]> andersk Git - gssapi-openssh.git/blame - openssh/packet.c
Initial revision
[gssapi-openssh.git] / openssh / packet.c
CommitLineData
3c0ef626 1/*
2 * Author: Tatu Ylonen <ylo@cs.hut.fi>
3 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
4 * All rights reserved
5 * This file contains code implementing the packet protocol and communication
6 * with the other side. This same code is used both on client and server side.
7 *
8 * As far as I am concerned, the code I have written for this software
9 * can be used freely for any purpose. Any derived versions of this
10 * software must be clearly marked as such, and if the derived work is
11 * incompatible with the protocol description in the RFC file, it must be
12 * called by a name other than "ssh" or "Secure Shell".
13 *
14 *
15 * SSH2 packet format added by Markus Friedl.
16 * Copyright (c) 2000, 2001 Markus Friedl. All rights reserved.
17 *
18 * Redistribution and use in source and binary forms, with or without
19 * modification, are permitted provided that the following conditions
20 * are met:
21 * 1. Redistributions of source code must retain the above copyright
22 * notice, this list of conditions and the following disclaimer.
23 * 2. Redistributions in binary form must reproduce the above copyright
24 * notice, this list of conditions and the following disclaimer in the
25 * documentation and/or other materials provided with the distribution.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
29 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
30 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
31 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
32 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
36 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 */
38
39#include "includes.h"
2ce0bfe4 40RCSID("$OpenBSD: packet.c,v 1.119 2005/07/28 17:36:22 markus Exp $");
7cac2b65 41
42#include "openbsd-compat/sys-queue.h"
3c0ef626 43
44#include "xmalloc.h"
45#include "buffer.h"
46#include "packet.h"
47#include "bufaux.h"
48#include "crc32.h"
49#include "getput.h"
50
51#include "compress.h"
52#include "deattack.h"
53#include "channels.h"
54
55#include "compat.h"
56#include "ssh1.h"
57#include "ssh2.h"
58
59#include "cipher.h"
60#include "kex.h"
61#include "mac.h"
62#include "log.h"
63#include "canohost.h"
1e608e42 64#include "misc.h"
44a053a3 65#include "ssh.h"
3c0ef626 66
67#ifdef PACKET_DEBUG
68#define DBG(x) x
69#else
70#define DBG(x)
71#endif
72
73/*
74 * This variable contains the file descriptors used for communicating with
75 * the other side. connection_in is used for reading; connection_out for
76 * writing. These can be the same descriptor, in which case it is assumed to
77 * be a socket.
78 */
79static int connection_in = -1;
80static int connection_out = -1;
81
82/* Protocol flags for the remote side. */
83static u_int remote_protocol_flags = 0;
84
85/* Encryption context for receiving data. This is only used for decryption. */
86static CipherContext receive_context;
87
88/* Encryption context for sending data. This is only used for encryption. */
89static CipherContext send_context;
90
91/* Buffer for raw input data from the socket. */
510132b6 92Buffer input;
3c0ef626 93
94/* Buffer for raw output data going to the socket. */
510132b6 95Buffer output;
3c0ef626 96
97/* Buffer for the partial outgoing packet being constructed. */
98static Buffer outgoing_packet;
99
100/* Buffer for the incoming packet currently being processed. */
101static Buffer incoming_packet;
102
103/* Scratch buffer for packet compression/decompression. */
104static Buffer compression_buffer;
105static int compression_buffer_ready = 0;
106
107/* Flag indicating whether packet compression/decompression is enabled. */
108static int packet_compression = 0;
109
110/* default maximum packet size */
7cac2b65 111u_int max_packet_size = 32768;
3c0ef626 112
113/* Flag indicating whether this module has been initialized. */
114static int initialized = 0;
115
116/* Set to true if the connection is interactive. */
117static int interactive_mode = 0;
118
2ce0bfe4 119/* Set to true if we are the server side. */
120static int server_side = 0;
121
122/* Set to true if we are authenticated. */
123static int after_authentication = 0;
124
3c0ef626 125/* Session key information for Encryption and MAC */
126Newkeys *newkeys[MODE_MAX];
7cac2b65 127static struct packet_state {
128 u_int32_t seqnr;
129 u_int32_t packets;
130 u_int64_t blocks;
131} p_read, p_send;
132
133static u_int64_t max_blocks_in, max_blocks_out;
134static u_int32_t rekey_limit;
3c0ef626 135
44a053a3 136/* Session key for protocol v1 */
137static u_char ssh1_key[SSH_SESSION_KEY_LENGTH];
138static u_int ssh1_keylen;
139
3c0ef626 140/* roundup current message to extra_pad bytes */
141static u_char extra_pad = 0;
142
7cac2b65 143struct packet {
144 TAILQ_ENTRY(packet) next;
145 u_char type;
146 Buffer payload;
147};
148TAILQ_HEAD(, packet) outgoing;
149
3c0ef626 150/*
151 * Sets the descriptors used for communication. Disables encryption until
152 * packet_set_encryption_key is called.
153 */
154void
155packet_set_connection(int fd_in, int fd_out)
156{
157 Cipher *none = cipher_by_name("none");
d03f4262 158
3c0ef626 159 if (none == NULL)
160 fatal("packet_set_connection: cannot load cipher 'none'");
161 connection_in = fd_in;
162 connection_out = fd_out;
7e82606e 163 cipher_init(&send_context, none, (const u_char *)"",
164 0, NULL, 0, CIPHER_ENCRYPT);
165 cipher_init(&receive_context, none, (const u_char *)"",
166 0, NULL, 0, CIPHER_DECRYPT);
3c0ef626 167 newkeys[MODE_IN] = newkeys[MODE_OUT] = NULL;
168 if (!initialized) {
169 initialized = 1;
170 buffer_init(&input);
171 buffer_init(&output);
172 buffer_init(&outgoing_packet);
173 buffer_init(&incoming_packet);
7cac2b65 174 TAILQ_INIT(&outgoing);
3c0ef626 175 }
3c0ef626 176}
177
178/* Returns 1 if remote host is connected via socket, 0 if not. */
179
180int
1e608e42 181packet_connection_is_on_socket(void)
3c0ef626 182{
183 struct sockaddr_storage from, to;
184 socklen_t fromlen, tolen;
185
186 /* filedescriptors in and out are the same, so it's a socket */
187 if (connection_in == connection_out)
188 return 1;
189 fromlen = sizeof(from);
190 memset(&from, 0, sizeof(from));
191 if (getpeername(connection_in, (struct sockaddr *)&from, &fromlen) < 0)
192 return 0;
193 tolen = sizeof(to);
194 memset(&to, 0, sizeof(to));
195 if (getpeername(connection_out, (struct sockaddr *)&to, &tolen) < 0)
196 return 0;
197 if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0)
198 return 0;
199 if (from.ss_family != AF_INET && from.ss_family != AF_INET6)
200 return 0;
201 return 1;
202}
203
510132b6 204/*
205 * Exports an IV from the CipherContext required to export the key
206 * state back from the unprivileged child to the privileged parent
207 * process.
