.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
-.\" $OpenBSD: ssh.1,v 1.249 2006/01/15 17:37:05 jmc Exp $
-.Dd September 25, 1999
+.\" $OpenBSD: ssh.1,v 1.290 2010/01/11 01:39:46 dtucker Exp $
+.Dd $Mdocdate$
.Dt SSH 1
.Os
.Sh NAME
.Nd OpenSSH SSH client (remote login program)
.Sh SYNOPSIS
.Nm ssh
-.Op Fl 1246AaCfgkMNnqsTtVvXxY
+.Op Fl 1246AaCfgKkMNnqsTtVvXxYy
.Op Fl b Ar bind_address
.Op Fl c Ar cipher_spec
.Oo Fl D\ \&
.Sm on
.Oc
.Op Fl S Ar ctl_path
-.Bk -words
-.Op Fl w Ar tunnel : Ns Ar tunnel
+.Op Fl W Ar host : Ns Ar port
+.Oo Fl w Ar local_tun Ns
+.Op : Ns Ar remote_tun Oc
.Oo Ar user Ns @ Oc Ns Ar hostname
.Op Ar command
-.Ek
.Sh DESCRIPTION
.Nm
(SSH client) is a program for logging into a remote machine and for
.Pp
Agent forwarding should be enabled with caution.
Users with the ability to bypass file permissions on the remote host
-(for the agent's Unix-domain socket)
-can access the local agent through the forwarded connection.
+(for the agent's
+.Ux Ns -domain
+socket) can access the local agent through the forwarded connection.
An attacker cannot obtain key material from the agent,
however they can perform operations on the keys that enable them to
authenticate using the identities loaded into the agent.
.Ar cipher_spec
is a comma-separated list of ciphers
listed in order of preference.
-The supported ciphers are:
-3des-cbc,
-aes128-cbc,
-aes192-cbc,
-aes256-cbc,
-aes128-ctr,
-aes192-ctr,
-aes256-ctr,
-arcfour128,
-arcfour256,
-arcfour,
-blowfish-cbc,
-and
-cast128-cbc.
-The default is:
-.Bd -literal -offset indent
-aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,
-arcfour256,arcfour,aes192-cbc,aes256-cbc,aes128-ctr,
-aes192-ctr,aes256-ctr
-.Ed
+See the
+.Cm Ciphers
+keyword for more information.
.It Fl D Xo
.Sm off
.Oo Ar bind_address : Oc
The recommended way to start X11 programs at a remote site is with
something like
.Ic ssh -f host xterm .
+.Pp
+If the
+.Cm ExitOnForwardFailure
+configuration option is set to
+.Dq yes ,
+then a client started with
+.Fl f
+will wait for all remote port forwards to be successfully established
+before placing itself in the background.
.It Fl g
Allows remote hosts to connect to local forwarded ports.
.It Fl I Ar smartcard_device
.Fl i
options (and multiple identities specified in
configuration files).
+.It Fl K
+Enables GSSAPI-based authentication and forwarding (delegation) of GSSAPI
+credentials to the server.
.It Fl k
Disables forwarding (delegation) of GSSAPI credentials to the server.
.It Fl L Xo
.It ControlPath
.It DynamicForward
.It EscapeChar
+.It ExitOnForwardFailure
.It ForwardAgent
.It ForwardX11
.It ForwardX11Trusted
.It Protocol
.It ProxyCommand
.It PubkeyAuthentication
+.It RekeyLimit
.It RemoteForward
.It RhostsRSAAuthentication
.It RSAAuthentication
.It User
.It UserKnownHostsFile
.It VerifyHostKeyDNS
+.It VisualHostKey
.It XAuthLocation
.El
.It Fl p Ar port
per-host basis in the configuration file.
.It Fl q
Quiet mode.
-Causes all warning and diagnostic messages to be suppressed.
+Causes most warning and diagnostic messages to be suppressed.
.It Fl R Xo
.Sm off
.Oo Ar bind_address : Oc
.Pp
By default, the listening socket on the server will be bound to the loopback
interface only.
