From ddd8c95bff053db0ac13c5af6131f5bd94a4806b Mon Sep 17 00:00:00 2001
From: tim <tim>
Date: Sun, 20 Jun 2004 02:31:06 +0000
Subject: [PATCH]  - (tim) [configure.ac buildpkg.sh.in contrib/solaris/README]
 move opensshd    init script to top level directory.

---
 ChangeLog                                     |   3 +
 buildpkg.sh.in                                |   8 +-
 configure.ac                                  |   4 +-
 contrib/solaris/README                        |  10 +-
 contrib/solaris/buildpkg.sh                   | 386 ------------------
 .../solaris/opensshd.in => opensshd.init.in   |  16 +-
 6 files changed, 24 insertions(+), 403 deletions(-)
 delete mode 100755 contrib/solaris/buildpkg.sh
 rename contrib/solaris/opensshd.in => opensshd.init.in (86%)

diff --git a/ChangeLog b/ChangeLog
index 32ab7841..d313db5c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,6 +1,9 @@
 20040619
  - (dtucker) [auth-pam.c] Don't use PAM namespace for
     pam_password_change_required either.
+ - (tim) [configure.ac buildpkg.sh.in contrib/solaris/README] move opensshd
+   init script to top level directory.  Add opensshd.init.in.
+   Remove contrib/solaris/buildpkg.sh, contrib/solaris/opensshd.in
 
 20040618
  - (djm) OpenBSD CVS Sync
diff --git a/buildpkg.sh.in b/buildpkg.sh.in
index 0afa10b1..3b5343b9 100644
--- a/buildpkg.sh.in
+++ b/buildpkg.sh.in
@@ -43,7 +43,7 @@ PKG_POSTREMOVE_LOCAL=../pkg-postremove.local
 PKG_REQUEST_LOCAL=../pkg-request.local
 # end of sourced files
 #
-OPENSSHD_IN=@top_srcdir@/contrib/solaris/opensshd.in
+OPENSSHD=opensshd.init
 
 PATH_GROUPADD_PROG=@PATH_GROUPADD_PROG@
 PATH_USERADD_PROG=@PATH_USERADD_PROG@
@@ -168,11 +168,7 @@ fi
 ## Setup our run level stuff while we are at it.
 mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
 
-## setup our initscript correctly
-sed -e "s#%%configDir%%#${sysconfdir}#g" 	\
-    -e "s#%%openSSHDir%%#$prefix#g"		\
-    -e "s#%%pidDir%%#${piddir}#g"		\
-	${OPENSSHD_IN}	> $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
+cp ${OPENSSHD} $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
 chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
 
 [ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
diff --git a/configure.ac b/configure.ac
index 636528a1..a4ca8b51 100644
--- a/configure.ac
+++ b/configure.ac
@@ -28,6 +28,8 @@ AC_PROG_CPP
 AC_PROG_RANLIB
 AC_PROG_INSTALL
 AC_PATH_PROG(AR, ar)
+AC_PATH_PROG(CAT, cat)
+AC_PATH_PROG(KILL, kill)
 AC_PATH_PROGS(PERL, perl5 perl)
 AC_PATH_PROG(SED, sed)
 AC_SUBST(PERL)
@@ -2915,7 +2917,7 @@ if test "$ac_cv_lib_pam_pam_set_item" = yes ; then
 fi
 
 AC_EXEEXT
-AC_CONFIG_FILES([Makefile buildpkg.sh openbsd-compat/Makefile scard/Makefile ssh_prng_cmds])
+AC_CONFIG_FILES([Makefile buildpkg.sh opensshd.init openbsd-compat/Makefile scard/Makefile ssh_prng_cmds])
 AC_OUTPUT
 
 # Print summary of options
diff --git a/contrib/solaris/README b/contrib/solaris/README
index eb4c590f..fefdd4b5 100755
--- a/contrib/solaris/README
+++ b/contrib/solaris/README
@@ -12,8 +12,14 @@ Directions:
 