208 */
209
210void
211packet_get_keyiv(int mode, u_char *iv, u_int len)
212{
213 CipherContext *cc;
214
215 if (mode == MODE_OUT)
216 cc = &send_context;
217 else
218 cc = &receive_context;
219
220 cipher_get_keyiv(cc, iv, len);
221}
222
223int
224packet_get_keycontext(int mode, u_char *dat)
225{
226 CipherContext *cc;
227
228 if (mode == MODE_OUT)
229 cc = &send_context;
230 else
231 cc = &receive_context;
232
233 return (cipher_get_keycontext(cc, dat));
234}
235
236void
237packet_set_keycontext(int mode, u_char *dat)
238{
239 CipherContext *cc;
240
241 if (mode == MODE_OUT)
242 cc = &send_context;
243 else
244 cc = &receive_context;
245
246 cipher_set_keycontext(cc, dat);
247}
248
249int
250packet_get_keyiv_len(int mode)
251{
252 CipherContext *cc;
253
254 if (mode == MODE_OUT)
255 cc = &send_context;
256 else
257 cc = &receive_context;
258
259 return (cipher_get_keyiv_len(cc));
260}
261void
262packet_set_iv(int mode, u_char *dat)
263{
264 CipherContext *cc;
265
266 if (mode == MODE_OUT)
267 cc = &send_context;
268 else
269 cc = &receive_context;
270
271 cipher_set_keyiv(cc, dat);
272}
273int
7cac2b65 274packet_get_ssh1_cipher(void)
510132b6 275{
276 return (cipher_get_number(receive_context.cipher));
277}
278
7cac2b65 279void
280packet_get_state(int mode, u_int32_t *seqnr, u_int64_t *blocks, u_int32_t *packets)
510132b6 281{
7cac2b65 282 struct packet_state *state;
283
284 state = (mode == MODE_IN) ? &p_read : &p_send;
285 *seqnr = state->seqnr;
286 *blocks = state->blocks;
287 *packets = state->packets;
510132b6 288}
289
290void
7cac2b65 291packet_set_state(int mode, u_int32_t seqnr, u_int64_t blocks, u_int32_t packets)
510132b6 292{
7cac2b65 293 struct packet_state *state;
294
295 state = (mode == MODE_IN) ? &p_read : &p_send;
296 state->seqnr = seqnr;
297 state->blocks = blocks;
298 state->packets = packets;
510132b6 299}
300
3c0ef626 301/* returns 1 if connection is via ipv4 */
302
303int
1e608e42 304packet_connection_is_ipv4(void)
3c0ef626 305{
306 struct sockaddr_storage to;
307 socklen_t tolen = sizeof(to);
308
309 memset(&to, 0, sizeof(to));
310 if (getsockname(connection_out, (struct sockaddr *)&to, &tolen) < 0)
311 return 0;
510132b6 312 if (to.ss_family == AF_INET)
313 return 1;
314#ifdef IPV4_IN_IPV6
540d72c3 315 if (to.ss_family == AF_INET6 &&
510132b6 316 IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr))
317 return 1;
318#endif
319 return 0;
3c0ef626 320}
321
322/* Sets the connection into non-blocking mode. */
323
324void
1e608e42 325packet_set_nonblocking(void)
3c0ef626 326{
327 /* Set the socket into non-blocking mode. */
7e82606e 328 set_nonblock(connection_in);
3c0ef626 329
7e82606e 330 if (connection_out != connection_in)
331 set_nonblock(connection_out);
3c0ef626 332}
333
334/* Returns the socket used for reading. */
335
336int
1e608e42 337packet_get_connection_in(void)
3c0ef626 338{
339 return connection_in;
340}
341
342/* Returns the descriptor used for writing. */
343
344int
1e608e42 345packet_get_connection_out(void)
3c0ef626 346{
347 return connection_out;
348}
349
350/* Closes the connection and clears and frees internal data structures. */
351
352void
1e608e42 353packet_close(void)
3c0ef626 354{
355 if (!initialized)
356 return;
357 initialized = 0;
358 if (connection_in == connection_out) {
359 shutdown(connection_out, SHUT_RDWR);
360 close(connection_out);
361 } else {
362 close(connection_in);
363 close(connection_out);
364 }
365 buffer_free(&input);
366 buffer_free(&output);
367 buffer_free(&outgoing_packet);
368 buffer_free(&incoming_packet);
369 if (compression_buffer_ready) {
370 buffer_free(&compression_buffer);
371 buffer_compress_uninit();
372 }
1e608e42 373 cipher_cleanup(&send_context);
374 cipher_cleanup(&receive_context);
3c0ef626 375}
376
377/* Sets remote side protocol flags. */
378
379void
380packet_set_protocol_flags(u_int protocol_flags)
381{
382 remote_protocol_flags = protocol_flags;
383}
384
385/* Returns the remote protocol flags set earlier by the above function. */
386
387u_int
1e608e42 388packet_get_protocol_flags(void)
3c0ef626 389{
390 return remote_protocol_flags;
391}
392
393/*
394 * Starts packet compression from the next packet on in both directions.
395 * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
396 */
397
398static void
399packet_init_compression(void)
400{
401 if (compression_buffer_ready == 1)
402 return;
403 compression_buffer_ready = 1;
404 buffer_init(&compression_buffer);
405}
406
407void
408packet_start_compression(int level)
409{
410 if (packet_compression && !compat20)
411 fatal("Compression already enabled.");
412 packet_compression = 1;
413 packet_init_compression();
414 buffer_compress_init_send(level);
415 buffer_compress_init_recv();
416}
417
418/*
419 * Causes any further packets to be encrypted using the given key. The same
420 * key is used for both sending and reception. However, both directions are
421 * encrypted independently of each other.
