-/* $OpenBSD: ssh.c,v 1.278 2006/07/03 08:54:20 stevesk Exp $ */
+/* $OpenBSD: ssh.c,v 1.332 2010/01/26 01:28:35 djm Exp $ */
/*
* Author: Tatu Ylonen <ylo@cs.hut.fi>
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
#endif
#include <sys/resource.h>
#include <sys/ioctl.h>
-#include <sys/un.h>
+#include <sys/param.h>
+#include <sys/socket.h>
#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <netdb.h>
#ifdef HAVE_PATHS_H
#include <paths.h>
#endif
+#include <pwd.h>
#include <signal.h>
+#include <stdarg.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <netinet/in.h>
+#include <arpa/inet.h>
#include <openssl/evp.h>
#include <openssl/err.h>
+#include "openbsd-compat/openssl-compat.h"
+#include "openbsd-compat/sys-queue.h"
+#include "xmalloc.h"
#include "ssh.h"
#include "ssh1.h"
#include "ssh2.h"
#include "compat.h"
#include "cipher.h"
-#include "xmalloc.h"
#include "packet.h"
#include "buffer.h"
-#include "bufaux.h"
#include "channels.h"
#include "key.h"
#include "authfd.h"
#include "sshpty.h"
#include "match.h"
#include "msg.h"
-#include "monitor_fdpass.h"
#include "uidswap.h"
+#include "roaming.h"
#include "version.h"
#ifdef SMARTCARD
extern char *__progname;
-/* Flag indicating whether debug mode is on. This can be set on the command line. */
+/* Flag indicating whether debug mode is on. May be set on the command line. */
int debug_flag = 0;
/* Flag indicating whether a tty should be allocated */
*/
int fork_after_authentication_flag = 0;
+/* forward stdio to remote host and port */
+char *stdio_forward_host = NULL;
+int stdio_forward_port = 0;
+
/*
* General data structure for command line options and options configurable
* in configuration files. See readconf.h.
int subsystem_flag = 0;
/* # of replies received for global requests */
-static int client_global_request_id = 0;
+static int remote_forward_confirms_received = 0;
/* pid of proxycommand child process */
pid_t proxy_command_pid = 0;
-/* fd to control socket */
-int control_fd = -1;
-
-/* Multiplexing control command */
-static u_int mux_command = 0;
-
-/* Only used in control client mode */
-volatile sig_atomic_t control_client_terminate = 0;
-u_int control_server_pid = 0;
+/* mux.c */
+extern int muxserver_sock;
+extern u_int muxclient_command;
/* Prints a help message to the user. This function never returns. */
usage(void)
{
fprintf(stderr,
-"usage: ssh [-1246AaCfgkMNnqsTtVvXxY] [-b bind_address] [-c cipher_spec]\n"
+"usage: ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec]\n"
" [-D [bind_address:]port] [-e escape_char] [-F configfile]\n"
" [-i identity_file] [-L [bind_address:]port:host:hostport]\n"
" [-l login_name] [-m mac_spec] [-O ctl_cmd] [-o option] [-p port]\n"
" [-R [bind_address:]port:host:hostport] [-S ctl_path]\n"
-" [-w local_tun[:remote_tun]] [user@]hostname [command]\n"
+" [-W host:port] [-w local_tun[:remote_tun]]\n"
+" [user@]hostname [command]\n"
);
exit(255);
}
static int ssh_session(void);
static int ssh_session2(void);
static void load_public_identity_files(void);
-static void control_client(const char *path);
+
+/* from muxclient.c */
+void muxclient(const char *);
+void muxserver_listen(void);
/*
* Main program for the ssh client.
int
main(int ac, char **av)
{
- int i, opt, exit_status;
- char *p, *cp, *line, buf[256];
+ int i, r, opt, exit_status, use_syslog;
+ char *p, *cp, *line, *argv0, buf[MAXPATHLEN];
struct stat st;
struct passwd *pw;
- int dummy;
+ int dummy, timeout_ms;
extern int optind, optreset;
extern char *optarg;
struct servent *sp;
*/
umask(022);
- /* Initialize option structure to indicate that no values have been set. */
+ /*
+ * Initialize option structure to indicate that no values have been
+ * set.
