The man2html from jbasney on pkilab2 works whereas the standard one doesn't.

[gssapi-openssh.git] / setup / sshd_config.in

diff --git a/setup/sshd_config.in b/setup/sshd_config.in
index cd0462303b1069ab455f4a64163735b1addee970..309170d004743db8fc423e22d99b6e045a82fa0f 100644 (file)
--- a/setup/sshd_config.in
+++ b/setup/sshd_config.in
@@ -1,4 +1,4 @@
-#      $OpenBSD: sshd_config,v 1.65 2003/08/28 12:54:34 markus Exp $
+#      $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
 
 # This is the sshd server system-wide configuration file.  See
 # sshd_config(5) for more information.
@@ -11,10 +11,15 @@
 # default value.
 
 #Port 22
-#Protocol 2,1
+#AddressFamily any
 #ListenAddress 0.0.0.0
 #ListenAddress ::
 
+# Disable legacy (protocol version 1) support in the server for new
+# installations. In future the default will change to require explicit
+# activation of protocol 1
+Protocol 2
+
 # HostKey for protocol version 1
 #HostKey /etc/ssh/ssh_host_key
 # HostKeys for protocol version 2
@@ -23,10 +28,10 @@
 
 # Lifetime and size of ephemeral version 1 server key
 #KeyRegenerationInterval 1h
-#ServerKeyBits 768
+#ServerKeyBits 1024
 
 # Logging
-#obsoletes QuietMode and FascistLogging
+# obsoletes QuietMode and FascistLogging
 #SyslogFacility AUTH
 #LogLevel INFO
 
@@ -35,6 +40,8 @@
 #LoginGraceTime 2m
 #PermitRootLogin yes
 #StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
 
 #RSAAuthentication yes
 #PubkeyAuthentication yes
@@ -61,6 +68,7 @@
 #KerberosAuthentication no
 #KerberosOrLocalPasswd yes
 #KerberosTicketCleanup yes
+#KerberosGetAFSToken no
 
 # Session hooks: if allowed, specify the commands to execute
 #AllowSessionHooks yes
@@ -69,13 +77,27 @@
 
 # GSSAPI options
 #GSSAPIAuthentication yes
-#GSSAPICleanupCreds yes
-
-# Set this to 'yes' to enable PAM authentication (via challenge-response)
-# and session processing. Depending on your PAM configuration, this may
-# bypass the setting of 'PasswordAuthentication'
+#GSSAPIDelegateCredentials yes
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange yes
+
+# Set this to 'yes' to enable PAM authentication, account processing, 
+# and session processing. If this is enabled, PAM authentication will 
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
 #UsePAM yes
 
+# Set to 'yes' to allow the PAM stack to change the user name during
+# calls to authentication
+#PermitPAMUserChange no
+
+#AllowAgentForwarding yes
 #AllowTcpForwarding yes
 #GatewayPorts no
 X11Forwarding yes
@@ -83,19 +105,41 @@ X11Forwarding yes
 #X11UseLocalhost yes
 #PrintMotd yes
 #PrintLastLog yes
-#KeepAlive yes
+#TCPKeepAlive yes
 #UseLogin no
 #UsePrivilegeSeparation yes
 #PermitUserEnvironment no
-#Compression yes
+#Compression delayed
 #ClientAliveInterval 0
 #ClientAliveCountMax 3
 #UseDNS yes
 #PidFile /var/run/sshd.pid
 #MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
 
 # no default banner path
-#Banner /some/path
+#Banner none
 
 # override default of no subsystems
 Subsystem      sftp    /usr/libexec/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+ 
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts. 
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#      X11Forwarding no
+#      AllowTcpForwarding no
+#      ForceCommand cvs server