]> andersk Git - gssapi-openssh.git/blobdiff - openssh/sshd_config.5
Fixed the default tag set.
[gssapi-openssh.git] / openssh / sshd_config.5
index 060249535a9a604f5aa9a5a4995602b8bc08209a..af16ebcaa9e12a720213f8c8ef3371d1bc59a8a6 100644 (file)
@@ -34,8 +34,8 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $OpenBSD: sshd_config.5,v 1.102 2009/02/22 23:59:25 djm Exp $
-.Dd $Mdocdate: February 22 2009 $
+.\" $OpenBSD: sshd_config.5,v 1.106 2009/04/21 15:13:17 stevesk Exp $
+.Dd $Mdocdate: April 21 2009 $
 .Dt SSHD_CONFIG 5
 .Os
 .Sh NAME
 .Dt SSHD_CONFIG 5
 .Os
 .Sh NAME
@@ -176,10 +176,9 @@ then no banner is displayed.
 This option is only available for protocol version 2.
 By default, no banner is displayed.
 .It Cm ChallengeResponseAuthentication
 This option is only available for protocol version 2.
 By default, no banner is displayed.
 .It Cm ChallengeResponseAuthentication
-Specifies whether challenge-response authentication is allowed.
-All authentication styles from
-.Xr login.conf 5
-are supported.
+Specifies whether challenge-response authentication is allowed (e.g. via
+PAM or though authentication styles supported in
+.Xr login.conf 5 )
 The default is
 .Dq yes .
 .It Cm ChrootDirectory
 The default is
 .Dq yes .
 .It Cm ChrootDirectory
@@ -188,6 +187,9 @@ Specifies a path to
 to after authentication.
 This path, and all its components, must be root-owned directories that are
 not writable by any other user or group.
 to after authentication.
 This path, and all its components, must be root-owned directories that are
 not writable by any other user or group.
+After the chroot,
+.Xr sshd 8
+changes the working directory to the user's home directory.
 .Pp
 The path may contain the following tokens that are expanded at runtime once
 the connecting user has been authenticated: %% is replaced by a literal '%',
 .Pp
 The path may contain the following tokens that are expanded at runtime once
 the connecting user has been authenticated: %% is replaced by a literal '%',
@@ -197,7 +199,7 @@ the connecting user has been authenticated: %% is replaced by a literal '%',
 The
 .Cm ChrootDirectory
 must contain the necessary files and directories to support the
 The
 .Cm ChrootDirectory
 must contain the necessary files and directories to support the
-users' session.
+user's session.
 For an interactive session this requires at least a shell, typically
 .Xr sh 1 ,
 and basic
 For an interactive session this requires at least a shell, typically
 .Xr sh 1 ,
 and basic
@@ -215,8 +217,11 @@ devices.
 For file transfer sessions using
 .Dq sftp ,
 no additional configuration of the environment is necessary if the
 For file transfer sessions using
 .Dq sftp ,
 no additional configuration of the environment is necessary if the
-in-process sftp server is used (see
-.Cm Subsystem
+in-process sftp server is used,
+though sessions which use logging do require
+.Pa /dev/log
+inside the chroot directory (see
+.Xr sftp-server 8
 for details).
 .Pp
 The default is not to
 for details).
 .Pp
 The default is not to
@@ -330,6 +335,16 @@ See
 in
 .Xr ssh_config 5
 for more information on patterns.
 in
 .Xr ssh_config 5
 for more information on patterns.
+.It Cm DisableUsageStats
+This keyword can be followed by one of the keywords "true", "enabled", "yes",
+"on" or "1" to disable reporting of usage metrics. Or it can be set to "false",
+"disabled", "no", "off", "0" to enable reporting of usage metrics, which is the
+default. Setting the
+.Cm GLOBUS_USAGE_OPTOUT
+environment variable to "1" will also disable the reporting of usage metrics.
+Disabling reporting of usage metrics will cause the
+.Cm UsageStatsTargets
+setting to be ignored.
 .It Cm ForceCommand
 Forces the execution of the command specified by
 .Cm ForceCommand ,
 .It Cm ForceCommand
 Forces the execution of the command specified by
 .Cm ForceCommand ,
@@ -920,6 +935,111 @@ This avoids infinitely hanging sessions.
 .Pp
 To disable TCP keepalive messages, the value should be set to
 .Dq no .
 .Pp
 To disable TCP keepalive messages, the value should be set to
 .Dq no .
+.It Cm UsageStatsTargets
+This option can be used to specify the target collector hosts to which usage
+metrics should be reported. This setting will be ignored if
+.Cm DisableUsageStats
+is enabled. Multiple targets can be specified separated by comma(s), but no
+space(s). Each target specification is of the format
+.Pa host:port[!tags].
+Tags control what data elements are reported. The following list specifies
+the tags for the corresponding data elements.
+.Pp
+.Bl -item -offset indent -compact
+.It
+.Cm V
+.Sm off
+- OpenSSH version, reported by default.
+.Sm on
+.It
+.Cm v
+.Sm off
+- SSL version, reported by default.
+.Sm on
+.It
+.Cm M
+.Sm off
+- User authentication method used such as "gssapi-keyex", "gssapi-with-mic", etc. Reported by default.
+.Sm on
+.It
+.Cm m
+.Sm off
+- User authentication mechanism used such as "GSI", "Kerberos", etc. Reported by default.
+.Sm on
+.It
+.Cm I
+.Sm off
+- Client IP address. Not reported by default.
+.Sm on
+.It
+.Cm u
+.Sm off
+- User name. Not reported by default.
+.Sm on
+.It
+.Cm U
+.Sm off
+- User DN. Not reported by default.
+.Sm on
+.Pp
+In addition to the above selected information, the following data are
+reported to ALL the specified/default target collectors. There's no way to
+exclude these from being reported other than by disabling the reporting of
+usage metrics altogether:
+.Pp
+.It
+.Cm Component code
+.Sm off
+- 12 for GSI OpenSSH
+.Sm on
+.It
+.Cm Component Data Format version
+.Sm off
+- 0 currently
+.Sm on
+.It
+.Cm IP Address
+.Sm off
+- IP address of reporting server
+.Sm on
+.It
+.Cm Timestamp
+.It
+.Cm Hostname
+.Sm off
+- Host name of reporting server
+.Sm on
+.Pp
+If no tags are specified in a host spec, or the special string "default"
+is specified, the tags VvMm are assumed. A site could choose to allow a
+different set of data to be reported by specifying a different tag set. The
+last  3  tags  I, u and U above are more meant for a local collector that a
+site might like to deploy since they could be construed as private information.
+The special string "all" denotes all tags.
+.El
+.Pp
+By default, Usage Metrics reporting is sent to
+.Dq usage-stats.cilogon.org:4810 .
+This can be made explicit by specifying
+.Dq default
+(all by itself) for the
+target specification as in:
+.Pp
+.Bl -item -offset indent -compact
+.It
+.Cm UsageStatsTargets
+.Sm off
+default
+.Sm on
+.El
+.Pp
+If
+.Cm UsageStatsTargets
+is not specified, a comma-separated list of targets
+(without any tags specified) if specified in the environment variable
+.Cm GLOBUS_USAGE_TARGETS
+will be used.
+.Pp
 .It Cm UseDNS
 Specifies whether
 .Xr sshd 8
 .It Cm UseDNS
 Specifies whether
 .Xr sshd 8
This page took 0.045584 seconds and 4 git commands to generate.