[gssapi-openssh.git] / openssh / servconf.h

/*	$OpenBSD: servconf.h,v 1.72 2005/12/06 22:38:27 reyk Exp $	*/

/*
 * Author: Tatu Ylonen <ylo@cs.hut.fi>
 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
 *                    All rights reserved
 * Definitions for server configuration data and for the functions reading it.
 *
 * As far as I am concerned, the code I have written for this software
 * can be used freely for any purpose.  Any derived versions of this
 * software must be clearly marked as such, and if the derived work is
 * incompatible with the protocol description in the RFC file, it must be
 * called by a name other than "ssh" or "Secure Shell".
 */

#ifndef SERVCONF_H
#define SERVCONF_H

#include "buffer.h"

#define MAX_PORTS		256	/* Max # ports. */

#define MAX_ALLOW_USERS		256	/* Max # users on allow list. */
#define MAX_DENY_USERS		256	/* Max # users on deny list. */
#define MAX_ALLOW_GROUPS	256	/* Max # groups on allow list. */
#define MAX_DENY_GROUPS		256	/* Max # groups on deny list. */
#define MAX_SUBSYSTEMS		256	/* Max # subsystems. */
#define MAX_HOSTKEYS		256	/* Max # hostkeys. */
#define MAX_ACCEPT_ENV		256	/* Max # of env vars. */

/* permit_root_login */
#define	PERMIT_NOT_SET		-1
#define	PERMIT_NO		0
#define	PERMIT_FORCED_ONLY	1
#define	PERMIT_NO_PASSWD	2
#define	PERMIT_YES		3

#define DEFAULT_AUTH_FAIL_MAX	6	/* Default for MaxAuthTries */

typedef struct {
	u_int num_ports;
	u_int ports_from_cmdline;
	u_short ports[MAX_PORTS];	/* Port number to listen on. */
	char   *listen_addr;		/* Address on which the server listens. */
	struct addrinfo *listen_addrs;	/* Addresses on which the server listens. */
	int     address_family;		/* Address family used by the server. */
	char   *host_key_files[MAX_HOSTKEYS];	/* Files containing host keys. */
	int     num_host_key_files;     /* Number of files for host keys. */
	char   *pid_file;	/* Where to put our pid */
	int     server_key_bits;/* Size of the server key. */
	int     login_grace_time;	/* Disconnect if no auth in this time
					 * (sec). */
	int     key_regeneration_time;	/* Server key lifetime (seconds). */
	int     permit_root_login;	/* PERMIT_*, see above */
	int     ignore_rhosts;	/* Ignore .rhosts and .shosts. */
	int     ignore_user_known_hosts;	/* Ignore ~/.ssh/known_hosts
						 * for RhostsRsaAuth */
	int     print_motd;	/* If true, print /etc/motd. */
	int	print_lastlog;	/* If true, print lastlog */
	int     x11_forwarding;	/* If true, permit inet (spoofing) X11 fwd. */
	int     x11_display_offset;	/* What DISPLAY number to start
					 * searching at */
	int     x11_use_localhost;	/* If true, use localhost for fake X11 server. */