+ */
initialize_options(&options);
/* Parse command-line arguments. */
host = NULL;
+ use_syslog = 0;
+ argv0 = av[0];
again:
- while ((opt = getopt(ac, av,
- "1246ab:c:e:fgi:kl:m:no:p:qstvxACD:F:I:L:MNO:PR:S:TVw:XY")) != -1) {
+ while ((opt = getopt(ac, av, "1246ab:c:e:fgi:kl:m:no:p:qstvx"
+ "ACD:F:I:KL:MNO:PR:S:TVw:W:XYy")) != -1) {
switch (opt) {
case '1':
options.protocol = SSH_PROTO_1;
case 'X':
options.forward_x11 = 1;
break;
+ case 'y':
+ use_syslog = 1;
+ break;
case 'Y':
options.forward_x11 = 1;
options.forward_x11_trusted = 1;
options.gateway_ports = 1;
break;
case 'O':
+ if (stdio_forward_host != NULL)
+ fatal("Cannot specify multiplexing "
+ "command with -W");
+ else if (muxclient_command != 0)
+ fatal("Multiplexing command already specified");
if (strcmp(optarg, "check") == 0)
- mux_command = SSHMUX_COMMAND_ALIVE_CHECK;
+ muxclient_command = SSHMUX_COMMAND_ALIVE_CHECK;
else if (strcmp(optarg, "exit") == 0)
- mux_command = SSHMUX_COMMAND_TERMINATE;
+ muxclient_command = SSHMUX_COMMAND_TERMINATE;
else
fatal("Invalid multiplex command.");
break;
case 'k':
options.gss_deleg_creds = 0;
break;
+ case 'K':
+ options.gss_authentication = 1;
+ options.gss_deleg_creds = 1;
+ break;
case 'i':
if (stat(optarg, &st) < 0) {
fprintf(stderr, "Warning: Identity file %s "
options.tun_open = SSH_TUNMODE_DEFAULT;
options.tun_local = a2tun(optarg, &options.tun_remote);
if (options.tun_local == SSH_TUNID_ERR) {
- fprintf(stderr, "Bad tun device '%s'\n", optarg);
+ fprintf(stderr,
+ "Bad tun device '%s'\n", optarg);
exit(255);
}
break;
+ case 'W':
+ if (stdio_forward_host != NULL)
+ fatal("stdio forward already specified");
+ if (muxclient_command != 0)
+ fatal("Cannot specify stdio forward with -O");
+ if (parse_forward(&fwd, optarg, 1, 0)) {
+ stdio_forward_host = fwd.listen_host;
+ stdio_forward_port = fwd.listen_port;
+ xfree(fwd.connect_host);
+ } else {
+ fprintf(stderr,
+ "Bad stdio forwarding specification '%s'\n",
+ optarg);
+ exit(255);
+ }
+ no_tty_flag = 1;
+ no_shell_flag = 1;
+ options.clear_forwardings = 1;
+ options.exit_on_forward_failure = 1;
+ break;
case 'q':
options.log_level = SYSLOG_LEVEL_QUIET;
break;
break;
case 'p':
options.port = a2port(optarg);
- if (options.port == 0) {
+ if (options.port <= 0) {
fprintf(stderr, "Bad port '%s'\n", optarg);
exit(255);
}
break;
case 'L':
- if (parse_forward(&fwd, optarg))
+ if (parse_forward(&fwd, optarg, 0, 0))
add_local_forward(&options, &fwd);
else {
fprintf(stderr,
break;
case 'R':
- if (parse_forward(&fwd, optarg)) {
+ if (parse_forward(&fwd, optarg, 0, 1)) {
add_remote_forward(&options, &fwd);
} else {
fprintf(stderr,
break;
case 'D':
- cp = p = xstrdup(optarg);
- memset(&fwd, '\0', sizeof(fwd));
- fwd.connect_host = "socks";
- if ((fwd.listen_host = hpdelim(&cp)) == NULL) {
- fprintf(stderr, "Bad dynamic forwarding "
- "specification '%.100s'\n", optarg);
- exit(255);
- }
- if (cp != NULL) {
- fwd.listen_port = a2port(cp);
- fwd.listen_host = cleanhostname(fwd.listen_host);
+ if (parse_forward(&fwd, optarg, 1, 0)) {
+ add_local_forward(&options, &fwd);
} else {
- fwd.listen_port = a2port(fwd.listen_host);
- fwd.listen_host = NULL;
- }
-
- if (fwd.listen_port == 0) {
- fprintf(stderr, "Bad dynamic port '%s'\n",
- optarg);
+ fprintf(stderr,
+ "Bad dynamic forwarding specification "
+ "'%s'\n", optarg);
exit(255);
}
- add_local_forward(&options, &fwd);
- xfree(p);
break;
case 'C':
ac -= optind;
av += optind;
- if (ac > 0 && !host && **av != '-') {
+ if (ac > 0 && !host) {
if (strrchr(*av, '@')) {
p = xstrdup(*av);
cp = strrchr(p, '@');
}
/* Cannot fork to background if no command. */
- if (fork_after_authentication_flag && buffer_len(&command) == 0 && !no_shell_flag)
- fatal("Cannot fork into background without a command to execute.");
+ if (fork_after_authentication_flag && buffer_len(&command) == 0 &&
+ !no_shell_flag)
+ fatal("Cannot fork into background without a command "
+ "to execute.");
/* Allocate a tty by default if no command specified. */
if (buffer_len(&command) == 0)
/* Do not allocate a tty if stdin is not a tty. */
if ((!isatty(fileno(stdin)) || stdin_null_flag) && !force_tty_flag) {
if (tty_flag)
- logit("Pseudo-terminal will not be allocated because stdin is not a terminal.");
+ logit("Pseudo-terminal will not be allocated because "
+ "stdin is not a terminal.");
tty_flag = 0;
}
* Initialize "log" output. Since we are the client all output
* actually goes to stderr.
