]> andersk Git - openssh.git/blobdiff - ttymodes.h
- djm@cvs.openbsd.org 2010/01/30 02:54:53
[openssh.git] / ttymodes.h
index 3db5f33feb118bedf9951dbd3749683617dd2f93..4d848fe3a9efa246bcfc8830e5a40765f3cda1c8 100644 (file)
-/*
-
-ttymodes.h
-
-Author: Tatu Ylonen <ylo@cs.hut.fi>
-       SGTTY stuff contributed by Janne Snabb <snabb@niksula.hut.fi>
+/* $OpenBSD: ttymodes.h,v 1.14 2006/03/25 22:22:43 djm Exp $ */
 
-Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
-                   All rights reserved
-
-Created: Tue Mar 21 15:42:09 1995 ylo
-
-*/
+/*
+ * Author: Tatu Ylonen <ylo@cs.hut.fi>
+ * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
+ *                    All rights reserved
+ *
+ * As far as I am concerned, the code I have written for this software
+ * can be used freely for any purpose.  Any derived versions of this
+ * software must be clearly marked as such, and if the derived work is
+ * incompatible with the protocol description in the RFC file, it must be
+ * called by a name other than "ssh" or "Secure Shell".
+ */
 
-/* RCSID("$Id$"); */
+/*
+ * SSH2 tty modes support by Kevin Steves.
+ * Copyright (c) 2001 Kevin Steves.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
 
-/* The tty mode description is a stream of bytes.  The stream consists of
-   opcode-arguments pairs.  It is terminated by opcode TTY_OP_END (0).
-   Opcodes 1-127 have one-byte arguments.  Opcodes 128-159 have integer
-   arguments.  Opcodes 160-255 are not yet defined, and cause parsing to
-   stop (they should only be used after any other data).
+/*
+ * SSH1:
+ * The tty mode description is a stream of bytes.  The stream consists of
+ * opcode-arguments pairs.  It is terminated by opcode TTY_OP_END (0).
+ * Opcodes 1-127 have one-byte arguments.  Opcodes 128-159 have integer
+ * arguments.  Opcodes 160-255 are not yet defined, and cause parsing to
+ * stop (they should only be used after any other data).
+ *
+ * SSH2:
+ * Differences between SSH1 and SSH2 terminal mode encoding include:
+ * 1. Encoded terminal modes are represented as a string, and a stream
+ *    of bytes within that string.
+ * 2. Opcode arguments are uint32 (1-159); 160-255 remain undefined.
+ * 3. The values for TTY_OP_ISPEED and TTY_OP_OSPEED are different;
+ *    128 and 129 vs. 192 and 193 respectively.
+ *
+ * The client puts in the stream any modes it knows about, and the
+ * server ignores any modes it does not know about.  This allows some degree
+ * of machine-independence, at least between systems that use a posix-like
+ * tty interface.  The protocol can support other systems as well, but might
+ * require reimplementing as mode names would likely be different.
+ */
 
-   The client puts in the stream any modes it knows about, and the
-   server ignores any modes it does not know about.  This allows some degree
-   of machine-independence, at least between systems that use a posix-like
-   tty interface.  The protocol can support other systems as well, but might
-   require reimplementing as mode names would likely be different. */
-     
-/* Some constants and prototypes are defined in packet.h; this file
-   is only intended for including from ttymodes.h. */
+/*
+ * Some constants and prototypes are defined in packet.h; this file
+ * is only intended for including from ttymodes.c.
+ */
 
