[gssapi-openssh.git] / openssh / Makefile.in

# $Id$

prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
sbindir=@sbindir@
libexecdir=@libexecdir@
datadir=@datadir@
mandir=@mandir@
mansubdir=@mansubdir@
sysconfdir=@sysconfdir@
piddir=@piddir@
srcdir=@srcdir@
top_srcdir=@top_srcdir@

DESTDIR=
VPATH=@srcdir@
SSH_PROGRAM=@bindir@/ssh
ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
SFTP_SERVER=$(libexecdir)/sftp-server

PATHS= -DSSHDIR=\"$(sysconfdir)\" \
	-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
	-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
	-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
	-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
	-DSSH_RAND_HELPER=\"$(libexecdir)/ssh-rand-helper\"

CC=@CC@
LD=@LD@
CFLAGS=@CFLAGS@
CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
LIBS=@LIBS@
LIBPAM=@LIBPAM@
LIBWRAP=@LIBWRAP@
AR=@AR@
RANLIB=@RANLIB@
INSTALL=@INSTALL@
PERL=@PERL@
ENT=@ENT@
XAUTH_PATH=@XAUTH_PATH@
LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
EXEEXT=@EXEEXT@
SSH_MODE= @SSHMODE@

INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@
INSTALL_SSH_RAND_HELPER=@INSTALL_SSH_RAND_HELPER@

@NO_SFTP@SFTP_PROGS=sftp-server$(EXEEXT) sftp$(EXEEXT)

TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} $(SFTP_PROGS)

LIBSSH_OBJS=atomicio.o authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o dh.o dispatch.o fatal.o mac.o hostfile.o key.o kex.o kexdh.o kexgex.o log.o match.o misc.o mpaux.o nchan.o packet.o radix.o rijndael.o entropy.o readpass.o rsa.o scard.o ssh-dss.o ssh-rsa.o tildexpand.o ttymodes.o uidswap.o uuencode.o xmalloc.o kexgss.o gss-genr.o

SSHOBJS= ssh.o sshconnect.o sshconnect1.o sshconnect2.o sshtty.o readconf.o clientloop.o

SSHDOBJS= sshd.o auth.o auth1.o auth2.o auth-chall.o auth2-chall.o auth-rhosts.o auth-options.o auth-krb4.o auth-krb5.o auth-pam.o auth2-pam.o auth-passwd.o auth-rsa.o auth-rh-rsa.o auth-sia.o sshpty.o sshlogin.o loginrec.o servconf.o serverloop.o md5crypt.o session.o groupaccess.o auth-skey.o auth-bsdauth.o gss-serv.o

MANPAGES	= scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out
MANPAGES_IN	= scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1
MANTYPE		= @MANTYPE@

CONFIGFILES=sshd_config.out ssh_config.out moduli.out
CONFIGFILES_IN=sshd_config ssh_config moduli

PATHSUBS	= \
	-D/etc/ssh/ssh_config=$(sysconfdir)/ssh_config \
	-D/etc/ssh/ssh_known_hosts=$(sysconfdir)/ssh_known_hosts \
	-D/etc/ssh/sshd_config=$(sysconfdir)/sshd_config \
	-D/usr/libexec=$(libexecdir) \
	-D/etc/shosts.equiv=$(sysconfdir)/shosts.equiv \
	-D/etc/ssh/ssh_host_key=$(sysconfdir)/ssh_host_key \
	-D/etc/ssh/ssh_host_dsa_key=$(sysconfdir)/ssh_host_dsa_key \
	-D/etc/ssh/ssh_host_rsa_key=$(sysconfdir)/ssh_host_rsa_key \
	-D/var/run/sshd.pid=$(piddir)/sshd.pid \
	-D/etc/ssh/moduli=$(sysconfdir)/moduli \
	-D/etc/ssh/sshrc=$(sysconfdir)/sshrc \
	-D/usr/X11R6/bin/xauth=$(XAUTH_PATH) \
	-D/usr/bin:/bin:/usr/sbin:/sbin=@user_path@

FIXPATHSCMD	= $(PERL) $(srcdir)/fixpaths $(PATHSUBS)

all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)