*/
- log_init(av[0], options.log_level == -1 ? SYSLOG_LEVEL_INFO : options.log_level,
- SYSLOG_FACILITY_USER, 1);
+ log_init(argv0,
+ options.log_level == -1 ? SYSLOG_LEVEL_INFO : options.log_level,
+ SYSLOG_FACILITY_USER, !use_syslog);
/*
* Read per-user configuration file. Ignore the system wide config
if (!read_config_file(config, host, &options, 0))
fatal("Can't open user config file %.100s: "
"%.100s", config, strerror(errno));
- } else {
- snprintf(buf, sizeof buf, "%.100s/%.100s", pw->pw_dir,
+ } else {
+ r = snprintf(buf, sizeof buf, "%s/%s", pw->pw_dir,
_PATH_SSH_USER_CONFFILE);
- (void)read_config_file(buf, host, &options, 1);
+ if (r > 0 && (size_t)r < sizeof(buf))
+ (void)read_config_file(buf, host, &options, 1);
/* Read systemwide configuration file after use config. */
(void)read_config_file(_PATH_HOST_CONFIG_FILE, host,
channel_set_af(options.address_family);
/* reinit */
- log_init(av[0], options.log_level, SYSLOG_FACILITY_USER, 1);
+ log_init(argv0, options.log_level, SYSLOG_FACILITY_USER, !use_syslog);
seed_rng();
if (options.user == NULL)
options.user = xstrdup(pw->pw_name);
+ /* Get default port if port has not been set. */
+ if (options.port == 0) {
+ sp = getservbyname(SSH_SERVICE_NAME, "tcp");
+ options.port = sp ? ntohs(sp->s_port) : SSH_DEFAULT_PORT;
+ }
+
+ if (options.local_command != NULL) {
+ char thishost[NI_MAXHOST];
+
+ if (gethostname(thishost, sizeof(thishost)) == -1)
+ fatal("gethostname: %s", strerror(errno));
+ snprintf(buf, sizeof(buf), "%d", options.port);
+ debug3("expanding LocalCommand: %s", options.local_command);
+ cp = options.local_command;
+ options.local_command = percent_expand(cp, "d", pw->pw_dir,
+ "h", options.hostname? options.hostname : host,
+ "l", thishost, "n", host, "r", options.user, "p", buf,
+ "u", pw->pw_name, (char *)NULL);
+ debug3("expanded LocalCommand: %s", options.local_command);
+ xfree(cp);
+ }
+
if (options.hostname != NULL)
host = options.hostname;
*p = (char)tolower(*p);
}
- /* Get default port if port has not been set. */
- if (options.port == 0) {
- sp = getservbyname(SSH_SERVICE_NAME, "tcp");
- options.port = sp ? ntohs(sp->s_port) : SSH_DEFAULT_PORT;
- }
-
if (options.proxy_command != NULL &&
- strcmp(options.proxy_command, "none") == 0)
+ strcmp(options.proxy_command, "none") == 0) {
+ xfree(options.proxy_command);
options.proxy_command = NULL;
+ }
if (options.control_path != NULL &&
- strcmp(options.control_path, "none") == 0)
+ strcmp(options.control_path, "none") == 0) {
+ xfree(options.control_path);
options.control_path = NULL;
+ }
if (options.control_path != NULL) {
char thishost[NI_MAXHOST];
snprintf(buf, sizeof(buf), "%d", options.port);
cp = tilde_expand_filename(options.control_path,
original_real_uid);
+ xfree(options.control_path);
options.control_path = percent_expand(cp, "p", buf, "h", host,
"r", options.user, "l", thishost, (char *)NULL);
xfree(cp);
}
- if (mux_command != 0 && options.control_path == NULL)
+ if (muxclient_command != 0 && options.control_path == NULL)
fatal("No ControlPath specified for \"-O\" command");
if (options.control_path != NULL)
- control_client(options.control_path);
+ muxclient(options.control_path);
+
+ timeout_ms = options.connection_timeout * 1000;
/* Open a connection to the remote host. */
if (ssh_connect(host, &hostaddr, options.port,
- options.address_family, options.connection_attempts,
+ options.address_family, options.connection_attempts, &timeout_ms,
+ options.tcp_keep_alive,
#ifdef HAVE_CYGWIN
options.use_privileged_port,
#else
options.proxy_command) != 0)
exit(255);
+ if (timeout_ms > 0)
+ debug3("timeout: %d ms remain after connect", timeout_ms);
+
/*
* If we successfully made the connection, load the host private key
* in case we will need it later for combined rsa-rhosts
* Now that we are back to our own permissions, create ~/.ssh
* directory if it doesn't already exist.
