304
1305                 child_set_env(&env, &envsize, "USER", pw->pw_name);
1306                 child_set_env(&env, &envsize, "LOGNAME", pw->pw_name);
1307 #ifdef _AIX
1308                 child_set_env(&env, &envsize, "LOGIN", pw->pw_name);
1309 #endif
1310                 child_set_env(&env, &envsize, "HOME", pw->pw_dir);
1311 #ifdef HAVE_LOGIN_CAP
1312                 if (setusercontext(lc, pw, pw->pw_uid, LOGIN_SETPATH) < 0)
1313                         child_set_env(&env, &envsize, "PATH", _PATH_STDPATH);
1314                 else
1315                         child_set_env(&env, &envsize, "PATH", getenv("PATH"));
1316 #else /* HAVE_LOGIN_CAP */
1317 # ifndef HAVE_CYGWIN
1318                 /*
1319                  * There's no standard path on Windows. The path contains
1320                  * important components pointing to the system directories,
1321                  * needed for loading shared libraries. So the path better
1322                  * remains intact here.
1323                  */
1324 #  ifdef HAVE_ETC_DEFAULT_LOGIN
1325                 read_etc_default_login(&env, &envsize, pw->pw_uid);
1326                 path = child_get_env(env, "PATH");
1327 #  endif /* HAVE_ETC_DEFAULT_LOGIN */
1328                 if (path == NULL || *path == '\0') {
1329                         child_set_env(&env, &envsize, "PATH",
1330                             s->pw->pw_uid == 0 ?
1331                                 SUPERUSER_PATH : _PATH_STDPATH);
1332                 }
1333 # endif /* HAVE_CYGWIN */
1334 #endif /* HAVE_LOGIN_CAP */
1335
1336                 snprintf(buf, sizeof buf, "%.200s/%.50s",
1337                          _PATH_MAILDIR, pw->pw_name);
1338                 child_set_env(&env, &envsize, "MAIL", buf);
1339
1340                 /* Normal systems set SHELL by default. */
1341                 child_set_env(&env, &envsize, "SHELL", shell);
1342         }
1343         if (getenv("TZ"))
1344                 child_set_env(&env, &envsize, "TZ", getenv("TZ"));
1345
1346 #ifdef GSI /* GSI shared libs typically installed in non-system locations. */
1347         {
1348                 char *cp;
1349
1350                 if ((cp = getenv("LD_LIBRARY_PATH")) != NULL)
1351                         child_set_env(&env, &envsize, "LD_LIBRARY_PATH", cp);
1352                 if ((cp = getenv("LIBPATH")) != NULL)
1353                         child_set_env(&env, &envsize, "LIBPATH", cp);
1354                 if ((cp = getenv("SHLIB_PATH")) != NULL)
1355                         child_set_env(&env, &envsize, "SHLIB_PATH", cp);
1356                 if ((cp = getenv("LD_LIBRARYN32_PATH")) != NULL)
1357                         child_set_env(&env, &envsize, "LD_LIBRARYN32_PATH",cp);
1358                 if ((cp = getenv("LD_LIBRARY64_PATH")) != NULL)
1359                         child_set_env(&env, &envsize, "LD_LIBRARY64_PATH",cp);
1360         }
1361 #endif
1362
1363         /* Set custom environment options from RSA authentication. */
1364         if (!options.use_login) {
1365                 while (custom_environment) {
1366                         struct envstring *ce = custom_environment;
1367                         char *str = ce->s;
1368
1369                         for (i = 0; str[i] != '=' && str[i]; i++)
1370                                 ;
1371                         if (str[i] == '=') {
1372                                 str[i] = 0;
1373                                 child_set_env(&env, &envsize, str, str + i + 1);
1374                         }
1375                         custom_environment = ce->next;
1376                         xfree(ce->s);
1377                         xfree(ce);
1378                 }
1379         }
1380
1381         /* SSH_CLIENT deprecated */
1382         snprintf(buf, sizeof buf, "%.50s %d %d",
1383             get_remote_ipaddr(), get_remote_port(), get_local_port());
1384         child_set_env(&env, &envsize, "SSH_CLIENT", buf);
1385
1386         laddr = get_local_ipaddr(packet_get_connection_in());
1387         snprintf(buf, sizeof buf, "%.50s %d %.50s %d",
1388             get_remote_ipaddr(), get_remote_port(), laddr, get_local_port());
1389         xfree(laddr);
1390         child_set_env(&env, &envsize, "SSH_CONNECTION", buf);
1391
1392         if (s->ttyfd != -1)
1393                 child_set_env(&env, &envsize, "SSH_TTY", s->tty);
1394         if (s->term)
1395                 child_set_env(&env, &envsize, "TERM", s->term);
1396         if (s->display)
1397                 child_set_env(&env, &envsize, "DISPLAY", s->display);
1398         if (original_command)
1399                 child_set_env(&env, &envsize, "SSH_ORIGINAL_COMMAND",
1400                     original_command);
1401
1402 #ifdef _UNICOS
1403         if (cray_tmpdir[0] != '\0')
1404                 child_set_env(&env, &envsize, "TMPDIR", cray_tmpdir);
1405 #endif /* _UNICOS */
1406
1407         /*
1408          * Since we clear KRB5CCNAME at startup, if it's set now then it
1409          * must have been set by a native authentication method (eg AIX or
1410          * SIA), so copy it to the child.
1411          */
1412         {
1413                 char *cp;
1414
1415                 if ((cp = getenv("KRB5CCNAME")) != NULL)
1416                         child_set_env(&env, &envsize, "KRB5CCNAME", cp);
1417         }
1418
1419 #ifdef _AIX
1420         {
1421                 char *cp;
1422
1423                 if ((cp = getenv("AUTHSTATE")) != NULL)
1424                         child_set_env(&env, &envsize, "AUTHSTATE", cp);
1425                 read_environment_file(&env, &envsize, "/etc/environment");
1426         }
1427 #endif
1428 #ifdef KRB5
1429         if (s->authctxt->krb5_ccname)
1430                 child_set_env(&env, &envsize, "KRB5CCNAME",
1431                     s->authctxt->krb5_ccname);
1432 #endif
1433 #ifdef USE_PAM
1434         /*
1435          * Pull in any environment variables that may have
1436          * been set by PAM.
1437          */
1438         if (options.use_pam) {
1439                 char **p;
1440
1441                 p = fetch_pam_child_environment();
1442                 copy_environment(p, &env, &envsize);
1443                 free_pam_environment(p);
1444
1445                 p = fetch_pam_environment();
1446                 copy_environment(p, &env, &envsize);
1447                 free_pam_environment(p);
1448         }
1449 #endif /* USE_PAM */
1450
1451         if (auth_sock_name != NULL)
1452                 child_set_env(&env, &envsize, SSH_AUTHSOCKET_ENV_NAME,
1453                     auth_sock_name);
1454
1455         /* read $HOME/.ssh/environment. */
1456         if (options.permit_user_env && !options.use_login) {
1457                 snprintf(buf, sizeof buf, "%.200s/.ssh/environment",
1458                     strcmp(pw->pw_dir, "/") ? pw->pw_dir : "");
1459                 read_environment_file(&env, &envsize, buf);
1460         }
1461         if (debug_flag) {
1462                 /* dump the environment */
1463                 fprintf(stderr, "Environment:\n");
1464                 for (i = 0; env[i]; i++)
1465                         fprintf(stderr, "  %.200s\n", env[i]);
1466         }
1467         return env;
1468 }
1469
1470 /*
1471  * Run $HOME/.ssh/rc, /etc/ssh/sshrc, or xauth (whichever is found
1472  * first in this order).
