-/* RCSID("$Id$"); */
+/*
+ * Author: Tatu Ylonen <ylo@cs.hut.fi>
+ * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
+ * All rights reserved
+ *
+ * As far as I am concerned, the code I have written for this software
+ * can be used freely for any purpose. Any derived versions of this
+ * software must be clearly marked as such, and if the derived work is
+ * incompatible with the protocol description in the RFC file, it must be
+ * called by a name other than "ssh" or "Secure Shell".
+ */
+/*
+ * Copyright (c) 2000 Markus Friedl. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/* RCSID("$OpenBSD: channels.h,v 1.24 2000/12/05 20:34:10 markus Exp $"); */
#ifndef CHANNELS_H
#define CHANNELS_H
/* Definitions for channel types. */
-#define SSH_CHANNEL_FREE 0 /* This channel is free (unused). */
-#define SSH_CHANNEL_X11_LISTENER 1 /* Listening for inet X11 conn. */
-#define SSH_CHANNEL_PORT_LISTENER 2 /* Listening on a port. */
-#define SSH_CHANNEL_OPENING 3 /* waiting for confirmation */
-#define SSH_CHANNEL_OPEN 4 /* normal open two-way channel */
-#define SSH_CHANNEL_CLOSED 5 /* waiting for close confirmation */
-/* SSH_CHANNEL_AUTH_FD 6 authentication fd */
-#define SSH_CHANNEL_AUTH_SOCKET 7 /* authentication socket */
-/* SSH_CHANNEL_AUTH_SOCKET_FD 8 connection to auth socket */
-#define SSH_CHANNEL_X11_OPEN 9 /* reading first X11 packet */
-#define SSH_CHANNEL_INPUT_DRAINING 10 /* sending remaining data to conn */
-#define SSH_CHANNEL_OUTPUT_DRAINING 11 /* sending remaining data to app */
-
-/* Data structure for channel data. This is iniailized in channel_allocate
- and cleared in channel_free. */
-
-typedef struct Channel
-{
- int type; /* channel type/state */
- int self; /* my own channel identifier */
- int remote_id; /* channel identifier for remote peer */
- /* peer can be reached over encrypted connection, via packet-sent */
- int istate; /* input from channel (state of receive half) */
- int ostate; /* output to channel (state of transmit half) */
- int sock; /* data socket, linked to this channel */
- Buffer input; /* data read from socket, to be sent over encrypted connection */
- Buffer output; /* data received over encrypted connection for send on socket */
- char path[200]; /* path for unix domain sockets, or host name for forwards */
- int listening_port; /* port being listened for forwards */
- int host_port; /* remote port to connect for forwards */
- char *remote_name; /* remote hostname */
-} Channel;
+#define SSH_CHANNEL_FREE 0 /* This channel is free (unused). */
+#define SSH_CHANNEL_X11_LISTENER 1 /* Listening for inet X11 conn. */
+#define SSH_CHANNEL_PORT_LISTENER 2 /* Listening on a port. */
+#define SSH_CHANNEL_OPENING 3 /* waiting for confirmation */
+#define SSH_CHANNEL_OPEN 4 /* normal open two-way channel */
+#define SSH_CHANNEL_CLOSED 5 /* waiting for close confirmation */
+#define SSH_CHANNEL_AUTH_SOCKET 6 /* authentication socket */
+#define SSH_CHANNEL_X11_OPEN 7 /* reading first X11 packet */
+#define SSH_CHANNEL_INPUT_DRAINING 8 /* sending remaining data to conn */
+#define SSH_CHANNEL_OUTPUT_DRAINING 9 /* sending remaining data to app */
+#define SSH_CHANNEL_LARVAL 10 /* larval session */
+#define SSH_CHANNEL_RPORT_LISTENER 11 /* Listening to a R-style port */
+#define SSH_CHANNEL_CONNECTING 12
+#define SSH_CHANNEL_MAX_TYPE 13
+
+/*
+ * Data structure for channel data. This is iniailized in channel_allocate
+ * and cleared in channel_free.