*/
- snprintf(buf, sizeof buf, "%.100s%s%.100s", pw->pw_dir, strcmp(pw->pw_dir, "/") ? "/" : "", _PATH_SSH_USER_DIR);
- if (stat(buf, &st) < 0)
+ r = snprintf(buf, sizeof buf, "%s%s%s", pw->pw_dir,
+ strcmp(pw->pw_dir, "/") ? "/" : "", _PATH_SSH_USER_DIR);
+ if (r > 0 && (size_t)r < sizeof(buf) && stat(buf, &st) < 0)
if (mkdir(buf, 0700) < 0)
error("Could not create directory '%.200s'.", buf);
signal(SIGPIPE, SIG_IGN); /* ignore SIGPIPE early */
- /* Log into the remote system. This never returns if the login fails. */
- ssh_login(&sensitive_data, host, (struct sockaddr *)&hostaddr, pw);
+ /* Log into the remote system. Never returns if the login fails. */
+ ssh_login(&sensitive_data, host, (struct sockaddr *)&hostaddr,
+ pw, timeout_ms);
/* We no longer need the private host keys. Clear them now. */
if (sensitive_data.nkeys != 0) {
exit_status = compat20 ? ssh_session2() : ssh_session();
packet_close();
- if (options.control_path != NULL && control_fd != -1)
+ if (options.control_path != NULL && muxserver_sock != -1)
unlink(options.control_path);
/*
return exit_status;
}
+/* Callback for remote forward global requests */
+static void
+ssh_confirm_remote_forward(int type, u_int32_t seq, void *ctxt)
+{
+ Forward *rfwd = (Forward *)ctxt;
+
+ /* XXX verbose() on failure? */
+ debug("remote forward %s for: listen %d, connect %s:%d",
+ type == SSH2_MSG_REQUEST_SUCCESS ? "success" : "failure",
+ rfwd->listen_port, rfwd->connect_host, rfwd->connect_port);
+ if (type == SSH2_MSG_REQUEST_SUCCESS && rfwd->listen_port == 0) {
+ logit("Allocated port %u for remote forward to %s:%d",
+ packet_get_int(),
+ rfwd->connect_host, rfwd->connect_port);
+ }
+
+ if (type == SSH2_MSG_REQUEST_FAILURE) {
+ if (options.exit_on_forward_failure)
+ fatal("Error: remote port forwarding failed for "
+ "listen port %d", rfwd->listen_port);
+ else
+ logit("Warning: remote port forwarding failed for "
+ "listen port %d", rfwd->listen_port);
+ }
+ if (++remote_forward_confirms_received == options.num_remote_forwards) {
+ debug("All remote forwarding requests processed");
+ if (fork_after_authentication_flag) {
+ fork_after_authentication_flag = 0;
+ if (daemon(1, 1) < 0)
+ fatal("daemon() failed: %.200s",
+ strerror(errno));
+ }
+ }
+}
+
+static void
+client_cleanup_stdio_fwd(int id, void *arg)
+{
+ debug("stdio forwarding: done");
+ cleanup_exit(0);
+}
+
+static int
+client_setup_stdio_fwd(const char *host_to_connect, u_short port_to_connect)
+{
+ Channel *c;
+ int in, out;
+
+ debug3("client_setup_stdio_fwd %s:%d", host_to_connect,
+ port_to_connect);
+
+ in = dup(STDIN_FILENO);
+ out = dup(STDOUT_FILENO);
+ if (in < 0 || out < 0)
+ fatal("channel_connect_stdio_fwd: dup() in/out failed");
+
+ if ((c = channel_connect_stdio_fwd(host_to_connect, port_to_connect,
+ in, out)) == NULL)
+ return 0;
+ channel_register_cleanup(c->self, client_cleanup_stdio_fwd, 0);
+ return 1;
+}
+
static void
ssh_init_forwarding(void)
{
int success = 0;
int i;
+ if (stdio_forward_host != NULL) {
+ if (!compat20) {
+ fatal("stdio forwarding require Protocol 2");
+ }
+ if (!client_setup_stdio_fwd(stdio_forward_host,
+ stdio_forward_port))
+ fatal("Failed to connect in stdio forward mode.");
+ }
+
/* Initiate local TCP/IP port forwardings. */
for (i = 0; i < options.num_local_forwards; i++) {
debug("Local connections to %.200s:%d forwarded to remote "
options.local_forwards[i].connect_port,
options.gateway_ports);
}
+ if (i > 0 && success != i && options.exit_on_forward_failure)
+ fatal("Could not request local forwarding.");
if (i > 0 && success == 0)
