*/
#include "includes.h"
-RCSID("$OpenBSD: servconf.c,v 1.93 2001/12/05 10:06:12 deraadt Exp $");
+RCSID("$OpenBSD: servconf.c,v 1.94 2001/12/06 13:30:05 markus Exp $");
#if defined(KRB4) || defined(KRB5)
#include <krb.h>
sBanner, sReverseMappingCheck, sHostbasedAuthentication,
sHostbasedUsesNameFromPacketOnly, sClientAliveInterval,
sClientAliveCountMax, sAuthorizedKeysFile, sAuthorizedKeysFile2,
- sDeprecated
+ sDeprecated
} ServerOpCodes;
/* Textual representation of the tokens. */
options->listen_addrs = aitop;
}
-/* Reads the server configuration file. */
-
-void
-read_server_config(ServerOptions *options, const char *filename)
+int
+process_server_config_line(ServerOptions *options, char *line,
+ const char *filename, int linenum)
{
- FILE *f;
- char line[1024];
char *cp, **charptr, *arg, *p;
- int linenum, *intptr, value;
- int bad_options = 0;
+ int *intptr, value;
ServerOpCodes opcode;
int i, n;
- f = fopen(filename, "r");
- if (!f) {
- perror(filename);
- exit(1);
- }
- linenum = 0;
- while (fgets(line, sizeof(line), f)) {
- linenum++;
- cp = line;
+ cp = line;
+ arg = strdelim(&cp);
+ /* Ignore leading whitespace */
+ if (*arg == '\0')
arg = strdelim(&cp);
- /* Ignore leading whitespace */
- if (*arg == '\0')
- arg = strdelim(&cp);
- if (!arg || !*arg || *arg == '#')
- continue;
- intptr = NULL;
- charptr = NULL;
- opcode = parse_token(arg, filename, linenum);
- switch (opcode) {
- case sBadOption:
- bad_options++;
- continue;
-
- /* Portable-specific options */
- case sPAMAuthenticationViaKbdInt:
- intptr = &options->pam_authentication_via_kbd_int;
- goto parse_flag;
-
- /* Standard Options */
- case sPort:
- /* ignore ports from configfile if cmdline specifies ports */
- if (options->ports_from_cmdline)
- continue;
- if (options->listen_addrs != NULL)
- fatal("%s line %d: ports must be specified before "
- "ListenAdress.", filename, linenum);
- if (options->num_ports >= MAX_PORTS)
- fatal("%s line %d: too many ports.",
- filename, linenum);
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing port number.",
- filename, linenum);
- options->ports[options->num_ports++] = a2port(arg);
- if (options->ports[options->num_ports-1] == 0)
- fatal("%s line %d: Badly formatted port number.",
- filename, linenum);
- break;
+ if (!arg || !*arg || *arg == '#')
+ return 0;
+ intptr = NULL;
+ charptr = NULL;
+ opcode = parse_token(arg, filename, linenum);
+ switch (opcode) {
+ /* Portable-specific options */
+ case sPAMAuthenticationViaKbdInt:
+ intptr = &options->pam_authentication_via_kbd_int;
+ goto parse_flag;
- case sServerKeyBits:
- intptr = &options->server_key_bits;
+ /* Standard Options */
+ case sBadOption:
+ return -1;
+ case sPort:
+ /* ignore ports from configfile if cmdline specifies ports */
+ if (options->ports_from_cmdline)
+ return 0;
+ if (options->listen_addrs != NULL)
+ fatal("%s line %d: ports must be specified before "
+ "ListenAdress.", filename, linenum);
+ if (options->num_ports >= MAX_PORTS)
+ fatal("%s line %d: too many ports.",
+ filename, linenum);
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing port number.",
+ filename, linenum);
+ options->ports[options->num_ports++] = a2port(arg);
+ if (options->ports[options->num_ports-1] == 0)
+ fatal("%s line %d: Badly formatted port number.",
+ filename, linenum);
+ break;
+
+ case sServerKeyBits:
+ intptr = &options->server_key_bits;
parse_int:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing integer value.",
- filename, linenum);
- value = atoi(arg);
- if (*intptr == -1)
- *intptr = value;
- break;
-
- case sLoginGraceTime:
- intptr = &options->login_grace_time;