+ */
+struct Channel;
+typedef struct Channel Channel;
+
+typedef void channel_callback_fn(int id, void *arg);
+typedef int channel_filter_fn(struct Channel *c, char *buf, int len);
+
+struct Channel {
+ int type; /* channel type/state */
+ int self; /* my own channel identifier */
+ int remote_id; /* channel identifier for remote peer */
+ /* peer can be reached over encrypted connection, via packet-sent */
+ int istate; /* input from channel (state of receive half) */
+ int ostate; /* output to channel (state of transmit half) */
+ int flags; /* close sent/rcvd */
+ int rfd; /* read fd */
+ int wfd; /* write fd */
+ int efd; /* extended fd */
+ int sock; /* sock fd */
+ Buffer input; /* data read from socket, to be sent over
+ * encrypted connection */
+ Buffer output; /* data received over encrypted connection for
+ * send on socket */
+ Buffer extended;
+ char path[200]; /* path for unix domain sockets, or host name
+ * for forwards */
+ int listening_port; /* port being listened for forwards */
+ int host_port; /* remote port to connect for forwards */
+ char *remote_name; /* remote hostname */
+
+ int remote_window;
+ int remote_maxpacket;
+ int local_window;
+ int local_window_max;
+ int local_consumed;
+ int local_maxpacket;
+ int extended_usage;
+
+ char *ctype; /* type */
+
+ /* callback */
+ channel_callback_fn *cb_fn;
+ void *cb_arg;
+ int cb_event;
+ channel_callback_fn *dettach_user;
+
+ /* filter */
+ channel_filter_fn *input_filter;
+};
+
+#define CHAN_EXTENDED_IGNORE 0
+#define CHAN_EXTENDED_READ 1
+#define CHAN_EXTENDED_WRITE 2
+
+/* default window/packet sizes for tcp/x11-fwd-channel */
+#define CHAN_SES_WINDOW_DEFAULT (32*1024)
+#define CHAN_SES_PACKET_DEFAULT (CHAN_SES_WINDOW_DEFAULT/2)
+#define CHAN_TCP_WINDOW_DEFAULT (32*1024)
+#define CHAN_TCP_PACKET_DEFAULT (CHAN_TCP_WINDOW_DEFAULT/2)
+#define CHAN_X11_WINDOW_DEFAULT (4*1024)
+#define CHAN_X11_PACKET_DEFAULT (CHAN_X11_WINDOW_DEFAULT/2)
+
+
+void channel_open(int id);
+void channel_request(int id, char *service, int wantconfirm);
+void channel_request_start(int id, char *service, int wantconfirm);
+void channel_register_callback(int id, int mtype, channel_callback_fn *fn, void *arg);
+void channel_register_cleanup(int id, channel_callback_fn *fn);
+void channel_register_filter(int id, channel_filter_fn *fn);
+void channel_cancel_cleanup(int id);
+Channel *channel_lookup(int id);
+
+int
+channel_new(char *ctype, int type, int rfd, int wfd, int efd,
+ int window, int maxpack, int extended_usage, char *remote_name,
+ int nonblock);
+void
+channel_set_fds(int id, int rfd, int wfd, int efd,
+ int extusage, int nonblock);
+
+void deny_input_open(int type, int plen, void *ctxt);
+
+void channel_input_channel_request(int type, int plen, void *ctxt);
+void channel_input_close(int type, int plen, void *ctxt);
+void channel_input_close_confirmation(int type, int plen, void *ctxt);
+void channel_input_data(int type, int plen, void *ctxt);
+void channel_input_extended_data(int type, int plen, void *ctxt);
+void channel_input_ieof(int type, int plen, void *ctxt);
+void channel_input_oclose(int type, int plen, void *ctxt);
+void channel_input_open_confirmation(int type, int plen, void *ctxt);
+void channel_input_open_failure(int type, int plen, void *ctxt);
+void channel_input_port_open(int type, int plen, void *ctxt);
+void channel_input_window_adjust(int type, int plen, void *ctxt);
+
+/* Sets specific protocol options. */
+void channel_set_options(int hostname_in_open);
+
+/*
+ * Allocate a new channel object and set its type and socket. Remote_name
+ * must have been allocated with xmalloc; this will free it when the channel
+ * is freed.
+ */
+int channel_allocate(int type, int sock, char *remote_name);
+
+/* Free the channel and close its socket. */
+void channel_free(int channel);
+
+/* Add any bits relevant to channels in select bitmasks. */
+void channel_prepare_select(fd_set * readset, fd_set * writeset);
+
+/*
+ * After select, perform any appropriate operations for channels which have
+ * events pending.
