The man2html from jbasney on pkilab2 works whereas the standard one doesn't.

[gssapi-openssh.git] / openssh / sshd_config

diff --git a/openssh/sshd_config b/openssh/sshd_config
index 36429c9d0c72c0d46f1940735074b86eef6e5150..f4ddc83c1ea5de2e6f9b540e270e94830b106620 100644 (file)
--- a/openssh/sshd_config
+++ b/openssh/sshd_config
@@ -1,4 +1,4 @@
-#      $OpenBSD: sshd_config,v 1.59 2002/09/25 11:17:16 markus Exp $
+#      $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
 
 # This is the sshd server system-wide configuration file.  See
 # sshd_config(5) for more information.
@@ -11,10 +11,15 @@
 # default value.
 
 #Port 22
-#Protocol 2,1
+#AddressFamily any
 #ListenAddress 0.0.0.0
 #ListenAddress ::
 
+# Disable legacy (protocol version 1) support in the server for new
+# installations. In future the default will change to require explicit
+# activation of protocol 1
+Protocol 2
+
 # HostKey for protocol version 1
 #HostKey /etc/ssh/ssh_host_key
 # HostKeys for protocol version 2
@@ -22,28 +27,26 @@
 #HostKey /etc/ssh/ssh_host_dsa_key
 
 # Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 3600
-#ServerKeyBits 768
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
 
 # Logging
-#obsoletes QuietMode and FascistLogging
+# obsoletes QuietMode and FascistLogging
 #SyslogFacility AUTH
 #LogLevel INFO
 
 # Authentication:
 
-#LoginGraceTime 120
+#LoginGraceTime 2m
 #PermitRootLogin yes
 #StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
 
 #RSAAuthentication yes
 #PubkeyAuthentication yes
 #AuthorizedKeysFile    .ssh/authorized_keys
 
-# rhosts authentication should not be used
-#RhostsAuthentication no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
 # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
 #RhostsRSAAuthentication no
 # similar for protocol version 2
@@ -51,6 +54,8 @@
 # Change to yes if you don't trust ~/.ssh/known_hosts for
 # RhostsRSAAuthentication and HostbasedAuthentication
 #IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
 
 # To disable tunneled clear text passwords, change to no here!
 #PasswordAuthentication yes
@@ -63,31 +68,83 @@
 #KerberosAuthentication no
 #KerberosOrLocalPasswd yes
 #KerberosTicketCleanup yes
-
-#AFSTokenPassing no
-
-# Kerberos TGT Passing only works with the AFS kaserver
-#KerberosTgtPassing no
-
-# Set this to 'yes' to enable PAM keyboard-interactive authentication 
-# Warning: enabling this may bypass the setting of 'PasswordAuthentication'
-#PAMAuthenticationViaKbdInt no
-
+#KerberosGetAFSToken no
+
+# Session hooks: if allowed, specify the commands to execute
+#AllowSessionHooks yes
+#SessionHookStartupCmd /bin/true
+#SessionHookShutdownCmd /bin/true
+
+# GSSAPI options
+#GSSAPIAuthentication yes
+#GSSAPIDelegateCredentials yes
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange yes
+
+# Set this to 'yes' to enable PAM authentication, account processing, 
+# and session processing. If this is enabled, PAM authentication will 
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+#UsePAM no
+
+# Set to 'yes' to allow the PAM stack to change the user name during
+# calls to authentication
+#PermitPAMUserChange no
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
 #X11Forwarding no
 #X11DisplayOffset 10
 #X11UseLocalhost yes
 #PrintMotd yes
 #PrintLastLog yes
-#KeepAlive yes
+#TCPKeepAlive yes
 #UseLogin no
 #UsePrivilegeSeparation yes
 #PermitUserEnvironment no
-#Compression yes
-
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
 #MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
 # no default banner path
-#Banner /some/path
-#VerifyReverseMapping no
+#Banner none
 
 # override default of no subsystems
 Subsystem      sftp    /usr/libexec/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+ 
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts. 
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#      X11Forwarding no
+#      AllowTcpForwarding no
+#      ForceCommand cvs server
+
+
+# Usage Metrics
+#UsageStatsTargets usage-stats.cilogon.org:4810
+#DisableUsageStats No