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing integer value.",
+ filename, linenum);
+ value = atoi(arg);
+ if (*intptr == -1)
+ *intptr = value;
+ break;
+
+ case sLoginGraceTime:
+ intptr = &options->login_grace_time;
parse_time:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing time value.",
- filename, linenum);
- if ((value = convtime(arg)) == -1)
- fatal("%s line %d: invalid time value.",
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing time value.",
+ filename, linenum);
+ if ((value = convtime(arg)) == -1)
+ fatal("%s line %d: invalid time value.",
+ filename, linenum);
+ if (*intptr == -1)
+ *intptr = value;
+ break;
+
+ case sKeyRegenerationTime:
+ intptr = &options->key_regeneration_time;
+ goto parse_time;
+
+ case sListenAddress:
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0' || strncmp(arg, "[]", 2) == 0)
+ fatal("%s line %d: missing inet addr.",
+ filename, linenum);
+ if (*arg == '[') {
+ if ((p = strchr(arg, ']')) == NULL)
+ fatal("%s line %d: bad ipv6 inet addr usage.",
filename, linenum);
- if (*intptr == -1)
- *intptr = value;
+ arg++;
+ memmove(p, p+1, strlen(p+1)+1);
+ } else if (((p = strchr(arg, ':')) == NULL) ||
+ (strchr(p+1, ':') != NULL)) {
+ add_listen_addr(options, arg, 0);
break;
+ }
+ if (*p == ':') {
+ u_short port;
- case sKeyRegenerationTime:
- intptr = &options->key_regeneration_time;
- goto parse_time;
-
- case sListenAddress:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0' || strncmp(arg, "[]", 2) == 0)
- fatal("%s line %d: missing inet addr.",
+ p++;
+ if (*p == '\0')
+ fatal("%s line %d: bad inet addr:port usage.",
filename, linenum);
- if (*arg == '[') {
- if ((p = strchr(arg, ']')) == NULL)
- fatal("%s line %d: bad ipv6 inet addr usage.",
+ else {
+ *(p-1) = '\0';
+ if ((port = a2port(p)) == 0)
+ fatal("%s line %d: bad port number.",
filename, linenum);
- arg++;
- memmove(p, p+1, strlen(p+1)+1);
- } else if (((p = strchr(arg, ':')) == NULL) ||
- (strchr(p+1, ':') != NULL)) {
- add_listen_addr(options, arg, 0);
- break;
+ add_listen_addr(options, arg, port);
}
- if (*p == ':') {
- u_short port;
-
- p++;
- if (*p == '\0')
- fatal("%s line %d: bad inet addr:port usage.",
- filename, linenum);
- else {
- *(p-1) = '\0';
- if ((port = a2port(p)) == 0)
- fatal("%s line %d: bad port number.",
- filename, linenum);
- add_listen_addr(options, arg, port);
- }
- } else if (*p == '\0')
- add_listen_addr(options, arg, 0);
- else
- fatal("%s line %d: bad inet addr usage.",
- filename, linenum);
- break;
-
- case sHostKeyFile:
- intptr = &options->num_host_key_files;
- if (*intptr >= MAX_HOSTKEYS)
- fatal("%s line %d: too many host keys specified (max %d).",
- filename, linenum, MAX_HOSTKEYS);
- charptr = &options->host_key_files[*intptr];
+ } else if (*p == '\0')
+ add_listen_addr(options, arg, 0);
+ else
+ fatal("%s line %d: bad inet addr usage.",
+ filename, linenum);
+ break;
+
+ case sHostKeyFile:
+ intptr = &options->num_host_key_files;
+ if (*intptr >= MAX_HOSTKEYS)
+ fatal("%s line %d: too many host keys specified (max %d).",
+ filename, linenum, MAX_HOSTKEYS);
+ charptr = &options->host_key_files[*intptr];
parse_filename:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing file name.",
- filename, linenum);
- if (*charptr == NULL) {
- *charptr = tilde_expand_filename(arg, getuid());
- /* increase optional counter */
- if (intptr != NULL)
- *intptr = *intptr + 1;
- }
- break;
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing file name.",
+ filename, linenum);
+ if (*charptr == NULL) {
+ *charptr = tilde_expand_filename(arg, getuid());