-This may be overriden by specifying a
+This may be overridden by specifying a
.Ar bind_address .
An empty
.Ar bind_address ,
.Cm GatewayPorts
option is enabled (see
.Xr sshd_config 5 ) .
+.Pp
+If the
+.Ar port
+argument is
+.Ql 0 ,
+the listen port will be dynamically allocated on the server and reported
+to the client at run time.
.It Fl S Ar ctl_path
Specifies the location of a control socket for connection sharing.
Refer to the description of
Force pseudo-tty allocation.
This can be used to execute arbitrary
screen-based programs on a remote machine, which can be very useful,
-e.g., when implementing menu services.
+e.g. when implementing menu services.
Multiple
.Fl t
options force tty allocation, even if
.Fl v
options increase the verbosity.
The maximum is 3.
-.It Fl w Ar tunnel : Ns Ar tunnel
-Requests a
+.It Fl W Ar host : Ns Ar port
+Requests that standard input and output on the client be forwarded to
+.Ar host
+on
+.Ar port
+over the secure channel.
+Implies
+.Fl N ,
+.Fl T ,
+.Cm ExitOnForwardFailure
+and
+.Cm ClearAllForwardings
+and works with Protocol version 2 only.
+.It Fl w Xo
+.Ar local_tun Ns Op : Ns Ar remote_tun
+.Xc
+Requests
+tunnel
+device forwarding with the specified
.Xr tun 4
-device on the client
-(first
-.Ar tunnel
-arg)
-and server
-(second
-.Ar tunnel
-arg).
+devices between the client
+.Pq Ar local_tun
+and the server
+.Pq Ar remote_tun .
+.Pp
The devices may be specified by numerical ID or the keyword
.Dq any ,
which uses the next available tunnel device.
+If
+.Ar remote_tun
+is not specified, it defaults to
+.Dq any .
See also the
.Cm Tunnel
-directive in
+and
+.Cm TunnelDevice
+directives in
.Xr ssh_config 5 .
+If the
+.Cm Tunnel
+directive is unset, it is set to the default tunnel mode, which is
+.Dq point-to-point .
.It Fl X
Enables X11 forwarding.
This can also be specified on a per-host basis in a configuration file.
Enables trusted X11 forwarding.
Trusted X11 forwardings are not subjected to the X11 SECURITY extension
controls.
+.It Fl y
+Send log information using the
+.Xr syslog 3
+system module.
+By default this information is sent to stderr.
.El
.Pp
.Nm
if an error occurred.
.Sh AUTHENTICATION
The OpenSSH SSH client supports SSH protocols 1 and 2.
-Protocol 2 is the default, with
-.Nm
-falling back to protocol 1 if it detects protocol 2 is unsupported.
-These settings may be altered using the
+The default is to use protocol 2 only,
+though this can be changed via the
.Cm Protocol
option in
-.Xr ssh_config 5 ,
-or enforced using the
+.Xr ssh_config 5
+or the
.Fl 1
and
.Fl 2
options (see above).
Both protocols support similar authentication methods,
-but protocol 2 is preferred since
+but protocol 2 is the default since
it provides additional mechanisms for confidentiality
(the traffic is encrypted using AES, 3DES, Blowfish, CAST128, or Arcfour)
-and integrity (hmac-md5, hmac-sha1, hmac-ripemd160).
+and integrity (hmac-md5, hmac-sha1, umac-64, hmac-ripemd160).
Protocol 1 lacks a strong mechanism for ensuring the
integrity of the connection.
.Pp
The methods available for authentication are:
+GSSAPI-based authentication,
host-based authentication,
public key authentication,
challenge-response authentication,
option can be used to control logins to machines whose
host key is not known or has changed.
.Pp
-.Nm
-can be configured to verify host identification using fingerprint resource
-records (SSHFP) published in DNS.
-The
-.Cm VerifyHostKeyDNS
-option can be used to control how DNS lookups are performed.
-SSHFP resource records can be generated using
-.Xr ssh-keygen 1 .
-.Pp
When the user's identity has been accepted by the server, the server
either executes the given command, or logs into the machine and gives
the user a normal shell on the remote machine.
