+.Dl $ ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key
+.Pp
+If the fingerprint is already known,
+it can be matched and verified,
+and the key can be accepted.
+If the fingerprint is unknown,
+an alternative method of verification is available:
+SSH fingerprints verified by DNS.
+An additional resource record (RR),
+SSHFP,
+is added to a zonefile
+and the connecting client is able to match the fingerprint
+with that of the key presented.
+.Pp
+In this example, we are connecting a client to a server,
+.Dq host.example.com .
+The SSHFP resource records should first be added to the zonefile for
+host.example.com:
+.Bd -literal -offset indent
+$ ssh-keygen -r host.example.com.
+.Ed
+.Pp
+The output lines will have to be added to the zonefile.
+To check that the zone is answering fingerprint queries:
+.Pp
+.Dl $ dig -t SSHFP host.example.com
+.Pp
+Finally the client connects:
+.Bd -literal -offset indent
+$ ssh -o "VerifyHostKeyDNS ask" host.example.com
+[...]
+Matching host key fingerprint found in DNS.
+Are you sure you want to continue connecting (yes/no)?
+.Ed
+.Pp
+See the
+.Cm VerifyHostKeyDNS
+option in
+.Xr ssh_config 5
+for more information.
+.Sh SSH-BASED VIRTUAL PRIVATE NETWORKS
+.Nm
+contains support for Virtual Private Network (VPN) tunnelling
+using the
+.Xr tun 4
+network pseudo-device,
+allowing two networks to be joined securely.
+The
+.Xr sshd_config 5
+configuration option
+.Cm PermitTunnel
+controls whether the server supports this,
+and at what level (layer 2 or 3 traffic).
+.Pp
+The following example would connect client network 10.0.50.0/24
+with remote network 10.0.99.0/24 using a point-to-point connection
+from 10.1.1.1 to 10.1.1.2,
+provided that the SSH server running on the gateway to the remote network,
+at 192.168.1.15, allows it.
+.Pp
+On the client:
+.Bd -literal -offset indent
+# ssh -f -w 0:1 192.168.1.15 true
+# ifconfig tun0 10.1.1.1 10.1.1.2 netmask 255.255.255.252
+# route add 10.0.99.0/24 10.1.1.2
+.Ed
+.Pp
+On the server:
+.Bd -literal -offset indent
+# ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.252
+# route add 10.0.50.0/24 10.1.1.1
+.Ed
+.Pp
+Client access may be more finely tuned via the
+.Pa /root/.ssh/authorized_keys
+file (see below) and the
+.Cm PermitRootLogin
+server option.
+The following entry would permit connections on
+.Xr tun 4
+device 1 from user
+.Dq jane
+and on tun device 2 from user
+.Dq john ,
+if
+.Cm PermitRootLogin
+is set to
+.Dq forced-commands-only :
+.Bd -literal -offset 2n
+tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... jane
+tunnel="2",command="sh /etc/netstart tun2" ssh-rsa ... john
+.Ed
+.Pp
+Since an SSH-based setup entails a fair amount of overhead,
+it may be more suited to temporary setups,
+such as for wireless VPNs.
+More permanent VPNs are better provided by tools such as
+.Xr ipsecctl 8
+and
+.Xr isakmpd 8 .
andersk / openssh.git / blobdiff