+ /* increase optional counter */
+ if (intptr != NULL)
+ *intptr = *intptr + 1;
+ }
+ break;
- case sPidFile:
- charptr = &options->pid_file;
- goto parse_filename;
-
- case sPermitRootLogin:
- intptr = &options->permit_root_login;
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing yes/"
- "without-password/forced-commands-only/no "
- "argument.", filename, linenum);
- value = 0; /* silence compiler */
- if (strcmp(arg, "without-password") == 0)
- value = PERMIT_NO_PASSWD;
- else if (strcmp(arg, "forced-commands-only") == 0)
- value = PERMIT_FORCED_ONLY;
- else if (strcmp(arg, "yes") == 0)
- value = PERMIT_YES;
- else if (strcmp(arg, "no") == 0)
- value = PERMIT_NO;
- else
- fatal("%s line %d: Bad yes/"
- "without-password/forced-commands-only/no "
- "argument: %s", filename, linenum, arg);
- if (*intptr == -1)
- *intptr = value;
- break;
+ case sPidFile:
+ charptr = &options->pid_file;
+ goto parse_filename;
- case sIgnoreRhosts:
- intptr = &options->ignore_rhosts;
+ case sPermitRootLogin:
+ intptr = &options->permit_root_login;
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing yes/"
+ "without-password/forced-commands-only/no "
+ "argument.", filename, linenum);
+ value = 0; /* silence compiler */
+ if (strcmp(arg, "without-password") == 0)
+ value = PERMIT_NO_PASSWD;
+ else if (strcmp(arg, "forced-commands-only") == 0)
+ value = PERMIT_FORCED_ONLY;
+ else if (strcmp(arg, "yes") == 0)
+ value = PERMIT_YES;
+ else if (strcmp(arg, "no") == 0)
+ value = PERMIT_NO;
+ else
+ fatal("%s line %d: Bad yes/"
+ "without-password/forced-commands-only/no "
+ "argument: %s", filename, linenum, arg);
+ if (*intptr == -1)
+ *intptr = value;
+ break;
+
+ case sIgnoreRhosts:
+ intptr = &options->ignore_rhosts;
parse_flag:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: missing yes/no argument.",
- filename, linenum);
- value = 0; /* silence compiler */
- if (strcmp(arg, "yes") == 0)
- value = 1;
- else if (strcmp(arg, "no") == 0)
- value = 0;
- else
- fatal("%s line %d: Bad yes/no argument: %s",
- filename, linenum, arg);
- if (*intptr == -1)
- *intptr = value;
- break;
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: missing yes/no argument.",
+ filename, linenum);
+ value = 0; /* silence compiler */
+ if (strcmp(arg, "yes") == 0)
+ value = 1;
+ else if (strcmp(arg, "no") == 0)
+ value = 0;
+ else
+ fatal("%s line %d: Bad yes/no argument: %s",
+ filename, linenum, arg);
+ if (*intptr == -1)
+ *intptr = value;
+ break;
+
+ case sIgnoreUserKnownHosts:
+ intptr = &options->ignore_user_known_hosts;
+ goto parse_flag;
+
+ case sRhostsAuthentication:
+ intptr = &options->rhosts_authentication;
+ goto parse_flag;
+
+ case sRhostsRSAAuthentication:
+ intptr = &options->rhosts_rsa_authentication;
+ goto parse_flag;
+
+ case sHostbasedAuthentication:
+ intptr = &options->hostbased_authentication;
+ goto parse_flag;
+
+ case sHostbasedUsesNameFromPacketOnly:
+ intptr = &options->hostbased_uses_name_from_packet_only;
+ goto parse_flag;
+
+ case sRSAAuthentication:
+ intptr = &options->rsa_authentication;
+ goto parse_flag;
+
+ case sPubkeyAuthentication:
+ intptr = &options->pubkey_authentication;
+ goto parse_flag;
+#if defined(KRB4) || defined(KRB5)
+ case sKerberosAuthentication:
+ intptr = &options->kerberos_authentication;
+ goto parse_flag;
- case sIgnoreUserKnownHosts:
- intptr = &options->ignore_user_known_hosts;
- goto parse_flag;
+ case sKerberosOrLocalPasswd:
+ intptr = &options->kerberos_or_local_passwd;
+ goto parse_flag;
- case sRhostsAuthentication:
- intptr = &options->rhosts_authentication;
- goto parse_flag;
+ case sKerberosTicketCleanup:
+ intptr = &options->kerberos_ticket_cleanup;
+ goto parse_flag;
+#endif
+#if defined(AFS) || defined(KRB5)
+ case sKerberosTgtPassing:
+ intptr = &options->kerberos_tgt_passing;
+ goto parse_flag;
+#endif
+#ifdef AFS
+ case sAFSTokenPassing:
+ intptr = &options->afs_token_passing;
+ goto parse_flag;
+#endif
- case sRhostsRSAAuthentication:
- intptr = &options->rhosts_rsa_authentication;
- goto parse_flag;
+ case sPasswordAuthentication:
+ intptr = &options->password_authentication;
+ goto parse_flag;
- case sHostbasedAuthentication:
- intptr = &options->hostbased_authentication;
- goto parse_flag;
+ case sKbdInteractiveAuthentication:
+ intptr = &options->kbd_interactive_authentication;
+ goto parse_flag;
- case sHostbasedUsesNameFromPacketOnly:
- intptr = &options->hostbased_uses_name_from_packet_only;
- goto parse_flag;
+ case sChallengeResponseAuthentication:
+ intptr = &options->challenge_response_authentication;
+ goto parse_flag;
- case sRSAAuthentication:
- intptr = &options->rsa_authentication;
- goto parse_flag;
+ case sPrintMotd:
+ intptr = &options->print_motd;
+ goto parse_flag;
- case sPubkeyAuthentication:
- intptr = &options->pubkey_authentication;
- goto parse_flag;
-#if defined(KRB4) || defined(KRB5)
- case sKerberosAuthentication:
- intptr = &options->kerberos_authentication;
- goto parse_flag;
+ case sPrintLastLog:
+ intptr = &options->print_lastlog;
+ goto parse_flag;
- case sKerberosOrLocalPasswd:
- intptr = &options->kerberos_or_local_passwd;
- goto parse_flag;
+ case sX11Forwarding:
+ intptr = &options->x11_forwarding;
+ goto parse_flag;
- case sKerberosTicketCleanup:
- intptr = &options->kerberos_ticket_cleanup;
- goto parse_flag;
-#endif
-#if defined(AFS) || defined(KRB5)
- case sKerberosTgtPassing:
- intptr = &options->kerberos_tgt_passing;
- goto parse_flag;
-#endif
-#ifdef AFS
- case sAFSTokenPassing:
- intptr = &options->afs_token_passing;
- goto parse_flag;
-#endif
+ case sX11DisplayOffset:
+ intptr = &options->x11_display_offset;
+ goto parse_int;
- case sPasswordAuthentication:
- intptr = &options->password_authentication;
- goto parse_flag;
-
- case sKbdInteractiveAuthentication:
- intptr = &options->kbd_interactive_authentication;
- goto parse_flag;
-
- case sChallengeResponseAuthentication:
- intptr = &options->challenge_response_authentication;
- goto parse_flag;
-
- case sPrintMotd:
- intptr = &options->print_motd;
- goto parse_flag;
-
- case sPrintLastLog:
- intptr = &options->print_lastlog;
- goto parse_flag;
-
- case sX11Forwarding:
- intptr = &options->x11_forwarding;
- goto parse_flag;
-
- case sX11DisplayOffset:
- intptr = &options->x11_display_offset;
- goto parse_int;
-
- case sXAuthLocation:
- charptr = &options->xauth_location;
- goto parse_filename;
-
- case sStrictModes:
- intptr = &options->strict_modes;
- goto parse_flag;
-
- case sKeepAlives:
- intptr = &options->keepalives;
- goto parse_flag;
-
- case sEmptyPasswd:
- intptr = &options->permit_empty_passwd;
- goto parse_flag;
-
- case sUseLogin:
- intptr = &options->use_login;
- goto parse_flag;
-
- case sGatewayPorts:
- intptr = &options->gateway_ports;
- goto parse_flag;
-
- case sReverseMappingCheck:
- intptr = &options->reverse_mapping_check;
- goto parse_flag;
-
- case sLogFacility:
- intptr = (int *) &options->log_facility;
- arg = strdelim(&cp);
- value = log_facility_number(arg);
- if (value == (SyslogFacility) - 1)
- fatal("%.200s line %d: unsupported log facility '%s'",
- filename, linenum, arg ? arg : "<NONE>");
- if (*intptr == -1)
- *intptr = (SyslogFacility) value;
- break;
+ case sXAuthLocation:
+ charptr = &options->xauth_location;