$(LIBSSH_OBJS): config.h
$(SSHOBJS): config.h
$(SSHDOBJS): config.h

.c.o:
	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<

LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
$(LIBCOMPAT): always
	(cd openbsd-compat && $(MAKE))
always:

libssh.a: $(LIBSSH_OBJS)
	$(AR) rv $@ $(LIBSSH_OBJS)
	$(RANLIB) $@

ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
	$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

sshd$(EXEEXT): libssh.a	$(LIBCOMPAT) $(SSHDOBJS)
	$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBWRAP) $(LIBPAM) $(LIBS)

scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o
	$(LD) -o $@ scp.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
	$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
	$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) 

sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
	$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) 

sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o
	$(LD) -o $@ sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o
	$(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)

# test driver for the loginrec code - not built by default
logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
	$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)

$(MANPAGES): $(MANPAGES_IN)
	if test "$(MANTYPE)" = "cat"; then \
		manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \
	else \
		manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \
	fi; \
	if test "$(MANTYPE)" = "man"; then \
		$(FIXPATHSCMD) $${manpage} | $(PERL) $(srcdir)/mdoc2man.pl > $@; \
	else \
		$(FIXPATHSCMD) $${manpage} > $@; \
	fi

$(CONFIGFILES): $(CONFIGFILES_IN)
	conffile=`echo $@ | sed 's/.out$$//'`; \
	$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@

clean:
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
	rm -f *.out core 
	(cd openbsd-compat && $(MAKE) clean)

distclean:
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
	rm -f *.out core
	rm -f Makefile config.h config.status ssh_prng_cmds *~
	rm -rf autom4te.cache
	(cd openbsd-compat && $(MAKE) distclean)
	(cd scard && $(MAKE) distclean)

veryclean:
	rm -f configure config.h.in *.0
	rm -f *.o *.a $(TARGETS) logintest config.cache config.log 
	rm -f *.out core
	rm -f Makefile config.h config.status ssh_prng_cmds *~
	(cd openbsd-compat && $(MAKE) distclean)
	(cd scard && $(MAKE) distclean)

mrproper: distclean

catman-do:
	@for f in $(MANPAGES_IN) ; do \
		base=`echo $$f | sed 's/\..*$$//'` ; \
		echo "$$f -> $$base.0" ; \
		nroff -mandoc $$f | cat -v | sed -e 's/.\^H//g' \
			>$$base.0 ; \
	done

distprep: catman-do
	autoreconf
	(cd scard && $(MAKE) -f Makefile.in distprep)

install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files host-key
install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files

scard-install:
	(cd scard && $(MAKE) DESTDIR=$(DESTDIR) install)

install-files: scard-install
	$(srcdir)/mkinstalldirs $(DESTDIR)$(bindir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(datadir)
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1
	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8
	$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
	$(INSTALL) -m $(SSH_MODE) -s ssh $(DESTDIR)$(bindir)/ssh
	$(INSTALL) -m 0755 -s scp $(DESTDIR)$(bindir)/scp
	$(INSTALL) -m 0755 -s ssh-add $(DESTDIR)$(bindir)/ssh-add
	$(INSTALL) -m 0755 -s ssh-agent $(DESTDIR)$(bindir)/ssh-agent
	$(INSTALL) -m 0755 -s ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
	$(INSTALL) -m 0755 -s ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
	$(INSTALL) -m 0755 -s sshd $(DESTDIR)$(sbindir)/sshd
	if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \
		$(INSTALL) -m 0755 -s ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper ; \
	fi
	@NO_SFTP@$(INSTALL) -m 0755 -s sftp $(DESTDIR)$(bindir)/sftp
	@NO_SFTP@$(INSTALL) -m 0755 -s sftp-server $(DESTDIR)$(SFTP_SERVER)
	$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	@NO_SFTP@$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	@NO_SFTP@$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	-rm -f $(DESTDIR)$(bindir)/slogin
	ln -s ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
	ln -s ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
	if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
		$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
		$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
		$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
	fi
	if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
		$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
		if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
			$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
		else \
			echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
		fi ; \
	fi
	if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
		if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
			echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
			mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
		else \
			$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
		fi ; \
	else \
		echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
	fi

host-key: ssh-keygen$(EXEEXT)
	if [ -z "$(DESTDIR)" ] ; then \
		if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \
		else \
			./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \
		fi ; \
		if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
		else \
			./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \
		fi ; \
		if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \
			echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
		else \
			./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \
		fi ; \
	fi ;

host-key-force: ssh-keygen$(EXEEXT)
	./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
	./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
	./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""

