DISTPERL=perl
DISTSED=sed
+DISTAWK=awk
AUTORECONF=autoreconf
prefix=@prefix@
sbindir=@sbindir@
libexecdir=@libexecdir@
datadir=@datadir@
+datarootdir=@datarootdir@
mandir=@mandir@
mansubdir=@mansubdir@
sysconfdir=$$GLOBUS_LOCATION/etc/ssh
CFLAGS=@CFLAGS@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
LIBS=@LIBS@
-LIBPAM=@LIBPAM@
-LIBWRAP=@LIBWRAP@
+SSHDLIBS=@SSHDLIBS@
+LIBEDIT=@LIBEDIT@
AR=@AR@
AWK=@AWK@
RANLIB=@RANLIB@
# pathnames.o
#
-LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o buffer.o \
+LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o bufbn.o buffer.o \
canohost.o channels.o cipher.o cipher-acss.o cipher-aes.o \
cipher-bf1.o cipher-ctr.o cipher-3des1.o cleanup.o \
compat.o compress.o crc32.o deattack.o fatal.o hostfile.o \
- log.o match.o moduli.o mpaux.o nchan.o packet.o \
- readpass.o rsa.o tildexpand.o ttymodes.o xmalloc.o \
- atomicio.o key.o dispatch.o kex.o mac.o uuencode.o misc.o \
- rijndael.o ssh-dss.o ssh-rsa.o dh.o kexdh.o kexgex.o \
- kexdhc.o kexgexc.o scard.o msg.o progressmeter.o dns.o \
+ log.o match.o md-sha256.o moduli.o nchan.o packet.o \
+ readpass.o rsa.o ttymodes.o xmalloc.o addrmatch.o \
+ atomicio.o key.o dispatch.o kex.o mac.o uidswap.o uuencode.o misc.o \
+ monitor_fdpass.o rijndael.o ssh-dss.o ssh-rsa.o dh.o kexdh.o \
+ kexgex.o kexdhc.o kexgexc.o scard.o msg.o progressmeter.o dns.o \
pathnames.o \
- entropy.o scard-opensc.o kexgssc.o gss-genr.o
+ entropy.o scard-opensc.o gss-genr.o umac.o jpake.o schnorr.o \
+ kexgssc.o
SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \
- sshconnect.o sshconnect1.o sshconnect2.o
+ sshconnect.o sshconnect1.o sshconnect2.o mux.o
SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o \
- sshpty.o sshlogin.o servconf.o serverloop.o uidswap.o \
+ sshpty.o sshlogin.o servconf.o serverloop.o \
auth.o auth1.o auth2.o auth-options.o session.o \
auth-chall.o auth2-chall.o groupaccess.o \
auth-skey.o auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \
- auth2-none.o auth2-passwd.o auth2-pubkey.o \
- monitor_mm.o monitor.o monitor_wrap.o monitor_fdpass.o \
- kexdhs.o kexgexs.o kexgsss.o \
+ auth2-none.o auth2-passwd.o auth2-pubkey.o auth2-jpake.o \
+ monitor_mm.o monitor.o monitor_wrap.o kexdhs.o kexgexs.o \
auth-krb5.o \
- auth2-gss.o gss-serv.o gss-serv-krb5.o gss-serv-gsi.o \
- loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o
+ auth2-gss.o gss-serv.o gss-serv-krb5.o kexgsss.o\
+ gss-serv-gsi.o \
+ loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \
+ audit.o audit-bsm.o platform.o sftp-server.o sftp-common.o
-MANPAGES = scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out sshd_config.5.out ssh_config.5.out
-MANPAGES_IN = scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 sshd_config.5 ssh_config.5
+MANPAGES = moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out sshd_config.5.out ssh_config.5.out
+MANPAGES_IN = moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 sshd_config.5 ssh_config.5
MANTYPE = @MANTYPE@
CONFIGFILES=sshd_config.out ssh_config.out moduli.out
-e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \
-e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \
-e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \
+ -e 's|/etc/moduli|$(sysconfdir)/moduli|g' \
-e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \
- -e 's|/etc/sshrc|$(sysconfdir)/sshrc|g' \
+ -e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \
-e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \
-e 's|/var/empty|$(PRIVSEP_PATH)|g' \
-e 's|/usr/bin:/bin:/usr/sbin:/sbin|@user_path@|g'
$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS)
- $(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBWRAP) $(LIBPAM) $(LIBS)
+ $(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS)
scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o
- $(LD) -o $@ scp.o progressmeter.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ scp.o progressmeter.o bufaux.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
-sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
- $(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o sftp-server-main.o
+ $(LD) -o $@ sftp-server.o sftp-common.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o
- $(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
+ $(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT)
ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o
$(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
fi
-# fake rule to stop make trying to compile moduli.o into a binary "modulo"
+# fake rule to stop make trying to compile moduli.o into a binary "moduli.o"
moduli:
echo
clean: regressclean
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
- rm -f *.out core
+ rm -f *.out core survey
(cd openbsd-compat && $(MAKE) clean)
distclean: regressclean
rm -f *.o *.a $(TARGETS) logintest config.cache config.log
- rm -f *.out core
- rm -f Makefile config.h config.status ssh_prng_cmds *~
+ rm -f *.out core opensshd.init openssh.xml
+ rm -f Makefile buildpkg.sh config.h config.status ssh_prng_cmds
+ rm -f survey.sh openbsd-compat/regress/Makefile *~
rm -rf autom4te.cache
(cd openbsd-compat && $(MAKE) distclean)
(cd scard && $(MAKE) distclean)
+ if test -d pkg ; then \
+ rm -fr pkg ; \
+ fi
veryclean: distclean
rm -f configure config.h.in *.0
echo -n "cat.." ; \
nroff -mandoc ./mdoc/$$f | cat -v | sed -e 's/.\^H//g' > ./cat/$$f ; \
echo -n "man.." ; \
- cat ./mdoc/$$f | $(AWK) -f ./mdoc2man.awk > ./man/$$f ; \
+ cat ./mdoc/$$f | $(DISTAWK) -f ./mdoc2man.awk > ./man/$$f ; \
echo "done." ; \
done
distprep: catman-do
$(AUTORECONF)
-rm -rf autom4te.cache
- (cd scard && $(MAKE) -f Makefile.in distprep)
+# (cd scard && $(MAKE) -f Makefile.in distprep)
-install: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files host-key check-config
-install-nokeys: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files
+install: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config
+install-nokeys: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf
+install-nosysconf: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files
gpt-install: gpt-all gpt-install-files
gpt-install-nokeys: gpt-all gpt-install-files
$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
+ $(INSTALL) -m 644 moduli.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5
$(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
$(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
ln -s ./ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
ln -s ./ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
+
+install-sysconf:
if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
fi
else \
echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
fi
- @if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
+ @if [ -f ssh_prng_cmds ] && [ ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
else \
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$${docdir}5/ssh.d; \
$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$${docdir}8/ssh.d
$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
- $(INSTALL) -m 0755 ssh $(DESTDIR)$(bindir)/ssh
- $(INSTALL) -m 0755 scp $(DESTDIR)$(bindir)/scp
- $(INSTALL) -m 0755 ssh-add $(DESTDIR)$(bindir)/ssh-add
- $(INSTALL) -m 0755 ssh-agent $(DESTDIR)$(bindir)/ssh-agent
- $(INSTALL) -m 0755 ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
- $(INSTALL) -m 0755 ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
- $(INSTALL) -m 0755 sshd $(DESTDIR)$(sbindir)/sshd
- $(INSTALL) -m 0755 ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper
- $(INSTALL) -m 4711 ssh-keysign $(DESTDIR)$(SSH_KEYSIGN)
- $(INSTALL) -m 0755 sftp $(DESTDIR)$(bindir)/sftp
- $(INSTALL) -m 0755 sftp-server $(DESTDIR)$(SFTP_SERVER)
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh $(DESTDIR)$(bindir)/ssh
+ $(INSTALL) -m 0755 $(STRIP_OPT) scp $(DESTDIR)$(bindir)/scp
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh-add $(DESTDIR)$(bindir)/ssh-add
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent $(DESTDIR)$(bindir)/ssh-agent
