.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $OpenBSD: sshd.8,v 1.194 2003/01/31 21:54:40 jmc Exp $
+.\" $OpenBSD: sshd.8,v 1.207 2005/04/21 06:17:50 djm Exp $
.Dd September 25, 1999
.Dt SSHD 8
.Os
.Sh SYNOPSIS
.Nm sshd
.Bk -words
-.Op Fl deiqtD46
+.Op Fl 46Ddeiqt
.Op Fl b Ar bits
.Op Fl f Ar config_file
.Op Fl g Ar login_grace_time
supports both SSH protocol version 1 and 2 simultaneously.
.Nm
works as follows:
-.Pp
.Ss SSH protocol version 1
-.Pp
Each host has a host-specific RSA key
(normally 1024 bits) used to identify the host.
Additionally, when
host and server keys.
The client compares the
RSA host key against its own database to verify that it has not changed.
-The client then generates a 256 bit random number.
+The client then generates a 256-bit random number.
It encrypts this
random number using both the host key and the server key, and sends
the encrypted number to the server.
.Pp
Next, the server and the client enter an authentication dialog.
The client tries to authenticate itself using
-.Pa .rhosts
-authentication,
-.Pa .rhosts
+.Em .rhosts
authentication combined with RSA host
authentication, RSA challenge-response authentication, or password
based authentication.
.Pp
-Rhosts authentication is normally disabled
-because it is fundamentally insecure, but can be enabled in the server
-configuration file if desired.
-System security is not improved unless
+Regardless of the authentication type, the account is checked to
+ensure that it is accessible. An account is not accessible if it is
+locked, listed in
+.Cm DenyUsers
+or its group is listed in
+.Cm DenyGroups
+\&. The definition of a locked account is system dependant. Some platforms
+have their own account database (eg AIX) and some modify the passwd field (
+.Ql \&*LK\&*
+on Solaris,
+.Ql \&*
+on HP-UX, containing
+.Ql Nologin
+on Tru64 and a leading
+.Ql \&!!
+on Linux). If there is a requirement to disable password authentication
+for the account while allowing still public-key, then the passwd field
+should be set to something other than these values (eg
+.Ql NP
+or
+.Ql \&*NP\&*
+).
+.Pp
.Nm rshd ,
.Nm rlogind ,
and
and
.Xr rsh
into the machine).
-.Pp
.Ss SSH protocol version 2
-.Pp
Version 2 works similarly:
Each host has a host-specific key (RSA or DSA) used to identify the host.
However, when the daemon starts, it does not generate a server key.
This key agreement results in a shared session key.
.Pp
The rest of the session is encrypted using a symmetric cipher, currently
-128 bit AES, Blowfish, 3DES, CAST128, Arcfour, 192 bit AES, or 256 bit AES.
+128-bit AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES.
The client selects the encryption algorithm
to use from those offered by the server.
Additionally, session integrity is provided
user (PubkeyAuthentication) or
client host (HostbasedAuthentication) authentication method,
conventional password authentication and challenge response based methods.
-.Pp
.Ss Command execution and data forwarding
-.Pp
If the client successfully authenticates itself, a dialog for
preparing the session is entered.
At this time the client may request
the client, and both sides exit.
.Pp
.Nm
-can be configured using command-line options or a configuration
-file.
+can be configured using command-line options or a configuration file
+(by default
+.Xr sshd_config 5 ) .
Command-line options override values specified in the
configuration file.
.Pp
.Nm
rereads its configuration file when it receives a hangup signal,
.Dv SIGHUP ,
-by executing itself with the name it was started as, i.e.,
+by executing itself with the name and options it was started with, e.g.,
.Pa /usr/sbin/sshd .
.Pp
The options are as follows:
.Bl -tag -width Ds
+.It Fl 4
+Forces
+.Nm
+to use IPv4 addresses only.
+.It Fl 6
+Forces
+.Nm
+to use IPv6 addresses only.
.It Fl b Ar bits
Specifies the number of bits in the ephemeral protocol version 1
server key (default 768).