+ */
+void channel_after_select(fd_set * readset, fd_set * writeset);
+
+/* If there is data to send to the connection, send some of it now. */
+void channel_output_poll(void);
+
+/* Returns true if no channel has too much buffered data. */
+int channel_not_very_much_buffered_data(void);
+
+/* This closes any sockets that are listening for connections; this removes
+ any unix domain sockets. */
+void channel_stop_listening(void);
+
+/*
+ * Closes the sockets of all channels. This is used to close extra file
+ * descriptors after a fork.
+ */
+void channel_close_all(void);
+
+/* Returns the maximum file descriptor number used by the channels. */
+int channel_max_fd(void);
+
+/* Returns true if there is still an open channel over the connection. */
+int channel_still_open(void);
+
+/*
+ * Returns a string containing a list of all open channels. The list is
+ * suitable for displaying to the user. It uses crlf instead of newlines.
+ * The caller should free the string with xfree.
+ */
+char *channel_open_message(void);
+
+/*
+ * Initiate forwarding of connections to local port "port" through the secure
+ * channel to host:port from remote side.
+ */
+void
+channel_request_local_forwarding(u_short listen_port,
+ const char *host_to_connect, u_short port_to_connect, int gateway_ports);
+void
+channel_request_forwarding(const char *listen_address, u_short listen_port,
+ const char *host_to_connect, u_short port_to_connect, int gateway_ports,
+ int remote_fwd);
+
+/*
+ * Initiate forwarding of connections to port "port" on remote host through
+ * the secure channel to host:port from local side. This never returns if
+ * there was an error. This registers that open requests for that port are
+ * permitted.
+ */
+void
+channel_request_remote_forwarding(u_short port, const char *host,
+ u_short remote_port);
+
+/*
+ * Permits opening to any host/port in SSH_MSG_PORT_OPEN. This is usually
+ * called by the server, because the user could connect to any port anyway,
+ * and the server has no way to know but to trust the client anyway.
+ */
+void channel_permit_all_opens(void);
+
+/*
+ * This is called after receiving CHANNEL_FORWARDING_REQUEST. This initates
+ * listening for the port, and sends back a success reply (or disconnect
+ * message if there was an error). This never returns if there was an error.
+ */
+void channel_input_port_forward_request(int is_root, int gateway_ports);
+
+/*
+ * Creates a port for X11 connections, and starts listening for it. Returns
+ * the display name, or NULL if an error was encountered.
+ */
+char *x11_create_display(int screen);
+
+/*
+ * Creates an internet domain socket for listening for X11 connections.
+ * Returns a suitable value for the DISPLAY variable, or NULL if an error
+ * occurs.
+ */
+char *x11_create_display_inet(int screen, int x11_display_offset);
+
+/*
+ * This is called when SSH_SMSG_X11_OPEN is received. The packet contains
+ * the remote channel number. We should do whatever we want, and respond
+ * with either SSH_MSG_OPEN_CONFIRMATION or SSH_MSG_OPEN_FAILURE.
+ */
+void x11_input_open(int type, int plen, void *ctxt);
+
+/*
+ * Requests forwarding of X11 connections. This should be called on the
+ * client only.
+ */
+void x11_request_forwarding(void);
+
+/*
+ * Requests forwarding for X11 connections, with authentication spoofing.
+ * This should be called in the client only.
+ */
+void
+x11_request_forwarding_with_spoofing(int client_session_id,
+ const char *proto, const char *data);
+
+/* Sends a message to the server to request authentication fd forwarding. */
+void auth_request_forwarding(void);
+
+/*
+ * Returns the name of the forwarded authentication socket. Returns NULL if
+ * there is no forwarded authentication socket. The returned value points to
+ * a static buffer.
+ */
+char *auth_get_socket_name(void);
+
+/*
+ * This is called to process SSH_CMSG_AGENT_REQUEST_FORWARDING on the server.
+ * This starts forwarding authentication requests.
+ */
+int auth_input_request_forwarding(struct passwd * pw);
+
+/* This is called to process an SSH_SMSG_AGENT_OPEN message. */
+void auth_input_open_request(int type, int plen, void *ctxt);
+
+/* XXX */
+int channel_connect_to(const char *host, u_short host_port);
+int channel_connect_by_listen_adress(u_short listen_port);
+int x11_connect_display(void);
#endif