+ goto parse_filename;
- case sLogLevel:
- intptr = (int *) &options->log_level;
- arg = strdelim(&cp);
- value = log_level_number(arg);
- if (value == (LogLevel) - 1)
- fatal("%.200s line %d: unsupported log level '%s'",
- filename, linenum, arg ? arg : "<NONE>");
- if (*intptr == -1)
- *intptr = (LogLevel) value;
- break;
+ case sStrictModes:
+ intptr = &options->strict_modes;
+ goto parse_flag;
- case sAllowTcpForwarding:
- intptr = &options->allow_tcp_forwarding;
- goto parse_flag;
+ case sKeepAlives:
+ intptr = &options->keepalives;
+ goto parse_flag;
- case sAllowUsers:
- while ((arg = strdelim(&cp)) && *arg != '\0') {
- if (options->num_allow_users >= MAX_ALLOW_USERS)
- fatal("%s line %d: too many allow users.",
- filename, linenum);
- options->allow_users[options->num_allow_users++] = xstrdup(arg);
- }
- break;
+ case sEmptyPasswd:
+ intptr = &options->permit_empty_passwd;
+ goto parse_flag;
- case sDenyUsers:
- while ((arg = strdelim(&cp)) && *arg != '\0') {
- if (options->num_deny_users >= MAX_DENY_USERS)
- fatal( "%s line %d: too many deny users.",
- filename, linenum);
- options->deny_users[options->num_deny_users++] = xstrdup(arg);
- }
- break;
+ case sUseLogin:
+ intptr = &options->use_login;
+ goto parse_flag;
- case sAllowGroups:
- while ((arg = strdelim(&cp)) && *arg != '\0') {
- if (options->num_allow_groups >= MAX_ALLOW_GROUPS)
- fatal("%s line %d: too many allow groups.",
- filename, linenum);
- options->allow_groups[options->num_allow_groups++] = xstrdup(arg);
- }
- break;
+ case sGatewayPorts:
+ intptr = &options->gateway_ports;
+ goto parse_flag;
- case sDenyGroups:
- while ((arg = strdelim(&cp)) && *arg != '\0') {
- if (options->num_deny_groups >= MAX_DENY_GROUPS)
- fatal("%s line %d: too many deny groups.",
- filename, linenum);
- options->deny_groups[options->num_deny_groups++] = xstrdup(arg);
- }
- break;
+ case sReverseMappingCheck:
+ intptr = &options->reverse_mapping_check;
+ goto parse_flag;
- case sCiphers:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing argument.", filename, linenum);
- if (!ciphers_valid(arg))
- fatal("%s line %d: Bad SSH2 cipher spec '%s'.",
- filename, linenum, arg ? arg : "<NONE>");
- if (options->ciphers == NULL)
- options->ciphers = xstrdup(arg);
- break;
+ case sLogFacility:
+ intptr = (int *) &options->log_facility;
+ arg = strdelim(&cp);
+ value = log_facility_number(arg);
+ if (value == (SyslogFacility) - 1)
+ fatal("%.200s line %d: unsupported log facility '%s'",
+ filename, linenum, arg ? arg : "<NONE>");
+ if (*intptr == -1)
+ *intptr = (SyslogFacility) value;
+ break;
+
+ case sLogLevel:
+ intptr = (int *) &options->log_level;
+ arg = strdelim(&cp);
+ value = log_level_number(arg);
+ if (value == (LogLevel) - 1)
+ fatal("%.200s line %d: unsupported log level '%s'",
+ filename, linenum, arg ? arg : "<NONE>");
+ if (*intptr == -1)
+ *intptr = (LogLevel) value;
+ break;
+
+ case sAllowTcpForwarding:
+ intptr = &options->allow_tcp_forwarding;
+ goto parse_flag;
+
+ case sAllowUsers:
+ while ((arg = strdelim(&cp)) && *arg != '\0') {
+ if (options->num_allow_users >= MAX_ALLOW_USERS)
+ fatal("%s line %d: too many allow users.",
+ filename, linenum);
+ options->allow_users[options->num_allow_users++] = xstrdup(arg);
+ }
+ break;
- case sMacs:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing argument.", filename, linenum);
- if (!mac_valid(arg))
- fatal("%s line %d: Bad SSH2 mac spec '%s'.",
- filename, linenum, arg ? arg : "<NONE>");
- if (options->macs == NULL)
- options->macs = xstrdup(arg);
- break;
+ case sDenyUsers:
+ while ((arg = strdelim(&cp)) && *arg != '\0') {