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
+ $(INSTALL) -m 0755 $(STRIP_OPT) sshd $(DESTDIR)$(sbindir)/sshd
+ $(INSTALL) -m 0755 $(STRIP_OPT) ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper
+ $(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign $(DESTDIR)$(SSH_KEYSIGN)
+ $(INSTALL) -m 0755 $(STRIP_OPT) sftp $(DESTDIR)$(bindir)/sftp
+ $(INSTALL) -m 0755 $(STRIP_OPT) sftp-server $(DESTDIR)$(SFTP_SERVER)
-rm -f $(DESTDIR)$(bindir)/slogin
ln -s ./ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
-rm -f $(DESTDIR)$(globusbindir)/gsissh
rm -f $(DESTDIR)$(mandir)/$${docdir}1/gsiscp.1; \
ln -s ./ssh.d/scp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsiscp.1; \
rm -f $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1; \
- ln -s ./ssh.d/sftp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1;
+ ln -s ./ssh.d/sftp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1; \
+ rm -f $(DESTDIR)$(mandir)/$${docdir}5/sshd_config.5; \
+ ln -s ./ssh.d/sshd_config.5 $(DESTDIR)$(mandir)/$${docdir}5/sshd_config.5; \
+ rm -f $(DESTDIR)$(mandir)/$${docdir}5/ssh_config.5; \
+ ln -s ./ssh.d/ssh_config.5 $(DESTDIR)$(mandir)/$${docdir}5/ssh_config.5;
# end man
# start cat
docdir=cat; \
rm -f $(DESTDIR)$(mandir)/$${docdir}1/gsiscp.1; \
ln -s ./ssh.d/scp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsiscp.1; \
rm -f $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1; \
- ln -s ./ssh.d/sftp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1;
+ ln -s ./ssh.d/sftp.1 $(DESTDIR)$(mandir)/$${docdir}1/gsisftp.1; \
+ rm -f $(DESTDIR)$(mandir)/$${docdir}5/sshd_config.5; \
+ ln -s ./ssh.d/sshd_config.5 $(DESTDIR)$(mandir)/$${docdir}5/sshd_config.5; \
+ rm -f $(DESTDIR)$(mandir)/$${docdir}5/ssh_config.5; \
+ ln -s ./ssh.d/ssh_config.5 $(DESTDIR)$(mandir)/$${docdir}5/ssh_config.5;
# end cat
gpt-install-docs:
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
+ -rm -f $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
+ -rm -f $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
-tests: $(TARGETS)
+tests interop-tests: $(TARGETS)
BUILDDIR=`pwd`; \
[ -d `pwd`/regress ] || mkdir -p `pwd`/regress; \
[ -f `pwd`/regress/Makefile ] || \
- ln -s $(srcdir)/regress/Makefile `pwd`/regress/Makefile ; \
- TEST_SHELL="@TEST_MINUS_S_SH@"; \
+ ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile ; \
+ TEST_SHELL="@TEST_SHELL@"; \
TEST_SSH_SSH="$${BUILDDIR}/ssh"; \
TEST_SSH_SSHD="$${BUILDDIR}/sshd"; \
TEST_SSH_SSHAGENT="$${BUILDDIR}/ssh-agent"; \
TEST_SSH_SSHKEYSCAN="$${BUILDDIR}/ssh-keyscan"; \
TEST_SSH_SFTP="$${BUILDDIR}/sftp"; \
TEST_SSH_SFTPSERVER="$${BUILDDIR}/sftp-server"; \
+ TEST_SSH_PLINK="plink"; \
+ TEST_SSH_PUTTYGEN="puttygen"; \
+ TEST_SSH_CONCH="conch"; \
+ TEST_SSH_IPV6="@TEST_SSH_IPV6@" ; \
cd $(srcdir)/regress || exit $$?; \
$(MAKE) \
.OBJDIR="$${BUILDDIR}/regress" \
TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \
TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \
TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \
+ TEST_SSH_PLINK="$${TEST_SSH_PLINK}" \
+ TEST_SSH_PUTTYGEN="$${TEST_SSH_PUTTYGEN}" \
+ TEST_SSH_CONCH="$${TEST_SSH_CONCH}" \
+ TEST_SSH_IPV6="@TEST_SSH_IPV6@" \
EXEEXT="$(EXEEXT)" \
- $@
+ $@ && echo all tests passed
+
+compat-tests: $(LIBCOMPAT)
+ (cd openbsd-compat/regress && $(MAKE))
regressclean:
- if [ -f regress/Makefile -a -r regress/Makefile ]; then \
+ if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \
(cd regress && $(MAKE) clean) \
fi
+
+survey: survey.sh ssh
+ @$(SHELL) ./survey.sh > survey
+ @echo 'The survey results have been placed in the file "survey" in the'
+ @echo 'current directory. Please review the file then send with'
+ @echo '"make send-survey".'
+
+send-survey: survey
+ mail portable-survey@mindrot.org <survey
+
+package: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS)
+ if [ "@MAKE_PACKAGE_SUPPORTED@" = yes ]; then \
+ sh buildpkg.sh; \
+ fi
+
andersk / gssapi-openssh.git / blobdiff