uninstallall:	uninstall
	-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
	-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
	-rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
	-rmdir $(DESTDIR)$(sysconfdir)
	-rmdir $(DESTDIR)$(bindir)
	-rmdir $(DESTDIR)$(sbindir)
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
	-rmdir $(DESTDIR)$(mandir)
	-rmdir $(DESTDIR)$(libexecdir)

uninstall: 
	-rm -f $(DESTDIR)$(bindir)/slogin
	-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
	-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
	-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
	-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
Commit	Line	Data
3c0ef626	1	# $Id$
	2
	3	prefix=@prefix@
	4	exec_prefix=@exec_prefix@
	5	bindir=@bindir@
	6	sbindir=@sbindir@
	7	libexecdir=@libexecdir@
	8	datadir=@datadir@
	9	mandir=@mandir@
	10	mansubdir=@mansubdir@
	11	sysconfdir=@sysconfdir@
	12	piddir=@piddir@
	13	srcdir=@srcdir@
	14	top_srcdir=@top_srcdir@
	15
	16	DESTDIR=
	17	VPATH=@srcdir@
	18	SSH_PROGRAM=@bindir@/ssh
	19	ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass
	20	SFTP_SERVER=$(libexecdir)/sftp-server
	21
e9702f7d	22	PATHS= -DSSHDIR=\"$(sysconfdir)\" \
3c0ef626	23	-D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
	24	-D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \
	25	-D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \
e9702f7d	26	-D_PATH_SSH_PIDDIR=\"$(piddir)\" \
e9702f7d	27	-DSSH_RAND_HELPER=\"$(libexecdir)/ssh-rand-helper\"
3c0ef626	28
	29	CC=@CC@
	30	LD=@LD@
	31	CFLAGS=@CFLAGS@
	32	CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@
	33	LIBS=@LIBS@
e9702f7d	34	LIBPAM=@LIBPAM@
e9702f7d	35	LIBWRAP=@LIBWRAP@
3c0ef626	36	AR=@AR@
	37	RANLIB=@RANLIB@
	38	INSTALL=@INSTALL@
	39	PERL=@PERL@
	40	ENT=@ENT@
	41	XAUTH_PATH=@XAUTH_PATH@
	42	LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@
	43	EXEEXT=@EXEEXT@
	44	SSH_MODE= @SSHMODE@
	45
	46	INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@
e9702f7d	47	INSTALL_SSH_RAND_HELPER=@INSTALL_SSH_RAND_HELPER@
3c0ef626	48
	49	@NO_SFTP@SFTP_PROGS=sftp-server$(EXEEXT) sftp$(EXEEXT)
	50
e9702f7d	51	TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} $(SFTP_PROGS)
3c0ef626	52
905081a4	53	LIBSSH_OBJS=atomicio.o authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o cipher.o compat.o compress.o crc32.o deattack.o dh.o dispatch.o fatal.o mac.o hostfile.o key.o kex.o kexdh.o kexgex.o log.o match.o misc.o mpaux.o nchan.o packet.o radix.o rijndael.o entropy.o readpass.o rsa.o scard.o ssh-dss.o ssh-rsa.o tildexpand.o ttymodes.o uidswap.o uuencode.o xmalloc.o kexgss.o gss-genr.o
3c0ef626	54
	55	SSHOBJS= ssh.o sshconnect.o sshconnect1.o sshconnect2.o sshtty.o readconf.o clientloop.o
	56
5598e598	57	SSHDOBJS= sshd.o auth.o auth1.o auth2.o auth-chall.o auth2-chall.o auth-rhosts.o auth-options.o auth-krb4.o auth-krb5.o auth-pam.o auth2-pam.o auth-passwd.o auth-rsa.o auth-rh-rsa.o auth-sia.o sshpty.o sshlogin.o loginrec.o servconf.o serverloop.o md5crypt.o session.o groupaccess.o auth-skey.o auth-bsdauth.o gss-serv.o
3c0ef626	58
	59	MANPAGES = scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out
	60	MANPAGES_IN = scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1
	61	MANTYPE = @MANTYPE@
	62
	63	CONFIGFILES=sshd_config.out ssh_config.out moduli.out
	64	CONFIGFILES_IN=sshd_config ssh_config moduli
	65
	66	PATHSUBS = \
e9702f7d	67	-D/etc/ssh/ssh_config=$(sysconfdir)/ssh_config \
	68	-D/etc/ssh/ssh_known_hosts=$(sysconfdir)/ssh_known_hosts \
	69	-D/etc/ssh/sshd_config=$(sysconfdir)/sshd_config \
3c0ef626	70	-D/usr/libexec=$(libexecdir) \
3c0ef626	71	-D/etc/shosts.equiv=$(sysconfdir)/shosts.equiv \
e9702f7d	72	-D/etc/ssh/ssh_host_key=$(sysconfdir)/ssh_host_key \
	73	-D/etc/ssh/ssh_host_dsa_key=$(sysconfdir)/ssh_host_dsa_key \
	74	-D/etc/ssh/ssh_host_rsa_key=$(sysconfdir)/ssh_host_rsa_key \
3c0ef626	75	-D/var/run/sshd.pid=$(piddir)/sshd.pid \
e9702f7d	76	-D/etc/ssh/moduli=$(sysconfdir)/moduli \
e9702f7d	77	-D/etc/ssh/sshrc=$(sysconfdir)/sshrc \
3c0ef626	78	-D/usr/X11R6/bin/xauth=$(XAUTH_PATH) \
	79	-D/usr/bin:/bin:/usr/sbin:/sbin=@user_path@
	80
	81	FIXPATHSCMD = $(PERL) $(srcdir)/fixpaths $(PATHSUBS)
	82
	83	all: $(CONFIGFILES) $(MANPAGES) $(TARGETS)
	84
	85	$(LIBSSH_OBJS): config.h
	86	$(SSHOBJS): config.h
	87	$(SSHDOBJS): config.h
	88
	89	.c.o:
	90	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<
	91
	92	LIBCOMPAT=openbsd-compat/libopenbsd-compat.a
	93	$(LIBCOMPAT): always
	94	(cd openbsd-compat && $(MAKE))
	95	always:
	96
	97	libssh.a: $(LIBSSH_OBJS)
	98	$(AR) rv $@ $(LIBSSH_OBJS)
	99	$(RANLIB) $@
	100
	101	ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS)