+ if (options->num_deny_users >= MAX_DENY_USERS)
+ fatal( "%s line %d: too many deny users.",
+ filename, linenum);
+ options->deny_users[options->num_deny_users++] = xstrdup(arg);
+ }
+ break;
- case sProtocol:
- intptr = &options->protocol;
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing argument.", filename, linenum);
- value = proto_spec(arg);
- if (value == SSH_PROTO_UNKNOWN)
- fatal("%s line %d: Bad protocol spec '%s'.",
- filename, linenum, arg ? arg : "<NONE>");
- if (*intptr == SSH_PROTO_UNKNOWN)
- *intptr = value;
- break;
+ case sAllowGroups:
+ while ((arg = strdelim(&cp)) && *arg != '\0') {
+ if (options->num_allow_groups >= MAX_ALLOW_GROUPS)
+ fatal("%s line %d: too many allow groups.",
+ filename, linenum);
+ options->allow_groups[options->num_allow_groups++] = xstrdup(arg);
+ }
+ break;
- case sSubsystem:
- if (options->num_subsystems >= MAX_SUBSYSTEMS) {
- fatal("%s line %d: too many subsystems defined.",
- filename, linenum);
- }
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing subsystem name.",
- filename, linenum);
- for (i = 0; i < options->num_subsystems; i++)
- if (strcmp(arg, options->subsystem_name[i]) == 0)
- fatal("%s line %d: Subsystem '%s' already defined.",
- filename, linenum, arg);
- options->subsystem_name[options->num_subsystems] = xstrdup(arg);
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing subsystem command.",
- filename, linenum);
- options->subsystem_command[options->num_subsystems] = xstrdup(arg);
- options->num_subsystems++;
- break;
+ case sDenyGroups:
+ while ((arg = strdelim(&cp)) && *arg != '\0') {
+ if (options->num_deny_groups >= MAX_DENY_GROUPS)
+ fatal("%s line %d: too many deny groups.",
+ filename, linenum);
+ options->deny_groups[options->num_deny_groups++] = xstrdup(arg);
+ }
+ break;
- case sMaxStartups:
- arg = strdelim(&cp);
- if (!arg || *arg == '\0')
- fatal("%s line %d: Missing MaxStartups spec.",
- filename, linenum);
- if ((n = sscanf(arg, "%d:%d:%d",
- &options->max_startups_begin,
- &options->max_startups_rate,
- &options->max_startups)) == 3) {
- if (options->max_startups_begin >
- options->max_startups ||
- options->max_startups_rate > 100 ||
- options->max_startups_rate < 1)
- fatal("%s line %d: Illegal MaxStartups spec.",
- filename, linenum);
- } else if (n != 1)
+ case sCiphers:
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing argument.", filename, linenum);
+ if (!ciphers_valid(arg))
+ fatal("%s line %d: Bad SSH2 cipher spec '%s'.",
+ filename, linenum, arg ? arg : "<NONE>");
+ if (options->ciphers == NULL)
+ options->ciphers = xstrdup(arg);
+ break;
+
+ case sMacs:
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing argument.", filename, linenum);
+ if (!mac_valid(arg))
+ fatal("%s line %d: Bad SSH2 mac spec '%s'.",
+ filename, linenum, arg ? arg : "<NONE>");
+ if (options->macs == NULL)
+ options->macs = xstrdup(arg);
+ break;
+
+ case sProtocol:
+ intptr = &options->protocol;
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing argument.", filename, linenum);
+ value = proto_spec(arg);
+ if (value == SSH_PROTO_UNKNOWN)
+ fatal("%s line %d: Bad protocol spec '%s'.",
+ filename, linenum, arg ? arg : "<NONE>");
+ if (*intptr == SSH_PROTO_UNKNOWN)
+ *intptr = value;
+ break;
+
+ case sSubsystem:
+ if (options->num_subsystems >= MAX_SUBSYSTEMS) {
+ fatal("%s line %d: too many subsystems defined.",
+ filename, linenum);
+ }
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing subsystem name.",
+ filename, linenum);
+ for (i = 0; i < options->num_subsystems; i++)
+ if (strcmp(arg, options->subsystem_name[i]) == 0)
+ fatal("%s line %d: Subsystem '%s' already defined.",
+ filename, linenum, arg);
+ options->subsystem_name[options->num_subsystems] = xstrdup(arg);
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing subsystem command.",
+ filename, linenum);
+ options->subsystem_command[options->num_subsystems] = xstrdup(arg);
+ options->num_subsystems++;
+ break;
+
+ case sMaxStartups:
+ arg = strdelim(&cp);
+ if (!arg || *arg == '\0')
+ fatal("%s line %d: Missing MaxStartups spec.",
+ filename, linenum);
+ if ((n = sscanf(arg, "%d:%d:%d",
+ &options->max_startups_begin,
+ &options->max_startups_rate,
+ &options->max_startups)) == 3) {
+ if (options->max_startups_begin >
+ options->max_startups ||
+ options->max_startups_rate > 100 ||
+ options->max_startups_rate < 1)
fatal("%s line %d: Illegal MaxStartups spec.",
filename, linenum);
- else
- options->max_startups = options->max_startups_begin;
- break;
+ } else if (n != 1)
+ fatal("%s line %d: Illegal MaxStartups spec.",
+ filename, linenum);
+ else
+ options->max_startups = options->max_startups_begin;
+ break;
+
+ case sBanner:
+ charptr = &options->banner;
+ goto parse_filename;
+ /*
+ * These options can contain %X options expanded at
+ * connect time, so that you can specify paths like:
+ *
+ * AuthorizedKeysFile /etc/ssh_keys/%u
+ */
+ case sAuthorizedKeysFile:
+ case sAuthorizedKeysFile2:
+ charptr = (opcode == sAuthorizedKeysFile ) ?
+ &options->authorized_keys_file :
+ &options->authorized_keys_file2;
+ goto parse_filename;
+
+ case sClientAliveInterval:
+ intptr = &options->client_alive_interval;
+ goto parse_time;
+
+ case sClientAliveCountMax:
+ intptr = &options->client_alive_count_max;
+ goto parse_int;
+
+ case sDeprecated:
+ log("%s line %d: Deprecated option %s",
+ filename, linenum, arg);
+ while (arg)
+ arg = strdelim(&cp);
+ break;
+
+ default:
+ fatal("%s line %d: Missing handler for opcode %s (%d)",
+ filename, linenum, arg, opcode);
+ }
+ if ((arg = strdelim(&cp)) != NULL && *arg != '\0')
+ fatal("%s line %d: garbage at end of line; \"%.200s\".",
+ filename, linenum, arg);
+ return 0;
+}
- case sBanner:
- charptr = &options->banner;
- goto parse_filename;
- /*
- * These options can contain %X options expanded at
- * connect time, so that you can specify paths like:
- *
- * AuthorizedKeysFile /etc/ssh_keys/%u
- */
- case sAuthorizedKeysFile:
- case sAuthorizedKeysFile2:
- charptr = (opcode == sAuthorizedKeysFile ) ?
- &options->authorized_keys_file :
- &options->authorized_keys_file2;
- goto parse_filename;
-
- case sClientAliveInterval:
- intptr = &options->client_alive_interval;
- goto parse_time;
-
- case sClientAliveCountMax:
- intptr = &options->client_alive_count_max;
- goto parse_int;
-
- case sDeprecated:
- log("%s line %d: Deprecated option %s",
- filename, linenum, arg);
- while (arg)
- arg = strdelim(&cp);
- break;
+/* Reads the server configuration file. */
- default:
- fatal("%s line %d: Missing handler for opcode %s (%d)",
- filename, linenum, arg, opcode);
- }
- if ((arg = strdelim(&cp)) != NULL && *arg != '\0')
- fatal("%s line %d: garbage at end of line; \"%.200s\".",
- filename, linenum, arg);
+void
+read_server_config(ServerOptions *options, const char *filename)
+{
+ FILE *f;
+ char line[1024];
+ int linenum;
+ int bad_options = 0;
+
+ f = fopen(filename, "r");
+ if (!f) {
+ perror(filename);
+ exit(1);
+ }
+ linenum = 0;
+ while (fgets(line, sizeof(line), f)) {
+ /* Update line number counter. */
+ linenum++;
+ if (process_server_config_line(options, line, filename, linenum) != 0)
+ bad_options++;
}
fclose(f);
if (bad_options > 0)
andersk / openssh.git / blobdiff