-###
-### Makefile for building and installing LCLint 2.5
-###
-### Updated for LCLint 2.5: 23 May 2000
-### Updated for LCLint 2.4: 12 April 1998
-### Updated for LCLint 2.2: 25 August 1996
-### Updated for LCLint 2.1a: 17 April 1996
-### Updated for LCLint 2.0: 24 February 1996
-### Updated for LCLint 1.4: 29 January 1995
-### Original for LCLint 1.0: 20 February 1994
-###
-
-###
-### This makefile assumes the gnu version of make is available.
-###
-### Run: make to build LCLint.
-### make install to install.
-###
-###
-### These constants will be compiled into the lclint binary.
-###
-### They may be overridden by environment variables, but these
-### constants set the default values when no environment variables
-### are set.
-###
-
-### Command to run C preprocessor:
-
-DEFAULT_CPPCMD = @CPP@
-
-### Directory containing system include files:
-
-SYSTEM_LIBDIR = "/usr/include"
-
-###
-### Select installation directories:
-###
-### The LIBDIR and IMPORTSDIR are compiled into the binary to
-### select the default LARCH_PATH and LCLIMPORTDIR, which can
-### also be overridden by environment variables.
-###
-
-### directory for lclint libraries
-LIBDIR = @installdir@/lib
-
-### directory for lclint standard imports
-IMPORTSDIR = @installdir@/imports
-
-### directory for lclint binary
-INSTALLDIR = @installdir@/bin
-
-### this should be the complete path for the directory where this
-### Makefile is, with no trailing / or spaces.
-
-BASEDIR = @cwdir@
-
-###
-### Then, run:
-###
-### make
-###
-### I recommend doing this in an emacs shell (or buffered terminal) so
-### you can scroll through the output.
-###
-### This should (hopefully) work on most systems without further changes.
-###
-### If you do not have gcc, set CC = cc (or some other compiler)
-### later in this file.
-###
-### It should:
-### o build lclint
-### o put lclint in BASEDIR/bin/lclint
-###
-### If you have installed the test suite, then do:
-###
-### make test
-###
-### to verify lclint.
-###
-
-###
-### shell --- should work with /bin/sh or similar shells too.
-###
-
-SHELL = /bin/csh
-
-###
-### If you wish to install lclint in some other directory, set these
-### variables, and do
-###
-### make install
-###
-
-### installation command
-INSTALL = @INSTALL@
-INSTALLFLAGS =
-
-### this works with nfs, change to whatever is needed to make
-### a file executable on your system
-
-MAKEEXE = chmod 755
-
-###
-### end of installation variables
-###
-
-###
-### compiler --- gcc is recommended, but lclint has been compiled
-### without changes using cc on several platforms.
-###
-
-CC = @CC@ @DEFS@
-
-###
-### optimizing compiler --- add optimization flags here
-###
-
-CCOPT = $(CC) @OPT@
-
-###
-### link flags --- this links the lex or flex library
-###
-
-LINKFLAGS = @LINKLEX@
-
-###
-### do you have bison and/or flex?
-### (Note: yacc will probably not work; lex might work but is not recommended.)
-###
-
-BISON = @BISON@
-FLEX = @FLEX@
-
-###
-### is the test suite available? (must be full path here)
-###
-
-TESTDIR = $(BASEDIR)/test
-
-###
-### if this Makefile is used with one of the
-### standard installation packages, no changes should be
-### necessary below this line.