.It Cm ~C
Open command line.
Currently this allows the addition of port forwardings using the
-.Fl L
-and
+.Fl L ,
.Fl R
+and
+.Fl D
options (see above).
It also allows the cancellation of existing remote port-forwardings
using
-.Fl KR Ar hostport .
+.Sm off
+.Fl KR Oo Ar bind_address : Oc Ar port .
+.Sm on
.Ic !\& Ns Ar command
allows the user to execute a local command if the
.Ic PermitLocalCommand
options above) and
the user is using an authentication agent, the connection to the agent
is automatically forwarded to the remote side.
+.Sh VERIFYING HOST KEYS
+When connecting to a server for the first time,
+a fingerprint of the server's public key is presented to the user
+(unless the option
+.Cm StrictHostKeyChecking
+has been disabled).
+Fingerprints can be determined using
+.Xr ssh-keygen 1 :
+.Pp
+.Dl $ ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key
+.Pp
+If the fingerprint is already known, it can be matched
+and the key can be accepted or rejected.
+Because of the difficulty of comparing host keys
+just by looking at hex strings,
+there is also support to compare host keys visually,
+using
+.Em random art .
+By setting the
+.Cm VisualHostKey
+option to
+.Dq yes ,
+a small ASCII graphic gets displayed on every login to a server, no matter
+if the session itself is interactive or not.
+By learning the pattern a known server produces, a user can easily
+find out that the host key has changed when a completely different pattern
+is displayed.
+Because these patterns are not unambiguous however, a pattern that looks
+similar to the pattern remembered only gives a good probability that the
+host key is the same, not guaranteed proof.
+.Pp
+To get a listing of the fingerprints along with their random art for
+all known hosts, the following command line can be used:
+.Pp
+.Dl $ ssh-keygen -lv -f ~/.ssh/known_hosts
+.Pp
+If the fingerprint is unknown,
+an alternative method of verification is available:
+SSH fingerprints verified by DNS.
+An additional resource record (RR),
+SSHFP,
+is added to a zonefile
+and the connecting client is able to match the fingerprint
+with that of the key presented.
+.Pp
+In this example, we are connecting a client to a server,
+.Dq host.example.com .
+The SSHFP resource records should first be added to the zonefile for
+host.example.com:
+.Bd -literal -offset indent
+$ ssh-keygen -r host.example.com.
+.Ed
+.Pp
+The output lines will have to be added to the zonefile.
+To check that the zone is answering fingerprint queries:
+.Pp
+.Dl $ dig -t SSHFP host.example.com
+.Pp
+Finally the client connects:
+.Bd -literal -offset indent
+$ ssh -o "VerifyHostKeyDNS ask" host.example.com
+[...]
+Matching host key fingerprint found in DNS.
+Are you sure you want to continue connecting (yes/no)?
+.Ed
+.Pp
+See the
+.Cm VerifyHostKeyDNS
+option in
+.Xr ssh_config 5
+for more information.
+.Sh SSH-BASED VIRTUAL PRIVATE NETWORKS
+.Nm
+contains support for Virtual Private Network (VPN) tunnelling
+using the
+.Xr tun 4
+network pseudo-device,
+allowing two networks to be joined securely.
+The
+.Xr sshd_config 5
+configuration option
+.Cm PermitTunnel
+controls whether the server supports this,
+and at what level (layer 2 or 3 traffic).
+.Pp
+The following example would connect client network 10.0.50.0/24
+with remote network 10.0.99.0/24 using a point-to-point connection
+from 10.1.1.1 to 10.1.1.2,
+provided that the SSH server running on the gateway to the remote network,
+at 192.168.1.15, allows it.
+.Pp
+On the client:
+.Bd -literal -offset indent
+# ssh -f -w 0:1 192.168.1.15 true
+# ifconfig tun0 10.1.1.1 10.1.1.2 netmask 255.255.255.252
+# route add 10.0.99.0/24 10.1.1.2
+.Ed
+.Pp
+On the server:
+.Bd -literal -offset indent
+# ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.252
+# route add 10.0.50.0/24 10.1.1.1
+.Ed
+.Pp
+Client access may be more finely tuned via the
+.Pa /root/.ssh/authorized_keys
+file (see below) and the
+.Cm PermitRootLogin
+server option.