422 */
44a053a3 423
3c0ef626 424void
425packet_set_encryption_key(const u_char *key, u_int keylen,
426 int number)
427{
428 Cipher *cipher = cipher_by_number(number);
d03f4262 429
3c0ef626 430 if (cipher == NULL)
431 fatal("packet_set_encryption_key: unknown cipher number %d", number);
432 if (keylen < 20)
433 fatal("packet_set_encryption_key: keylen too small: %d", keylen);
44a053a3 434 if (keylen > SSH_SESSION_KEY_LENGTH)
435 fatal("packet_set_encryption_key: keylen too big: %d", keylen);
436 memcpy(ssh1_key, key, keylen);
437 ssh1_keylen = keylen;
1e608e42 438 cipher_init(&send_context, cipher, key, keylen, NULL, 0, CIPHER_ENCRYPT);
439 cipher_init(&receive_context, cipher, key, keylen, NULL, 0, CIPHER_DECRYPT);
3c0ef626 440}
441
44a053a3 442u_int
443packet_get_encryption_key(u_char *key)
444{
445 if (key == NULL)
446 return (ssh1_keylen);
447 memcpy(key, ssh1_key, ssh1_keylen);
448 return (ssh1_keylen);
449}
450
3c0ef626 451/* Start constructing a packet to send. */
452void
453packet_start(u_char type)
454{
455 u_char buf[9];
456 int len;
457
458 DBG(debug("packet_start[%d]", type));
459 len = compat20 ? 6 : 9;
460 memset(buf, 0, len - 1);
461 buf[len - 1] = type;
462 buffer_clear(&outgoing_packet);
463 buffer_append(&outgoing_packet, buf, len);
464}
465
466/* Append payload. */
467void
468packet_put_char(int value)
469{
470 char ch = value;
d03f4262 471
3c0ef626 472 buffer_append(&outgoing_packet, &ch, 1);
473}
474void
475packet_put_int(u_int value)
476{
477 buffer_put_int(&outgoing_packet, value);
478}
479void
1e608e42 480packet_put_string(const void *buf, u_int len)
3c0ef626 481{
482 buffer_put_string(&outgoing_packet, buf, len);
483}
484void
485packet_put_cstring(const char *str)
486{
487 buffer_put_cstring(&outgoing_packet, str);
488}
489void
1e608e42 490packet_put_raw(const void *buf, u_int len)
3c0ef626 491{
492 buffer_append(&outgoing_packet, buf, len);
493}
494void
495packet_put_bignum(BIGNUM * value)
496{
497 buffer_put_bignum(&outgoing_packet, value);
498}
499void
500packet_put_bignum2(BIGNUM * value)
501{
502 buffer_put_bignum2(&outgoing_packet, value);
503}
504
505/*
506 * Finalizes and sends the packet. If the encryption key has been set,
507 * encrypts the packet before sending.
508 */
509
510static void
511packet_send1(void)
512{
1e608e42 513 u_char buf[8], *cp;
3c0ef626 514 int i, padding, len;
515 u_int checksum;
7e82606e 516 u_int32_t rnd = 0;
3c0ef626 517
518 /*
519 * If using packet compression, compress the payload of the outgoing
520 * packet.
521 */
522 if (packet_compression) {
523 buffer_clear(&compression_buffer);
524 /* Skip padding. */
525 buffer_consume(&outgoing_packet, 8);
526 /* padding */
527 buffer_append(&compression_buffer, "\0\0\0\0\0\0\0\0", 8);
528 buffer_compress(&outgoing_packet, &compression_buffer);
529 buffer_clear(&outgoing_packet);
530 buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
1e608e42 531 buffer_len(&compression_buffer));
3c0ef626 532 }
533 /* Compute packet length without padding (add checksum, remove padding). */
534 len = buffer_len(&outgoing_packet) + 4 - 8;
535
536 /* Insert padding. Initialized to zero in packet_start1() */
537 padding = 8 - len % 8;
1e608e42 538 if (!send_context.plaintext) {
3c0ef626 539 cp = buffer_ptr(&outgoing_packet);
540 for (i = 0; i < padding; i++) {
541 if (i % 4 == 0)
7e82606e 542 rnd = arc4random();
543 cp[7 - i] = rnd & 0xff;
544 rnd >>= 8;
3c0ef626 545 }
546 }
547 buffer_consume(&outgoing_packet, 8 - padding);
548
549 /* Add check bytes. */
1e608e42 550 checksum = ssh_crc32(buffer_ptr(&outgoing_packet),
3c0ef626 551 buffer_len(&outgoing_packet));
552 PUT_32BIT(buf, checksum);
553 buffer_append(&outgoing_packet, buf, 4);
554
555#ifdef PACKET_DEBUG
556 fprintf(stderr, "packet_send plain: ");
557 buffer_dump(&outgoing_packet);
558#endif
559
560 /* Append to output. */
561 PUT_32BIT(buf, len);
562 buffer_append(&output, buf, 4);
1e608e42 563 cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
564 cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
565 buffer_len(&outgoing_packet));
3c0ef626 566
567#ifdef PACKET_DEBUG
568 fprintf(stderr, "encrypted: ");
569 buffer_dump(&output);
570#endif
571
572 buffer_clear(&outgoing_packet);
573
574 /*
575 * Note that the packet is now only buffered in output. It won\'t be
576 * actually sent until packet_write_wait or packet_write_poll is
577 * called.
578 */
579}
580
510132b6 581void
3c0ef626 582set_newkeys(int mode)
583{
584 Enc *enc;
585 Mac *mac;
586 Comp *comp;
587 CipherContext *cc;
7cac2b65 588 u_int64_t *max_blocks;
7e82606e 589 int crypt_type;
3c0ef626 590
bfe49944 591 debug2("set_newkeys: mode %d", mode);
3c0ef626 592
1e608e42 593 if (mode == MODE_OUT) {
594 cc = &send_context;
7e82606e 595 crypt_type = CIPHER_ENCRYPT;
7cac2b65 596 p_send.packets = p_send.blocks = 0;
597 max_blocks = &max_blocks_out;
1e608e42 598 } else {
599 cc = &receive_context;
7e82606e 600 crypt_type = CIPHER_DECRYPT;
7cac2b65 601 p_read.packets = p_read.blocks = 0;
602 max_blocks = &max_blocks_in;
1e608e42 603 }
3c0ef626 604 if (newkeys[mode] != NULL) {
bfe49944 605 debug("set_newkeys: rekeying");
1e608e42 606 cipher_cleanup(cc);
3c0ef626 607 enc = &newkeys[mode]->enc;
608 mac = &newkeys[mode]->mac;
609 comp = &newkeys[mode]->comp;
610 memset(mac->key, 0, mac->key_len);
611 xfree(enc->name);
612 xfree(enc->iv);
613 xfree(enc->key);
614 xfree(mac->name);
615 xfree(mac->key);
616 xfree(comp->name);
617 xfree(newkeys[mode]);
618 }
619 newkeys[mode] = kex_get_newkeys(mode);
620 if (newkeys[mode] == NULL)
621 fatal("newkeys: no keys for mode %d", mode);
622 enc = &newkeys[mode]->enc;
623 mac = &newkeys[mode]->mac;
624 comp = &newkeys[mode]->comp;
625 if (mac->md != NULL)
626 mac->enabled = 1;
627 DBG(debug("cipher_init_context: %d", mode));
1e608e42 628 cipher_init(cc, enc->cipher, enc->key, enc->key_len,
7e82606e 629 enc->iv, enc->block_size, crypt_type);
510132b6 630 /* Deleting the keys does not gain extra security */
631 /* memset(enc->iv, 0, enc->block_size);
632 memset(enc->key, 0, enc->key_len); */
2ce0bfe4 633 if ((comp->type == COMP_ZLIB ||
634 (comp->type == COMP_DELAYED && after_authentication)) &&
635 comp->enabled == 0) {
3c0ef626 636 packet_init_compression();
637 if (mode == MODE_OUT)
638 buffer_compress_init_send(6);
639 else
640 buffer_compress_init_recv();
641 comp->enabled = 1;
642 }
7cac2b65 643 /*
644 * The 2^(blocksize*2) limit is too expensive for 3DES,
645 * blowfish, etc, so enforce a 1GB limit for small blocksizes.
