+/*
+ *
+ * Copyright (c) 2001 Gert Doering. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
#include "includes.h"
#ifdef _AIX
-#ifdef HAVE_USERSEC_H
-#include <usersec.h>
-#endif /* HAVE_USERSEC_H */
-
#include <uinfo.h>
#include <../xmalloc.h>
-/* AIX limits */
-#if defined(HAVE_GETUSERATTR) && !defined(S_UFSIZE_HARD) && defined(S_UFSIZE)
-# define S_UFSIZE_HARD S_UFSIZE "_hard"
-# define S_UCPU_HARD S_UCPU "_hard"
-# define S_UDATA_HARD S_UDATA "_hard"
-# define S_USTACK_HARD S_USTACK "_hard"
-# define S_URSS_HARD S_URSS "_hard"
-# define S_UCORE_HARD S_UCORE "_hard"
-# define S_UNOFILE_HARD S_UNOFILE "_hard"
-#endif
-
-#if defined(HAVE_GETUSERATTR)
-/*
- * AIX-specific login initialisation
- */
-void
-set_limit(char *user, char *soft, char *hard, int resource, int mult)
-{
- struct rlimit rlim;
- int slim, hlim;
-
- getrlimit(resource, &rlim);
-
- slim = 0;
- if (getuserattr(user, soft, &slim, SEC_INT) != -1) {
- if (slim < 0) {
- rlim.rlim_cur = RLIM_INFINITY;
- } else if (slim != 0) {
- /* See the wackiness below */
- if (rlim.rlim_cur == slim * mult)
- slim = 0;
- else
- rlim.rlim_cur = slim * mult;
- }
- }
- hlim = 0;
- if (getuserattr(user, hard, &hlim, SEC_INT) != -1) {
- if (hlim < 0) {
- rlim.rlim_max = RLIM_INFINITY;
- } else if (hlim != 0) {
- rlim.rlim_max = hlim * mult;
- }
- }
-
- /*
- * XXX For cpu and fsize the soft limit is set to the hard limit
- * if the hard limit is left at its default value and the soft limit
- * is changed from its default value, either by requesting it
- * (slim == 0) or by setting it to the current default. At least
- * that's how rlogind does it. If you're confused you're not alone.
- * Bug or feature? AIX 4.3.1.2
- */
- if ((!strcmp(soft, "fsize") || !strcmp(soft, "cpu"))
- && hlim == 0 && slim != 0)
- rlim.rlim_max = rlim.rlim_cur;
- /* A specified hard limit limits the soft limit */
- else if (hlim > 0 && rlim.rlim_cur > rlim.rlim_max)
- rlim.rlim_cur = rlim.rlim_max;
- /* A soft limit can increase a hard limit */
- else if (rlim.rlim_cur > rlim.rlim_max)
- rlim.rlim_max = rlim.rlim_cur;
-
- if (setrlimit(resource, &rlim) != 0)
- error("setrlimit(%.10s) failed: %.100s", soft, strerror(errno));
-}
-
-void
-set_limits_from_userattr(char *user)
-{
- int mask;
- char buf[16];
-
- set_limit(user, S_UFSIZE, S_UFSIZE_HARD, RLIMIT_FSIZE, 512);
- set_limit(user, S_UCPU, S_UCPU_HARD, RLIMIT_CPU, 1);
- set_limit(user, S_UDATA, S_UDATA_HARD, RLIMIT_DATA, 512);
- set_limit(user, S_USTACK, S_USTACK_HARD, RLIMIT_STACK, 512);
- set_limit(user, S_URSS, S_URSS_HARD, RLIMIT_RSS, 512);
- set_limit(user, S_UCORE, S_UCORE_HARD, RLIMIT_CORE, 512);
-#if defined(S_UNOFILE)
- set_limit(user, S_UNOFILE, S_UNOFILE_HARD, RLIMIT_NOFILE, 1);
-#endif
-
- if (getuserattr(user, S_UMASK, &mask, SEC_INT) != -1) {
- /* Convert decimal to octal */
- (void) snprintf(buf, sizeof(buf), "%d", mask);
- if (sscanf(buf, "%o", &mask) == 1)
- umask(mask);
- }
-}
-#endif /* defined(HAVE_GETUSERATTR) */
-
/*
- * AIX has a "usrinfo" area where logname and
- * other stuff is stored - a few applications
- * actually use this and die if it's not set
+ * AIX has a "usrinfo" area where logname and other stuff is stored -
+ * a few applications actually use this and die if it's not set
+ *
+ * NOTE: TTY= should be set, but since no one uses it and it's hard to
+ * acquire due to privsep code. We will just drop support.
*/
void
-aix_usrinfo(struct passwd *pw, char *tty, int ttyfd)
+aix_usrinfo(struct passwd *pw)
{
u_int i;
- char *cp=NULL;
+ char *cp;
- if (ttyfd == -1)
- tty[0] = '\0';
- cp = xmalloc(22 + strlen(tty) + 2 * strlen(pw->pw_name));
- i = sprintf(cp, "LOGNAME=%s%cNAME=%s%cTTY=%s%c%c", pw->pw_name, 0,
- pw->pw_name, 0, tty, 0, 0);
+ cp = xmalloc(16 + 2 * strlen(pw->pw_name));
+ i = sprintf(cp, "LOGNAME=%s%cNAME=%s%c", pw->pw_name, 0,
+ pw->pw_name, 0);
if (usrinfo(SETUINFO, cp, i) == -1)
fatal("Couldn't set usrinfo: %s", strerror(errno));
debug3("AIX/UsrInfo: set len %d", i);