+The following entry would permit connections on
+.Xr tun 4
+device 1 from user
+.Dq jane
+and on tun device 2 from user
+.Dq john ,
+if
+.Cm PermitRootLogin
+is set to
+.Dq forced-commands-only :
+.Bd -literal -offset 2n
+tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... jane
+tunnel="2",command="sh /etc/netstart tun2" ssh-rsa ... john
+.Ed
+.Pp
+Since an SSH-based setup entails a fair amount of overhead,
+it may be more suited to temporary setups,
+such as for wireless VPNs.
+More permanent VPNs are better provided by tools such as
+.Xr ipsecctl 8
+and
+.Xr isakmpd 8 .
.Sh ENVIRONMENT
.Nm
will normally set the following environment variables:
this variable is not set.
.It Ev TZ
This variable is set to indicate the present time zone if it
-was set when the daemon was started (i.e., the daemon passes the value
+was set when the daemon was started (i.e. the daemon passes the value
on to new connections).
.It Ev USER
Set to the name of the user logging in.
but allows host-based authentication without permitting login with
rlogin/rsh.
.Pp
+.It ~/.ssh/
+This directory is the default location for all user-specific configuration
+and authentication information.
+There is no general requirement to keep the entire contents of this directory
+secret, but the recommended permissions are read/write/execute for the user,
+and not accessible by others.
+.Pp
.It ~/.ssh/authorized_keys
Lists the public keys (RSA/DSA) that can be used for logging in as this user.
The format of this file is described in the
Contains the public key for authentication.
These files are not
sensitive and can (but need not) be readable by anyone.
-They are
-never used automatically and are not necessary: they are only provided for
-the convenience of the user.
.Pp
.It ~/.ssh/known_hosts
Contains a list of host keys for all hosts the user has logged into
.Xr ssh-agent 1 ,
.Xr ssh-keygen 1 ,
.Xr ssh-keyscan 1 ,
+.Xr tun 4 ,
.Xr hosts.equiv 5 ,
.Xr ssh_config 5 ,
.Xr ssh-keysign 8 ,
.Xr sshd 8
.Rs
-.%A T. Ylonen
-.%A T. Kivinen
-.%A M. Saarinen
-.%A T. Rinne
-.%A S. Lehtinen
-.%T "SSH Protocol Architecture"
-.%N draft-ietf-secsh-architecture-12.txt
-.%D January 2002
-.%O work in progress material
+.%R RFC 4250
+.%T "The Secure Shell (SSH) Protocol Assigned Numbers"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4251
+.%T "The Secure Shell (SSH) Protocol Architecture"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4252
+.%T "The Secure Shell (SSH) Authentication Protocol"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4253
+.%T "The Secure Shell (SSH) Transport Layer Protocol"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4254
+.%T "The Secure Shell (SSH) Connection Protocol"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4255
+.%T "Using DNS to Securely Publish Secure Shell (SSH) Key Fingerprints"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4256
+.%T "Generic Message Exchange Authentication for the Secure Shell Protocol (SSH)"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4335
+.%T "The Secure Shell (SSH) Session Channel Break Extension"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4344
+.%T "The Secure Shell (SSH) Transport Layer Encryption Modes"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4345
+.%T "Improved Arcfour Modes for the Secure Shell (SSH) Transport Layer Protocol"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4419
+.%T "Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol"
+.%D 2006
+.Re
+.Rs
+.%R RFC 4716
+.%T "The Secure Shell (SSH) Public Key File Format"
+.%D 2006
+.Re
+.Rs
+.%T "Hash Visualization: a New Technique to improve Real-World Security"
+.%A A. Perrig
+.%A D. Song
+.%D 1999
+.%O "International Workshop on Cryptographic Techniques and E-Commerce (CrypTEC '99)"
.Re
.Sh AUTHORS
OpenSSH is a derivative of the original and free
andersk / openssh.git / blobdiff