646 */
647 if (enc->block_size >= 16)
648 *max_blocks = (u_int64_t)1 << (enc->block_size*2);
649 else
650 *max_blocks = ((u_int64_t)1 << 30) / enc->block_size;
651 if (rekey_limit)
652 *max_blocks = MIN(*max_blocks, rekey_limit / enc->block_size);
3c0ef626 653}
654
2ce0bfe4 655/*
656 * Delayed compression for SSH2 is enabled after authentication:
657 * This happans on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent,
658 * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received.
659 */
660static void
661packet_enable_delayed_compress(void)
662{
663 Comp *comp = NULL;
664 int mode;
665
666 /*
667 * Remember that we are past the authentication step, so rekeying
668 * with COMP_DELAYED will turn on compression immediately.
669 */
670 after_authentication = 1;
671 for (mode = 0; mode < MODE_MAX; mode++) {
672 comp = &newkeys[mode]->comp;
673 if (comp && !comp->enabled && comp->type == COMP_DELAYED) {
674 packet_init_compression();
675 if (mode == MODE_OUT)
676 buffer_compress_init_send(6);
677 else
678 buffer_compress_init_recv();
679 comp->enabled = 1;
680 }
681 }
682}
683
3c0ef626 684/*
685 * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
686 */
687static void
7cac2b65 688packet_send2_wrapped(void)
3c0ef626 689{
1e608e42 690 u_char type, *cp, *macbuf = NULL;
3c0ef626 691 u_char padlen, pad;
3c0ef626 692 u_int packet_length = 0;
693 u_int i, len;
7e82606e 694 u_int32_t rnd = 0;
3c0ef626 695 Enc *enc = NULL;
696 Mac *mac = NULL;
697 Comp *comp = NULL;
698 int block_size;
699
700 if (newkeys[MODE_OUT] != NULL) {
701 enc = &newkeys[MODE_OUT]->enc;
702 mac = &newkeys[MODE_OUT]->mac;
703 comp = &newkeys[MODE_OUT]->comp;
704 }
1e608e42 705 block_size = enc ? enc->block_size : 8;
3c0ef626 706
1e608e42 707 cp = buffer_ptr(&outgoing_packet);
708 type = cp[5];
3c0ef626 709
710#ifdef PACKET_DEBUG
711 fprintf(stderr, "plain: ");
712 buffer_dump(&outgoing_packet);
713#endif
714
715 if (comp && comp->enabled) {
716 len = buffer_len(&outgoing_packet);
717 /* skip header, compress only payload */
718 buffer_consume(&outgoing_packet, 5);
719 buffer_clear(&compression_buffer);
720 buffer_compress(&outgoing_packet, &compression_buffer);
721 buffer_clear(&outgoing_packet);
722 buffer_append(&outgoing_packet, "\0\0\0\0\0", 5);
723 buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer),
724 buffer_len(&compression_buffer));
725 DBG(debug("compression: raw %d compressed %d", len,
726 buffer_len(&outgoing_packet)));
727 }
728
729 /* sizeof (packet_len + pad_len + payload) */
730 len = buffer_len(&outgoing_packet);
731
732 /*
733 * calc size of padding, alloc space, get random data,
734 * minimum padding is 4 bytes
735 */
736 padlen = block_size - (len % block_size);
737 if (padlen < 4)
738 padlen += block_size;
739 if (extra_pad) {
740 /* will wrap if extra_pad+padlen > 255 */
741 extra_pad = roundup(extra_pad, block_size);
742 pad = extra_pad - ((len + padlen) % extra_pad);
510132b6 743 debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)",
3c0ef626 744 pad, len, padlen, extra_pad);
745 padlen += pad;
746 extra_pad = 0;
747 }
1e608e42 748 cp = buffer_append_space(&outgoing_packet, padlen);
749 if (enc && !send_context.plaintext) {
3c0ef626 750 /* random padding */
751 for (i = 0; i < padlen; i++) {
752 if (i % 4 == 0)
7e82606e 753 rnd = arc4random();
754 cp[i] = rnd & 0xff;
755 rnd >>= 8;
3c0ef626 756 }
757 } else {
758 /* clear padding */
759 memset(cp, 0, padlen);
760 }
761 /* packet_length includes payload, padding and padding length field */
762 packet_length = buffer_len(&outgoing_packet) - 4;
1e608e42 763 cp = buffer_ptr(&outgoing_packet);
764 PUT_32BIT(cp, packet_length);
765 cp[4] = padlen;
3c0ef626 766 DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen));
767
768 /* compute MAC over seqnr and packet(length fields, payload, padding) */
769 if (mac && mac->enabled) {
7cac2b65 770 macbuf = mac_compute(mac, p_send.seqnr,
1e608e42 771 buffer_ptr(&outgoing_packet),
3c0ef626 772 buffer_len(&outgoing_packet));
7cac2b65 773 DBG(debug("done calc MAC out #%d", p_send.seqnr));
3c0ef626 774 }
775 /* encrypt packet and append to output buffer. */
1e608e42 776 cp = buffer_append_space(&output, buffer_len(&outgoing_packet));
777 cipher_crypt(&send_context, cp, buffer_ptr(&outgoing_packet),
3c0ef626 778 buffer_len(&outgoing_packet));
779 /* append unencrypted MAC */
780 if (mac && mac->enabled)
781 buffer_append(&output, (char *)macbuf, mac->mac_len);
782#ifdef PACKET_DEBUG
783 fprintf(stderr, "encrypted: ");
784 buffer_dump(&output);
785#endif
786 /* increment sequence number for outgoing packets */
7cac2b65 787 if (++p_send.seqnr == 0)
788 logit("outgoing seqnr wraps around");
789 if (++p_send.packets == 0)
790 if (!(datafellows & SSH_BUG_NOREKEY))
791 fatal("XXX too many packets with same key");
792 p_send.blocks += (packet_length + 4) / block_size;
3c0ef626 793 buffer_clear(&outgoing_packet);
794
795 if (type == SSH2_MSG_NEWKEYS)
796 set_newkeys(MODE_OUT);
2ce0bfe4 797 else if (type == SSH2_MSG_USERAUTH_SUCCESS && server_side)
798 packet_enable_delayed_compress();
3c0ef626 799}
800
7cac2b65 801static void
802packet_send2(void)
803{
804 static int rekeying = 0;
805 struct packet *p;
806 u_char type, *cp;
807
808 cp = buffer_ptr(&outgoing_packet);
809 type = cp[5];
810
811 /* during rekeying we can only send key exchange messages */
812 if (rekeying) {
813 if (!((type >= SSH2_MSG_TRANSPORT_MIN) &&
814 (type <= SSH2_MSG_TRANSPORT_MAX))) {
815 debug("enqueue packet: %u", type);
816 p = xmalloc(sizeof(*p));
817 p->type = type;
818 memcpy(&p->payload, &outgoing_packet, sizeof(Buffer));
819 buffer_init(&outgoing_packet);
820 TAILQ_INSERT_TAIL(&outgoing, p, next);
821 return;
822 }
823 }
824
825 /* rekeying starts with sending KEXINIT */
826 if (type == SSH2_MSG_KEXINIT)
827 rekeying = 1;
828
829 packet_send2_wrapped();
830
831 /* after a NEWKEYS message we can send the complete queue */
832 if (type == SSH2_MSG_NEWKEYS) {
833 rekeying = 0;
834 while ((p = TAILQ_FIRST(&outgoing))) {
835 type = p->type;
836 debug("dequeue packet: %u", type);
837 buffer_free(&outgoing_packet);
838 memcpy(&outgoing_packet, &p->payload,
839 sizeof(Buffer));
840 TAILQ_REMOVE(&outgoing, p, next);
841 xfree(p);
842 packet_send2_wrapped();
843 }
844 }
845}
846
3c0ef626 847void
1e608e42 848packet_send(void)
3c0ef626 849{
850 if (compat20)
851 packet_send2();
852 else
853 packet_send1();
854 DBG(debug("packet_send done"));
855}
856
857/*
858 * Waits until a packet has been received, and returns its type. Note that
859 * no other data is processed until this returns, so this function should not
860 * be used during the interactive session.