1473  */
1474 static void
1475 do_rc_files(Session *s, const char *shell)
1476 {
1477         FILE *f = NULL;
1478         char cmd[1024];
1479         int do_xauth;
1480         struct stat st;
1481
1482         do_xauth =
1483             s->display != NULL && s->auth_proto != NULL && s->auth_data != NULL;
1484
1485         /* ignore _PATH_SSH_USER_RC for subsystems and admin forced commands */
1486         if (!s->is_subsystem && options.adm_forced_command == NULL &&
1487             !no_user_rc && stat(_PATH_SSH_USER_RC, &st) >= 0) {
1488                 snprintf(cmd, sizeof cmd, "%s -c '%s %s'",
1489                     shell, _PATH_BSHELL, _PATH_SSH_USER_RC);
1490                 if (debug_flag)
1491                         fprintf(stderr, "Running %s\n", cmd);
1492                 f = popen(cmd, "w");
1493                 if (f) {
1494                         if (do_xauth)
1495                                 fprintf(f, "%s %s\n", s->auth_proto,
1496                                     s->auth_data);
1497                         pclose(f);
1498                 } else
1499                         fprintf(stderr, "Could not run %s\n",
1500                             _PATH_SSH_USER_RC);
1501         } else if (stat(_PATH_SSH_SYSTEM_RC, &st) >= 0) {
1502                 if (debug_flag)
1503                         fprintf(stderr, "Running %s %s\n", _PATH_BSHELL,
1504                             _PATH_SSH_SYSTEM_RC);
1505                 f = popen(_PATH_BSHELL " " _PATH_SSH_SYSTEM_RC, "w");
1506                 if (f) {
1507                         if (do_xauth)
1508                                 fprintf(f, "%s %s\n", s->auth_proto,
1509                                     s->auth_data);
1510                         pclose(f);
1511                 } else
1512                         fprintf(stderr, "Could not run %s\n",
1513                             _PATH_SSH_SYSTEM_RC);
1514         } else if (do_xauth && options.xauth_location != NULL) {
1515                 /* Add authority data to .Xauthority if appropriate. */
1516                 if (debug_flag) {
1517                         fprintf(stderr,
1518                             "Running %.500s remove %.100s\n",
1519                             options.xauth_location, s->auth_display);
1520                         fprintf(stderr,
1521                             "%.500s add %.100s %.100s %.100s\n",
1522                             options.xauth_location, s->auth_display,
1523                             s->auth_proto, s->auth_data);
1524                 }
1525                 snprintf(cmd, sizeof cmd, "%s -q -",
1526                     options.xauth_location);
1527                 f = popen(cmd, "w");
1528                 if (f) {
1529                         fprintf(f, "remove %s\n",
1530                             s->auth_display);
1531                         fprintf(f, "add %s %s %s\n",
1532                             s->auth_display, s->auth_proto,
1533                             s->auth_data);
1534                         pclose(f);
1535                 } else {
1536                         fprintf(stderr, "Could not run %s\n",
1537                             cmd);
1538                 }
1539         }
1540 }
1541
1542 static void
1543 do_nologin(struct passwd *pw)
1544 {
1545         FILE *f = NULL;
1546         char buf[1024];
1547
1548 #ifdef HAVE_LOGIN_CAP
1549         if (!login_getcapbool(lc, "ignorenologin", 0) && pw->pw_uid)
1550                 f = fopen(login_getcapstr(lc, "nologin", _PATH_NOLOGIN,
1551                     _PATH_NOLOGIN), "r");
1552 #else
1553         if (pw->pw_uid)
1554                 f = fopen(_PATH_NOLOGIN, "r");
1555 #endif
1556         if (f) {
1557                 /* /etc/nologin exists.  Print its contents and exit. */
1558                 logit("User %.100s not allowed because %s exists",
1559                     pw->pw_name, _PATH_NOLOGIN);
1560                 while (fgets(buf, sizeof(buf), f))
1561                         fputs(buf, stderr);
1562                 fclose(f);
1563                 fflush(NULL);
1564                 exit(254);
1565         }
1566 }
1567
1568 /*
1569  * Chroot into a directory after checking it for safety: all path components
1570  * must be root-owned directories with strict permissions.
1571  */
1572 static void
1573 safely_chroot(const char *path, uid_t uid)
1574 {
1575         const char *cp;
1576         char component[MAXPATHLEN];
1577         struct stat st;
1578
1579         if (*path != '/')
1580                 fatal("chroot path does not begin at root");
1581         if (strlen(path) >= sizeof(component))
1582                 fatal("chroot path too long");
1583
1584         /*
1585          * Descend the path, checking that each component is a
1586          * root-owned directory with strict permissions.
1587          */
1588         for (cp = path; cp != NULL;) {
1589                 if ((cp = strchr(cp, '/')) == NULL)
1590                         strlcpy(component, path, sizeof(component));
1591                 else {
1592                         cp++;
1593                         memcpy(component, path, cp - path);
1594                         component[cp - path] = '\0';
1595                 }
1596         
1597                 debug3("%s: checking '%s'", __func__, component);
1598
1599                 if (stat(component, &st) != 0)
1600                         fatal("%s: stat(\"%s\"): %s", __func__,
1601                             component, strerror(errno));
1602                 if (st.st_uid != 0 || (st.st_mode & 022) != 0)
1603                         fatal("bad ownership or modes for chroot "
1604                             "directory %s\"%s\"", 
1605                             cp == NULL ? "" : "component ", component);
1606                 if (!S_ISDIR(st.st_mode))
1607                         fatal("chroot path %s\"%s\" is not a directory",
1608                             cp == NULL ? "" : "component ", component);
1609
1610         }
1611
1612         if (chdir(path) == -1)
1613                 fatal("Unable to chdir to chroot path \"%s\": "
1614                     "%s", path, strerror(errno));
1615         if (chroot(path) == -1)
1616                 fatal("chroot(\"%s\"): %s", path, strerror(errno));
1617         if (chdir("/") == -1)
1618                 fatal("%s: chdir(/) after chroot: %s",
1619                     __func__, strerror(errno));
1620         verbose("Changed root directory to \"%s\"", path);
1621 }
1622
1623 /* Set login name, uid, gid, and groups. */
1624 void
1625 do_setusercontext(struct passwd *pw)
1626 {
1627         char *chroot_path, *tmp;
1628
1629 #ifdef WITH_SELINUX
1630         /* Cache selinux status for later use */
1631         (void)ssh_selinux_enabled();
1632 #endif
1633
1634 #ifndef HAVE_CYGWIN
1635         if (getuid() == 0 || geteuid() == 0)
1636 #endif /* HAVE_CYGWIN */
1637         {
1638 #ifdef HAVE_LOGIN_CAP
1639 # ifdef __bsdi__
1640                 setpgid(0, 0);
1641 # endif
1642 # ifdef USE_PAM
1643                 if (options.use_pam) {
1644                         do_pam_setcred(use_privsep);
1645                 }
1646 # endif /* USE_PAM */
1647                 if (setusercontext(lc, pw, pw->pw_uid,
1648                     (LOGIN_SETALL & ~(LOGIN_SETPATH|LOGIN_SETUSER))) < 0) {
1649                         perror("unable to set user context");
1650                         exit(1);
1651                 }
1652 #else
1653 # if defined(HAVE_GETLUID) && defined(HAVE_SETLUID)
1654                 /* Sets login uid for accounting */
1655                 if (getluid() == -1 && setluid(pw->pw_uid) == -1)
1656                         error("setluid: %s", strerror(errno));
1657 # endif /* defined(HAVE_GETLUID) && defined(HAVE_SETLUID) */
1658
1659                 if (setlogin(pw->pw_name) < 0)
1660                         error("setlogin failed: %s", strerror(errno));
1661                 if (setgid(pw->pw_gid) < 0) {
1662                         perror("setgid");
1663                         exit(1);
1664                 }
1665                 /* Initialize the group list. */
1666                 if (initgroups(pw->pw_name, pw->pw_gid) < 0) {
1667                         perror("initgroups");
1668                         exit(1);
1669                 }
1670                 endgrent();
1671 # ifdef USE_PAM
1672                 /*
1673                  * PAM credentials may take the form of supplementary groups.