 1. make -F Makefile.in distprep  (Only if you are getting from the CVS tree)
 2. ./configure --with-pam [..any other options you want..]
-3. look at the top of contrib/solaris/buildpkg.sh for the configurable options.
-4. ./contrib/solaris/buildpkg.sh
+3. look at the top of buildpkg.sh for the configurable options and put
+   any changes you want in openssh-config.local. Additional customizations
+   can be done to the build process by creating one or more of the following
+   scripts that will be sourced by buildpkg.sh.
+	pkg_post_make_install_fixes.sh pkg-post-prototype-edit.sh
+	pkg-preinstall.local pkg-postinstall.local pkg-preremove.local
+	pkg-postremove.local pkg-request.local
+4. Run "make package"
 
 If all goes well you should have a solaris package ready to be installed.
 
diff --git a/contrib/solaris/buildpkg.sh b/contrib/solaris/buildpkg.sh
deleted file mode 100755
index 29d09630..00000000
--- a/contrib/solaris/buildpkg.sh
+++ /dev/null
@@ -1,386 +0,0 @@
-#!/bin/sh
-#
-# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
-#
-# The following code has been provide under Public Domain License.  I really
-# don't care what you use it for.  Just as long as you don't complain to me
-# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
-#
-umask 022
-#
-# Options for building the package
-# You can create a config.local with your customized options
-#
-# uncommenting TEST_DIR and using
-# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
-# and
-# PKGNAME=tOpenSSH should allow testing a package without interfering
-# with a real OpenSSH package on a system. This is not needed on systems
-# that support the -R option to pkgadd.
-#TEST_DIR=/var/tmp	# leave commented out for production build
-PKGNAME=OpenSSH
-SYSVINIT_NAME=opensshd
-MAKE=${MAKE:="make"}
-SSHDUID=67	# Default privsep uid
-SSHDGID=67	# Default privsep gid
-# uncomment these next three as needed
-#PERMIT_ROOT_LOGIN=no
-#X11_FORWARDING=yes
-#USR_LOCAL_IS_SYMLINK=yes
-# list of system directories we do NOT want to change owner/group/perms
-# when installing our package
-SYSTEM_DIR="/etc	\
-/etc/init.d		\
-/etc/rcS.d		\
-/etc/rc0.d		\
-/etc/rc1.d		\
-/etc/rc2.d		\
-/etc/opt		\
-/opt			\
-/opt/bin		\
-/usr			\
-/usr/bin		\
-/usr/lib		\
-/usr/sbin		\
-/usr/share		\
-/usr/share/man		\
-/usr/share/man/man1	\
-/usr/share/man/man8	\
-/usr/local		\
-/usr/local/bin		\
-/usr/local/etc		\
-/usr/local/libexec	\
-/usr/local/man		\
-/usr/local/man/man1	\
-/usr/local/man/man8	\
-/usr/local/sbin		\
-/usr/local/share	\
-/var			\
-/var/opt		\
-/var/run		\
-/var/tmp		\
-/tmp"
-
-# We may need to build as root so we make sure PATH is set up
-# only set the path if it's not set already
-[ -d /usr/local/bin ]  &&  {
-	echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
-	[ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
-}
-[ -d /usr/ccs/bin ]  &&  {
-	echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
-	[ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
-}
-export PATH
-#
-
-[ -f Makefile ]  ||  {
-	echo "Please run this script from your build directory"
-	exit 1
-}
-
-# we will look for config.local to override the above options
-[ -s ./config.local ]  &&  . ./config.local
-
-## Start by faking root install
-echo "Faking root install..."
-START=`pwd`
-OPENSSHD_IN=`dirname $0`/opensshd.in
-FAKE_ROOT=$START/package
-[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
-mkdir $FAKE_ROOT
-${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
-if [ $? -gt 0 ]
-then
-	echo "Fake root install failed, stopping."
-	exit 1
-fi
-
-## Fill in some details, like prefix and sysconfdir
-for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir
-do
-	eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
-done
-
-
-## Collect value of privsep user
-for confvar in SSH_PRIVSEP_USER
-do
-	eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
-done
-
-## Set privsep defaults if not defined
-if [ -z "$SSH_PRIVSEP_USER" ]
-then
-	SSH_PRIVSEP_USER=sshd
-fi
-
-## Extract common info requires for the 'info' part of the package.
-VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