-/* termios macro */            /* sgtty macro */
+/* termios macro */
 /* name, op */
-TTYCHAR(VINTR, 1)              SGTTYCHAR(tiotc.t_intrc, 1)
-TTYCHAR(VQUIT, 2)              SGTTYCHAR(tiotc.t_quitc, 2)
-TTYCHAR(VERASE, 3)             SGTTYCHAR(tio.sg_erase, 3)
+TTYCHAR(VINTR, 1)
+TTYCHAR(VQUIT, 2)
+TTYCHAR(VERASE, 3)
 #if defined(VKILL)
-TTYCHAR(VKILL, 4)              SGTTYCHAR(tio.sg_kill, 4)
+TTYCHAR(VKILL, 4)
 #endif /* VKILL */
-TTYCHAR(VEOF, 5)               SGTTYCHAR(tiotc.t_eofc, 5)
+TTYCHAR(VEOF, 5)
 #if defined(VEOL)
-TTYCHAR(VEOL, 6)               SGTTYCHAR(tiotc.t_brkc, 6)
+TTYCHAR(VEOL, 6)
 #endif /* VEOL */
-#ifdef VEOL2                   /* n/a */
+#ifdef VEOL2
 TTYCHAR(VEOL2, 7)
 #endif /* VEOL2 */
-TTYCHAR(VSTART, 8)             SGTTYCHAR(tiotc.t_startc, 8)
-TTYCHAR(VSTOP, 9)              SGTTYCHAR(tiotc.t_stopc, 9)
+TTYCHAR(VSTART, 8)
+TTYCHAR(VSTOP, 9)
 #if defined(VSUSP)
-TTYCHAR(VSUSP, 10)             SGTTYCHAR(tioltc.t_suspc, 10)
+TTYCHAR(VSUSP, 10)
 #endif /* VSUSP */
 #if defined(VDSUSP)
-TTYCHAR(VDSUSP, 11)            SGTTYCHAR(tioltc.t_dsuspc, 11)
+TTYCHAR(VDSUSP, 11)
 #endif /* VDSUSP */
 #if defined(VREPRINT)
-TTYCHAR(VREPRINT, 12)          SGTTYCHAR(tioltc.t_rprntc, 12)
+TTYCHAR(VREPRINT, 12)
 #endif /* VREPRINT */
 #if defined(VWERASE)
-TTYCHAR(VWERASE, 13)           SGTTYCHAR(tioltc.t_werasc, 13)
+TTYCHAR(VWERASE, 13)
 #endif /* VWERASE */
 #if defined(VLNEXT)
-TTYCHAR(VLNEXT, 14)            SGTTYCHAR(tioltc.t_lnextc, 14)
+TTYCHAR(VLNEXT, 14)
 #endif /* VLNEXT */
 #if defined(VFLUSH)
-TTYCHAR(VFLUSH, 15)            SGTTYCHAR(tioltc.t_flushc, 15)
+TTYCHAR(VFLUSH, 15)
 #endif /* VFLUSH */
 #ifdef VSWTCH
-TTYCHAR(VSWTCH, 16)            /* n/a */
+TTYCHAR(VSWTCH, 16)
 #endif /* VSWTCH */
 #if defined(VSTATUS)
-TTYCHAR(VSTATUS, 17)           SGTTYCHAR(tiots.tc_statusc, 17)
+TTYCHAR(VSTATUS, 17)
 #endif /* VSTATUS */
 #ifdef VDISCARD
-TTYCHAR(VDISCARD, 18)          /* n/a */
+TTYCHAR(VDISCARD, 18)
 #endif /* VDISCARD */
 
 /* name, field, op */
-TTYMODE(IGNPAR,        c_iflag, 30)    /* n/a */
-TTYMODE(PARMRK,        c_iflag, 31)    /* n/a */
-TTYMODE(INPCK,         c_iflag, 32)    SGTTYMODEN(ANYP, tio.sg_flags, 32)
-TTYMODE(ISTRIP,        c_iflag, 33)    SGTTYMODEN(LPASS8, tiolm, 33)
-TTYMODE(INLCR,         c_iflag, 34)    /* n/a */
-TTYMODE(IGNCR,         c_iflag, 35)    /* n/a */
-TTYMODE(ICRNL,         c_iflag, 36)    SGTTYMODE(CRMOD, tio.sg_flags, 36)
+TTYMODE(IGNPAR,        c_iflag, 30)
+TTYMODE(PARMRK,        c_iflag, 31)
+TTYMODE(INPCK, c_iflag, 32)
+TTYMODE(ISTRIP,        c_iflag, 33)
+TTYMODE(INLCR, c_iflag, 34)
+TTYMODE(IGNCR, c_iflag, 35)
+TTYMODE(ICRNL, c_iflag, 36)
 #if defined(IUCLC)
-TTYMODE(IUCLC,         c_iflag, 37)    SGTTYMODE(LCASE, tio.sg_flags, 37)
+TTYMODE(IUCLC, c_iflag, 37)
 #endif
-TTYMODE(IXON,          c_iflag, 38)    /* n/a */
-TTYMODE(IXANY,         c_iflag, 39)    SGTTYMODEN(LDECCTQ, tiolm, 39)
-TTYMODE(IXOFF,         c_iflag, 40)    SGTTYMODE(TANDEM, tio.sg_flags, 40)
+TTYMODE(IXON,  c_iflag, 38)
+TTYMODE(IXANY, c_iflag, 39)
+TTYMODE(IXOFF, c_iflag, 40)
 #ifdef IMAXBEL
-TTYMODE(IMAXBEL,c_iflag, 41)   /* n/a */
+TTYMODE(IMAXBEL,c_iflag, 41)
 #endif /* IMAXBEL */
 
