You will need working installations of Zlib and OpenSSL.
Zlib:
-http://www.cdrom.com/pub/infozip/zlib/
+http://www.gzip.org/zlib/
-OpenSSL 0.9.5a or greater:
+OpenSSL 0.9.6 or greater:
http://www.openssl.org/
-RPMs of OpenSSL are available in the support/ directory of the OpenSSH
-mirror site. OpenSSH requires OpenSSL version 0.9.5 or later.
+(OpenSSL 0.9.5a is partially supported, but some ciphers (SSH protocol 1
+Blowfish) do not work correctly.)
OpenSSH can utilise Pluggable Authentication Modules (PAM) if your system
-supports it. PAM is standard on Redhat and Debian Linux and on Solaris.
+supports it. PAM is standard on Redhat and Debian Linux, Solaris and
+HP-UX 11.
+
+NB. If you operating system supports /dev/random, you should configure
+OpenSSL to use it. OpenSSH relies on OpenSSL's direct support of
+/dev/random. If you don't you will have to rely on ssh-rand-helper, which
+is inferior to a good kernel-based solution.
PAM:
http://www.kernel.org/pub/linux/libs/pam/
GNOME:
http://www.gnome.org/
-Alternatively, Jim Knoble <jmknoble@pobox.com> has written an excellent X11
+Alternatively, Jim Knoble <jmknoble@jmknoble.cx> has written an excellent X11
passphrase requester. This is maintained separately at:
http://www.ntrnet.net/~jmknoble/software/x11-ssh-askpass/index.html
-If you are planning to use OpenSSH on a Unix which lacks a Kernel random
-number generator (/dev/urandom), you may want to install the Entropy
-Gathering Daemon (or similar). You will also need to specify the
---with-egd-pool option to ./configure. OpenSSH 2.0 includes some
-peliminary built-in randomness collection, but it is not as well
-tested as EGD.
+PRNGD:
+
+If your system lacks Kernel based random collection, the use of Lutz
+Jaenicke's PRNGd is recommended.
+
+http://www.aet.tu-cottbus.de/personen/jaenicke/postfix_tls/prngd.html
EGD:
+
+The Entropy Gathering Daemon (EGD) is supported if you have a system which
+lacks /dev/random and don't want to use OpenSSH's internal entropy collection.
+
http://www.lothar.com/tech/crypto/
-GNU Make:
-ftp://ftp.gnu.org/gnu/make/
+S/Key Libraries:
+http://www.sparc.spb.su/solaris/skey/
-OpenSSH has only been tested with GNU make. It may work with other
-'make' programs, but you are on your own.
+If you wish to use --with-skey then you will need the above library
+installed. No other current S/Key library is currently known to be
+supported.
2. Building / Installation
--------------------------
This will install the binaries in /opt/{bin,lib,sbin}, but will place the
configuration files in /etc/ssh.
-If you are using PAM, you will need to manually install a PAM
-control file as "/etc/pam.d/sshd" (or wherever your system
-prefers to keep them). A generic PAM configuration is included as
-"contrib/sshd.pam.generic", you may need to edit it before using it on
-your system. If you are using a recent version of Redhat Linux, the
-config file in contrib/redhat/sshd.pam should be more useful.
+If you are using PAM, you may need to manually install a PAM control
+file as "/etc/pam.d/sshd" (or wherever your system prefers to keep
+them). Note that the service name used to start PAM is __progname,
+which is the basename of the path of your sshd (e.g., the service name
+for /usr/sbin/osshd will be osshd). If you have renamed your sshd
+executable, your PAM configuration may need to be modified.
+
+A generic PAM configuration is included as "contrib/sshd.pam.generic",
+you may need to edit it before using it on your system. If you are
+using a recent version of Red Hat Linux, the config file in
+contrib/redhat/sshd.pam should be more useful. Failure to install a
+valid PAM file may result in an inability to use password
+authentication. On HP-UX 11 and Solaris, the standard /etc/pam.conf
+configuration will work with sshd (sshd will match the other service
+name).
There are a few other options to the configure script:
---with-rsh=PATH allows you to specify the path to your rsh program.