	102	$(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	103
	104	sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS)
e9702f7d	105	$(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBWRAP) $(LIBPAM) $(LIBS)
3c0ef626	106
	107	scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o
	108	$(LD) -o $@ scp.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	109
	110	ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o
	111	$(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	112
	113	ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o
	114	$(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	115
	116	ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o
	117	$(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	118
	119	ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o
	120	$(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
	121
	122	sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o
	123	$(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	124
	125	sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-int.o sftp-common.o sftp-glob.o
	126	$(LD) -o $@ sftp.o sftp-client.o sftp-common.o sftp-int.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	127
e9702f7d	128	ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o
	129	$(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
	130
3c0ef626	131	# test driver for the loginrec code - not built by default
	132	logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o
	133	$(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS)
	134
	135	$(MANPAGES): $(MANPAGES_IN)
	136	if test "$(MANTYPE)" = "cat"; then \
	137	manpage=$(srcdir)/`echo $@ \| sed 's/\.[1-9]\.out$$/\.0/'`; \
	138	else \
	139	manpage=$(srcdir)/`echo $@ \| sed 's/\.out$$//'`; \
	140	fi; \
	141	if test "$(MANTYPE)" = "man"; then \
	142	$(FIXPATHSCMD) $${manpage} \| $(PERL) $(srcdir)/mdoc2man.pl > $@; \
	143	else \
	144	$(FIXPATHSCMD) $${manpage} > $@; \
	145	fi
	146
	147	$(CONFIGFILES): $(CONFIGFILES_IN)
	148	conffile=`echo $@ \| sed 's/.out$$//'`; \
	149	$(FIXPATHSCMD) $(srcdir)/$${conffile} > $@
	150
	151	clean:
	152	rm -f .o .a $(TARGETS) logintest config.cache config.log
	153	rm -f *.out core
	154	(cd openbsd-compat && $(MAKE) clean)
	155
	156	distclean:
	157	rm -f .o .a $(TARGETS) logintest config.cache config.log
	158	rm -f *.out core
	159	rm -f Makefile config.h config.status ssh_prng_cmds *~
	160	rm -rf autom4te.cache
	161	(cd openbsd-compat && $(MAKE) distclean)
	162	(cd scard && $(MAKE) distclean)
	163
	164	veryclean:
	165	rm -f configure config.h.in *.0
	166	rm -f .o .a $(TARGETS) logintest config.cache config.log
	167	rm -f *.out core
	168	rm -f Makefile config.h config.status ssh_prng_cmds *~
	169	(cd openbsd-compat && $(MAKE) distclean)
	170	(cd scard && $(MAKE) distclean)
	171
	172	mrproper: distclean
	173
	174	catman-do:
	175	@for f in $(MANPAGES_IN) ; do \
	176	base=`echo $$f \| sed 's/\..*$$//'` ; \
	177	echo "$$f -> $$base.0" ; \
	178	nroff -mandoc $$f \| cat -v \| sed -e 's/.\^H//g' \
	179	>$$base.0 ; \
	180	done
	181
	182	distprep: catman-do
	183	autoreconf
	184	(cd scard && $(MAKE) -f Makefile.in distprep)
	185
	186	install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files host-key
	187	install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files
	188
	189	scard-install:
	190	(cd scard && $(MAKE) DESTDIR=$(DESTDIR) install)
	191
	192	install-files: scard-install
	193	$(srcdir)/mkinstalldirs $(DESTDIR)$(bindir)
	194	$(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir)
195	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)
196	$(srcdir)/mkinstalldirs $(DESTDIR)$(datadir)
197	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1
198	$(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8
199	$(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir)
200	$(INSTALL) -m $(SSH_MODE) -s ssh $(DESTDIR)$(bindir)/ssh
201	$(INSTALL) -m 0755 -s scp $(DESTDIR)$(bindir)/scp
202	$(INSTALL) -m 0755 -s ssh-add $(DESTDIR)$(bindir)/ssh-add
203	$(INSTALL) -m 0755 -s ssh-agent $(DESTDIR)$(bindir)/ssh-agent
204	$(INSTALL) -m 0755 -s ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen
205	$(INSTALL) -m 0755 -s ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan
206	$(INSTALL) -m 0755 -s sshd $(DESTDIR)$(sbindir)/sshd
e9702f7d	207	if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \
	208	$(INSTALL) -m 0755 -s ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper ; \
	209	fi
3c0ef626	210	@NO_SFTP@$(INSTALL) -m 0755 -s sftp $(DESTDIR)$(bindir)/sftp
	211	@NO_SFTP@$(INSTALL) -m 0755 -s sftp-server $(DESTDIR)$(SFTP_SERVER)
	212	$(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