-TTYMODE(ISIG,  c_lflag, 50)    /* n/a */
-TTYMODE(ICANON,        c_lflag, 51)    SGTTYMODEN(CBREAK, tio.sg_flags, 51)
+TTYMODE(ISIG,  c_lflag, 50)
+TTYMODE(ICANON,        c_lflag, 51)
 #ifdef XCASE
-TTYMODE(XCASE, c_lflag, 52)    /* n/a */
+TTYMODE(XCASE, c_lflag, 52)
 #endif
-TTYMODE(ECHO,  c_lflag, 53)    SGTTYMODE(ECHO, tio.sg_flags, 53)
-TTYMODE(ECHOE, c_lflag, 54)    SGTTYMODE(LCRTERA, tiolm, 54)
-TTYMODE(ECHOK, c_lflag, 55)    SGTTYMODE(LCRTKIL, tiolm, 55)
-TTYMODE(ECHONL,        c_lflag, 56)    /* n/a */
-TTYMODE(NOFLSH,        c_lflag, 57)    SGTTYMODE(LNOFLSH, tiolm, 57)
-TTYMODE(TOSTOP,        c_lflag, 58)    SGTTYMODE(LTOSTOP, tiolm, 58)
+TTYMODE(ECHO,  c_lflag, 53)
+TTYMODE(ECHOE, c_lflag, 54)
+TTYMODE(ECHOK, c_lflag, 55)
+TTYMODE(ECHONL,        c_lflag, 56)
+TTYMODE(NOFLSH,        c_lflag, 57)
+TTYMODE(TOSTOP,        c_lflag, 58)
 #ifdef IEXTEN
-TTYMODE(IEXTEN, c_lflag, 59)   /* n/a */
+TTYMODE(IEXTEN, c_lflag, 59)
 #endif /* IEXTEN */
 #if defined(ECHOCTL)
-TTYMODE(ECHOCTL,c_lflag, 60)   SGTTYMODE(LCTLECH, tiolm, 60)
+TTYMODE(ECHOCTL,c_lflag, 60)
 #endif /* ECHOCTL */
 #ifdef ECHOKE
-TTYMODE(ECHOKE,        c_lflag, 61)    /* n/a */
+TTYMODE(ECHOKE,        c_lflag, 61)
 #endif /* ECHOKE */
 #if defined(PENDIN)
-TTYMODE(PENDIN,        c_lflag, 62)    SGTTYMODE(LPENDIN, tiolm, 62)
+TTYMODE(PENDIN,        c_lflag, 62)
 #endif /* PENDIN */
 
-TTYMODE(OPOST, c_oflag, 70)    /* n/a */
+TTYMODE(OPOST, c_oflag, 70)
 #if defined(OLCUC)
-TTYMODE(OLCUC, c_oflag, 71)    SGTTYMODE(LCASE, tio.sg_flags, 71)
+TTYMODE(OLCUC, c_oflag, 71)
+#endif
+#ifdef ONLCR
+TTYMODE(ONLCR, c_oflag, 72)
 #endif
-TTYMODE(ONLCR, c_oflag, 72)    SGTTYMODE(CRMOD, tio.sg_flags, 72)
 #ifdef OCRNL
-TTYMODE(OCRNL, c_oflag, 73)    /* n/a */
+TTYMODE(OCRNL, c_oflag, 73)
 #endif
 #ifdef ONOCR
-TTYMODE(ONOCR, c_oflag, 74)    /* n/a */
+TTYMODE(ONOCR, c_oflag, 74)
 #endif
 #ifdef ONLRET
-TTYMODE(ONLRET,        c_oflag, 75)    /* n/a */
+TTYMODE(ONLRET,        c_oflag, 75)
 #endif
 
-TTYMODE(CS7,   c_cflag, 90)    /* n/a */
-TTYMODE(CS8,   c_cflag, 91)    SGTTYMODE(LPASS8, tiolm, 91)
-TTYMODE(PARENB,        c_cflag, 92)    /* n/a */
-TTYMODE(PARODD,        c_cflag, 93)    SGTTYMODE(ODDP, tio.sg_flags, 93)
-
+TTYMODE(CS7,   c_cflag, 90)
+TTYMODE(CS8,   c_cflag, 91)
+TTYMODE(PARENB,        c_cflag, 92)
+TTYMODE(PARODD,        c_cflag, 93)
This page took 0.164433 seconds and 4 git commands to generate.