	char   *xauth_location;	/* Location of xauth program */
	int     strict_modes;	/* If true, require string home dir modes. */
	int     tcp_keep_alive;	/* If true, set SO_KEEPALIVE. */
	char   *ciphers;	/* Supported SSH2 ciphers. */
	char   *macs;		/* Supported SSH2 macs. */
	int	protocol;	/* Supported protocol versions. */
	int     gateway_ports;	/* If true, allow remote connects to forwarded ports. */
	SyslogFacility log_facility;	/* Facility for system logging. */
	LogLevel log_level;	/* Level for system logging. */
	int     rhosts_rsa_authentication;	/* If true, permit rhosts RSA
						 * authentication. */
	int     hostbased_authentication;	/* If true, permit ssh2 hostbased auth */
	int     hostbased_uses_name_from_packet_only; /* experimental */
	int     rsa_authentication;	/* If true, permit RSA authentication. */
	int     pubkey_authentication;	/* If true, permit ssh2 pubkey authentication. */
	int     kerberos_authentication;	/* If true, permit Kerberos
						 * authentication. */
	int     kerberos_or_local_passwd;	/* If true, permit kerberos
						 * and any other password
						 * authentication mechanism,
						 * such as SecurID or
						 * /etc/passwd */
	int     kerberos_ticket_cleanup;	/* If true, destroy ticket
						 * file on logout. */
#ifdef SESSION_HOOKS
        int     session_hooks_allow;        /* If true, permit user hooks */
        char*   session_hooks_startup_cmd;  /* cmd to be executed before */
        char*   session_hooks_shutdown_cmd; /* cmd to be executed after */
#endif
	int     kerberos_get_afs_token;		/* If true, try to get AFS token if
						 * authenticated with Kerberos. */
	int     gss_authentication;	/* If true, permit GSSAPI authentication */
	int 	gss_keyex;		/* If true, permit GSSAPI key exchange */
	int     gss_cleanup_creds;	/* If true, destroy cred cache on logout */
	int     gsi_allow_limited_proxy;	/* If true, accept limited proxies */
	int     password_authentication;	/* If true, permit password
						 * authentication. */
	int     kbd_interactive_authentication;	/* If true, permit */
	int     challenge_response_authentication;
	int     permit_empty_passwd;	/* If false, do not permit empty
					 * passwords. */
	int     permit_user_env;	/* If true, read ~/.ssh/environment */
	int     use_login;	/* If true, login(1) is used */
	int     compression;	/* If true, compression is allowed */
	int	allow_tcp_forwarding;
	u_int num_allow_users;
	char   *allow_users[MAX_ALLOW_USERS];
	u_int num_deny_users;
	char   *deny_users[MAX_DENY_USERS];
	u_int num_allow_groups;
	char   *allow_groups[MAX_ALLOW_GROUPS];
	u_int num_deny_groups;
	char   *deny_groups[MAX_DENY_GROUPS];