1674                  * These will have been wiped by the above initgroups() call.
1675                  * Reestablish them here.
1676                  */
1677                 if (options.use_pam) {
1678                         do_pam_setcred(use_privsep);
1679                 }
1680 # endif /* USE_PAM */
1681 # if defined(WITH_IRIX_PROJECT) || defined(WITH_IRIX_JOBS) || defined(WITH_IRIX_ARRAY)
1682                 irix_setusercontext(pw);
1683 # endif /* defined(WITH_IRIX_PROJECT) || defined(WITH_IRIX_JOBS) || defined(WITH_IRIX_ARRAY) */
1684 # ifdef _AIX
1685                 aix_usrinfo(pw);
1686 # endif /* _AIX */
1687 # ifdef USE_LIBIAF
1688                 if (set_id(pw->pw_name) != 0) {
1689                         exit(1);
1690                 }
1691 # endif /* USE_LIBIAF */
1692 #endif
1693
1694                 if (options.chroot_directory != NULL &&
1695                     strcasecmp(options.chroot_directory, "none") != 0) {
1696                         tmp = tilde_expand_filename(options.chroot_directory,
1697                             pw->pw_uid);
1698                         chroot_path = percent_expand(tmp, "h", pw->pw_dir,
1699                             "u", pw->pw_name, (char *)NULL);
1700                         safely_chroot(chroot_path, pw->pw_uid);
1701                         free(tmp);
1702                         free(chroot_path);
1703                 }
1704
1705 #ifdef HAVE_SETPCRED
1706                 if (setpcred(pw->pw_name, (char **)NULL) == -1)
1707                         fatal("Failed to set process credentials");
1708 #endif /* HAVE_SETPCRED */
1709 #ifdef HAVE_LOGIN_CAP
1710                 if (setusercontext(lc, pw, pw->pw_uid, LOGIN_SETUSER) < 0) {
1711                         perror("unable to set user context (setuser)");
1712                         exit(1);
1713                 }
1714 #else
1715                 /* Permanently switch to the desired uid. */
1716                 permanently_set_uid(pw);
1717 #endif
1718         }
1719
1720         if (getuid() != pw->pw_uid || geteuid() != pw->pw_uid)
1721                 fatal("Failed to set uids to %u.", (u_int) pw->pw_uid);
1722
1723 #ifdef WITH_SELINUX
1724         ssh_selinux_setup_exec_context(pw->pw_name);
1725 #endif
1726 }
1727
1728 static void
1729 do_pwchange(Session *s)
1730 {
1731         fflush(NULL);
1732         fprintf(stderr, "WARNING: Your password has expired.\n");
1733         if (s->ttyfd != -1) {
1734                 fprintf(stderr,
1735                     "You must change your password now and login again!\n");
1736 #ifdef PASSWD_NEEDS_USERNAME
1737                 execl(_PATH_PASSWD_PROG, "passwd", s->pw->pw_name,
1738                     (char *)NULL);
1739 #else
1740                 execl(_PATH_PASSWD_PROG, "passwd", (char *)NULL);
1741 #endif
1742                 perror("passwd");
1743         } else {
1744                 fprintf(stderr,
1745                     "Password change required but no TTY available.\n");
1746         }
1747         exit(1);
1748 }
1749
1750 static void
1751 launch_login(struct passwd *pw, const char *hostname)
1752 {
1753         /* Launch login(1). */
1754
1755         execl(LOGIN_PROGRAM, "login", "-h", hostname,
1756 #ifdef xxxLOGIN_NEEDS_TERM
1757                     (s->term ? s->term : "unknown"),
1758 #endif /* LOGIN_NEEDS_TERM */
1759 #ifdef LOGIN_NO_ENDOPT
1760             "-p", "-f", pw->pw_name, (char *)NULL);
1761 #else
1762             "-p", "-f", "--", pw->pw_name, (char *)NULL);
1763 #endif
1764
1765         /* Login couldn't be executed, die. */
1766
1767         perror("login");
1768         exit(1);
1769 }
1770
1771 static void
1772 child_close_fds(void)
1773 {
1774         int i;
1775
1776         if (packet_get_connection_in() == packet_get_connection_out())
1777                 close(packet_get_connection_in());
1778         else {
1779                 close(packet_get_connection_in());
1780                 close(packet_get_connection_out());
1781         }
1782         /*
1783          * Close all descriptors related to channels.  They will still remain
1784          * open in the parent.
1785          */
1786         /* XXX better use close-on-exec? -markus */
1787         channel_close_all();
1788
1789         /*
1790          * Close any extra file descriptors.  Note that there may still be
1791          * descriptors left by system functions.  They will be closed later.
1792          */
1793         endpwent();
1794
1795         /*
1796          * Close any extra open file descriptors so that we don't have them
1797          * hanging around in clients.  Note that we want to do this after
1798          * initgroups, because at least on Solaris 2.3 it leaves file
1799          * descriptors open.
1800          */
1801         for (i = 3; i < 64; i++)
1802                 close(i);
1803 }
1804
1805 /*
1806  * Performs common processing for the child, such as setting up the
1807  * environment, closing extra file descriptors, setting the user and group
1808  * ids, and executing the command or shell.
1809  */
1810 #define ARGV_MAX 10
1811 void
1812 do_child(Session *s, const char *command)
1813 {
1814         extern char **environ;
1815         char **env;
1816         char *argv[ARGV_MAX];
1817         const char *shell, *shell0, *hostname = NULL;
1818         struct passwd *pw = s->pw;
1819         int r = 0;
1820
1821 #ifdef AFS_KRB5
1822 /* Default place to look for aklog. */
1823 #ifdef AKLOG_PATH
1824 #define KPROGDIR AKLOG_PATH
1825 #else
1826 #define KPROGDIR "/usr/bin/aklog"
1827 #endif /* AKLOG_PATH */
1828
1829         struct stat st;
1830         char *aklog_path;
1831 #endif /* AFS_KRB5 */
1832
1833         /* remove hostkey from the child's memory */
1834         destroy_sensitive_data();
1835
1836         /* Force a password change */
1837         if (s->authctxt->force_pwchange) {
1838                 do_setusercontext(pw);
1839                 child_close_fds();
1840                 do_pwchange(s);
1841                 exit(1);
1842         }
1843
1844         /* login(1) is only called if we execute the login shell */
1845         if (options.use_login && command != NULL)
1846                 options.use_login = 0;
1847
1848 #ifdef _UNICOS
1849         cray_setup(pw->pw_uid, pw->pw_name, command);
1850 #endif /* _UNICOS */
1851
1852         /*
1853          * Login(1) does this as well, and it needs uid 0 for the "-h"
1854          * switch, so we let login(1) to this for us.
1855          */
1856         if (!options.use_login) {
1857 #ifdef HAVE_OSF_SIA
1858                 session_setup_sia(pw, s->ttyfd == -1 ? NULL : s->tty);
1859                 if (!check_quietlogin(s, command))
1860                         do_motd();
1861 #else /* HAVE_OSF_SIA */
1862                 /* When PAM is enabled we rely on it to do the nologin check */
1863                 if (!options.use_pam)
1864                         do_nologin(pw);
1865                 do_setusercontext(pw);
1866                 /*
1867                  * PAM session modules in do_setusercontext may have
1868                  * generated messages, so if this in an interactive
1869                  * login then display them too.