-###
-
-.PHONY: install dobinaries dolibraries doimports test
-
-###
-### set this to a different directory
-### to install binaries elsewhere
-###
-
-RELEASEDIR = $(BASEDIR)/bin
-
-all: bin/lclint
-lclint: bin/lclint
-
-bin/lclint:
- @echo 'Building lclint from source'
-ifeq ($(SHELL), /bin/csh)
- cd src ; setenv CC '$(CC)' ; setenv CCOPT '$(CCOPT)'; \
- setenv BISON '$(BISON)' ; setenv FLEX '$(FLEX)' ; \
- setenv DEFAULT_CPPCMD '"$(DEFAULT_CPPCMD)"' ; \
- setenv SYSTEM_LIBDIR '$(SYSTEM_LIBDIR)' ; \
- setenv LINKFLAGS '$(LINKFLAGS)' ; \
- setenv DEFAULT_LARCHPATH '".:$(LIBDIR)"' ; \
- setenv DEFAULT_LCLIMPORTDIR '"$(IMPORTSDIR)"' ; \
- $(MAKE) -e
-else
- cd src ; CC='$(CC)'; export CC; CCOPT='$(CCOPT)'; \
- BISON='$(BISON)' ; export BISON; FLEX='$(FLEX)'; export FLEX; \
- DEFAULT_CPPCMD='$(DEFAULT_CPPCMD)' ; export DEFAULT_CPPCMD ;\
- SYSTEM_LIBDIR='$(SYSTEM_LIBDIR)' ; export SYSTEM_LIBDIR ;\
- DEFAULT_LARCHPATH='".:$(LIBDIR)/"' ; export DEFAULT_LARCHPATH ;\
- LINKFLAGS='$(LINKFLAGS)'; export LINKFLAGS; \
- DEFAULT_LCLIMPORTDIR='"$(IMPORTSDIR)"' ; export DEFAULT_LCLIMPORTDIR ;\
- $(MAKE) -e
-endif
- @echo '// '
- @echo '// Run: '$(MAKE)' test to check'
- @echo '// '
- -mkdir bin
- mv src/lclint bin/lclint
-
-test:
-ifeq ($(SHELL), /bin/csh)
- cd $(TESTDIR) ; setenv LCLINT $(RELEASEDIR)/lclint ; $(MAKE) -e
-else
- cd $(TESTDIR) ; LCLINT=$(RELEASEDIR)/lclint ; export LCLINT ; $(MAKE) -e
-endif
-
-clean:
- cd src; $(MAKE) clean
- rm bin/lclint
-
-###
-### locations of standard LCLint files
-###
-### this should NOT have to be edited if you use the standard
-### installation package
-
-CP = cp
-
-LCLINTBINDIR = $(BASEDIR)/bin
-LCLINTBIN = lclint
-
-LCLINTLIB = $(BASEDIR)/lib
-LCLINTIMPORTS = $(BASEDIR)/imports
-
-###
-### uses recursive make calls directly, so installation
-### will continue even if there are errors!
-###
-
-install:
- @echo '// '
- @echo '// Doing lclint installation'
- @echo '// '
- @echo ' '
- -@$(MAKE) dobinaries
- @echo ' '
- -@$(MAKE) dolibraries
- @echo ' '
- -@$(MAKE) doimports
- @echo ' '
- @echo '// Installation complete.'
-
-dobinaries:
- @echo '// Installing binaries in '$(INSTALLDIR)
- cd $(LCLINTBINDIR); $(INSTALL) $(INSTALLFLAGS) lclint $(INSTALLDIR)
- @echo '// Installed: lclint in '$(INSTALLDIR)
-
-dolibraries:
- @echo '// Installing libraries in '$(LIBDIR)
- @echo " (This will complain if the directory already exists, don't worry about it.)"
- -mkdir $(LIBDIR)
- $(CP) $(LCLINTLIB)/* $(LIBDIR)
- @echo '// Installed libraries.'
-
-doimports:
- @echo '// Installing imports in '$(IMPORTSDIR)
- @echo " (This will complain if the directory already exists, don't worry about it.)"
- -mkdir $(IMPORTSDIR)
- $(CP) $(LCLINTIMPORTS)/* $(IMPORTSDIR)
- @echo '// Installed imports.'