error("Could not request local forwarding.");
options.remote_forwards[i].listen_port,
options.remote_forwards[i].connect_host,
options.remote_forwards[i].connect_port);
- channel_request_remote_forwarding(
+ if (channel_request_remote_forwarding(
options.remote_forwards[i].listen_host,
options.remote_forwards[i].listen_port,
options.remote_forwards[i].connect_host,
- options.remote_forwards[i].connect_port);
+ options.remote_forwards[i].connect_port) < 0) {
+ if (options.exit_on_forward_failure)
+ fatal("Could not request remote forwarding.");
+ else
+ logit("Warning: Could not request remote "
+ "forwarding.");
+ }
+ client_register_global_confirm(ssh_confirm_remote_forward,
+ &options.remote_forwards[i]);
}
+
+ /* Initiate tunnel forwarding. */
+ if (options.tun_open != SSH_TUNMODE_NO) {
+ if (client_request_tun_fwd(options.tun_open,
+ options.tun_local, options.tun_remote) == -1) {
+ if (options.exit_on_forward_failure)
+ fatal("Could not request tunnel forwarding.");
+ else
+ error("Could not request tunnel forwarding.");
+ }
+ }
}
static void
/* Enable compression if requested. */
if (options.compression) {
- debug("Requesting compression at level %d.", options.compression_level);
+ debug("Requesting compression at level %d.",
+ options.compression_level);
- if (options.compression_level < 1 || options.compression_level > 9)
- fatal("Compression level must be from 1 (fast) to 9 (slow, best).");
+ if (options.compression_level < 1 ||
+ options.compression_level > 9)
+ fatal("Compression level must be from 1 (fast) to "
+ "9 (slow, best).");
/* Send the request. */
packet_start(SSH_CMSG_REQUEST_COMPRESSION);
else if (type == SSH_SMSG_FAILURE)
logit("Warning: Remote host refused compression.");
else
- packet_disconnect("Protocol error waiting for compression response.");
+ packet_disconnect("Protocol error waiting for "
+ "compression response.");
}
/* Allocate a pseudo tty if appropriate. */
if (tty_flag) {
interactive = 1;
have_tty = 1;
} else if (type == SSH_SMSG_FAILURE)
- logit("Warning: Remote host failed or refused to allocate a pseudo tty.");
+ logit("Warning: Remote host failed or refused to "
+ "allocate a pseudo tty.");
else
- packet_disconnect("Protocol error waiting for pty request response.");
+ packet_disconnect("Protocol error waiting for pty "
+ "request response.");
}
/* Request X11 forwarding if enabled and DISPLAY is set. */
display = getenv("DISPLAY");
client_x11_get_proto(display, options.xauth_location,
options.forward_x11_trusted, &proto, &data);
/* Request forwarding with authentication spoofing. */
- debug("Requesting X11 forwarding with authentication spoofing.");
+ debug("Requesting X11 forwarding with authentication "
+ "spoofing.");
x11_request_forwarding_with_spoofing(0, display, proto, data);
/* Read response from the server. */
} else if (type == SSH_SMSG_FAILURE) {
logit("Warning: Remote host denied X11 forwarding.");
} else {
- packet_disconnect("Protocol error waiting for X11 forwarding");
+ packet_disconnect("Protocol error waiting for X11 "
+ "forwarding");
}
}
/* Tell the packet module whether this is an interactive session. */
/* Initiate port forwardings. */
ssh_init_forwarding();
- /* If requested, let ssh continue in the background. */
- if (fork_after_authentication_flag)
+ /* Execute a local command */
+ if (options.local_command != NULL &&
+ options.permit_local_command)
+ ssh_local_cmd(options.local_command);
+
+ /*
+ * If requested and we are not interested in replies to remote
+ * forwarding requests, then let ssh continue in the background.