+.It Fl D
+When this option is specified,
+.Nm
+will not detach and does not become a daemon.
+This allows easy monitoring of
+.Nm sshd .
.It Fl d
Debug mode.
The server sends verbose debug output to the system
Specifies how often the ephemeral protocol version 1 server key is
regenerated (default 3600 seconds, or one hour).
The motivation for regenerating the key fairly
-often is that the key is not stored anywhere, and after about an hour,
+often is that the key is not stored anywhere, and after about an hour
it becomes impossible to recover the key for decrypting intercepted
communications even if the machine is cracked into or physically
seized.
Can be used to give options in the format used in the configuration file.
This is useful for specifying options for which there is no separate
command-line flag.
+For full details of the options, and their values, see
+.Xr sshd_config 5 .
.It Fl p Ar port
Specifies the port on which the server listens for connections
(default 22).
from making DNS requests unless the authentication
mechanism or configuration requires it.
Authentication mechanisms that may require DNS include
-.Cm RhostsAuthentication ,
.Cm RhostsRSAAuthentication ,
.Cm HostbasedAuthentication
and using a
.Cm AllowUsers
or
.Cm DenyUsers .
-.It Fl D
-When this option is specified
-.Nm
-will not detach and does not become a daemon.
-This allows easy monitoring of
-.Nm sshd .
-.It Fl 4
-Forces
-.Nm
-to use IPv4 addresses only.
-.It Fl 6
-Forces
-.Nm
-to use IPv6 addresses only.
.El
.Sh CONFIGURATION FILE
.Nm
prints last login time and
.Pa /etc/motd
(unless prevented in the configuration file or by
-.Pa $HOME/.hushlogin ;
+.Pa ~/.hushlogin ;
see the
.Sx FILES
section).
.It
Sets up basic environment.
.It
-Reads
-.Pa $HOME/.ssh/environment
-if it exists and users are allowed to change their environment.
+Reads the file
+.Pa ~/.ssh/environment ,
+if it exists, and users are allowed to change their environment.
See the
.Cm PermitUserEnvironment
option in
Changes to user's home directory.
.It
If
-.Pa $HOME/.ssh/rc
+.Pa ~/.ssh/rc
exists, runs it; else if
.Pa /etc/ssh/sshrc
exists, runs
Runs user's shell or command.
.El
.Sh AUTHORIZED_KEYS FILE FORMAT
-.Pa $HOME/.ssh/authorized_keys
+.Pa ~/.ssh/authorized_keys
is the default file that lists the public keys that are
permitted for RSA authentication in protocol version 1
and for public key authentication (PubkeyAuthentication)
.Dq ssh-rsa .
.Pp
Note that lines in this file are usually several hundred bytes long
-(because of the size of the public key encoding).
+(because of the size of the public key encoding) up to a limit of
+8 kilobytes, which permits DSA keys up to 8 kilobits and RSA
+keys up to 16 kilobits.
You don't want to type them in; instead, copy the
.Pa identity.pub ,
.Pa id_dsa.pub
Specifies that in addition to public key authentication, the canonical name
of the remote host must be present in the comma-separated list of
patterns
-.Pf ( Ql *
+.Pf ( Ql \&*
and
-.Ql ?
+.Ql \&?
serve as wildcards).
The list may also contain
patterns negated by prefixing them with
-.Ql ! ;
+.Ql \&! ;
if the canonical host name matches a negated pattern, the key is not accepted.
The purpose
of this option is to optionally increase security: public key authentication
port forwarding such that it may only connect to the specified host and
port.
IPv6 addresses can be specified with an alternative syntax:
-.Ar host/port .
+.Ar host Ns / Ns Ar port .
Multiple
.Cm permitopen
-options may be applied separated by commas. No pattern matching is
-performed on the specified hostnames, they must be literal domains or
-addresses.
+options may be applied separated by commas.
+No pattern matching is performed on the specified hostnames,
+they must be literal domains or addresses.
.El
.Ss Examples
-1024 33 12121.\|.\|.\|312314325 ylo@foo.bar
+1024 33 12121...312314325 ylo@foo.bar
.Pp
-from="*.niksula.hut.fi,!pc.niksula.hut.fi" 1024 35 23.\|.\|.\|2334 ylo@niksula
+from="*.niksula.hut.fi,!pc.niksula.hut.fi" 1024 35 23...2334 ylo@niksula
.Pp
-command="dump /home",no-pty,no-port-forwarding 1024 33 23.\|.\|.\|2323 backup.hut.fi
+command="dump /home",no-pty,no-port-forwarding 1024 33 23...2323 backup.hut.fi
.Pp
-permitopen="10.2.1.55:80",permitopen="10.2.1.56:25" 1024 33 23.\|.\|.\|2323
+permitopen="10.2.1.55:80",permitopen="10.2.1.56:25" 1024 33 23...2323
.Sh SSH_KNOWN_HOSTS FILE FORMAT
The
.Pa /etc/ssh/ssh_known_hosts
and
-.Pa $HOME/.ssh/known_hosts
+.Pa ~/.ssh/known_hosts
files contain host public keys for all known hosts.
The global file should
be prepared by the administrator (optional), and the per-user file is
bits, exponent, modulus, comment.
The fields are separated by spaces.
.Pp
-Hostnames is a comma-separated list of patterns ('*' and '?' act as
+Hostnames is a comma-separated list of patterns
+.Pf ( Ql \&*
+and
+.Ql \&?
+act as
wildcards); each pattern in turn is matched against the canonical host
name (when authenticating a client) or against the user-supplied
name (when authenticating a server).
A pattern may also be preceded by
-.Ql !
+.Ql \&!
to indicate negation: if the host name matches a negated
pattern, it is not accepted (by that line) even if it matched another
pattern on the line.
.Pp
+Alternately, hostnames may be stored in a hashed form which hides host names
+and addresses should the file's contents be disclosed.
+Hashed hostnames start with a
+.Ql |
+character.
+Only one hashed hostname may appear on a single line and none of the above
+negation or wildcard operators may be applied.
+.Pp
Bits, exponent, and modulus are taken directly from the RSA host key; they
can be obtained, e.g., from
.Pa /etc/ssh/ssh_host_key.pub .
and adding the host names at the front.
.Ss Examples
.Bd -literal
-closenet,.\|.\|.\|,130.233.208.41 1024 37 159.\|.\|.93 closenet.hut.fi
+closenet,...,130.233.208.41 1024 37 159...93 closenet.hut.fi
cvs.openbsd.org,199.185.137.3 ssh-rsa AAAA1234.....=
.Ed
+.Bd -literal
+# A hashed hostname
+|1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa
+AAAA1234.....=
+.Ed
.Sh FILES
.Bl -tag -width Ds
.It Pa /etc/ssh/sshd_config
concurrently for different ports, this contains the process ID of the one
started last).
The content of this file is not sensitive; it can be world-readable.
-.It Pa $HOME/.ssh/authorized_keys
+.It Pa ~/.ssh/authorized_keys
Lists the public keys (RSA or DSA) that can be used to log into the user's account.
This file must be readable by root (which may on some machines imply
it being world-readable if the user's home directory resides on an NFS
.Pa id_rsa.pub
files into this file, as described in
.Xr ssh-keygen 1 .
-.It Pa "/etc/ssh/ssh_known_hosts" and "$HOME/.ssh/known_hosts"
+.It Pa "/etc/ssh/ssh_known_hosts", "~/.ssh/known_hosts"
These files are consulted when using rhosts with RSA host
authentication or protocol version 2 hostbased authentication
to check the public key of the host.
These files should be writable only by root/the owner.
.Pa /etc/ssh/ssh_known_hosts
should be world-readable, and
-.Pa $HOME/.ssh/known_hosts
+.Pa ~/.ssh/known_hosts
can, but need not be, world-readable.
+.It Pa /etc/motd
+See
+.Xr motd 5 .