-
-UNAME_S=`uname -s`
-case ${UNAME_S} in
-	SunOS)	UNAME_S=Solaris
-		ARCH=`uname -p`
-		RCS_D=yes
-		DEF_MSG="(default: n)"
-		;;
-	*)	ARCH=`uname -m`
-		DEF_MSG="\n" ;;
-esac
-
-## Setup our run level stuff while we are at it.
-mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
-
-## setup our initscript correctly
-sed -e "s#%%configDir%%#${sysconfdir}#g" 	\
-    -e "s#%%openSSHDir%%#$prefix#g"		\
-    -e "s#%%pidDir%%#${piddir}#g"		\
-	${OPENSSHD_IN}	> $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
-chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
-
-[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
-	perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
-		$FAKE_ROOT/${sysconfdir}/sshd_config
-[ "${X11_FORWARDING}" = yes ]  &&  \
-	perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
-		$FAKE_ROOT/${sysconfdir}/sshd_config
-# fix PrintMotd
-perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
-	$FAKE_ROOT/${sysconfdir}/sshd_config
-
-# We don't want to overwrite config files on multiple installs
-mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default
-mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default
-[ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ]  &&  \
-mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default
-
-cd $FAKE_ROOT
-
-## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
-## whining.
-for i in *; do
-  PROTO_ARGS="$PROTO_ARGS $i=/$i";
-done
-
-## Build info file
-echo "Building pkginfo file..."
-cat > pkginfo << _EOF
-PKG=$PKGNAME
-NAME="OpenSSH Portable for ${UNAME_S}"
-DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
-VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html"
-ARCH=$ARCH
-VERSION=$VERSION
-CATEGORY="Security,application"
-BASEDIR=/
-CLASSES="none"
-_EOF
-
-## Build preinstall file
-echo "Building preinstall file..."
-cat > preinstall << _EOF
-#! /sbin/sh
-#
-[ "\${PRE_INS_STOP}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
-exit 0
-_EOF
-
-## Build postinstall file
-echo "Building postinstall file..."
-cat > postinstall << _EOF
-#! /sbin/sh
-#
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
-	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
-		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
-	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
-		\${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ]  &&  {
-	[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ]  ||  \\
-	cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
-		\${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
-}
-
-# make rc?.d dirs only if we are doing a test install
-[ -n "${TEST_DIR}" ]  &&  {
-	[ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
-	mkdir -p ${TEST_DIR}/etc/rc0.d
-	mkdir -p ${TEST_DIR}/etc/rc1.d
-	mkdir -p ${TEST_DIR}/etc/rc2.d
-}
-
-if [ "\${USE_SYM_LINKS}" = yes ]
-then
-	[ "$RCS_D" = yes ]  &&  \
-installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-else
-	[ "$RCS_D" = yes ]  &&  \
-installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-	installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-fi
-
-# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
-[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 755 root sys
-
-installf -f ${PKGNAME}
-
-# Use chroot to handle PKG_INSTALL_ROOT
-if [ ! -z "\${PKG_INSTALL_ROOT}" ]
-then
-	chroot="chroot \${PKG_INSTALL_ROOT}"
-fi
-# If this is a test build, we will skip the groupadd/useradd/passwd commands
-if [ ! -z "${TEST_DIR}" ]
-then
-	chroot=echo
-fi
-
-if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
-then
-	echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
-	echo "or group."
-else
-	echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."
-
-	# create group if required
-	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
-	then
-		echo "PrivSep group $SSH_PRIVSEP_USER already exists."
-	else
-		# Use gid of 67 if possible
-		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
-		then
-			:
-		else
-			sshdgid="-g $SSHDGID"
-		fi
-		echo "Creating PrivSep group $SSH_PRIVSEP_USER."