+ */
+ if (fork_after_authentication_flag &&
+ (!options.exit_on_forward_failure ||
+ options.num_remote_forwards == 0)) {
+ fork_after_authentication_flag = 0;
if (daemon(1, 1) < 0)
fatal("daemon() failed: %.200s", strerror(errno));
+ }
/*
* If a command was specified on the command line, execute the
int len = buffer_len(&command);
if (len > 900)
len = 900;
- debug("Sending command: %.*s", len, (u_char *)buffer_ptr(&command));
+ debug("Sending command: %.*s", len,
+ (u_char *)buffer_ptr(&command));
packet_start(SSH_CMSG_EXEC_CMD);
packet_put_string(buffer_ptr(&command), buffer_len(&command));
packet_send();
options.escape_char : SSH_ESCAPECHAR_NONE, 0);
}
-static void
-ssh_subsystem_reply(int type, u_int32_t seq, void *ctxt)
-{
- int id, len;
-
- id = packet_get_int();
- len = buffer_len(&command);
- if (len > 900)
- len = 900;
- packet_check_eom();
- if (type == SSH2_MSG_CHANNEL_FAILURE)
- fatal("Request for subsystem '%.*s' failed on channel %d",
- len, (u_char *)buffer_ptr(&command), id);
-}
-
-void
-client_global_request_reply_fwd(int type, u_int32_t seq, void *ctxt)
-{
- int i;
-
- i = client_global_request_id++;
- if (i >= options.num_remote_forwards)
- return;
- debug("remote forward %s for: listen %d, connect %s:%d",
- type == SSH2_MSG_REQUEST_SUCCESS ? "success" : "failure",
- options.remote_forwards[i].listen_port,
- options.remote_forwards[i].connect_host,
- options.remote_forwards[i].connect_port);
- if (type == SSH2_MSG_REQUEST_FAILURE)
- logit("Warning: remote port forwarding failed for listen "
- "port %d", options.remote_forwards[i].listen_port);
-}
-
-static void
-ssh_control_listener(void)
-{
- struct sockaddr_un addr;
- mode_t old_umask;
- int addr_len;
-
- if (options.control_path == NULL ||
- options.control_master == SSHCTL_MASTER_NO)
- return;
-
- debug("setting up multiplex master socket");
-
- memset(&addr, '\0', sizeof(addr));
- addr.sun_family = AF_UNIX;
- addr_len = offsetof(struct sockaddr_un, sun_path) +
- strlen(options.control_path) + 1;
-
- if (strlcpy(addr.sun_path, options.control_path,
- sizeof(addr.sun_path)) >= sizeof(addr.sun_path))
- fatal("ControlPath too long");
-
- if ((control_fd = socket(PF_UNIX, SOCK_STREAM, 0)) < 0)
- fatal("%s socket(): %s", __func__, strerror(errno));
-
- old_umask = umask(0177);
- if (bind(control_fd, (struct sockaddr *)&addr, addr_len) == -1) {
- control_fd = -1;
- if (errno == EINVAL || errno == EADDRINUSE)
- fatal("ControlSocket %s already exists",
- options.control_path);
- else
- fatal("%s bind(): %s", __func__, strerror(errno));
- }
- umask(old_umask);
-
- if (listen(control_fd, 64) == -1)
- fatal("%s listen(): %s", __func__, strerror(errno));
-
- set_nonblock(control_fd);
-}
-
/* request pty/x11/agent/tcpfwd/shell for channel */
static void
ssh_session2_setup(int id, void *arg)
client_x11_get_proto(display, options.xauth_location,
options.forward_x11_trusted, &proto, &data);
/* Request forwarding with authentication spoofing. */
- debug("Requesting X11 forwarding with authentication spoofing.");
+ debug("Requesting X11 forwarding with authentication "
+ "spoofing.");
x11_request_forwarding_with_spoofing(id, display, proto, data);
interactive = 1;
/* XXX wait for reply */
packet_send();
}
- if (options.tun_open != SSH_TUNMODE_NO) {
- Channel *c;
- int fd;
-
- debug("Requesting tun.");
- if ((fd = tun_open(options.tun_local,
- options.tun_open)) >= 0) {
- c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
- CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT,
- 0, "tun", 1);
- c->datagram = 1;
-#if defined(SSH_TUN_FILTER)
- if (options.tun_open == SSH_TUNMODE_POINTOPOINT)
- channel_register_filter(c->self, sys_tun_infilter,
- sys_tun_outfilter);
-#endif
- packet_start(SSH2_MSG_CHANNEL_OPEN);
- packet_put_cstring("tun@openssh.com");
- packet_put_int(c->self);
- packet_put_int(c->local_window_max);
- packet_put_int(c->local_maxpacket);
- packet_put_int(options.tun_open);
- packet_put_int(options.tun_remote);
- packet_send();
- }
- }
-
client_session2_setup(id, tty_flag, subsystem_flag, getenv("TERM"),
- NULL, fileno(stdin), &command, environ, &ssh_subsystem_reply);
+ NULL, fileno(stdin), &command, environ);
packet_set_interactive(interactive);
}
channel_send_open(c->self);
if (!no_shell_flag)
- channel_register_confirm(c->self, ssh_session2_setup, NULL);
+ channel_register_open_confirm(c->self,
+ ssh_session2_setup, NULL);
return c->self;
}
/* XXX should be pre-session */
ssh_init_forwarding();
- ssh_control_listener();
if (!no_shell_flag || (datafellows & SSH_BUG_DUMMYCHAN))
id = ssh_session2_open();
+ /* If we don't expect to open a new session, then disallow it */
+ if (options.control_master == SSHCTL_MASTER_NO &&
+ (datafellows & SSH_NEW_OPENSSH)) {
+ debug("Requesting no-more-sessions@openssh.com");
+ packet_start(SSH2_MSG_GLOBAL_REQUEST);
+ packet_put_cstring("no-more-sessions@openssh.com");
+ packet_put_char(0);
+ packet_send();
+ }
+
/* Execute a local command */
if (options.local_command != NULL &&
options.permit_local_command)
ssh_local_cmd(options.local_command);
+ /* Start listening for multiplex clients */
+ muxserver_listen();
+
/* If requested, let ssh continue in the background. */
- if (fork_after_authentication_flag)
+ if (fork_after_authentication_flag) {
+ fork_after_authentication_flag = 0;
if (daemon(1, 1) < 0)
fatal("daemon() failed: %.200s", strerror(errno));
+ }
+
+ if (options.use_roaming)
+ request_roaming();
return client_loop(tty_flag, tty_flag ?