-Normally ./configure will search the current $PATH for 'rsh'. You
-may need to specify this option if rsh is not in your path or has a
-different name.
-
---without-pam will disable PAM support. PAM is automatically detected
-and switched on if found.
+--with-pam enables PAM support.
--enable-gnome-askpass will build the GNOME passphrase dialog. You
need a working installation of GNOME, including the development
headers, for this to work.
---with-random=/some/file allows you to specify an alternate source of
-random numbers (the default is /dev/urandom). Unless you are absolutly
-sure of what you are doing, it is best to leave this alone.
+--with-prngd-socket=/some/file allows you to enable EGD or PRNGD
+support and to specify a PRNGd socket. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
+collection support.
---with-egd-pool=/some/file allows you to enable Entropy Gathering
-Daemon support and to specify a EGD pool socket. You may want to
-use this if your Unix does not support the /dev/urandom device (or
-similar). The file argument refers to the EGD pool file, not the
-EGD program itself. Please refer to the EGD documentation.
+--with-prngd-port=portnum allows you to enable EGD or PRNGD support
+and to specify a EGD localhost TCP port. Use this if your Unix lacks
+/dev/random and you don't want to use OpenSSH's builtin entropy
+collection support.
--with-lastlog=FILE will specify the location of the lastlog file.
./configure searches a few locations for lastlog, but may not find
--without-lastlog will disable lastlog support entirely.
+--with-osfsia, --without-osfsia will enable or disable OSF1's Security
+Integration Architecture. The default for OSF1 machines is enable.
+
--with-kerberos4=PATH will enable Kerberos IV support. You will need
to have the Kerberos libraries and header files installed for this
to work. Use the optional PATH argument to specify the root of your
to work. Use the optional PATH argument to specify the root of your
AFS installation. AFS requires Kerberos support to be enabled.
---with-skey will enable S/Key one time password support. You will need
-the S/Key libraries and header files installed for this to work.
+--with-skey=PATH will enable S/Key one time password support. You will
+need the S/Key libraries and header files installed for this to work.
--with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny)
support. You will need libwrap.a and tcpd.h installed.
--with-xauth=PATH specifies the location of the xauth binary
---with-ipv4-default instructs OpenSSH to use IPv4 by default for new
-connections. Normally OpenSSH will try attempt to lookup both IPv6 and
-IPv4 addresses. On Linux/glibc-2.1.2 this causes long delays in name
-resolution. If this option is specified, you can still attempt to
-connect to IPv6 addresses using the command line option '-6'.
-
--with-ssl-dir=DIR allows you to specify where your OpenSSL libraries
are installed.
--with-4in6 Check for IPv4 in IPv6 mapped addresses and convert them to
real (AF_INET) IPv4 addresses. Works around some quirks on Linux.
+--with-opensc=DIR
+--with-sectok=DIR allows for OpenSC or sectok smartcard libraries to
+be used with OpenSSH. See 'README.smartcard' for more details.
+
If you need to pass special options to the compiler or linker, you
-can specify these as enviornment variables before running ./configure.
+can specify these as environment variables before running ./configure.
For example:
-CFLAGS="-O -m486" LFLAGS="-s" LIBS="-lrubbish" LD="/usr/foo/ld" ./configure
+CFLAGS="-O -m486" LDFLAGS="-s" LIBS="-lrubbish" LD="/usr/foo/ld" ./configure
3. Configuration
----------------
review it to ensure that it matches your security requirements.
To generate a host key, run "make host-key". Alternately you can do so
-manually using the following command:
+manually using the following commands:
-/usr/bin/ssh-keygen -b 1024 -f /etc/ssh/ssh_host_key -N ''
+ ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
+ ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
+ ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
Replacing /etc/ssh with the correct path to the configuration directory.
(${prefix}/etc or whatever you specified with --sysconfdir during
If you experience problems compiling, installing or running OpenSSH.
Please refer to the "reporting bugs" section of the webpage at
-http://violet.ibs.com.au/openssh/
+http://www.openssh.com/
+
+$Id$
andersk / openssh.git / blobdiff