-		\$chroot /usr/sbin/groupadd \$sshdgid $SSH_PRIVSEP_USER
-	fi
-
-	# Create user if required
-	if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
-	then
-		echo "PrivSep user $SSH_PRIVSEP_USER already exists."
-	else
-		# Use uid of 67 if possible
-		if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDGID'\$' >/dev/null
-		then
-			:
-		else
-			sshduid="-u $SSHDUID"
-		fi
-		echo "Creating PrivSep user $SSH_PRIVSEP_USER."
-		\$chroot /usr/sbin/useradd -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
-		\$chroot /usr/bin/passwd -l $SSH_PRIVSEP_USER
-	fi
-fi
-
-[ "\${POST_INS_START}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
-exit 0
-_EOF
-
-## Build preremove file
-echo "Building preremove file..."
-cat > preremove << _EOF
-#! /sbin/sh
-#
-${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
-exit 0
-_EOF
-
-## Build request file
-echo "Building request file..."
-cat > request << _EOF
-trap 'exit 3' 15
-USE_SYM_LINKS=no
-PRE_INS_STOP=no
-POST_INS_START=no
-# Use symbolic links?
-ans=\`ckyorn -d n \
--p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
-case \$ans in
-	[y,Y]*)	USE_SYM_LINKS=yes ;;
-esac
-
-# determine if should restart the daemon
-if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
-then
-	ans=\`ckyorn -d n \
--p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
-	case \$ans in
-		[y,Y]*)	PRE_INS_STOP=yes
-			POST_INS_START=yes
-			;;
-	esac
-
-else
-
-# determine if we should start sshd
-	ans=\`ckyorn -d n \
--p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
-	case \$ans in
-		[y,Y]*)	POST_INS_START=yes ;;
-	esac
-fi
-
-# make parameters available to installation service,
-# and so to any other packaging scripts
-cat >\$1 <<!
-USE_SYM_LINKS='\$USE_SYM_LINKS'
-PRE_INS_STOP='\$PRE_INS_STOP'
-POST_INS_START='\$POST_INS_START'
-!
-exit 0
-
-_EOF
-
-## Build space file
-echo "Building space file..."
-cat > space << _EOF
-# extra space required by start/stop links added by installf in postinstall
-$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME} 0 1
-$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME} 0 1
-$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME} 0 1
-_EOF
-[ "$RCS_D" = yes ]  &&  \
-echo "$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME} 0 1" >> space
-
-## Next Build our prototype
-echo "Building prototype file..."
-cat >mk-proto.awk << _EOF
-	    BEGIN { print "i pkginfo"; print "i preinstall"; \\
-		    print "i postinstall"; print "i preremove"; \\
-		    print "i request"; print "i space"; \\
-		    split("$SYSTEM_DIR",sys_files); }
-	    {
-	     for (dir in sys_files) { if ( \$3 != sys_files[dir] )
-		     { \$5="root"; \$6="sys"; }
-		else
-		     { \$4="?"; \$5="?"; \$6="?"; break;}
-	    } }
-	    { print; }
-_EOF
-find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
-	pkgproto $PROTO_ARGS | nawk -f mk-proto.awk > prototype
-
-# /usr/local is a symlink on some systems
-[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
-	grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
-	mv prototype.new prototype
-}
-
-## Step back a directory and now build the package.
-echo "Building package.."
-cd ..
-pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
-echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$UNAME_S-$ARCH-$VERSION.pkg
-rm -rf $FAKE_ROOT
-
diff --git a/contrib/solaris/opensshd.in b/opensshd.init.in
similarity index 86%
rename from contrib/solaris/opensshd.in
rename to opensshd.init.in
index 50e18dee..ffa7cdac 100755
--- a/contrib/solaris/opensshd.in
+++ b/opensshd.init.in
@@ -5,19 +5,19 @@
 
 umask 022
 
-CAT=/usr/bin/cat
-KILL=/usr/bin/kill
+CAT=@CAT@
+KILL=@KILL@
 
-prefix=%%openSSHDir%%
-etcdir=%%configDir%%
-piddir=%%pidDir%%
+prefix=@prefix@
+sysconfdir=@sysconfdir@
+piddir=@piddir@
 
 SSHD=$prefix/sbin/sshd
 PIDFILE=$piddir/sshd.pid
 SSH_KEYGEN=$prefix/bin/ssh-keygen
-HOST_KEY_RSA1=$etcdir/ssh_host_key
-HOST_KEY_DSA=$etcdir/ssh_host_dsa_key
-HOST_KEY_RSA=$etcdir/ssh_host_rsa_key
+HOST_KEY_RSA1=$sysconfdir/ssh_host_key
+HOST_KEY_DSA=$sysconfdir/ssh_host_dsa_key
+HOST_KEY_RSA=$sysconfdir/ssh_host_rsa_key
 
 
 checkkeys() {
-- 
2.45.2