options.escape_char : SSH_ESCAPECHAR_NONE, id);
load_public_identity_files(void)
{
char *filename, *cp, thishost[NI_MAXHOST];
+ char *pwdir = NULL, *pwname = NULL;
int i = 0;
Key *public;
struct passwd *pw;
if (options.smartcard_device != NULL &&
options.num_identity_files < SSH_MAX_IDENTITY_FILES &&
- (keys = sc_get_keys(options.smartcard_device, NULL)) != NULL ) {
+ (keys = sc_get_keys(options.smartcard_device, NULL)) != NULL) {
int count = 0;
for (i = 0; keys[i] != NULL; i++) {
count++;
- memmove(&options.identity_files[1], &options.identity_files[0],
+ memmove(&options.identity_files[1],
+ &options.identity_files[0],
sizeof(char *) * (SSH_MAX_IDENTITY_FILES - 1));
- memmove(&options.identity_keys[1], &options.identity_keys[0],
+ memmove(&options.identity_keys[1],
+ &options.identity_keys[0],
sizeof(Key *) * (SSH_MAX_IDENTITY_FILES - 1));
options.num_identity_files++;
options.identity_keys[0] = keys[i];
#endif /* SMARTCARD */
if ((pw = getpwuid(original_real_uid)) == NULL)
fatal("load_public_identity_files: getpwuid failed");
+ pwname = xstrdup(pw->pw_name);
+ pwdir = xstrdup(pw->pw_dir);
if (gethostname(thishost, sizeof(thishost)) == -1)
fatal("load_public_identity_files: gethostname: %s",
strerror(errno));
for (; i < options.num_identity_files; i++) {
cp = tilde_expand_filename(options.identity_files[i],
original_real_uid);
- filename = percent_expand(cp, "d", pw->pw_dir,
- "u", pw->pw_name, "l", thishost, "h", host,
+ filename = percent_expand(cp, "d", pwdir,
+ "u", pwname, "l", thishost, "h", host,
"r", options.user, (char *)NULL);
xfree(cp);
public = key_load_public(filename, NULL);
options.identity_files[i] = filename;
options.identity_keys[i] = public;
}
-}
-
-static void
-control_client_sighandler(int signo)
-{
- control_client_terminate = signo;
-}
-
-static void
-control_client_sigrelay(int signo)
-{
- if (control_server_pid > 1)
- kill(control_server_pid, signo);
-}
-
-static int
-env_permitted(char *env)
-{
- int i;
- char name[1024], *cp;
-
- if (strlcpy(name, env, sizeof(name)) >= sizeof(name))
- fatal("env_permitted: name too long");
- if ((cp = strchr(name, '=')) == NULL)
- return (0);
-
- *cp = '\0';
-
- for (i = 0; i < options.num_send_env; i++)
- if (match_pattern(name, options.send_env[i]))
- return (1);
-
- return (0);
-}
-
-static void
-control_client(const char *path)
-{
- struct sockaddr_un addr;
- int i, r, fd, sock, exitval, num_env, addr_len;
- Buffer m;
- char *term;
- extern char **environ;
- u_int flags;
-
- if (mux_command == 0)
- mux_command = SSHMUX_COMMAND_OPEN;
-
- switch (options.control_master) {
- case SSHCTL_MASTER_AUTO:
- case SSHCTL_MASTER_AUTO_ASK:
- debug("auto-mux: Trying existing master");
- /* FALLTHROUGH */
- case SSHCTL_MASTER_NO:
- break;
- default:
- return;
- }
-
- memset(&addr, '\0', sizeof(addr));
- addr.sun_family = AF_UNIX;
- addr_len = offsetof(struct sockaddr_un, sun_path) +
- strlen(path) + 1;
-
- if (strlcpy(addr.sun_path, path,
- sizeof(addr.sun_path)) >= sizeof(addr.sun_path))
- fatal("ControlPath too long");
-
- if ((sock = socket(PF_UNIX, SOCK_STREAM, 0)) < 0)
- fatal("%s socket(): %s", __func__, strerror(errno));
-
- if (connect(sock, (struct sockaddr *)&addr, addr_len) == -1) {
- if (mux_command != SSHMUX_COMMAND_OPEN) {
- fatal("Control socket connect(%.100s): %s", path,
- strerror(errno));
- }
- if (errno == ENOENT)
- debug("Control socket \"%.100s\" does not exist", path);
- else {
- error("Control socket connect(%.100s): %s", path,
- strerror(errno));