+.It Pa ~/.hushlogin
+This file is used to suppress printing the last login time and
+.Pa /etc/motd ,
+if
+.Cm PrintLastLog
+and
+.Cm PrintMotd ,
+respectively,
+are enabled.
+It does not suppress printing of the banner specified by
+.Cm Banner .
.It Pa /etc/nologin
If this file exists,
.Nm
Access controls that should be enforced by tcp-wrappers are defined here.
Further details are described in
.Xr hosts_access 5 .
-.It Pa $HOME/.rhosts
-This file contains host-username pairs, separated by a space, one per
+.It Pa ~/.rhosts
+This file is used during
+.Cm RhostsRSAAuthentication
+and
+.Cm HostbasedAuthentication
+and contains host-username pairs, separated by a space, one per
line.
The given user on the corresponding host is permitted to log in
without a password.
be writable only by the user; it is recommended that it not be
accessible by others.
.Pp
-If is also possible to use netgroups in the file.
+It is also possible to use netgroups in the file.
Either host or user
name may be of the form +@groupname to specify all hosts or all users
in the group.
-.It Pa $HOME/.shosts
+.It Pa ~/.shosts
For ssh,
this file is exactly the same as for
.Pa .rhosts .
not used by rlogin and rshd, so using this permits access using SSH only.
.It Pa /etc/hosts.equiv
This file is used during
-.Pa .rhosts
+.Cm RhostsRSAAuthentication
+and
+.Cm HostbasedAuthentication
authentication.
In the simplest form, this file contains host names, one per line.
Users on
If the client host/user is successfully matched in this file, login is
automatically permitted provided the client and server user names are the
same.
-Additionally, successful RSA host authentication is normally required.
+Additionally, successful client host key authentication is required.
This file must be writable only by root; it is recommended
that it be world-readable.
.Pp
.Pa /etc/hosts.equiv .
However, this file may be useful in environments that want to run both
rsh/rlogin and ssh.
-.It Pa $HOME/.ssh/environment
+.It Pa ~/.ssh/environment
This file is read into the environment at login (if it exists).
It can only contain empty lines, comment lines (that start with
.Ql # ) ,
controlled via the
.Cm PermitUserEnvironment
option.
-.It Pa $HOME/.ssh/rc
+.It Pa ~/.ssh/rc
If this file exists, it is run with
.Pa /bin/sh
after reading the
readable by anyone else.
.It Pa /etc/ssh/sshrc
Like
-.Pa $HOME/.ssh/rc .
+.Pa ~/.ssh/rc .
This can be used to specify
machine-specific login-time initializations globally.
This file should be writable only by root, and should be world-readable.
.El
-.Sh AUTHORS
-OpenSSH is a derivative of the original and free
-ssh 1.2.12 release by Tatu Ylonen.
-Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
-Theo de Raadt and Dug Song
-removed many bugs, re-added newer features and
-created OpenSSH.
-Markus Friedl contributed the support for SSH
-protocol versions 1.5 and 2.0.
-Niels Provos and Markus Friedl contributed support
-for privilege separation.
.Sh SEE ALSO
.Xr scp 1 ,
.Xr sftp 1 ,
.Xr ssh-add 1 ,
.Xr ssh-agent 1 ,
.Xr ssh-keygen 1 ,
+.Xr chroot 2 ,
+.Xr hosts_access 5 ,
.Xr login.conf 5 ,
.Xr moduli 5 ,
.Xr sshd_config 5 ,
+.Xr inetd 8 ,
.Xr sftp-server 8
.Rs
.%A T. Ylonen
.%D January 2002
.%O work in progress material
.Re
+.Sh AUTHORS
+OpenSSH is a derivative of the original and free
+ssh 1.2.12 release by Tatu Ylonen.
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
+Theo de Raadt and Dug Song
+removed many bugs, re-added newer features and
+created OpenSSH.
+Markus Friedl contributed the support for SSH
+protocol versions 1.5 and 2.0.
+Niels Provos and Markus Friedl contributed support
+for privilege separation.