-
-
-
-
-
-
-
-
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AWK = @AWK@
+BISON = @BISON@
+CAT = @CAT@
+CC = @CC@
+CP = @CP@
+CPP = @CPP@
+DEPDIR = @DEPDIR@
+DIFF = @DIFF@
+GREP = @GREP@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LCLOBJ = @LCLOBJ@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LN_S = @LN_S@
+MV = @MV@
+PACKAGE = @PACKAGE@
+RM = @RM@
+SED = @SED@
+STRIP = @STRIP@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+AUTOMAKE_OPTIONS = 1.5 foreign
+
+binaryfixscript = ./fixBinaryDist.sh
+SUBDIRS = src lib imports test doc
+
+binaryDir = bin
+binaryDirFiles = $(binaryDir)/Makefile.am $(binaryDir)/Makefile.in
+
+binaryBuiltFiles = Makefile.binary.am configure.binary.ac
+
+#include these in case we're trying to build on a systems
+#without the bleeding edge versions of automake and autoconf
+binaryDerivedFiles = Makefile.binary.in configure.binary
+
+EXTRA_DIST = $(binaryfixscript) $(binaryBuiltFiles) $(binaryDerivedFiles) $(binaryDirFiles) install.html
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+ uninstall-info-recursive all-recursive install-data-recursive \
+ install-exec-recursive installdirs-recursive install-recursive \
+ uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README Makefile.am Makefile.in acinclude.m4 aclocal.m4 \
+ config.hin config/config.guess config/config.sub config/depcomp \
+ config/install-sh config/missing config/mkinstalldirs configure \
+ configure.ac
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): configure.ac acinclude.m4
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+$(srcdir)/config.hin: $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ touch $(srcdir)/config.hin
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkinstalldirs) $(distdir)/$(binaryDir) $(distdir)/config
+ @list='$(DISTFILES)'; for file in $$list; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="${top_distdir}" distdir="$(distdir)" \
+ dist-hook
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ $(am__remove_distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+ && cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ find $$dc_install_base -type f -print ; \
+ exit 1; } >&2 ) \
+ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+ && rm -f $(distdir).tar.gz \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+distcleancheck: distclean
+ if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+ clean-generic clean-recursive dist dist-all dist-gzip distcheck \
+ distclean distclean-generic distclean-hdr distclean-recursive \
+ distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
+ info info-am info-recursive install install-am install-data \
+ install-data-am install-data-recursive install-exec \
+ install-exec-am install-exec-recursive install-info \
+ install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-recursive tags tags-recursive uninstall \
+ uninstall-am uninstall-info-am uninstall-info-recursive \
+ uninstall-recursive
+
+
+.PHONY: test
+
+#try to remake these but don't stop if it fails.
+configure.binary:configure.binary.ac
+ -autoconf -oconfigure.binary configure.binary.ac
+
+Makefile.binary.in:Makefile.binary.am
+ -automake Makefile.binary
+ $(SED) -e s/Makefile\.binary/Makefile/ Makefile.binary.in > tMakefile.binary.in
+# $(RM) Makefile.binary.in
+ $(CP) tMakefile.binary.in Makefile.binary.in
+#drl add this hack 3/1/2003
+#make the generated makefile depend on Makefile not Makefile.binary
+$(binaryDir)/Makefile.in: $(binaryDir)/Makefile.am
+ -automake $(binaryDir)/Makefile
+preDist: $(binaryDir)/Makefile.in $(binaryDerivedFiles)
+bindist: $(binaryDerivedFiles)
+ $(MAKE)
+ $(RM) -f $(binaryDir)/splint
+ $(CP) src/splint $(binaryDir)/splint
+ $(MV) install.html installSource.html
+ $(CP) doc/` uname | tr [A-Z] [a-z]`.html install.html
+ $(MAKE) -e dist dh_script=$(binaryfixscript) SUBDIRS="$(binaryDir) lib imports doc"
+ $(MV) $(distdir).tar.gz $(distdir).`uname`.tgz
+ $(MV) installSource.html install.html
+dist-hook:
+ cd $(distdir); pwd; $(dh_script)
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: