X-Git-Url: http://andersk.mit.edu/gitweb/openssh.git/blobdiff_plain/36535ee6649f96e9819384a5f747eb1ab9fe4f50..0598d99d917545f1cf2e2a3a09e29cdbe70302ff:/sshd_config.5 diff --git a/sshd_config.5 b/sshd_config.5 index f619855e..3d920cc8 100644 --- a/sshd_config.5 +++ b/sshd_config.5 @@ -34,7 +34,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $OpenBSD: sshd_config.5,v 1.7 2002/08/09 17:21:42 stevesk Exp $ +.\" $OpenBSD: sshd_config.5,v 1.22 2003/08/13 08:46:31 markus Exp $ .Dd September 25, 1999 .Dt SSHD_CONFIG 5 .Os @@ -61,10 +61,6 @@ The possible keywords and their meanings are as follows (note that keywords are case-insensitive and arguments are case-sensitive): .Bl -tag -width Ds -.It Cm AFSTokenPassing -Specifies whether an AFS token may be forwarded to the server. -Default is -.Dq no . .It Cm AllowGroups This keyword can be followed by a list of group name patterns, separated by spaces. @@ -72,7 +68,7 @@ If specified, login is allowed only for users whose primary group or supplementary group list matches one of the patterns. .Ql \&* and -.Ql ? +.Ql \&? can be used as wildcards in the patterns. Only group names are valid; a numerical group ID is not recognized. @@ -89,11 +85,11 @@ own forwarders. .It Cm AllowUsers This keyword can be followed by a list of user name patterns, separated by spaces. -If specified, login is allowed only for users names that +If specified, login is allowed only for user names that match one of the patterns. .Ql \&* and -.Ql ? +.Ql \&? can be used as wildcards in the patterns. Only user names are valid; a numerical user ID is not recognized. @@ -107,7 +103,8 @@ Specifies the file that contains the public keys that can be used for user authentication. .Cm AuthorizedKeysFile may contain tokens of the form %T which are substituted during connection -set-up. The following tokens are defined: %% is replaced by a literal '%', +set-up. +The following tokens are defined: %% is replaced by a literal '%', %h is replaced by the home directory of the user being authenticated and %u is replaced by the username of that user. After expansion, @@ -138,7 +135,7 @@ The default is .Pp .Bd -literal ``aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour, - aes192-cbc,aes256-cbc'' + aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr'' .Ed .It Cm ClientAliveInterval Sets a timeout interval in seconds after which if no data has been received @@ -153,20 +150,24 @@ This option applies to protocol version 2 only. Sets the number of client alive messages (see above) which may be sent without .Nm sshd -receiving any messages back from the client. If this threshold is -reached while client alive messages are being sent, +receiving any messages back from the client. +If this threshold is reached while client alive messages are being sent, .Nm sshd -will disconnect the client, terminating the session. It is important -to note that the use of client alive messages is very different from +will disconnect the client, terminating the session. +It is important to note that the use of client alive messages is very +different from .Cm KeepAlive -(below). The client alive messages are sent through the -encrypted channel and therefore will not be spoofable. The TCP keepalive -option enabled by +(below). +The client alive messages are sent through the encrypted channel +and therefore will not be spoofable. +The TCP keepalive option enabled by .Cm KeepAlive -is spoofable. The client alive mechanism is valuable when the client or +is spoofable. +The client alive mechanism is valuable when the client or server depend on knowing when a connection has become inactive. .Pp -The default value is 3. If +The default value is 3. +If .Cm ClientAliveInterval (above) is set to 15, and .Cm ClientAliveCountMax @@ -187,7 +188,7 @@ Login is disallowed for users whose primary group or supplementary group list matches one of the patterns. .Ql \&* and -.Ql ? +.Ql \&? can be used as wildcards in the patterns. Only group names are valid; a numerical group ID is not recognized. @@ -199,7 +200,7 @@ by spaces. Login is disallowed for user names that match one of the patterns. .Ql \&* and -.Ql ? +.Ql \&? can be used as wildcards in the patterns. Only user names are valid; a numerical user ID is not recognized. By default, login is allowed for all users. @@ -211,8 +212,8 @@ Specifies whether remote hosts are allowed to connect to ports forwarded for the client. By default, .Nm sshd -binds remote port forwardings to the loopback address. This -prevents other remote hosts from connecting to forwarded ports. +binds remote port forwardings to the loopback address. +This prevents other remote hosts from connecting to forwarded ports. .Cm GatewayPorts can be used to specify that .Nm sshd @@ -259,7 +260,6 @@ Specifies that and .Pa .shosts files will not be used in -.Cm RhostsAuthentication , .Cm RhostsRSAAuthentication or .Cm HostbasedAuthentication . @@ -322,8 +322,7 @@ Default is .It Cm KerberosTgtPassing Specifies whether a Kerberos TGT may be forwarded to the server. Default is -.Dq no , -as this only works when the Kerberos KDC is actually an AFS kaserver. +.Dq no . .It Cm KerberosTicketCleanup Specifies whether to automatically destroy the user's ticket cache file on logout. @@ -369,26 +368,28 @@ is not specified, .Nm sshd will listen on the address and all prior .Cm Port -options specified. The default is to listen on all local -addresses. Multiple +options specified. +The default is to listen on all local addresses. +Multiple .Cm ListenAddress -options are permitted. Additionally, any +options are permitted. +Additionally, any .Cm Port options must precede this option for non port qualified addresses. .It Cm LoginGraceTime The server disconnects after this time if the user has not successfully logged in. If the value is 0, there is no time limit. -The default is 600 (seconds). +The default is 120 seconds. .It Cm LogLevel Gives the verbosity level that is used when logging messages from .Nm sshd . The possible values are: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2 and DEBUG3. -The default is INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 -and DEBUG3 each specify higher levels of debugging output. -Logging with a DEBUG level violates the privacy of users -and is not recommended. +The default is INFO. +DEBUG and DEBUG1 are equivalent. +DEBUG2 and DEBUG3 each specify higher levels of debugging output. +Logging with a DEBUG level violates the privacy of users and is not recommended. .It Cm MACs Specifies the available MAC (message authentication code) algorithms. The MAC algorithm is used in protocol version 2 @@ -421,12 +422,6 @@ The probability increases linearly and all connection attempts are refused if the number of unauthenticated connections reaches .Dq full (60). -.It Cm PAMAuthenticationViaKbdInt -Specifies whether PAM challenge response authentication is allowed. This -allows the use of most PAM challenge response authentication modules, but -it will allow password authentication regardless of whether -.Cm PasswordAuthentication -is enabled. .It Cm PasswordAuthentication Specifies whether password authentication is allowed. The default is @@ -459,8 +454,8 @@ but only if the .Ar command option has been specified (which may be useful for taking remote backups even if root login is -normally not allowed). All other authentication methods are disabled -for root. +normally not allowed). +All other authentication methods are disabled for root. .Pp If this option is set to .Dq no @@ -468,18 +463,17 @@ root is not allowed to login. .It Cm PermitUserEnvironment Specifies whether .Pa ~/.ssh/environment -is read by -.Nm sshd -and whether +and .Cm environment= options in .Pa ~/.ssh/authorized_keys -files are permitted. +are processed by +.Nm sshd . The default is .Dq no . -This option is useful for locked-down installations where -.Ev LD_PRELOAD -and suchlike can cause security problems. +Enabling environment processing may enable users to bypass access +restrictions in some configurations using mechanisms such as +.Ev LD_PRELOAD . .It Cm PidFile Specifies the file that contains the process ID of the .Nm sshd @@ -534,10 +528,6 @@ Specifies whether public key authentication is allowed. The default is .Dq yes . Note that this option applies to protocol version 2 only. -.It Cm RhostsAuthentication -Specifies whether authentication using rhosts or /etc/hosts.equiv -files is sufficient. -Normally, this method should not be permitted because it is insecure. .Cm RhostsRSAAuthentication should be used instead, because it performs RSA-based host authentication in addition @@ -585,6 +575,14 @@ Gives the facility code that is used when logging messages from The possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The default is AUTH. +.It Cm UseDNS +Specifies whether +.Nm sshd +should lookup the remote host name and check that +the resolved host name for the remote IP address maps back to the +very same IP address. +The default is +.Dq yes . .It Cm UseLogin Specifies whether .Xr login 1 @@ -600,27 +598,28 @@ will be disabled because .Xr login 1 does not know how to handle .Xr xauth 1 -cookies. If +cookies. +If .Cm UsePrivilegeSeparation is specified, it will be disabled after authentication. +.It Cm UsePAM +Enables PAM authentication (via challenge-response) and session set up. +If you enable this, you should probably disable +.Cm PasswordAuthentication . +If you enable +.CM UsePAM +then you will not be able to run sshd as a non-root user. .It Cm UsePrivilegeSeparation Specifies whether .Nm sshd separates privileges by creating an unprivileged child process -to deal with incoming network traffic. After successful authentication, -another process will be created that has the privilege of the authenticated -user. The goal of privilege separation is to prevent privilege +to deal with incoming network traffic. +After successful authentication, another process will be created that has +the privilege of the authenticated user. +The goal of privilege separation is to prevent privilege escalation by containing any corruption within the unprivileged processes. The default is .Dq yes . -.It Cm VerifyReverseMapping -Specifies whether -.Nm sshd -should try to verify the remote host name and check that -the resolved host name for the remote IP address maps back to the -very same IP address. -The default is -.Dq no . .It Cm X11DisplayOffset Specifies the first display number available for .Nm sshd Ns 's @@ -631,10 +630,35 @@ from interfering with real X11 servers. The default is 10. .It Cm X11Forwarding Specifies whether X11 forwarding is permitted. +The argument must be +.Dq yes +or +.Dq no . The default is .Dq no . -Note that disabling X11 forwarding does not improve security in any -way, as users can always install their own forwarders. +.Pp +When X11 forwarding is enabled, there may be additional exposure to +the server and to client displays if the +.Nm sshd +proxy display is configured to listen on the wildcard address (see +.Cm X11UseLocalhost +below), however this is not the default. +Additionally, the authentication spoofing and authentication data +verification and substitution occur on the client side. +The security risk of using X11 forwarding is that the client's X11 +display server may be exposed to attack when the ssh client requests +forwarding (see the warnings for +.Cm ForwardX11 +in +.Xr ssh_config 5 ) . +A system administrator may have a stance in which they want to +protect clients that may expose themselves to attack by unwittingly +requesting X11 forwarding, which can warrant a +.Dq no +setting. +.Pp +Note that disabling X11 forwarding does not prevent users from +forwarding X11 traffic, as users can always install their own forwarders. X11 forwarding is automatically disabled if .Cm UseLogin is enabled. @@ -642,14 +666,15 @@ is enabled. Specifies whether .Nm sshd should bind the X11 forwarding server to the loopback address or to -the wildcard address. By default, +the wildcard address. +By default, .Nm sshd binds the forwarding server to the loopback address and sets the hostname part of the .Ev DISPLAY environment variable to .Dq localhost . -This prevents remote hosts from connecting to the fake display. +This prevents remote hosts from connecting to the proxy display. However, some older X11 clients may not function with this configuration. .Cm X11UseLocalhost @@ -664,14 +689,13 @@ or The default is .Dq yes . .It Cm XAuthLocation -Specifies the location of the +Specifies the full pathname of the .Xr xauth 1 program. The default is .Pa /usr/X11R6/bin/xauth . .El .Ss Time Formats -.Pp .Nm sshd command-line arguments and configuration file options that specify time may be expressed using a sequence of the form: @@ -720,6 +744,8 @@ Contains configuration data for This file should be writable by root only, but it is recommended (though not necessary) that it be world-readable. .El +.Sh SEE ALSO +.Xr sshd 8 .Sh AUTHORS OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. @@ -731,5 +757,3 @@ Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0. Niels Provos and Markus Friedl contributed support for privilege separation. -.Sh SEE ALSO -.Xr sshd 8