861 */
862
863int
1e608e42 864packet_read_seqnr(u_int32_t *seqnr_p)
3c0ef626 865{
866 int type, len;
867 fd_set *setp;
868 char buf[8192];
869 DBG(debug("packet_read()"));
870
871 setp = (fd_set *)xmalloc(howmany(connection_in+1, NFDBITS) *
872 sizeof(fd_mask));
873
874 /* Since we are blocking, ensure that all written packets have been sent. */
875 packet_write_wait();
876
877 /* Stay in the loop until we have received a complete packet. */
878 for (;;) {
879 /* Try to read a packet from the buffer. */
1e608e42 880 type = packet_read_poll_seqnr(seqnr_p);
3c0ef626 881 if (!compat20 && (
882 type == SSH_SMSG_SUCCESS
883 || type == SSH_SMSG_FAILURE
884 || type == SSH_CMSG_EOF
885 || type == SSH_CMSG_EXIT_CONFIRMATION))
1e608e42 886 packet_check_eom();
3c0ef626 887 /* If we got a packet, return it. */
888 if (type != SSH_MSG_NONE) {
889 xfree(setp);
890 return type;
891 }
892 /*
893 * Otherwise, wait for some data to arrive, add it to the
894 * buffer, and try again.
895 */
896 memset(setp, 0, howmany(connection_in + 1, NFDBITS) *
897 sizeof(fd_mask));
898 FD_SET(connection_in, setp);
899
900 /* Wait for some data to arrive. */
901 while (select(connection_in + 1, setp, NULL, NULL, NULL) == -1 &&
902 (errno == EAGAIN || errno == EINTR))
903 ;
904
905 /* Read data from the socket. */
906 len = read(connection_in, buf, sizeof(buf));
907 if (len == 0) {
7cac2b65 908 logit("Connection closed by %.200s", get_remote_ipaddr());
540d72c3 909 cleanup_exit(255);
3c0ef626 910 }
911 if (len < 0)
912 fatal("Read from socket failed: %.100s", strerror(errno));
913 /* Append it to the buffer. */
914 packet_process_incoming(buf, len);
915 }
916 /* NOTREACHED */
917}
918
1e608e42 919int
920packet_read(void)
921{
922 return packet_read_seqnr(NULL);
923}
924
3c0ef626 925/*
926 * Waits until a packet has been received, verifies that its type matches
927 * that given, and gives a fatal error and exits if there is a mismatch.
928 */
929
930void
1e608e42 931packet_read_expect(int expected_type)
3c0ef626 932{
933 int type;
934
1e608e42 935 type = packet_read();
3c0ef626 936 if (type != expected_type)
937 packet_disconnect("Protocol error: expected packet type %d, got %d",
938 expected_type, type);
939}
940
941/* Checks if a full packet is available in the data received so far via
942 * packet_process_incoming. If so, reads the packet; otherwise returns
943 * SSH_MSG_NONE. This does not wait for data from the connection.
944 *
945 * SSH_MSG_DISCONNECT is handled specially here. Also,
946 * SSH_MSG_IGNORE messages are skipped by this function and are never returned
947 * to higher levels.
3c0ef626 948 */
949
950static int
1e608e42 951packet_read_poll1(void)
3c0ef626 952{
953 u_int len, padded_len;
1e608e42 954 u_char *cp, type;
3c0ef626 955 u_int checksum, stored_checksum;
956
957 /* Check if input size is less than minimum packet size. */
958 if (buffer_len(&input) < 4 + 8)
959 return SSH_MSG_NONE;
960 /* Get length of incoming packet. */
1e608e42 961 cp = buffer_ptr(&input);
962 len = GET_32BIT(cp);
3c0ef626 963 if (len < 1 + 2 + 2 || len > 256 * 1024)
bfe49944 964 packet_disconnect("Bad packet length %u.", len);
3c0ef626 965 padded_len = (len + 8) & ~7;
966
967 /* Check if the packet has been entirely received. */
968 if (buffer_len(&input) < 4 + padded_len)
969 return SSH_MSG_NONE;
970
971 /* The entire packet is in buffer. */
972
973 /* Consume packet length. */
974 buffer_consume(&input, 4);
975
976 /*
977 * Cryptographic attack detector for ssh
978 * (C)1998 CORE-SDI, Buenos Aires Argentina
979 * Ariel Futoransky(futo@core-sdi.com)
980 */
1e608e42 981 if (!receive_context.plaintext &&
3c0ef626 982 detect_attack(buffer_ptr(&input), padded_len, NULL) == DEATTACK_DETECTED)
983 packet_disconnect("crc32 compensation attack: network attack detected");
984
985 /* Decrypt data to incoming_packet. */
986 buffer_clear(&incoming_packet);
1e608e42 987 cp = buffer_append_space(&incoming_packet, padded_len);
988 cipher_crypt(&receive_context, cp, buffer_ptr(&input), padded_len);
3c0ef626 989
990 buffer_consume(&input, padded_len);
991
992#ifdef PACKET_DEBUG
993 fprintf(stderr, "read_poll plain: ");
994 buffer_dump(&incoming_packet);
995#endif
996
997 /* Compute packet checksum. */
1e608e42 998 checksum = ssh_crc32(buffer_ptr(&incoming_packet),
3c0ef626 999 buffer_len(&incoming_packet) - 4);
1000
1001 /* Skip padding. */
1002 buffer_consume(&incoming_packet, 8 - len % 8);
1003
1004 /* Test check bytes. */
1005 if (len != buffer_len(&incoming_packet))
1e608e42 1006 packet_disconnect("packet_read_poll1: len %d != buffer_len %d.",
3c0ef626 1007 len, buffer_len(&incoming_packet));
1008
1e608e42 1009 cp = (u_char *)buffer_ptr(&incoming_packet) + len - 4;