	u_int num_subsystems;
	char   *subsystem_name[MAX_SUBSYSTEMS];
	char   *subsystem_command[MAX_SUBSYSTEMS];

	u_int num_accept_env;
	char   *accept_env[MAX_ACCEPT_ENV];

	int	max_startups_begin;
	int	max_startups_rate;
	int	max_startups;
	int	max_authtries;
	char   *banner;			/* SSH-2 banner message */
	int	use_dns;
	int	client_alive_interval;	/*
					 * poke the client this often to
					 * see if it's still there
					 */
	int	client_alive_count_max;	/*
					 * If the client is unresponsive
					 * for this many intervals above,
					 * disconnect the session
					 */

	char   *authorized_keys_file;	/* File containing public keys */
	char   *authorized_keys_file2;

	int	use_pam;		/* Enable auth via PAM */

	int	permit_tun;
}       ServerOptions;

void	 initialize_server_options(ServerOptions *);
void	 fill_default_server_options(ServerOptions *);
int	 process_server_config_line(ServerOptions *, char *, const char *, int);
void	 load_server_config(const char *, Buffer *);
void	 parse_server_config(ServerOptions *, const char *, Buffer *);

#endif				/* SERVCONF_H */
Commit	Line	Data
08822d99	1	/* $OpenBSD: servconf.h,v 1.72 2005/12/06 22:38:27 reyk Exp $ */
e9702f7d	2
3c0ef626	3	/*
	4	* Author: Tatu Ylonen <ylo@cs.hut.fi>
	5	* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
	6	* All rights reserved
	7	* Definitions for server configuration data and for the functions reading it.
	8	*
	9	* As far as I am concerned, the code I have written for this software
	10	* can be used freely for any purpose. Any derived versions of this
	11	* software must be clearly marked as such, and if the derived work is
	12	* incompatible with the protocol description in the RFC file, it must be
	13	* called by a name other than "ssh" or "Secure Shell".
	14	*/
	15
3c0ef626	16	#ifndef SERVCONF_H
	17	#define SERVCONF_H
	18
7e82606e	19	#include "buffer.h"
7e82606e	20
3c0ef626	21	#define MAX_PORTS 256 /* Max # ports. */
	22
	23	#define MAX_ALLOW_USERS 256 /* Max # users on allow list. */
	24	#define MAX_DENY_USERS 256 /* Max # users on deny list. */
	25	#define MAX_ALLOW_GROUPS 256 /* Max # groups on allow list. */
	26	#define MAX_DENY_GROUPS 256 /* Max # groups on deny list. */
	27	#define MAX_SUBSYSTEMS 256 /* Max # subsystems. */
	28	#define MAX_HOSTKEYS 256 /* Max # hostkeys. */
7e82606e	29	#define MAX_ACCEPT_ENV 256 /* Max # of env vars. */
3c0ef626	30
	31	/* permit_root_login */
	32	#define PERMIT_NOT_SET -1
	33	#define PERMIT_NO 0
	34	#define PERMIT_FORCED_ONLY 1
	35	#define PERMIT_NO_PASSWD 2
	36	#define PERMIT_YES 3
	37
7e82606e	38	#define DEFAULT_AUTH_FAIL_MAX 6 /* Default for MaxAuthTries */
3c0ef626	39
	40	typedef struct {
	41	u_int num_ports;
	42	u_int ports_from_cmdline;
	43	u_short ports[MAX_PORTS]; /* Port number to listen on. */
	44	char listen_addr; / Address on which the server listens. */
	45	struct addrinfo listen_addrs; / Addresses on which the server listens. */
dfddba3d	46	int address_family; /* Address family used by the server. */
3c0ef626	47	char host_key_files[MAX_HOSTKEYS]; / Files containing host keys. */
	48	int num_host_key_files; /* Number of files for host keys. */
	49	char pid_file; / Where to put our pid */
	50	int server_key_bits;/* Size of the server key. */
	51	int login_grace_time; /* Disconnect if no auth in this time
	52	* (sec). */
	53	int key_regeneration_time; /* Server key lifetime (seconds). */
	54	int permit_root_login; /* PERMIT_, see above /
	55	int ignore_rhosts; /* Ignore .rhosts and .shosts. */
	56	int ignore_user_known_hosts; /* Ignore ~/.ssh/known_hosts
	57	* for RhostsRsaAuth */
	58	int print_motd; /* If true, print /etc/motd. */
	59	int print_lastlog; /* If true, print lastlog */
	60	int x11_forwarding; /* If true, permit inet (spoofing) X11 fwd. */
	61	int x11_display_offset; /* What DISPLAY number to start
	62	* searching at */
e9702f7d	63	int x11_use_localhost; /* If true, use localhost for fake X11 server. */
3c0ef626	64	char xauth_location; / Location of xauth program */
3c0ef626	65	int strict_modes; /* If true, require string home dir modes. */