	213	$(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
	214	$(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
	215	$(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
	216	$(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
	217	$(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
	218	$(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
	219	@NO_SFTP@$(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
	220	@NO_SFTP@$(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
	221	-rm -f $(DESTDIR)$(bindir)/slogin
	222	ln -s ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin
	223	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
	224	ln -s ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1
3c0ef626	225	if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
	226	$(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
	227	fi
	228	if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
	229	$(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
	230	else \
	231	echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
	232	fi
	233	if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
	234	$(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
	235	else \
	236	echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
	237	fi
	238	if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
	239	$(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \
	240	if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
	241	$(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
	242	else \
	243	echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
	244	fi ; \
	245	fi
	246	if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
	247	if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
	248	echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
	249	mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
	250	else \
	251	$(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
	252	fi ; \
	253	else \
	254	echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
	255	fi
	256
	257	host-key: ssh-keygen$(EXEEXT)
	258	if [ -z "$(DESTDIR)" ] ; then \
	259	if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \
	260	echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \
	261	else \
	262	./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \
	263	fi ; \
	264	if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \
	265	echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
	266	else \
	267	./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \
	268	fi ; \
	269	if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \
	270	echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
	271	else \
	272	./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \
	273	fi ; \
	274	fi ;
	275
	276	host-key-force: ssh-keygen$(EXEEXT)
	277	./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
	278	./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
	279	./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
	280
	281	uninstallall: uninstall
	282	-rm -f $(DESTDIR)$(sysconfdir)/ssh_config
	283	-rm -f $(DESTDIR)$(sysconfdir)/sshd_config
	284	-rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
	285	-rmdir $(DESTDIR)$(sysconfdir)
	286	-rmdir $(DESTDIR)$(bindir)
	287	-rmdir $(DESTDIR)$(sbindir)
	288	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)1
289	-rmdir $(DESTDIR)$(mandir)/$(mansubdir)8
290	-rmdir $(DESTDIR)$(mandir)
291	-rmdir $(DESTDIR)$(libexecdir)
292
293	uninstall:
294	-rm -f $(DESTDIR)$(bindir)/slogin
295	-rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT)
296	-rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT)
297	-rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT)
298	-rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT)
299	-rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
300	-rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
301	-rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
302	-rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
303	-rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT)
304	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
305	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
306	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
307	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1
308	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1
309	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1
310	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1
311	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8
312	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
313	-rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1