1010 stored_checksum = GET_32BIT(cp);
3c0ef626 1011 if (checksum != stored_checksum)
1012 packet_disconnect("Corrupted check bytes on input.");
1013 buffer_consume_end(&incoming_packet, 4);
1014
1015 if (packet_compression) {
1016 buffer_clear(&compression_buffer);
1017 buffer_uncompress(&incoming_packet, &compression_buffer);
1018 buffer_clear(&incoming_packet);
1019 buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
1020 buffer_len(&compression_buffer));
1021 }
1022 type = buffer_get_char(&incoming_packet);
dfddba3d 1023 if (type < SSH_MSG_MIN || type > SSH_MSG_MAX)
1024 packet_disconnect("Invalid ssh1 packet type: %d", type);
3c0ef626 1025 return type;
1026}
1027
1028static int
1e608e42 1029packet_read_poll2(u_int32_t *seqnr_p)
3c0ef626 1030{
3c0ef626 1031 static u_int packet_length = 0;
1032 u_int padlen, need;
1e608e42 1033 u_char *macbuf, *cp, type;
2ce0bfe4 1034 u_int maclen, block_size;
3c0ef626 1035 Enc *enc = NULL;
1036 Mac *mac = NULL;
1037 Comp *comp = NULL;
1038
1039 if (newkeys[MODE_IN] != NULL) {
1040 enc = &newkeys[MODE_IN]->enc;
1041 mac = &newkeys[MODE_IN]->mac;
1042 comp = &newkeys[MODE_IN]->comp;
1043 }
1044 maclen = mac && mac->enabled ? mac->mac_len : 0;
1e608e42 1045 block_size = enc ? enc->block_size : 8;
3c0ef626 1046
1047 if (packet_length == 0) {
1048 /*
1049 * check if input size is less than the cipher block size,
1050 * decrypt first block and extract length of incoming packet
1051 */
1052 if (buffer_len(&input) < block_size)
1053 return SSH_MSG_NONE;
1054 buffer_clear(&incoming_packet);
1e608e42 1055 cp = buffer_append_space(&incoming_packet, block_size);
1056 cipher_crypt(&receive_context, cp, buffer_ptr(&input),
3c0ef626 1057 block_size);
1e608e42 1058 cp = buffer_ptr(&incoming_packet);
1059 packet_length = GET_32BIT(cp);
3c0ef626 1060 if (packet_length < 1 + 4 || packet_length > 256 * 1024) {
29d88157 1061#ifdef PACKET_DEBUG
3c0ef626 1062 buffer_dump(&incoming_packet);
29d88157 1063#endif
bfe49944 1064 packet_disconnect("Bad packet length %u.", packet_length);
3c0ef626 1065 }
bfe49944 1066 DBG(debug("input: packet len %u", packet_length+4));
3c0ef626 1067 buffer_consume(&input, block_size);
1068 }
1069 /* we have a partial packet of block_size bytes */
1070 need = 4 + packet_length - block_size;
1071 DBG(debug("partial packet %d, need %d, maclen %d", block_size,
1072 need, maclen));
1073 if (need % block_size != 0)
1074 fatal("padding error: need %d block %d mod %d",
1075 need, block_size, need % block_size);
1076 /*
1077 * check if the entire packet has been received and
1078 * decrypt into incoming_packet
1079 */
1080 if (buffer_len(&input) < need + maclen)
1081 return SSH_MSG_NONE;
1082#ifdef PACKET_DEBUG
1083 fprintf(stderr, "read_poll enc/full: ");
1084 buffer_dump(&input);
1085#endif
1e608e42 1086 cp = buffer_append_space(&incoming_packet, need);
1087 cipher_crypt(&receive_context, cp, buffer_ptr(&input), need);
3c0ef626 1088 buffer_consume(&input, need);
1089 /*
1090 * compute MAC over seqnr and packet,
1091 * increment sequence number for incoming packet
1092 */
1093 if (mac && mac->enabled) {
7cac2b65 1094 macbuf = mac_compute(mac, p_read.seqnr,
1e608e42 1095 buffer_ptr(&incoming_packet),
3c0ef626 1096 buffer_len(&incoming_packet));
1097 if (memcmp(macbuf, buffer_ptr(&input), mac->mac_len) != 0)
1098 packet_disconnect("Corrupted MAC on input.");
7cac2b65 1099 DBG(debug("MAC #%d ok", p_read.seqnr));
3c0ef626 1100 buffer_consume(&input, mac->mac_len);
1101 }
1e608e42 1102 if (seqnr_p != NULL)
7cac2b65 1103 *seqnr_p = p_read.seqnr;
1104 if (++p_read.seqnr == 0)
1105 logit("incoming seqnr wraps around");
1106 if (++p_read.packets == 0)
1107 if (!(datafellows & SSH_BUG_NOREKEY))
1108 fatal("XXX too many packets with same key");
1109 p_read.blocks += (packet_length + 4) / block_size;
3c0ef626 1110
1111 /* get padlen */
1e608e42 1112 cp = buffer_ptr(&incoming_packet);
1113 padlen = cp[4];
3c0ef626 1114 DBG(debug("input: padlen %d", padlen));
1115 if (padlen < 4)
1116 packet_disconnect("Corrupted padlen %d on input.", padlen);
1117
1118 /* skip packet size + padlen, discard padding */
1119 buffer_consume(&incoming_packet, 4 + 1);
1120 buffer_consume_end(&incoming_packet, padlen);
1121
1122 DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet)));
1123 if (comp && comp->enabled) {
1124 buffer_clear(&compression_buffer);
1125 buffer_uncompress(&incoming_packet, &compression_buffer);
1126 buffer_clear(&incoming_packet);
1127 buffer_append(&incoming_packet, buffer_ptr(&compression_buffer),
1128 buffer_len(&compression_buffer));
d03f4262 1129 DBG(debug("input: len after de-compress %d",
1130 buffer_len(&incoming_packet)));
3c0ef626 1131 }
1132 /*
1133 * get packet type, implies consume.
1134 * return length of payload (without type field)
1135 */
1136 type = buffer_get_char(&incoming_packet);
dfddba3d 1137 if (type < SSH2_MSG_MIN || type >= SSH2_MSG_LOCAL_MIN)
1138 packet_disconnect("Invalid ssh2 packet type: %d", type);
3c0ef626 1139 if (type == SSH2_MSG_NEWKEYS)
1140 set_newkeys(MODE_IN);
2ce0bfe4 1141 else if (type == SSH2_MSG_USERAUTH_SUCCESS && !server_side)
1142 packet_enable_delayed_compress();
3c0ef626 1143#ifdef PACKET_DEBUG
1144 fprintf(stderr, "read/plain[%d]:\r\n", type);
1145 buffer_dump(&incoming_packet);
1146#endif
1147 /* reset for next packet */
1148 packet_length = 0;
1149 return type;
1150}
1151
1152int
1e608e42 1153packet_read_poll_seqnr(u_int32_t *seqnr_p)
3c0ef626 1154{
276b07a3 1155 u_int reason, seqnr;
3c0ef626 1156 u_char type;
1157 char *msg;
1158
1159 for (;;) {
1160 if (compat20) {
1e608e42 1161 type = packet_read_poll2(seqnr_p);
3c0ef626 1162 if (type)
1163 DBG(debug("received packet type %d", type));
1e608e42 1164 switch (type) {
3c0ef626 1165 case SSH2_MSG_IGNORE:
1166 break;
1167 case SSH2_MSG_DEBUG:
1168 packet_get_char();
1169 msg = packet_get_string(NULL);
1170 debug("Remote: %.900s", msg);
1171 xfree(msg);
1172 msg = packet_get_string(NULL);
1173 xfree(msg);
1174 break;
1175 case SSH2_MSG_DISCONNECT:
1176 reason = packet_get_int();
1177 msg = packet_get_string(NULL);
7cac2b65 1178 logit("Received disconnect from %s: %u: %.400s",
276b07a3 1179 get_remote_ipaddr(), reason, msg);
3c0ef626 1180 xfree(msg);
540d72c3 1181 cleanup_exit(255);
3c0ef626 1182 break;
1e608e42 1183 case SSH2_MSG_UNIMPLEMENTED:
1184 seqnr = packet_get_int();
276b07a3 1185 debug("Received SSH2_MSG_UNIMPLEMENTED for %u",
1186 seqnr);
1e608e42 1187 break;
3c0ef626 1188 default:
1189 return type;
1190 break;
1191 }
1192 } else {
1e608e42 1193 type = packet_read_poll1();
1194 switch (type) {
3c0ef626 1195 case SSH_MSG_IGNORE:
1196 break;
1197 case SSH_MSG_DEBUG:
1198 msg = packet_get_string(NULL);
1199 debug("Remote: %.900s", msg);
1200 xfree(msg);
1201 break;
1202 case SSH_MSG_DISCONNECT:
1203 msg = packet_get_string(NULL);
7cac2b65 1204 logit("Received disconnect from %s: %.400s",
276b07a3 1205 get_remote_ipaddr(), msg);
540d72c3 1206 cleanup_exit(255);
3c0ef626 1207 xfree(msg);
1208 break;
1209 default:
1210 if (type)
1211 DBG(debug("received packet type %d", type));
1212 return type;
1213 break;
1214 }
1215 }
1216 }
1217}
1218
1e608e42 1219int
1220packet_read_poll(void)
1221{
1222 return packet_read_poll_seqnr(NULL);
1223}
1224
3c0ef626 1225/*
1226 * Buffers the given amount of input characters. This is intended to be used
1227 * together with packet_read_poll.
1228 */
1229
1230void
1231packet_process_incoming(const char *buf, u_int len)
1232{
1233 buffer_append(&input, buf, len);
1234}
1235
1236/* Returns a character from the packet. */
1237
1238u_int
1e608e42 1239packet_get_char(void)
3c0ef626 1240{
1241 char ch;
d03f4262 1242
3c0ef626 1243 buffer_get(&incoming_packet, &ch, 1);
1244 return (u_char) ch;
1245}
1246
1247/* Returns an integer from the packet data. */
1248
1249u_int
1e608e42 1250packet_get_int(void)
3c0ef626 1251{
1252 return buffer_get_int(&incoming_packet);
1253}
1254
1255/*
1256 * Returns an arbitrary precision integer from the packet data. The integer
1257 * must have been initialized before this call.
1258 */
1259
1260void
1e608e42 1261packet_get_bignum(BIGNUM * value)
3c0ef626 1262{
1e608e42 1263 buffer_get_bignum(&incoming_packet, value);
3c0ef626 1264}
1265
1266void
1e608e42 1267packet_get_bignum2(BIGNUM * value)
3c0ef626 1268{
1e608e42 1269 buffer_get_bignum2(&incoming_packet, value);
3c0ef626 1270}
1271
1e608e42 1272void *
2ce0bfe4 1273packet_get_raw(u_int *length_ptr)
3c0ef626 1274{
2ce0bfe4 1275 u_int bytes = buffer_len(&incoming_packet);
d03f4262 1276
3c0ef626 1277 if (length_ptr != NULL)
1278 *length_ptr = bytes;
1279 return buffer_ptr(&incoming_packet);
1280}
1281
1282int
1283packet_remaining(void)
1284{
1285 return buffer_len(&incoming_packet);
1286}
1287
1288/*
1289 * Returns a string from the packet data. The string is allocated using
1290 * xmalloc; it is the responsibility of the calling program to free it when
1291 * no longer needed. The length_ptr argument may be NULL, or point to an
1292 * integer into which the length of the string is stored.
1293 */
1294
1e608e42 1295void *
3c0ef626 1296packet_get_string(u_int *length_ptr)
1297{
1298 return buffer_get_string(&incoming_packet, length_ptr);
1299}
1300
1301/*
1302 * Sends a diagnostic message from the server to the client. This message
1303 * can be sent at any time (but not while constructing another message). The
1304 * message is printed immediately, but only if the client is being executed
1305 * in verbose mode. These messages are primarily intended to ease debugging
1306 * authentication problems. The length of the formatted message must not
1307 * exceed 1024 bytes. This will automatically call packet_write_wait.
1308 */
1309
1310void
1311packet_send_debug(const char *fmt,...)
1312{
1313 char buf[1024];
1314 va_list args;
1315
1316 if (compat20 && (datafellows & SSH_BUG_DEBUG))
1317 return;
1318
1319 va_start(args, fmt);
1320 vsnprintf(buf, sizeof(buf), fmt, args);
1321 va_end(args);
1322
1323 if (compat20) {
1324 packet_start(SSH2_MSG_DEBUG);
1325 packet_put_char(0); /* bool: always display */
1326 packet_put_cstring(buf);
1327 packet_put_cstring("");
1328 } else {
1329 packet_start(SSH_MSG_DEBUG);
1330 packet_put_cstring(buf);
1331 }
1332 packet_send();
1333 packet_write_wait();
1334}
1335
1336/*
1337 * Logs the error plus constructs and sends a disconnect packet, closes the
1338 * connection, and exits. This function never returns. The error message
1339 * should not contain a newline. The length of the formatted message must
1340 * not exceed 1024 bytes.
1341 */
1342
1343void
1344packet_disconnect(const char *fmt,...)
1345{
1346 char buf[1024];
1347 va_list args;
1348 static int disconnecting = 0;
d03f4262 1349
3c0ef626 1350 if (disconnecting) /* Guard against recursive invocations. */
1351 fatal("packet_disconnect called recursively.");
1352 disconnecting = 1;
1353
1354 /*
1355 * Format the message. Note that the caller must make sure the
1356 * message is of limited size.
1357 */
1358 va_start(args, fmt);
1359 vsnprintf(buf, sizeof(buf), fmt, args);
1360 va_end(args);
1361
bfe49944 1362 /* Display the error locally */
7cac2b65 1363 logit("Disconnecting: %.100s", buf);
bfe49944 1364
3c0ef626 1365 /* Send the disconnect message to the other side, and wait for it to get sent. */
1366 if (compat20) {
1367 packet_start(SSH2_MSG_DISCONNECT);
1368 packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR);
1369 packet_put_cstring(buf);
1370 packet_put_cstring("");
1371 } else {
1372 packet_start(SSH_MSG_DISCONNECT);
1373 packet_put_cstring(buf);
1374 }
1375 packet_send();
1376 packet_write_wait();
1377
1378 /* Stop listening for connections. */
1379 channel_close_all();
1380
1381 /* Close the connection. */
1382 packet_close();
540d72c3 1383 cleanup_exit(255);
3c0ef626 1384}
1385
1386/* Checks if there is any buffered output, and tries to write some of the output. */
1387
1388void
1e608e42 1389packet_write_poll(void)
3c0ef626 1390{
1391 int len = buffer_len(&output);
d03f4262 1392
3c0ef626 1393 if (len > 0) {
1394 len = write(connection_out, buffer_ptr(&output), len);
1395 if (len <= 0) {
1396 if (errno == EAGAIN)
1397 return;
1398 else
1399 fatal("Write failed: %.100s", strerror(errno));
1400 }
1401 buffer_consume(&output, len);
1402 }
1403}
1404
1405/*
1406 * Calls packet_write_poll repeatedly until all pending output data has been
1407 * written.
1408 */
1409
1410void
1e608e42 1411packet_write_wait(void)
3c0ef626 1412{
1413 fd_set *setp;
1414
1415 setp = (fd_set *)xmalloc(howmany(connection_out + 1, NFDBITS) *
1416 sizeof(fd_mask));
1417 packet_write_poll();
1418 while (packet_have_data_to_write()) {
1419 memset(setp, 0, howmany(connection_out + 1, NFDBITS) *
1420 sizeof(fd_mask));
1421 FD_SET(connection_out, setp);
1422 while (select(connection_out + 1, NULL, setp, NULL, NULL) == -1 &&
1423 (errno == EAGAIN || errno == EINTR))
1424 ;
1425 packet_write_poll();
1426 }
1427 xfree(setp);
1428}
1429
1430/* Returns true if there is buffered data to write to the connection. */
1431
1432int
1e608e42 1433packet_have_data_to_write(void)
3c0ef626 1434{
1435 return buffer_len(&output) != 0;
1436}
1437
1438/* Returns true if there is not too much data to write to the connection. */
1439
1440int
1e608e42 1441packet_not_very_much_data_to_write(void)
3c0ef626 1442{
1443 if (interactive_mode)
1444 return buffer_len(&output) < 16384;
1445 else
1446 return buffer_len(&output) < 128 * 1024;
1447}
1448
7cac2b65 1449
bfe49944 1450static void
1451packet_set_tos(int interactive)
1452{
540d72c3 1453#if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
bfe49944 1454 int tos = interactive ? IPTOS_LOWDELAY : IPTOS_THROUGHPUT;
1455
1456 if (!packet_connection_is_on_socket() ||
1457 !packet_connection_is_ipv4())
1458 return;
1459 if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, &tos,
1460 sizeof(tos)) < 0)
1461 error("setsockopt IP_TOS %d: %.100s:",
1462 tos, strerror(errno));
7cac2b65 1463#endif
540d72c3 1464}
bfe49944 1465
3c0ef626 1466/* Informs that the current session is interactive. Sets IP flags for that. */
1467
1468void
1469packet_set_interactive(int interactive)
1470{
1471 static int called = 0;
3c0ef626 1472
1473 if (called)
1474 return;
1475 called = 1;
1476
1477 /* Record that we are in interactive mode. */
1478 interactive_mode = interactive;
1479
1480 /* Only set socket options if using a socket. */
1481 if (!packet_connection_is_on_socket())
7cac2b65 1482 return;
bfe49944 1483 if (interactive)
1e608e42 1484 set_nodelay(connection_in);
bfe49944 1485 packet_set_tos(interactive);
3c0ef626 1486}
1487
1488/* Returns true if the current connection is interactive. */
1489
1490int
1e608e42 1491packet_is_interactive(void)
3c0ef626 1492{
1493 return interactive_mode;
1494}
1495
7e82606e 1496int
7cac2b65 1497packet_set_maxsize(u_int s)
3c0ef626 1498{
1499 static int called = 0;
d03f4262 1500
3c0ef626 1501 if (called) {
7cac2b65 1502 logit("packet_set_maxsize: called twice: old %d new %d",
3c0ef626 1503 max_packet_size, s);
1504 return -1;
1505 }
1506 if (s < 4 * 1024 || s > 1024 * 1024) {
7cac2b65 1507 logit("packet_set_maxsize: bad size %d", s);
3c0ef626 1508 return -1;
1509 }
1510 called = 1;
1511 debug("packet_set_maxsize: setting to %d", s);
1512 max_packet_size = s;
1513 return s;
1514}
1515
1516/* roundup current message to pad bytes */
1517void
1518packet_add_padding(u_char pad)
1519{
1520 extra_pad = pad;
1521}
1522
1523/*
1524 * 9.2. Ignored Data Message
1525 *
1526 * byte SSH_MSG_IGNORE
1527 * string data
1528 *
1529 * All implementations MUST understand (and ignore) this message at any
1530 * time (after receiving the protocol version). No implementation is
1531 * required to send them. This message can be used as an additional
1532 * protection measure against advanced traffic analysis techniques.
1533 */
1534void
1535packet_send_ignore(int nbytes)
1536{
7e82606e 1537 u_int32_t rnd = 0;
3c0ef626 1538 int i;
1539
1540 packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE);
1541 packet_put_int(nbytes);
1e608e42 1542 for (i = 0; i < nbytes; i++) {
3c0ef626 1543 if (i % 4 == 0)
7e82606e 1544 rnd = arc4random();
1545 packet_put_char(rnd & 0xff);
1546 rnd >>= 8;
3c0ef626 1547 }
1548}
473db5ab 1549int rekey_requested = 0;
1550
1551void
1552packet_request_rekeying(void)
1553{
1554 rekey_requested = 1;
1555}
7cac2b65 1556
7e82606e 1557#define MAX_PACKETS (1U<<31)
7cac2b65 1558int
1559packet_need_rekeying(void)
1560{
1561 if (datafellows & SSH_BUG_NOREKEY)
1562 return 0;
473db5ab 1563 if (rekey_requested == 1)
1564 {
1565 rekey_requested = 0;
1566 return 1;
1567 }
7cac2b65 1568 return
1569 (p_send.packets > MAX_PACKETS) ||
1570 (p_read.packets > MAX_PACKETS) ||
1571 (max_blocks_out && (p_send.blocks > max_blocks_out)) ||
1572 (max_blocks_in && (p_read.blocks > max_blocks_in));
1573}
1574
1575void
1576packet_set_rekey_limit(u_int32_t bytes)
1577{
1578 rekey_limit = bytes;
1579}
2ce0bfe4 1580
1581void
1582packet_set_server(void)
1583{
1584 server_side = 1;
1585}
1586
1587void
1588packet_set_authenticated(void)
1589{
1590 after_authentication = 1;
1591}
This page took 1.1828 seconds and 5 git commands to generate.