540d72c3	66	int tcp_keep_alive; /* If true, set SO_KEEPALIVE. */
3c0ef626	67	char ciphers; / Supported SSH2 ciphers. */
	68	char macs; / Supported SSH2 macs. */
	69	int protocol; /* Supported protocol versions. */
	70	int gateway_ports; /* If true, allow remote connects to forwarded ports. */
	71	SyslogFacility log_facility; /* Facility for system logging. */
	72	LogLevel log_level; /* Level for system logging. */
3c0ef626	73	int rhosts_rsa_authentication; /* If true, permit rhosts RSA
	74	* authentication. */
	75	int hostbased_authentication; /* If true, permit ssh2 hostbased auth */
	76	int hostbased_uses_name_from_packet_only; /* experimental */
	77	int rsa_authentication; /* If true, permit RSA authentication. */
	78	int pubkey_authentication; /* If true, permit ssh2 pubkey authentication. */
3c0ef626	79	int kerberos_authentication; /* If true, permit Kerberos
	80	* authentication. */
	81	int kerberos_or_local_passwd; /* If true, permit kerberos
	82	* and any other password
	83	* authentication mechanism,
	84	* such as SecurID or
	85	* /etc/passwd */
	86	int kerberos_ticket_cleanup; /* If true, destroy ticket
	87	* file on logout. */
75be3237	88	#ifdef SESSION_HOOKS
	89	int session_hooks_allow; /* If true, permit user hooks */
	90	char* session_hooks_startup_cmd; /* cmd to be executed before */
	91	char* session_hooks_shutdown_cmd; /* cmd to be executed after */
3c0ef626	92	#endif
540d72c3	93	int kerberos_get_afs_token; /* If true, try to get AFS token if
540d72c3	94	* authenticated with Kerberos. */
7cac2b65	95	int gss_authentication; /* If true, permit GSSAPI authentication */
fe4ad273	96	int gss_keyex; /* If true, permit GSSAPI key exchange */
7cac2b65	97	int gss_cleanup_creds; /* If true, destroy cred cache on logout */
826a9049	98	int gsi_allow_limited_proxy; /* If true, accept limited proxies */
3c0ef626	99	int password_authentication; /* If true, permit password
	100	* authentication. */
	101	int kbd_interactive_authentication; /* If true, permit */
	102	int challenge_response_authentication;
	103	int permit_empty_passwd; /* If false, do not permit empty
	104	* passwords. */
d03f4262	105	int permit_user_env; /* If true, read ~/.ssh/environment */
3c0ef626	106	int use_login; /* If true, login(1) is used */
44a053a3	107	int compression; /* If true, compression is allowed */
3c0ef626	108	int allow_tcp_forwarding;
	109	u_int num_allow_users;
	110	char *allow_users[MAX_ALLOW_USERS];
	111	u_int num_deny_users;
	112	char *deny_users[MAX_DENY_USERS];
	113	u_int num_allow_groups;
	114	char *allow_groups[MAX_ALLOW_GROUPS];
	115	u_int num_deny_groups;
	116	char *deny_groups[MAX_DENY_GROUPS];
	117
	118	u_int num_subsystems;
	119	char *subsystem_name[MAX_SUBSYSTEMS];
	120	char *subsystem_command[MAX_SUBSYSTEMS];
	121
7e82606e	122	u_int num_accept_env;
	123	char *accept_env[MAX_ACCEPT_ENV];
	124
3c0ef626	125	int max_startups_begin;
	126	int max_startups_rate;
	127	int max_startups;
7e82606e	128	int max_authtries;
3c0ef626	129	char banner; / SSH-2 banner message */
7cac2b65	130	int use_dns;
3c0ef626	131	int client_alive_interval; /*
e9702f7d	132	* poke the client this often to
e9702f7d	133	* see if it's still there
3c0ef626	134	*/
	135	int client_alive_count_max; /*
	136	* If the client is unresponsive
	137	* for this many intervals above,
e9702f7d	138	* disconnect the session
3c0ef626	139	*/
	140
	141	char authorized_keys_file; / File containing public keys */
	142	char *authorized_keys_file2;
08822d99	143
7cac2b65	144	int use_pam; /* Enable auth via PAM */
08822d99	145
08822d99	146	int permit_tun;
3c0ef626	147	} ServerOptions;
	148
	149	void initialize_server_options(ServerOptions *);
3c0ef626	150	void fill_default_server_options(ServerOptions *);
e9702f7d	151	int process_server_config_line(ServerOptions , char , const char *, int);
7e82606e	152	void load_server_config(const char , Buffer );
7e82606e	153	void parse_server_config(ServerOptions , const char , Buffer *);
3c0ef626	154
3c0ef626	155	#endif /* SERVCONF_H */