1870                  */
1871                 if (!check_quietlogin(s, command))
1872                         display_loginmsg();
1873 #endif /* HAVE_OSF_SIA */
1874         }
1875
1876 #ifdef USE_PAM
1877         if (options.use_pam && !options.use_login && !is_pam_session_open()) {
1878                 debug3("PAM session not opened, exiting");
1879                 display_loginmsg();
1880                 exit(254);
1881         }
1882 #endif
1883
1884         /*
1885          * Get the shell from the password data.  An empty shell field is
1886          * legal, and means /bin/sh.
1887          */
1888         shell = (pw->pw_shell[0] == '\0') ? _PATH_BSHELL : pw->pw_shell;
1889
1890         /*
1891          * Make sure $SHELL points to the shell from the password file,
1892          * even if shell is overridden from login.conf
1893          */
1894         env = do_setup_env(s, shell);
1895
1896 #ifdef HAVE_LOGIN_CAP
1897         shell = login_getcapstr(lc, "shell", (char *)shell, (char *)shell);
1898 #endif
1899
1900         /* we have to stash the hostname before we close our socket. */
1901         if (options.use_login)
1902                 hostname = get_remote_name_or_ip(utmp_len,
1903                     options.use_dns);
1904         /*
1905          * Close the connection descriptors; note that this is the child, and
1906          * the server will still have the socket open, and it is important
1907          * that we do not shutdown it.  Note that the descriptors cannot be
1908          * closed before building the environment, as we call
1909          * get_remote_ipaddr there.
1910          */
1911         child_close_fds();
1912
1913         /*
1914          * Must take new environment into use so that .ssh/rc,
1915          * /etc/ssh/sshrc and xauth are run in the proper environment.
1916          */
1917         environ = env;
1918
1919 #if defined(KRB5) && defined(USE_AFS)
1920         /*
1921          * At this point, we check to see if AFS is active and if we have
1922          * a valid Kerberos 5 TGT. If so, it seems like a good idea to see
1923          * if we can (and need to) extend the ticket into an AFS token. If
1924          * we don't do this, we run into potential problems if the user's
1925          * home directory is in AFS and it's not world-readable.
1926          */
1927
1928         if (options.kerberos_get_afs_token && k_hasafs() &&
1929             (s->authctxt->krb5_ctx != NULL)) {
1930                 char cell[64];
1931
1932                 debug("Getting AFS token");
1933
1934                 k_setpag();
1935
1936                 if (k_afs_cell_of_file(pw->pw_dir, cell, sizeof(cell)) == 0)
1937                         krb5_afslog(s->authctxt->krb5_ctx,
1938                             s->authctxt->krb5_fwd_ccache, cell, NULL);
1939
1940                 krb5_afslog_home(s->authctxt->krb5_ctx,
1941                     s->authctxt->krb5_fwd_ccache, NULL, NULL, pw->pw_dir);
1942         }
1943 #endif
1944
1945 #ifdef AFS_KRB5
1946
1947         /* User has authenticated, and if a ticket was going to be
1948          * passed we would have it.  KRB5CCNAME should already be set.
1949          * Now try to get an AFS token using aklog.
1950          */
1951         if (k_hasafs()) {  /* Do we have AFS? */
1952
1953                 aklog_path = xstrdup(KPROGDIR);
1954
1955                 /*
1956                  * Make sure it exists before we try to run it
1957                  */
1958                 if (stat(aklog_path, &st) == 0) {
1959                         debug("Running %s to get afs token.",aklog_path);
1960                         system(aklog_path);
1961                 } else {
1962                         debug("%s does not exist.",aklog_path);
1963                 }
1964
1965                 xfree(aklog_path);
1966         }
1967 #endif /* AFS_KRB5 */
1968
1969 #ifdef SESSION_HOOKS
1970         if (options.session_hooks_allow &&
1971             options.session_hooks_startup_cmd)
1972         {
1973             execute_session_hook(options.session_hooks_startup_cmd,
1974                                  s->authctxt,
1975                                  /* startup = */ 1,
1976                                  options.session_hooks_shutdown_cmd != NULL);
1977         }
1978 #endif
1979
1980         /* Change current directory to the user's home directory. */
1981         if (chdir(pw->pw_dir) < 0) {
1982                 /* Suppress missing homedir warning for chroot case */
1983 #ifdef HAVE_LOGIN_CAP
1984                 r = login_getcapbool(lc, "requirehome", 0);
1985 #endif
1986                 if (r || options.chroot_directory == NULL)
1987                         fprintf(stderr, "Could not chdir to home "
1988                             "directory %s: %s\n", pw->pw_dir,
1989                             strerror(errno));
1990                 if (r)
1991                         exit(1);
1992         }
1993
1994         closefrom(STDERR_FILENO + 1);
1995
1996         if (!options.use_login)
1997                 do_rc_files(s, shell);
1998
1999         /* restore SIGPIPE for child */
2000         signal(SIGPIPE, SIG_DFL);
2001
2002         if (s->is_subsystem == SUBSYSTEM_INT_SFTP) {
2003                 extern int optind, optreset;
2004                 int i;
2005                 char *p, *args;
2006
2007                 setproctitle("%s@%s", s->pw->pw_name, INTERNAL_SFTP_NAME);
2008                 args = xstrdup(command ? command : "sftp-server");
2009                 for (i = 0, (p = strtok(args, " ")); p; (p = strtok(NULL, " ")))
2010                         if (i < ARGV_MAX - 1)
2011                                 argv[i++] = p;
2012                 argv[i] = NULL;
2013                 optind = optreset = 1;
2014                 __progname = argv[0];
2015                 exit(sftp_server_main(i, argv, s->pw));
2016         }
2017
2018         if (options.use_login) {
2019                 launch_login(pw, hostname);
2020                 /* NEVERREACHED */
2021         }
2022
2023         /* Get the last component of the shell name. */
2024         if ((shell0 = strrchr(shell, '/')) != NULL)
2025                 shell0++;
2026         else
2027                 shell0 = shell;
2028
2029         /*
2030          * If we have no command, execute the shell.  In this case, the shell
2031          * name to be passed in argv[0] is preceded by '-' to indicate that
2032          * this is a login shell.
2033          */
2034         if (!command) {
2035                 char argv0[256];
2036
2037                 /* Start the shell.  Set initial character to '-'. */
2038                 argv0[0] = '-';
2039
2040                 if (strlcpy(argv0 + 1, shell0, sizeof(argv0) - 1)
2041                     >= sizeof(argv0) - 1) {
2042                         errno = EINVAL;
2043                         perror(shell);
2044                         exit(1);
2045                 }
2046
2047                 /* Execute the shell. */
2048                 argv[0] = argv0;
2049                 argv[1] = NULL;
2050                 execve(shell, argv, environ);
2051
2052                 /* Executing the shell failed. */
2053                 perror(shell);
2054                 exit(1);
2055         }
2056         /*
2057          * Execute the command using the user's shell.  This uses the -c
2058          * option to execute the command.