- }
- close(sock);
- return;
- }
-
- if (stdin_null_flag) {
- if ((fd = open(_PATH_DEVNULL, O_RDONLY)) == -1)
- fatal("open(/dev/null): %s", strerror(errno));
- if (dup2(fd, STDIN_FILENO) == -1)
- fatal("dup2: %s", strerror(errno));
- if (fd > STDERR_FILENO)
- close(fd);
- }
-
- term = getenv("TERM");
-
- flags = 0;
- if (tty_flag)
- flags |= SSHMUX_FLAG_TTY;
- if (subsystem_flag)
- flags |= SSHMUX_FLAG_SUBSYS;
- if (options.forward_x11)
- flags |= SSHMUX_FLAG_X11_FWD;
- if (options.forward_agent)
- flags |= SSHMUX_FLAG_AGENT_FWD;
-
- buffer_init(&m);
-
- /* Send our command to server */
- buffer_put_int(&m, mux_command);
- buffer_put_int(&m, flags);
- if (ssh_msg_send(sock, SSHMUX_VER, &m) == -1)
- fatal("%s: msg_send", __func__);
- buffer_clear(&m);
-
- /* Get authorisation status and PID of controlee */
- if (ssh_msg_recv(sock, &m) == -1)
- fatal("%s: msg_recv", __func__);
- if (buffer_get_char(&m) != SSHMUX_VER)
- fatal("%s: wrong version", __func__);
- if (buffer_get_int(&m) != 1)
- fatal("Connection to master denied");
- control_server_pid = buffer_get_int(&m);
-
- buffer_clear(&m);
-
- switch (mux_command) {
- case SSHMUX_COMMAND_ALIVE_CHECK:
- fprintf(stderr, "Master running (pid=%d)\r\n",
- control_server_pid);
- exit(0);
- case SSHMUX_COMMAND_TERMINATE:
- fprintf(stderr, "Exit request sent.\r\n");
- exit(0);
- case SSHMUX_COMMAND_OPEN:
- /* continue below */
- break;
- default:
- fatal("silly mux_command %d", mux_command);
- }
-
- /* SSHMUX_COMMAND_OPEN */
- buffer_put_cstring(&m, term ? term : "");
- buffer_append(&command, "\0", 1);
- buffer_put_cstring(&m, buffer_ptr(&command));
-
- if (options.num_send_env == 0 || environ == NULL) {
- buffer_put_int(&m, 0);
- } else {
- /* Pass environment */
- num_env = 0;
- for (i = 0; environ[i] != NULL; i++)
- if (env_permitted(environ[i]))
- num_env++; /* Count */
-
- buffer_put_int(&m, num_env);
-
- for (i = 0; environ[i] != NULL && num_env >= 0; i++)
- if (env_permitted(environ[i])) {
- num_env--;
- buffer_put_cstring(&m, environ[i]);
- }
- }
-
- if (ssh_msg_send(sock, SSHMUX_VER, &m) == -1)
- fatal("%s: msg_send", __func__);
-
- mm_send_fd(sock, STDIN_FILENO);
- mm_send_fd(sock, STDOUT_FILENO);
- mm_send_fd(sock, STDERR_FILENO);
-
- /* Wait for reply, so master has a chance to gather ttymodes */
- buffer_clear(&m);
- if (ssh_msg_recv(sock, &m) == -1)
- fatal("%s: msg_recv", __func__);
- if (buffer_get_char(&m) != SSHMUX_VER)
- fatal("%s: wrong version", __func__);
- buffer_free(&m);
-
- signal(SIGHUP, control_client_sighandler);
- signal(SIGINT, control_client_sighandler);
- signal(SIGTERM, control_client_sighandler);
- signal(SIGWINCH, control_client_sigrelay);
-
- if (tty_flag)
- enter_raw_mode();
-
- /* Stick around until the controlee closes the client_fd */
- exitval = 0;
- for (;!control_client_terminate;) {
- r = read(sock, &exitval, sizeof(exitval));
- if (r == 0) {
- debug2("Received EOF from master");
- break;
- }
- if (r > 0)
- debug2("Received exit status from master %d", exitval);
- if (r == -1 && errno != EINTR)
- fatal("%s: read %s", __func__, strerror(errno));
- }
-
- if (control_client_terminate)
- debug2("Exiting on signal %d", control_client_terminate);
-
- close(sock);
-
- leave_raw_mode();
-
- if (tty_flag && options.log_level != SYSLOG_LEVEL_QUIET)
- fprintf(stderr, "Connection to master closed.\r\n");
-
- exit(exitval);
+ bzero(pwname, strlen(pwname));
+ xfree(pwname);
+ bzero(pwdir, strlen(pwdir));
+ xfree(pwdir);
}
andersk / openssh.git / blobdiff