2059          */
2060         argv[0] = (char *) shell0;
2061         argv[1] = "-c";
2062         argv[2] = (char *) command;
2063         argv[3] = NULL;
2064         execve(shell, argv, environ);
2065         perror(shell);
2066         exit(1);
2067 }
2068
2069 void
2070 session_unused(int id)
2071 {
2072         debug3("%s: session id %d unused", __func__, id);
2073         if (id >= options.max_sessions ||
2074             id >= sessions_nalloc) {
2075                 fatal("%s: insane session id %d (max %d nalloc %d)",
2076                     __func__, id, options.max_sessions, sessions_nalloc);
2077         }
2078         bzero(&sessions[id], sizeof(*sessions));
2079         sessions[id].self = id;
2080         sessions[id].used = 0;
2081         sessions[id].chanid = -1;
2082         sessions[id].ptyfd = -1;
2083         sessions[id].ttyfd = -1;
2084         sessions[id].ptymaster = -1;
2085         sessions[id].x11_chanids = NULL;
2086         sessions[id].next_unused = sessions_first_unused;
2087         sessions_first_unused = id;
2088 }
2089
2090 Session *
2091 session_new(void)
2092 {
2093         Session *s, *tmp;
2094
2095         if (sessions_first_unused == -1) {
2096                 if (sessions_nalloc >= options.max_sessions)
2097                         return NULL;
2098                 debug2("%s: allocate (allocated %d max %d)",
2099                     __func__, sessions_nalloc, options.max_sessions);
2100                 tmp = xrealloc(sessions, sessions_nalloc + 1,
2101                     sizeof(*sessions));
2102                 if (tmp == NULL) {
2103                         error("%s: cannot allocate %d sessions",
2104                             __func__, sessions_nalloc + 1);
2105                         return NULL;
2106                 }
2107                 sessions = tmp;
2108                 session_unused(sessions_nalloc++);
2109         }
2110
2111         if (sessions_first_unused >= sessions_nalloc ||
2112             sessions_first_unused < 0) {
2113                 fatal("%s: insane first_unused %d max %d nalloc %d",
2114                     __func__, sessions_first_unused, options.max_sessions,
2115                     sessions_nalloc);
2116         }
2117
2118         s = &sessions[sessions_first_unused];
2119         if (s->used) {
2120                 fatal("%s: session %d already used",
2121                     __func__, sessions_first_unused);
2122         }
2123         sessions_first_unused = s->next_unused;
2124         s->used = 1;
2125         s->next_unused = -1;
2126         debug("session_new: session %d", s->self);
2127
2128         return s;
2129 }
2130
2131 static void
2132 session_dump(void)
2133 {
2134         int i;
2135         for (i = 0; i < sessions_nalloc; i++) {
2136                 Session *s = &sessions[i];
2137
2138                 debug("dump: used %d next_unused %d session %d %p "
2139                     "channel %d pid %ld",
2140                     s->used,
2141                     s->next_unused,
2142                     s->self,
2143                     s,
2144                     s->chanid,
2145                     (long)s->pid);
2146         }
2147 }
2148
2149 int
2150 session_open(Authctxt *authctxt, int chanid)
2151 {
2152         Session *s = session_new();
2153         debug("session_open: channel %d", chanid);
2154         if (s == NULL) {
2155                 error("no more sessions");
2156                 return 0;
2157         }
2158         s->authctxt = authctxt;
2159         s->pw = authctxt->pw;
2160         if (s->pw == NULL || !authctxt->valid)
2161                 fatal("no user for session %d", s->self);
2162         debug("session_open: session %d: link with channel %d", s->self, chanid);
2163         s->chanid = chanid;
2164         return 1;
2165 }
2166
2167 Session *
2168 session_by_tty(char *tty)
2169 {
2170         int i;
2171         for (i = 0; i < sessions_nalloc; i++) {
2172                 Session *s = &sessions[i];
2173                 if (s->used && s->ttyfd != -1 && strcmp(s->tty, tty) == 0) {
2174                         debug("session_by_tty: session %d tty %s", i, tty);
2175                         return s;
2176                 }
2177         }
2178         debug("session_by_tty: unknown tty %.100s", tty);
2179         session_dump();
2180         return NULL;
2181 }
2182
2183 static Session *
2184 session_by_channel(int id)
2185 {
2186         int i;
2187         for (i = 0; i < sessions_nalloc; i++) {
2188                 Session *s = &sessions[i];
2189                 if (s->used && s->chanid == id) {
2190                         debug("session_by_channel: session %d channel %d",
2191                             i, id);
2192                         return s;
2193                 }
2194         }
2195         debug("session_by_channel: unknown channel %d", id);
2196         session_dump();
2197         return NULL;
2198 }
2199
2200 static Session *
2201 session_by_x11_channel(int id)
2202 {
2203         int i, j;
2204
2205         for (i = 0; i < sessions_nalloc; i++) {
2206                 Session *s = &sessions[i];
2207
2208                 if (s->x11_chanids == NULL || !s->used)
2209                         continue;
2210                 for (j = 0; s->x11_chanids[j] != -1; j++) {
2211                         if (s->x11_chanids[j] == id) {
2212                                 debug("session_by_x11_channel: session %d "
2213                                     "channel %d", s->self, id);
2214                                 return s;
2215                         }
2216                 }
2217         }
2218         debug("session_by_x11_channel: unknown channel %d", id);
2219         session_dump();
2220         return NULL;
2221 }
2222
2223 static Session *
2224 session_by_pid(pid_t pid)
2225 {
2226         int i;
2227         debug("session_by_pid: pid %ld", (long)pid);
2228         for (i = 0; i < sessions_nalloc; i++) {
2229                 Session *s = &sessions[i];
2230                 if (s->used && s->pid == pid)
2231                         return s;
2232         }
2233         error("session_by_pid: unknown pid %ld", (long)pid);
2234         session_dump();
2235         return NULL;
2236 }
2237
2238 static int
2239 session_window_change_req(Session *s)
2240 {
2241         s->col = packet_get_int();
2242         s->row = packet_get_int();
2243         s->xpixel = packet_get_int();
2244         s->ypixel = packet_get_int();
2245         packet_check_eom();
2246         pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
2247         return 1;
2248 }
2249
2250 static int
2251 session_pty_req(Session *s)
2252 {
2253         u_int len;
2254         int n_bytes;
2255
2256         if (no_pty_flag) {
2257                 debug("Allocating a pty not permitted for this authentication.");
2258                 return 0;
2259         }
2260         if (s->ttyfd != -1) {
2261                 packet_disconnect("Protocol error: you already have a pty.");
2262                 return 0;
2263         }
2264
2265         s->term = packet_get_string(&len);
2266
2267         if (compat20) {
2268                 s->col = packet_get_int();
2269                 s->row = packet_get_int();
2270         } else {
2271                 s->row = packet_get_int();
2272                 s->col = packet_get_int();
2273         }
2274         s->xpixel = packet_get_int();
2275         s->ypixel = packet_get_int();
2276
2277         if (strcmp(s->term, "") == 0) {
2278                 xfree(s->term);
2279                 s->term = NULL;
2280         }
2281
2282         /* Allocate a pty and open it. */
2283         debug("Allocating pty.");
2284         if (!PRIVSEP(pty_allocate(&s->ptyfd, &s->ttyfd, s->tty,
2285             sizeof(s->tty)))) {
2286                 if (s->term)
2287                         xfree(s->term);
2288                 s->term = NULL;
2289                 s->ptyfd = -1;
2290                 s->ttyfd = -1;
2291                 error("session_pty_req: session %d alloc failed", s->self);
2292                 return 0;
2293         }
2294         debug("session_pty_req: session %d alloc %s", s->self, s->tty);
2295
2296         /* for SSH1 the tty modes length is not given */
2297         if (!compat20)
2298                 n_bytes = packet_remaining();
2299         tty_parse_modes(s->ttyfd, &n_bytes);
2300
2301         if (!use_privsep)
2302                 pty_setowner(s->pw, s->tty);
2303
2304         /* Set window size from the packet. */
2305         pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
2306
2307         packet_check_eom();
2308         session_proctitle(s);
2309         return 1;
2310 }
2311
2312 static int
2313 session_subsystem_req(Session *s)
2314 {
2315         struct stat st;
2316         u_int len;
2317         int success = 0;
2318         char *prog, *cmd, *subsys = packet_get_string(&len);
2319         u_int i;
2320
2321         packet_check_eom();
2322         logit("subsystem request for %.100s", subsys);
2323
2324         for (i = 0; i < options.num_subsystems; i++) {
2325                 if (strcmp(subsys, options.subsystem_name[i]) == 0) {
2326                         prog = options.subsystem_command[i];
2327                         cmd = options.subsystem_args[i];
2328                         if (!strcmp(INTERNAL_SFTP_NAME, prog)) {
2329                                 s->is_subsystem = SUBSYSTEM_INT_SFTP;
2330                         } else if (stat(prog, &st) < 0) {
2331                                 error("subsystem: cannot stat %s: %s", prog,
2332                                     strerror(errno));
2333                                 break;
2334                         } else {
2335                                 s->is_subsystem = SUBSYSTEM_EXT;
2336                         }
2337                         debug("subsystem: exec() %s", cmd);
2338                         success = do_exec(s, cmd) == 0;
2339                         break;
2340                 }
2341         }
2342
2343         if (!success)
2344                 logit("subsystem request for %.100s failed, subsystem not found",
2345                     subsys);
2346
2347         xfree(subsys);
2348         return success;
2349 }
2350
2351 static int
2352 session_x11_req(Session *s)
2353 {
2354         int success;
2355
2356         if (s->auth_proto != NULL || s->auth_data != NULL) {
2357                 error("session_x11_req: session %d: "
2358                     "x11 forwarding already active", s->self);
2359                 return 0;
2360         }
2361         s->single_connection = packet_get_char();
2362         s->auth_proto = packet_get_string(NULL);
2363         s->auth_data = packet_get_string(NULL);
2364         s->screen = packet_get_int();
2365         packet_check_eom();
2366
2367         success = session_setup_x11fwd(s);
2368         if (!success) {
2369                 xfree(s->auth_proto);
2370                 xfree(s->auth_data);
2371                 s->auth_proto = NULL;
2372                 s->auth_data = NULL;
2373         }
2374         return success;
2375 }
2376
2377 static int
2378 session_shell_req(Session *s)
2379 {
2380         packet_check_eom();
2381         return do_exec(s, NULL) == 0;
2382 }
2383
2384 static int
2385 session_exec_req(Session *s)
2386 {
2387         u_int len, success;
2388
2389         char *command = packet_get_string(&len);
2390         packet_check_eom();
2391         success = do_exec(s, command) == 0;
2392         xfree(command);
2393         return success;
2394 }
2395
2396 static int
2397 session_break_req(Session *s)
2398 {
2399
2400         packet_get_int();       /* ignored */
2401         packet_check_eom();
2402
2403         if (s->ttyfd == -1 || tcsendbreak(s->ttyfd, 0) < 0)
2404                 return 0;
2405         return 1;
2406 }
2407
2408 static int
2409 session_env_req(Session *s)
2410 {
2411         char *name, *val;
2412         u_int name_len, val_len, i;
2413
2414         name = packet_get_string(&name_len);
2415         val = packet_get_string(&val_len);
2416         packet_check_eom();
2417
2418         /* Don't set too many environment variables */
2419         if (s->num_env > 128) {
2420                 debug2("Ignoring env request %s: too many env vars", name);
2421                 goto fail;
2422         }
2423
2424         for (i = 0; i < options.num_accept_env; i++) {
2425                 if (match_pattern(name, options.accept_env[i])) {
2426                         debug2("Setting env %d: %s=%s", s->num_env, name, val);
2427                         s->env = xrealloc(s->env, s->num_env + 1,
2428                             sizeof(*s->env));
2429                         s->env[s->num_env].name = name;
2430                         s->env[s->num_env].val = val;
2431                         s->num_env++;
2432                         return (1);
2433                 }
2434         }
2435         debug2("Ignoring env request %s: disallowed name", name);
2436
2437  fail:
2438         xfree(name);
2439         xfree(val);
2440         return (0);
2441 }
2442
2443 static int
2444 session_auth_agent_req(Session *s)
2445 {
2446         static int called = 0;
2447         packet_check_eom();
2448         if (no_agent_forwarding_flag || !options.allow_agent_forwarding) {
2449                 debug("session_auth_agent_req: no_agent_forwarding_flag");
2450                 return 0;
2451         }
2452         if (called) {
2453                 return 0;
2454         } else {
2455                 called = 1;
2456                 return auth_input_request_forwarding(s->pw);
2457         }
2458 }
2459
2460 int
2461 session_input_channel_req(Channel *c, const char *rtype)
2462 {
2463         int success = 0;
2464         Session *s;
2465
2466         if ((s = session_by_channel(c->self)) == NULL) {
2467                 logit("session_input_channel_req: no session %d req %.100s",
2468                     c->self, rtype);
2469                 return 0;
2470         }
2471         debug("session_input_channel_req: session %d req %s", s->self, rtype);
2472
2473         /*
2474          * a session is in LARVAL state until a shell, a command
2475          * or a subsystem is executed
2476          */
2477         if (c->type == SSH_CHANNEL_LARVAL) {
2478                 if (strcmp(rtype, "shell") == 0) {
2479                         success = session_shell_req(s);
2480                 } else if (strcmp(rtype, "exec") == 0) {
2481                         success = session_exec_req(s);
2482                 } else if (strcmp(rtype, "pty-req") == 0) {
2483                         success = session_pty_req(s);
2484                 } else if (strcmp(rtype, "x11-req") == 0) {
2485                         success = session_x11_req(s);
2486                 } else if (strcmp(rtype, "auth-agent-req@openssh.com") == 0) {
2487                         success = session_auth_agent_req(s);
2488                 } else if (strcmp(rtype, "subsystem") == 0) {
2489                         success = session_subsystem_req(s);
2490                 } else if (strcmp(rtype, "env") == 0) {
2491                         success = session_env_req(s);
2492                 }
2493         }
2494         if (strcmp(rtype, "window-change") == 0) {
2495                 success = session_window_change_req(s);
2496         } else if (strcmp(rtype, "break") == 0) {
2497                 success = session_break_req(s);
2498         }
2499
2500         return success;
2501 }
2502
2503 void
2504 session_set_fds(Session *s, int fdin, int fdout, int fderr, int is_tty)
2505 {
2506         if (!compat20)
2507                 fatal("session_set_fds: called for proto != 2.0");
2508         /*
2509          * now that have a child and a pipe to the child,
2510          * we can activate our channel and register the fd's
2511          */
2512         if (s->chanid == -1)
2513                 fatal("no channel for session %d", s->self);
2514         if (options.hpn_disabled)
2515         channel_set_fds(s->chanid,
2516             fdout, fdin, fderr,
2517             fderr == -1 ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
2518             1, is_tty, CHAN_SES_WINDOW_DEFAULT);
2519         else 
2520                 channel_set_fds(s->chanid,
2521                     fdout, fdin, fderr,
2522                     fderr == -1 ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
2523                     1, is_tty, options.hpn_buffer_size);
2524 }
2525
2526 /*
2527  * Function to perform pty cleanup. Also called if we get aborted abnormally
2528  * (e.g., due to a dropped connection).
2529  */
2530 void
2531 session_pty_cleanup2(Session *s)
2532 {
2533         if (s == NULL) {
2534                 error("session_pty_cleanup: no session");
2535                 return;
2536         }
2537         if (s->ttyfd == -1)
2538                 return;
2539
2540         debug("session_pty_cleanup: session %d release %s", s->self, s->tty);
2541
2542         /* Record that the user has logged out. */
2543         if (s->pid != 0)
2544                 record_logout(s->pid, s->tty, s->pw->pw_name);
2545
2546         /* Release the pseudo-tty. */
2547         if (getuid() == 0)
2548                 pty_release(s->tty);
2549
2550         /*
2551          * Close the server side of the socket pairs.  We must do this after
2552          * the pty cleanup, so that another process doesn't get this pty
2553          * while we're still cleaning up.
2554          */
2555         if (s->ptymaster != -1 && close(s->ptymaster) < 0)
2556                 error("close(s->ptymaster/%d): %s",
2557                     s->ptymaster, strerror(errno));
2558
2559         /* unlink pty from session */
2560         s->ttyfd = -1;
2561 }
2562
2563 void
2564 session_pty_cleanup(Session *s)
2565 {
2566         PRIVSEP(session_pty_cleanup2(s));
2567 }
2568
2569 static char *
2570 sig2name(int sig)
2571 {
2572 #define SSH_SIG(x) if (sig == SIG ## x) return #x
2573         SSH_SIG(ABRT);
2574         SSH_SIG(ALRM);
2575         SSH_SIG(FPE);
2576         SSH_SIG(HUP);
2577         SSH_SIG(ILL);
2578         SSH_SIG(INT);
2579         SSH_SIG(KILL);
2580         SSH_SIG(PIPE);
2581         SSH_SIG(QUIT);
2582         SSH_SIG(SEGV);
2583         SSH_SIG(TERM);
2584         SSH_SIG(USR1);
2585         SSH_SIG(USR2);
2586 #undef  SSH_SIG
2587         return "SIG@openssh.com";
2588 }
2589
2590 static void
2591 session_close_x11(int id)
2592 {
2593         Channel *c;
2594
2595         if ((c = channel_by_id(id)) == NULL) {
2596                 debug("session_close_x11: x11 channel %d missing", id);
2597         } else {
2598                 /* Detach X11 listener */
2599                 debug("session_close_x11: detach x11 channel %d", id);
2600                 channel_cancel_cleanup(id);
2601                 if (c->ostate != CHAN_OUTPUT_CLOSED)
2602                         chan_mark_dead(c);
2603         }
2604 }
2605
2606 static void
2607 session_close_single_x11(int id, void *arg)
2608 {
2609         Session *s;
2610         u_int i;
2611
2612         debug3("session_close_single_x11: channel %d", id);
2613         channel_cancel_cleanup(id);
2614         if ((s = session_by_x11_channel(id)) == NULL)
2615                 fatal("session_close_single_x11: no x11 channel %d", id);
2616         for (i = 0; s->x11_chanids[i] != -1; i++) {
2617                 debug("session_close_single_x11: session %d: "
2618                     "closing channel %d", s->self, s->x11_chanids[i]);
2619                 /*
2620                  * The channel "id" is already closing, but make sure we
2621                  * close all of its siblings.
2622                  */
2623                 if (s->x11_chanids[i] != id)
2624                         session_close_x11(s->x11_chanids[i]);
2625         }
2626         xfree(s->x11_chanids);
2627         s->x11_chanids = NULL;
2628         if (s->display) {
2629                 xfree(s->display);
2630                 s->display = NULL;
2631         }
2632         if (s->auth_proto) {
2633                 xfree(s->auth_proto);
2634                 s->auth_proto = NULL;
2635         }
2636         if (s->auth_data) {
2637                 xfree(s->auth_data);
2638                 s->auth_data = NULL;
2639         }
2640         if (s->auth_display) {
2641                 xfree(s->auth_display);
2642                 s->auth_display = NULL;
2643         }
2644 }
2645
2646 static void
2647 session_exit_message(Session *s, int status)
2648 {
2649         Channel *c;
2650
2651         if ((c = channel_lookup(s->chanid)) == NULL)
2652                 fatal("session_exit_message: session %d: no channel %d",
2653                     s->self, s->chanid);
2654         debug("session_exit_message: session %d channel %d pid %ld",
2655             s->self, s->chanid, (long)s->pid);
2656
2657         if (WIFEXITED(status)) {
2658                 channel_request_start(s->chanid, "exit-status", 0);
2659                 packet_put_int(WEXITSTATUS(status));
2660                 packet_send();
2661         } else if (WIFSIGNALED(status)) {
2662                 channel_request_start(s->chanid, "exit-signal", 0);
2663                 packet_put_cstring(sig2name(WTERMSIG(status)));
2664 #ifdef WCOREDUMP
2665                 packet_put_char(WCOREDUMP(status)? 1 : 0);
2666 #else /* WCOREDUMP */
2667                 packet_put_char(0);
2668 #endif /* WCOREDUMP */
2669                 packet_put_cstring("");
2670                 packet_put_cstring("");
2671                 packet_send();
2672         } else {
2673                 /* Some weird exit cause.  Just exit. */
2674                 packet_disconnect("wait returned status %04x.", status);
2675         }
2676
2677         /* disconnect channel */
2678         debug("session_exit_message: release channel %d", s->chanid);
2679
2680         /*
2681          * Adjust cleanup callback attachment to send close messages when
2682          * the channel gets EOF. The session will be then be closed
2683          * by session_close_by_channel when the childs close their fds.
2684          */
2685         channel_register_cleanup(c->self, session_close_by_channel, 1);
2686
2687         /*
2688          * emulate a write failure with 'chan_write_failed', nobody will be
2689          * interested in data we write.
2690          * Note that we must not call 'chan_read_failed', since there could
2691          * be some more data waiting in the pipe.
2692          */
2693         if (c->ostate != CHAN_OUTPUT_CLOSED)
2694                 chan_write_failed(c);
2695 }
2696
2697 void
2698 session_close(Session *s)
2699 {
2700         u_int i;
2701
2702         debug("session_close: session %d pid %ld", s->self, (long)s->pid);
2703         if (s->ttyfd != -1)
2704                 session_pty_cleanup(s);
2705         if (s->term)
2706                 xfree(s->term);
2707         if (s->display)
2708                 xfree(s->display);
2709         if (s->x11_chanids)
2710                 xfree(s->x11_chanids);
2711         if (s->auth_display)
2712                 xfree(s->auth_display);
2713         if (s->auth_data)
2714                 xfree(s->auth_data);
2715         if (s->auth_proto)
2716                 xfree(s->auth_proto);
2717         if (s->env != NULL) {
2718                 for (i = 0; i < s->num_env; i++) {
2719                         xfree(s->env[i].name);
2720                         xfree(s->env[i].val);
2721                 }
2722                 xfree(s->env);
2723         }
2724         session_proctitle(s);
2725         session_unused(s->self);
2726 }
2727
2728 void
2729 session_close_by_pid(pid_t pid, int status)
2730 {
2731         Session *s = session_by_pid(pid);
2732         if (s == NULL) {
2733                 debug("session_close_by_pid: no session for pid %ld",
2734                     (long)pid);
2735                 return;
2736         }
2737         if (s->chanid != -1)
2738                 session_exit_message(s, status);
2739         if (s->ttyfd != -1)
2740                 session_pty_cleanup(s);
2741         s->pid = 0;
2742 }
2743
2744 /*
2745  * this is called when a channel dies before
2746  * the session 'child' itself dies
2747  */
2748 void
2749 session_close_by_channel(int id, void *arg)
2750 {
2751         Session *s = session_by_channel(id);
2752         u_int i;
2753
2754         if (s == NULL) {
2755                 debug("session_close_by_channel: no session for id %d", id);
2756                 return;
2757         }
2758         debug("session_close_by_channel: channel %d child %ld",
2759             id, (long)s->pid);
2760         if (s->pid != 0) {
2761                 debug("session_close_by_channel: channel %d: has child", id);
2762                 /*
2763                  * delay detach of session, but release pty, since
2764                  * the fd's to the child are already closed
2765                  */
2766                 if (s->ttyfd != -1)
2767                         session_pty_cleanup(s);
2768                 return;
2769         }
2770         /* detach by removing callback */
2771         channel_cancel_cleanup(s->chanid);
2772
2773         /* Close any X11 listeners associated with this session */
2774         if (s->x11_chanids != NULL) {
2775                 for (i = 0; s->x11_chanids[i] != -1; i++) {
2776                         session_close_x11(s->x11_chanids[i]);
2777                         s->x11_chanids[i] = -1;
2778                 }
2779         }
2780
2781         s->chanid = -1;
2782         session_close(s);
2783 }
2784
2785 void
2786 session_destroy_all(void (*closefunc)(Session *))
2787 {
2788         int i;
2789         for (i = 0; i < sessions_nalloc; i++) {
2790                 Session *s = &sessions[i];
2791                 if (s->used) {
2792                         if (closefunc != NULL)
2793                                 closefunc(s);
2794                         else
2795                                 session_close(s);
2796                 }
2797         }
2798 }
2799
2800 static char *
2801 session_tty_list(void)
2802 {
2803         static char buf[1024];
2804         int i;
2805         char *cp;
2806
2807         buf[0] = '\0';
2808         for (i = 0; i < sessions_nalloc; i++) {
2809                 Session *s = &sessions[i];
2810                 if (s->used && s->ttyfd != -1) {
2811
2812                         if (strncmp(s->tty, "/dev/", 5) != 0) {
2813                                 cp = strrchr(s->tty, '/');
2814                                 cp = (cp == NULL) ? s->tty : cp + 1;
2815                         } else
2816                                 cp = s->tty + 5;
2817
2818                         if (buf[0] != '\0')
2819                                 strlcat(buf, ",", sizeof buf);
2820                         strlcat(buf, cp, sizeof buf);
2821                 }
2822         }
2823         if (buf[0] == '\0')
2824                 strlcpy(buf, "notty", sizeof buf);
2825         return buf;
2826 }
2827
2828 void
2829 session_proctitle(Session *s)
2830 {
2831         if (s->pw == NULL)
2832                 error("no user for session %d", s->self);
2833         else
2834                 setproctitle("%s@%s", s->pw->pw_name, session_tty_list());
2835 }
2836
2837 int
2838 session_setup_x11fwd(Session *s)
2839 {
2840         struct stat st;
2841         char display[512], auth_display[512];
2842         char hostname[MAXHOSTNAMELEN];
2843         u_int i;
2844
2845         if (no_x11_forwarding_flag) {
2846                 packet_send_debug("X11 forwarding disabled in user configuration file.");
2847                 return 0;
2848         }
2849         if (!options.x11_forwarding) {
2850                 debug("X11 forwarding disabled in server configuration file.");
2851                 return 0;
2852         }
2853         if (!options.xauth_location ||
2854             (stat(options.xauth_location, &st) == -1)) {
2855                 packet_send_debug("No xauth program; cannot forward with spoofing.");
2856                 return 0;
2857         }
2858         if (options.use_login) {
2859                 packet_send_debug("X11 forwarding disabled; "
2860                     "not compatible with UseLogin=yes.");
2861                 return 0;
2862         }
2863         if (s->display != NULL) {
2864                 debug("X11 display already set.");
2865                 return 0;
2866         }
2867         if (x11_create_display_inet(options.x11_display_offset,
2868             options.x11_use_localhost, s->single_connection,
2869             &s->display_number, &s->x11_chanids) == -1) {
2870                 debug("x11_create_display_inet failed.");
2871                 return 0;
2872         }
2873         for (i = 0; s->x11_chanids[i] != -1; i++) {
2874                 channel_register_cleanup(s->x11_chanids[i],
2875                     session_close_single_x11, 0);
2876         }
2877
2878         /* Set up a suitable value for the DISPLAY variable. */
2879         if (gethostname(hostname, sizeof(hostname)) < 0)
2880                 fatal("gethostname: %.100s", strerror(errno));
2881         /*
2882          * auth_display must be used as the displayname when the
2883          * authorization entry is added with xauth(1).  This will be
2884          * different than the DISPLAY string for localhost displays.
2885          */
2886         if (options.x11_use_localhost) {
2887                 snprintf(display, sizeof display, "localhost:%u.%u",
2888                     s->display_number, s->screen);
2889                 snprintf(auth_display, sizeof auth_display, "unix:%u.%u",
2890                     s->display_number, s->screen);
2891                 s->display = xstrdup(display);
2892                 s->auth_display = xstrdup(auth_display);
2893         } else {
2894 #ifdef IPADDR_IN_DISPLAY
2895                 struct hostent *he;
2896                 struct in_addr my_addr;
2897
2898                 he = gethostbyname(hostname);
2899                 if (he == NULL) {
2900                         error("Can't get IP address for X11 DISPLAY.");
2901                         packet_send_debug("Can't get IP address for X11 DISPLAY.");
2902                         return 0;
2903                 }
2904                 memcpy(&my_addr, he->h_addr_list[0], sizeof(struct in_addr));
2905                 snprintf(display, sizeof display, "%.50s:%u.%u", inet_ntoa(my_addr),
2906                     s->display_number, s->screen);
2907 #else
2908                 snprintf(display, sizeof display, "%.400s:%u.%u", hostname,
2909                     s->display_number, s->screen);
2910 #endif
2911                 s->display = xstrdup(display);
2912                 s->auth_display = xstrdup(display);
2913         }
2914
2915         return 1;
2916 }
2917
2918 static void
2919 do_authenticated2(Authctxt *authctxt)
2920 {
2921         server_loop2(authctxt);
2922 }
2923
2924 void
2925 do_cleanup(Authctxt *authctxt)
2926 {
2927         static int called = 0;
2928
2929         debug("do_cleanup");
2930
2931         /* no cleanup if we're in the child for login shell */
2932         if (is_child)
2933                 return;
2934
2935         /* avoid double cleanup */
2936         if (called)
2937                 return;
2938         called = 1;
2939
2940         if (authctxt == NULL)
2941                 return;
2942
2943 #ifdef USE_PAM
2944         if (options.use_pam) {
2945                 sshpam_cleanup();
2946                 sshpam_thread_cleanup();
2947         }
2948 #endif
2949
2950         if (!authctxt->authenticated)
2951                 return;
2952
2953 #ifdef KRB5
2954         if (options.kerberos_ticket_cleanup &&
2955             authctxt->krb5_ctx)
2956                 krb5_cleanup_proc(authctxt);
2957 #endif
2958
2959 #ifdef GSSAPI
2960         if (compat20 && options.gss_cleanup_creds)
2961                 ssh_gssapi_cleanup_creds();
2962 #endif
2963
2964         /* remove agent socket */
2965         auth_sock_cleanup_proc(authctxt->pw);
2966
2967         /*
2968          * Cleanup ptys/utmp only if privsep is disabled,
2969          * or if running in monitor.
2970          */
2971         if (!use_privsep || mm_is_monitor())
2972                 session_destroy_all(session_pty_cleanup2);
2973 }
This page took 0.267182 seconds and 5 git commands to generate.